Odsesovalna Naprava nakup rabljenega (6.963)

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je Corona predobdelovalna naprava AFS. Moč: 10 kW. Dokumentacija je na voljo. Ogled na lokaciji je možen. Bsdpfx Aoyn N A Aofnjwi

Stanje: rabljeno, Tool Presetting Device SOMET Type SPS 500 U Machine No. S1 Year of Manufacture: 1987 Table Surface: 545 x 1000 mm Travel: X = 500 mm, Y = 340 mm Portal Width: 550 mm Height (table to underside of portal): 250 mm Bjdpfxodzqrte Afnowi - Longitudinal portal guides right and left on the table - Adjustment via precision leadscrews with handwheel - Rapid adjustment via electric release - Projector screen Ø 150 mm with crosshair and coordinates MEOPTA PMP100 - 2 clamping devices for tool measurement included - Mounted on a base with shelf and drawer Required space (L x W x H): 1100 x 700 x 1650 mm Weight: 560 kg Good condition

Stanje: rabljeno, Extraction system, central extraction unit, ambient air filtration system ETS Efficient Technical Solutions GmbH Central welding fume extraction Year of manufacture: approx. 2005 Airflow volume: approx. 5000 m³/h Extraction inlet at filter: 1200 x 150 mm Exhaust outlet at filter: 400 x 300 mm Bodpeicic Hsfx Afnjwi Motor power: 10 kW Power supply: 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance hatch for filter replacement - Radial fan mounted on top of the unit Required space (L x W x H): 2000 x 1650 x 3650 mm Transport height without fan: 3100 mm Weight: approx. 2000 kg Very good condition

Stanje: rabljeno, Circular Trough Vibratory Finishing Machine WALTHER TROWAL Type CLS-980 SA Order No. 15.207 Year of manufacture: 1972 Trough diameter: 1850 mm Total trough external height: approx. 1150 mm Work tank / gross volume: max. 980 liters Usable volume: approx. 490 liters Maximum workpiece diameter: approx. 300 mm (measured diagonally) Screening area: 3400 cm² Speed: 1000 to 1700 rpm, stepless Motor power: 22 kW Power supply: 400 Volt, 50 Hz - Duty cycle manually and via timer - Stepless motor speed via DANFOSS drive controller type VLT 3032 (frequency inverter) - Manually adjustable eccentric imbalance weights - Tank lined with rubber - Sound-insulated cover with pneumatic lid opening - Manual separation flap - Integrated screen separating device after the separation flap - Liquid connection - Material discharge opening: 470 x 300 mm - Control cabinet and drive controller for wall mounting - Baffle plate cover with perforated screen - 1 box of pyramid-shaped grinding media Required space (L x W x H): 3000 x 3000 x 2550 mm Transport dimensions (L x W x H): 2300 x 3000 x 2550 mm Net weight: 2500 kg Good condition Function description: Workpieces and grinding media are set in motion by the generated vibration and are circulated extremely gently. The constant relative movement between the workpieces and the media causes deburring and surface finishing of the workpieces. Bwodpfxjdzqn Ds Afnsi

Stanje: rabljeno, TIG welding machine, electric welding unit KESTRA type TIG 350 AC/DC Arc welding machine Serial No.: Year of manufacture: approx. 1985 Power output: 350 amps = 60% duty cycle Adjustment range: 3 steps with fine adjustment Current type: AC / DC Bsdpfxsdzql So Afnowi Mains connection: 400 V, 50 Hz, 32 A plug - 4 meter hose package with TIG torch - 2-stroke / 4-stroke welding facility - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with direct current and good results when welding aluminum with alternating current. The HF ignition is non-functional; the arc can be initiated by briefly touching.

