Orodje Test nakup rabljenega (12.714)

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Gtodpfx Aox Eaxbjd Aew Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-cooled The CW‑60/5.5 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description: With this climate test chamber, the functionality and material properties of a test object can be evaluated under the influence of temperature and humidity. The chamber features efficient air circulation and a high recirculation volume, ensuring optimum transfer to the test item. The air handling system is located at the rear of the interior chamber. Major components are mounted in a separate frame behind the unit for easy access. Control equipment is housed in an independent control cabinet, with the operator panel installed in the cabinet door. To ensure dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test area can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K (over time) - Temperature change rate (linear, with test specimen and radiant load, measured at air inlet): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±1% to ±3% rH (over time) Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, with no test specimen, no external radiant load, and without additional equipment. Dimensions: Internal (test or usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection rating: IP 54 Gtsdpfx Asx D Abpjd Aew Technical Features: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmental-friendly refrigerants R 23 / R 404 A Notes: - Viewing by appointment (46325 Borken) - Shipping by freight forwarder possible – costs and arrangements upon request - Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) For further questions, please contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Feutron climate test chamber. Feutron climate test chamber Temperature - Temperature range: -40...90°C - Climate range (without heat load): 10...85°C - Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min - Temporal temperature deviation during climate operation: ± 1.0...± 1.5 K/min - Rate of temperature change: - Heating: 2.0 K/min (average) - Cooling: 2.0 K/min (average) - Standard IEC 1646 is implementable including testing, solar modules up to a maximum weight of 160 kg, and non-linear ramps (setpoint jumps) Drying - Air drying: Condensation drying Humidity - Air humidification: Steam humidification - Humidity range: 10...95% RH - Temporal humidity deviation: ≤ ± 3.0...± 5.0% RH - Dew point range: 8...80.9°C Test Chamber - Test chamber volume: 7.0 m³ Dimensions - Test chamber internal dimensions (W x H x D): 1500 mm x 2250 mm x 2000 mm - Heated hinged door, DIN right, width: 900 mm x height: 2100 mm - Heated viewing window with blackout and lockable, width: 500 mm x height: 600 mm - Feedthrough openings: 2x on the right front side, Ø 75 mm - Irradiation unit inside test chamber - Cut-out: 4x in the left side wall for SC 2500, each 850 x 700 mm - Illuminated area with SC 2500: 1200 x 1200 mm - Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² - Lighting: 1x halogen lamp 200W Refrigeration System - Bitzer semi-hermetic 2-stage compressor, air-cooled - Condenser: split condenser (for outdoor installation, winter mode) - Refrigerant: R507 / R23 Temperature Control System - Cooling brine medium: Tyfocor / water - Mixing ratio: 50/50% - Brine density: 1.072 kg/dm³ - Fill quantity: approx. 80 dm³ Pyranometer - Temperature range: -40...150°C - Maximum radiation uptake: 4000 W/m² - Spectral range (50% points): 305...2800 nm - Sensitivity (nominal): 7 µV/W/m² Power Supply - Test Chamber - Electrical connection: 400V, 3/N/PE, AC, 50Hz Gtsdpfx Aeklv H Iod Aow - Connection type: Hardwired - Maximum simultaneous power demand: approx. 32.0 kW - Circuit protection: 3 x 63, Char C (A) Power Supply - SolarConstant - Electrical connection: 400V, 3/N/PE, AC, 50Hz - Connection type: — - Maximum simultaneous power demand: approx. 30.0 kW - Circuit protection: 3 x 63, Char C (A) External Dimensions (including machine room/control cabinet and SolarConstant 2500 cabinet): - Machine room / control cabinet: width 3440 mm x height 2580 mm x depth 2950 mm - Control cabinet: width 2200 mm x height 1830 mm x depth 1100 mm - Split condenser: width 900 mm x height 950 mm x depth 2000 mm Weight - Total test chamber weight: approx. 2700 kg - Condenser weight (empty): 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see photo) (Specifications and technical data are subject to change and error!) We are happy to answer any further questions you may have by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, ACS Angelantoni Type: ACS WZH10-4080-2 BT Angelantoni Walk-in Climate Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research tests and is equipped with advanced safety features specifically for battery and accumulator testing (e.g. lithium-ion). Key Feature: Safety Features for Battery Testing: The chamber is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled venting in case of malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (incl. lithium-ion) - Electronics & control units Gtodeyg I Eyepfx Ad Aow - Automotive components - Industrial & research testing - Endurance, aging and stress tests Technical Data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climate chamber, 2-door Test range: Temperature: –40 °C to +80 °C Humidity: 10 % to 95 % r.h. Electrical Data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full-load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration System: Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: Dimensions (external, approx.): Length: ~ 4.5 m Width: ~ 2.2 m Height: ~ 2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and errors excepted!) Further questions can be answered by phone.