Stanje: rabljeno, Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg, Holland Model R96-20 Serial No. 9745 Year of manufacture: 1999 Load capacity: 2,000 kg Centering mandrel: Ø 90 mm Suction area outer diameter: 850 mm (plus seal) Suction area inner diameter: 250 mm (minus seal) Seal width: 50 mm Suction area: 0.5 m² Vacuum: min. -800 mbar Suction capacity: approx. 100 m³/h per vacuum pump Motor power: 2x 2.2 kW Power supply: 400 Volt, 50 Hz - 2 Rietschle vacuum compressors, type VCE 100 Dimensions Ø x H: 1,600 x 2,250 mm Height with centering mandrel: 2,500 mm Total height in transport frame: 2,950 mm Own weight: 2.5 tons. Bjdpfedzqc Iox Afnswi

Stanje: rabljeno, Flame Preheating Device Roland Groß + Söhne GmbH Ring Burner for Preheating, e.g. for Weld Seam Preheating, Casting Preheating, etc. Type: 1 x 1" Ionization Serial No.: ALMA Year of manufacture: 03/20 Connection voltage: 230 Volt Max. gas pressure: 500 mbar Max. air pressure: 10 bar Max. gas flow: 30 Nm³/h Max. air flow: 300 Nm³/h Including 10 different flame ring nozzles: - Flame monitoring Hans Henning - Foldable ring nozzle made of 2 half-shells, inner Ø 310 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 400 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 490 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 500 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 590 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 690 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 690 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 800 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 890 mm, with push-fit hose coupling and ignition device, front-side outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 890 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, inner Ø 990 mm, with push-fit hose coupling and ignition device, central outlet - Foldable ring nozzle made of 2 half-shells, arc length 1500 mm, with push-fit hose coupling and ignition device, central outlet Bwodpfx Afjdz Spwsnei Suitable for preheating pipes and vessels. For heating steel to welding temperature. Ideal for repair welding and fabrication of welded components made from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Gas-fired heating for thermal coating applications.

Stanje: rabljeno, Plasma cutting unit CLOOS type CPS 40/80 Year of manufacture: 1990 Output at 60% duty cycle: 80 A Output at 100% duty cycle: 40 A Adjustable range: 40 and 80 amps (2 steps) Maximum cutting capacity for steel: 25 mm Torch package length: 5.5 meters Power supply: 400 V with 32 A plug Bedpfsdzqccsx Afnowi - Hand torch CLOOS Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Stanje: rabljeno, Impulse Shielded Gas Welding Machine REHM Type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding machine with inverter welding power source Serial No. Year of manufacture: 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Adjustment range stepless Power supply 400 Volt, 50 Hz, 32 Amp plug - Separate 4-roller wire feeder with connecting hose package - Digital display for voltage and current Bsdpfx Ajwa Uwdefnowi - Pulse welding function with single and double pulse - 2-stroke and 4-stroke welding modes - 4 meter Binzel hose package with central connection - Water-cooled - Shielding gas pressure regulator - MIG/MAG pulsed arc welding - MSG double pulse welding - MIG/MAG welding Required space (L x W x H): 1150 x 510 x 1350 mm Weight: 200 kg Good condition

Stanje: rabljeno, Manual tube bender, pipe bending machine, mandrel bending machine Hand tube bender, manual wire bending machine, bending machine Bwodpfewhf Hfex Afnji Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 piece bending tool Ø 15 mm with 25 mm bending radius 1 piece bending tool Ø 10 mm with 16 mm bending radius 1 piece bending tool Ø 8 mm with 9 mm bending radius 1 piece bending tool Ø 6 mm with 8 mm bending radius 1 piece bending tool Ø 5 mm with 8 mm bending radius - Rotary plate with degree marking - Scope of delivery as shown - Wooden storage case Dimensions (L x W x H): 570 x 480 x 145 mm Weight: 43 kg Good condition

Stanje: rabljeno, WIG Welding Machine DALEX Type GL/W 201 TIG Welding Machine Machine No.: 201 Year of manufacture: approx. 1995 Output 200 amps at 35% duty cycle 160 amps at 60% duty cycle Bwodoi E Izvspfx Afnei 120 amps at 100% duty cycle Continuously variable adjustment range Current type: DC (direct current) Power supply: 400 Volt, 50 Hz, 5.9 kVA, 32 amp plug - 2-stroke and 4-stroke welding modes - TIG torch package 8 meters - HF ignition - Shielding gas pressure regulator - Electrode welding for stick electrodes - Fan cooling - Connection socket for foot pedal (without foot pedal) Required space (L x W x H): 850 mm x 450 mm x 700 mm Weight: 90 kg Welding test produces very good results when welding stainless steel with direct current. Otherwise in very good condition as well.

Stanje: rabljeno, Suspended Crane Runway DEMAG Crane System Type KBK 1 Year of manufacture: approx. 2000 Single-girder monorail system with single-girder crane bridge Light crane system made from KBK modular system profiles Load capacity: 125 kg Span: 5 meters Distance between longitudinal running rails: 4.1 meters Total length of longitudinal girder: 12 meters Cross traverse profile = KBK1 Longitudinal running rail profile = KBK1 Consisting of: 29 meters of KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 trolley for crane suspension Bwedpfxohrkrtj Afnsi 2 double trolleys for longitudinal running rails 10 screw clamps for crane suspension or ceiling mounting (without beam clamps) 6 end caps suitable for KBK1 running rails

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Bwjdpfxehbal Do Afnsi Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Stanje: rabljeno, Chiller Water Recooling Unit DALEX Type DRF 2 Machine No. 38913719 Year of Manufacture: 1989 Flow Rate: 0.35 m³/h Cooling Capacity: 1950 Watts Operating Pressure: 2 to 3 bar Refrigerant: R134a (unit converted from R12 to R134a) Operating Overpressure: 18 bar Pipe Connection Thread: 3/4” Tank Volume: 600 x 400 x 350 mm (approx. 80 liters) Bwsdog D H Ruopfx Afnsi Power Supply: 380 Volt, 50 Hz Required Space (L x W x H): 900 x 800 x 1020 mm Weight: 100 kg Good condition

Stanje: rabljeno, 2-axis extraction robot, inserter, servo robot, workpiece gripper, loading robot, extraction robot Extraction device, handling unit for presses, lathes, etc. GETECHA Type GL-20S Serial No. 13836 Year of manufacture: 10/2003 Travel path Z-axis: 1900 mm Travel path Y-axis: 250 mm Travel speed Z-axis: max. 1100 mm/sec Travel speed Y-axis: max. 227 mm/sec Infinitely variable travel speed on Y and Z axes via SMB servomotors - Precise axis movement via linear guides - episod control system - Separate control panel Bedpfx Ajharwyjfnswi - Control interface for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic operation - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25,998 h The machine was used as a loader/unloader on a press. Required space (L x W x H): 2900 x 1800 x 2000 mm Weight: approx. 800 kg Good condition

Stanje: rabljeno, Electronic Crane Scale MWT Type 142 Serial No.: 142571 Year of manufacture: 1993 Tensile force measuring device, crane scale Measuring range: 2,500 to 80,000 kg Minimum measurable value: 20 kg Power supply via 12 Volt battery Bsdpfog D H Rijx Afnowi - Suspension shackle for double hook, anchor hook - Operation, saving of measurement values, and tare via remote control - Storage for measurement values (weights) - Printer for measurement values Very robust and high-quality steel body Net weight: approx. 200 kg

Stanje: rabljeno, Suspended Crane Runway System made of aluminum system profiles, similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA. Not DEMAG, but comparable to KBK. Double-rail suspended crane runway with single-girder bridge crane. Light crane system constructed from aluminum system profiles. Lifting capacity: 125 kg Span width: 3.2 meters as a single-girder bridge Profile height: 155 mm Profile width: 100 mm - Profiles: natural anodized aluminum - Trolleys with smooth-running plastic rollers - Power supply via festoon cable on wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profiles for the longitudinal rails, each with 3 suspension lugs 1 piece of 3.35 meter aluminum system profile for the cross beam (single-girder bridge) with 2 suspension lugs 1 trolley for crane suspension on the cross beam 2 trolleys on the longitudinal rails 6 end caps matching the profile rails Bodpfjuch Rfox Afnjwi Weight of profile rails: 125 kg Very good condition, like new You will find hoists in our online shop under the search term "chain hoist". Matching installation accessories can be found in our online shop under the search term "KBK".