Leto izdelave: 2019, stanje: dober (rabljeno), Weiss Model: WK 10/40-80 Modular Climate Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and accumulator testing (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment considerably increases safety during battery tests and supports use in development and test environments (subject to the customer’s safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The system is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: • Functional and endurance tests • Material and component testing • Pre-aging and climate simulation • Conditioning of samples • Testing of batteries and accumulators (e.g., lithium-ion) under defined environmental conditions (with appropriate customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and run automatically. The unit was in operation until recently and is fully functional. General: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Year of manufacture: 2019 Condition: used, fully functional CE marking: available Made in Germany Control system: S!MPAC® control Webpanel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% RH Humidity accuracy: ± 5% Dimensions: Gtodpfeygvw Rex Ad Aow External (W×D×H): approx. 3300 × 5000 × 2500 mm Internal (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Type plate & documentation Condition: used Scope of delivery: (see pictures) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) Gsdpfx Adovb Hano Ajtw If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Godpfjvb E Uqex Ad Ajtw Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Water-Cooled Climate Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for carrying out temperature and humidity tests on multiple test specimens simultaneously. Device Description The climate test chamber enables the functionality or material properties of a test specimen to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer to the test specimen. The air treatment system is located at the rear of the internal chamber. The equipment aggregates are located behind the unit in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is built into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test room can be flushed with fresh air via a blower. Technical Data: Temperature testing: Temperature range: –60 °C to +90 °C Temperature deviation: ±0.5 to 1 K over time Spatial temperature deviation: ±1 K at 200 mm wall clearance Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic testing: Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±2 – ±5 % RH over time Without radiant heat In stabilized condition The technical data refer to an ambient temperature of +25 °C, nominal voltage of 400 V, without test specimens, without radiation, and without additional equipment. Dimensions: Godex Anipopfx Ad Astw Internal dimensions (test room / usable space): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Width: 2,100 mm Depth: 2,530 mm Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm Depth: 5,200 mm Height: 2,520 mm (may vary based on doors, frame, accessories, etc.) Operating data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Inspection by appointment possible (46325 Borken) Shipping by freight carrier possible – costs & organization on request Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna dolžina: 2.000 mm, skupna širina: 500 mm, skupna višina: 1.950 mm, skupna masa: 300 kg, Brez minimalne cene – zagotovljena prodaja najboljšemu ponudniku! Oddaja ponudbe obvezuje k pravočasnemu prevzemu med 04.05.26 in 07.05.26. TEHNIČNI PODATKI Število omar: 2 Polic na omaro: 4 Dimenzije na omaro: 950 mm x 500 mm x 1.950 mm Gjdpfxjyr Itue Ad Aetw PODROBNOSTI O STROJU Mere in teža Dimenzije (D x Š x V): 2.000 x 500 x 1.950 mm Teža: 300 kg Zunanja referenca: Lot 17