Stanje: rabljeno, Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine No. 244311 Year of manufacture approx. 1992 Output: 50 Amp = 35% duty cycle 30 Amp = 100% duty cycle Adjustment Range: 2 steps Torch hose package length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Space requirement (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition Bwjdpfx Afsdzqa Henoi

Stanje: rabljeno, Handling device, JÄGER HANDLING handling system Manipulator for screwdriving technology Bjdpfxefx Hxzs Afnjwi Model: Handy-flex 200 Horizontal movement: 300 mm Vertical movement: 370 mm Load capacity: 10 to 14 kg Reach: 250 to 550 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: Ø 26 mm oval with screw clamp - Moveable in three axes (horizontal, vertical, rotatable) - 1 piece TECHNA balancer for vertical movement, Type 9340, adjustment range 10 to 14 kg - Adjustable detent pawl for vertical movement, manual release via Bowden cable - For suspension of small devices in a weightless state - Adjustable load capacity - Constant traction force Required space (L x W x H): 880 x 500 x 1120 mm Net weight: 23 kg Good condition

Stanje: rabljeno, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal travel: 450 mm Bwsdpefgpfmjfx Afnji Vertical travel: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable along three axes (horizontal, vertical, rotatable) - Rotary encoder KÜBLER for rotational movement, type 8.5873.5320.B311.S003 - Linear position sensor BALLUFF for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 balancing units for vertical movement, CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Load capacity adjustable in increments - Constant tensile force Required space (L x W x H): 770 x 310 x 1200 mm Net weight: 19 kg Good condition

Stanje: rabljeno, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurements ELABO type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations pursuant to EN60204, Part 1. Serial No.: 0064016 Year of construction: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V delivers a highly stable DC voltage with low ripple. One output terminal provides high voltage, the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of construction: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Bjdpfef Axn Ajx Afnswi Rated current: 1 A Interference suppression to VDE 0871 Rated power: 14 W Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO type 90-9B.3ZM92510 Serial No.: 0097588 Year of construction: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile rack - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many more ELABO devices available under stock numbers 57819, 57820, and 57821

Stanje: rabljeno, High-current EMC filter SCHAFFNER Type FS 20364-1200-99 3-phase, 3 x AC pre-charger, mains connection module, mains filter Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz Rated current: 3 x 1200 A Dimensions (W x H x D): 135 x 260 x 235 mm Weight: 27.5 kg Very good condition, from warehouse clearance, unused Bodpfxed D Dh Ae Afnjwi 2 units available, price per unit

Stanje: rabljeno, TIG welding machine, electric welding unit DALEX type TGKW 55 (AC-DC) Serial No. 532521 Year of manufacture: approx. 1975 Output: 225 amps = 60% duty cycle 125 amps = 100% duty cycle Adjustment range: 2.8 to 225 amps Bsdpfx Afjdzqaconswi Current type: Direct and alternating current (AC-DC) Power supply: 380 V, 50 Hz - Power setting via 5 coarse steps and stepless fine setting via rotary potentiometer - 2-stroke and 4-stroke welding modes - Remote control with rotary potentiometer for fine adjustment - Digital amperage display - TIG torch package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg Good condition

Stanje: rabljeno, Straightening machine, strip straightening device with adjustable geared motor LENZE This straightening machine/strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a conventional straightening machine Type: 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, infinitely adjustable Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Bwededzp U Ajpfx Afnsi Power supply: 380 Volt, 50 Hz - Pair of pull rollers, drive of the lower rubber-coated roller via open gear drive - Speed infinitely adjustable via handwheel on the geared motor - Upper section of straightening rollers is mechanically adjustable - Straightening unit with 3 rollers, one roller is missing (rollers in the straightening unit are not driven) - Mounted on a stable metal frame - The straightening machine was used for cardboard approx. 350 x 1.5 mm Required space (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg Good condition

Stanje: rabljeno, Back grinding device with permanent magnetic chuck JUNG type HA 20 Device No.: 3344 Profile depth: max. 15 mm Angle adjustment: 0° to 2° Magnetic chuck: 115 x 115 mm Bedpfxjdz Sqxj Afnewi Clamping range: 110 x 75 mm Construction height of magnetic plate: 119 mm Workpiece dimensions (L x W x H): max. 60 x 100 x 50 mm Power consumption: 1 ampere Operating voltage: 24 volts, DC (V/DC) - Mechanically switchable permanent magnet Dimensions (L x W x H): 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable for use in cutting tool and die making for tapered, back-ground cutting plates or mold inserts.