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna dolžina: 700 mm, skupna širina: 280 mm, skupna višina: 1.950 mm, skupna masa: 300 kg, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe pomeni obveznost pravočasnega prevzema med 04.05.26 in 07.05.26. TEHNIČNI PODATKI Gtjdpfx Adoyr Ipve Aow Vsebina: Vijaki Matice Ostala delavniška oprema PODROBNOSTI O STROJU Mere in teža Mere (D x Š x V): 700 x 280 x 1.950 mm Teža: 300 kg Zunanja referenca: Lot 15

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 152.41.80.203, potovalna razdalja osi X: 630 mm, pomik osi Y: 500 mm, pomik po osi Z: 460 mm, največja hitrost vrtenja: 3.150 obr/min, model krmilnika: HEIDENHAIN TNC 150, Aucune mise à prix - vente garantie au plus offrant ! La soumission d'une offre oblige à l'enlèvement dans les délais, entre le 04.05.26 et le 07.05.26. DÉTAILS TECHNIQUES Course axe X : 630 mm Course axe Y : 500 mm Gedpjyr H Ukefx Ad Aetw Course axe Z : 460 mm Course du fourreau vertical : 110 mm Plage de vitesse de rotation : 30 - 3.150 tr/min Vitesse d'avance parallèle aux axes : 2 - 2.000 mm/min Avance rapide axes X et Y : 6.000 mm/min Avance rapide axe Z : 4.000 mm/min Porte-outil : ISO 40 DÉTAILS DE LA MACHINE Commande : HEIDENHAIN TNC 150 Tension de service : 380 V Fréquence : 50 Hz Courant nominal : 30 A Raccordement : 14 kW Puissance d'entraînement : 6,0/8,0 kW Dimensions & poids Dimensions (L x l x h) : 2.700 x 2.300 x 2.300 mm Poids : 3.000 kg ÉQUIPEMENT Table de serrage (650 x 400 mm) Remarque : L'étau posé sur la table de serrage n'est pas compris dans la livraison. Référence externe : 43

Stanje: rabljeno, No. 3203 Milling Tools Leitz, Oppold Used Comprising: 2x Leitz milling cutters, 1 of which is unused 4x milling discs green 6x Oppold profile cutters - 2 x Leitz milling cutters, 1 unused Bore Ø 60 mm, Outer Ø 170 mm, Height 40 mm - 4 x green milling discs Bore Ø 35 mm, Outer Ø 90 - 120 mm, Height approx. 25 mm - 6 x Oppold profile cutters Gtjdev Dutnopfx Ad Ajw Bore Ø 30 mm, Outer Ø 120 mm, Height 25 mm Sale on behalf of customer, ex location near 73430 Aalen Shipping by us optional Subject to errors in description and price To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale is carried out in as-is condition Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. With used machines, any warranty is excluded, sale is “as seen”. Pictures and videos are for illustration purposes and do not represent the actual scope of delivery. Terms of payment: prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of construction 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but a premium safety test chamber specifically engineered for aging, performance, and safety testing of lithium-ion energy storage systems. Key Benefits: The unit is designed to reliably detect, monitor, and safely contain critical battery events—suitable for tests up to EUCAR Hazard Level 5 (fire/flames, no explosion). Capabilities (Section 2 – Performance & Applications): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under specified temperatures) - Continuous temperature runs and thermal cycling tests - Testing of both unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the chamber - Safe execution of tests under realistic thermal conditions - Suitable test environment for R&D, automotive, e-mobility, and energy storage technology Ideal for: - Battery and cell manufacturers - Research & development laboratories - Test & safety labs - Automotive / e-mobility / energy storage sectors The P Plus package upgrades the KB 720 into a true battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & audible alarm - Mechanical double-door locking for secure containment - Interior spark protection - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g., nitrogen) - Emergency stop / manual fire suppression activation - Cable entry ports for charging and measurement cables Result: The unit is rated for testing lithium-ion cells up to EUCAR Hazard Level 5, where fires or flames can occur, but without the risk of explosion or uncontrolled propagation. It is not intended for abuse or destruction testing, but as a safe, standard-compliant test chamber for real-world operational and fault scenarios. Key Technical Data: - Temperature range: –10 °C to +100 °C - Interior volume: approx. 698 litres - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Mains connection: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse protection: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - Exterior (W × H × D): approx. 1250 × 1950 × 900 mm - Interior (W × H × D): approx. 970 × 1250 × 576 mm In summary – why this unit stands out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ fire suppression - Large chamber (≈700 l) - High market and resale appeal - Weight: approx. 285–300 kg Gtsdpfxex Hf A Rj Ad Aow Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data. All information subject to verification!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Binder Model: MKFT 720 E3.2 Temperature Cycling Chamber, Air-cooled Temperature range: -70°C to +180°C Humidity range: 10% r.h. to 98% r.h. The MKFT temperature cycling chamber is a specially designed environmental simulation cabinet for industrial material testing and environmental simulation. Its unparalleled performance far exceeds the capabilities of a conventional heating chamber. The MKFT fulfills all requirements for material tests as well as aging and stress tests. Technical Data: Unit dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Interior dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Interior volume: 734 liters Net weight (empty): 635 kg Maximum total load: 160 kg Maximum load per shelf: 40 kg Temperature performance: Temperature range: -70°C...180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.3...2.0 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.0 K/min Max. heat compensation: 5000 W Climate performance: Temperature range: +10...+95°C Humidity range: 10...98% r.h. Temporal temperature deviation depending on setpoint: 0.1...1.0 ± K Max. heat compensation: 800 W Electrical data: Rated voltage: 400V 3N~ ±10% 50Hz Rated power: 13 kW 22.2 A Refrigerant: R-404A / R-23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if needed 3. Leak test with certificate 4. After successful inspection, chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photo) Godpfx Adjyr Hi Uj Aetw (Subject to change and errors in technical data and information!) If you have any further questions, do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used, among others, in: • quality control (QC) • end-of-line production testing • OEM laboratory and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38 kg ⸻ Included equipment / scope of delivery • Main unit ATS 400 X8 with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test cables and accessories (see photos) • Manufacturer documentation • Original markings, nameplates, CE certified ⸻ Gtodpfxeyc H N Ns Ad Asw Technical notes • This is a professional test and measurement instrument, not consumer electronics • Ready for immediate use in a production environment • No signs of tampering, all connectors and interfaces complete

Stanje: zelo dobro (rabljeno), Electric Handheld Nibbler TruTool PN 200 Gtodpfxsuhm E Sj Ad Asw Product Features The new TruTool PN 200 nibbler is primarily used for cutting C, L, and U-shaped sections, trapezoidal sheet metal, and similar profiles. The device is equipped with a short tool for processing sheet metal with profile depths up to 85 mm, as well as C, L, and U profiles. It is also suitable for corrugated sheets. Ideal for hard-to-reach areas. The working direction can be adjusted by 360° easily and tool-free in 45-degree increments. Minimized retooling time: Punch and die can be changed quickly, without interruptions and without tools. Unmatched speed: Fast and efficient—2.1 meters per minute when processing structural steel with 400 N/mm² strength. Applications: Trapezoidal sheet metal For cutting profiles up to 86 mm depth and 132.5 / 40 mm width. Suitable for straight and angled cuts. Profiles For cutting C, L, and U-shaped profiles. Corrugated sheet For trimming and cutting. Suitable for angled cuts as well as internal and radiused cutouts. • MAXIMUM SHEET THICKNESSES: • MAXIMUM SHEET THICKNESS, STEEL 400 N/MM²: 2 mm • MAXIMUM SHEET THICKNESS, STEEL 600 N/MM²: 1.5 mm • MAXIMUM SHEET THICKNESS, STEEL 800 N/MM²: 1 mm • MAXIMUM SHEET THICKNESS, ALUMINUM UP TO 250 N/MM²: 3 mm • RADII: • MINIMUM RADIUS: 50 mm • GENERAL INFORMATION: • WORKING SPEED: 2.1 m/min • NUMBER OF STROKES AT NOMINAL LOAD: 1500 1/min • STARTING HOLE DIAMETER: 24 mm • NOMINAL POWER CONSUMPTION: 550 W

Stanje: dober (rabljeno), Die block die Matrizen, B x H ca. 3500 x 260 x 190 mm. Gesamtlänge: 3500 mm Länge der Reduzierstücke: 2600 mm V-Nut, ohne Reduzierstücke, Öffnungsweite ca. 100 mm V-Nut, mit Reduzierstücke, Öffnungsweite ca. 150 mm, H = 220 mm Gtodpfxsynhtto Ad Ajw

Leto izdelave: 2021, stanje: skoraj kot novo (rabljeno), (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) Gedpswurq Rofx Ad Ajtw ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. Gtedpfowurqkex Ad Aew All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: dober (rabljeno), Sicom B163-5 Dvoglavi stroj za kovičenje Proizvajalec: Sicom, Italija Zelo dobro ohranjen, pripravljen za proizvodnjo. Dvoglavi kovičnik za istočasno namestitev dveh kovicev na registratorje, vzorčne knjige in podobne izdelke. Debelina kartona: 0,5-4 mm Največja velikost plošče: 1000 x 900 mm Teža: 170 kg Godpfx Adsynfvxj Aetw Pnevmatski priključek: 6-8 bar Samodejno podajanje kovic, prebadanje materiala in stiskanje mehanizma.

Stanje: zelo dobro (rabljeno), RMS Elektrodinamična preizkuševalna naprava za vibracije Vzbujevalnik vibracij SW 3006+ Ojačevalnik moči TGA 1500 Tehnični podatki: Sinus: 3,7 kN Šum: 3,7 kN Sunek: 3,7 kN Premik pk-pk: 26 mm Hitrost: 0,9 m/s Pospešek: 80 g Gjdpfehyly Rex Ad Aotw Hlajenje: zračno hlajenje Stanje: rabljeno Nepreverjeno! Preizkusi niso bili možni Obseg dobave: (glej sliko) (Spremembe in napake v tehničnih podatkih pridržane!) Za dodatna vprašanja nas pokličite.

Leto izdelave: 2018, stanje: novo, številka stroja/vozila: DF0246 Rev0, Maximum tool dimensions: 2500 x 1800 mm Load capacity: 20 t Dimensions (L x W x H): 1920 x 2818 x 1140 mm Adjustable width: 1000 – 2000 mm Height adjustable via hydraulic pump: 700 – 1200 mm Weight: 2 t Motor power: 2.2 kW Gsdpfx Adodxvfmj Ajtw Threaded rod diameter: 70 mm Maximum tool dimensions: 2500 x 1800 mm

Stanje: rabljeno, Tersa skobeljne glave 160x240x50mm Z8 Godexu Rblopfx Ad Aotw 140x150x50mm Z4. 2 kosa

Stanje: dober (rabljeno), Omarica za orodje Hoffmann z dodatki Gtedoymk Haopfx Ad Asw

Stanje: zelo dobro (rabljeno), RMS Tip: SW 3509 + ojačevalnik TGD 6000-000.00 in ventilator RMS Elektrodinamična vibracijska preizkusna naprava Tehnični podatki: Sinus: 7,5 kN Šum: 6,7 kN Udar: 13 kN Hod pk-pk: 25,4 mm Hitrost: Sinus 1,5 m/s Šum 2,5 m/s Udar 2,5 m/s Pospešek: 100 g Hlajenje: zračno hlajenje Skupna teža ca. 4000 kg Gtsdpfx Ashylymod Asw Stanje: rabljeno Obseg dobave: (glej sliko) (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih!) Za dodatna vprašanja nas lahko pokličete.