Odpadki-Press nakup rabljenega (28.150)

Stanje: rabljeno, Description: General: Table dimensions: 1,500 x 1,000 mm Max. clamping force: 500 kN Max. load capacity of upper plate: 2,500 kg Iaodpfxjwx T Ufj Af Tel Max. load capacity under plate: 7,000 kg RG version: plate extendable and tiltable Repeat accuracy: +/- 0.04 mm

Stanje: novo, Working length: 2750 mm Working height: 2500 mm Table lift: 300-1000 mm RUCHSER Glazing and Sealing Table RU-SW3-90° ----- Vertical working table with lifting device and rotating unit. Particularly suitable for glazing and double-sided sealing of wooden windows. Features: - Workpiece support section covered with felt - Infinitely adjustable pneumatic lifting device, lift from 300 mm to 1000 mm (relative to roller conveyor height) - Rotating unit for double-sided sealing, with roller conveyor, roller length 150 mm - 2 pneumatic clamps for securing the window to the rotating unit - Version with special rotating unit allows pass-through of windows placed on the roller conveyor with the rotating unit engaged (closed) Alternative/optional features available on request! Item 1.0: Art. no.: 100000 RU-SW3-90° Vertical Working Table for Wooden Windows with Rotating Unit for Glazing and Double-Sided Sealing Angle length: 1970 mm, Opening angle: 90°, Max. working width: 2750 mm, Total length: 3050 mm, Total width: 780 mm, Support height: 1600 mm, Support surface covered with felt. On the left OR right: one roller as edge protection for elements up to 2500 mm in height. Pneumatic lifting device from 300 - 1000 mm. Set-up area as roller conveyor with steel rollers, roller length and spacing: 200 mm each. ----- Total price for this configuration: on request! ----- Options at extra cost: Item 1.1: Art. no.: 5202 EUR 744.00/each Support section with rubber-coated rollers, Ø 48 mm, roller spacing 50 mm, for RU-SW3-90° and RU-SWS3 Item 1.2: Art. no.: 7081 EUR 424.00/each Steel angle covered with felt, mounted above the roller tracks, for RU-SW3-90°. These prevent the window from “rattling” during pushing. Additional strips are mounted above all roller tracks of the RU-S2. Item 1.3: Art. no.: 5056 EUR 129.00/each RU-AK-6 Storage Box 1000x120 mm, 6 compartments, for hanging in the roller conveyor ----- Ijdpfx Afexmk D Ro Tsal Total price for this configuration: on request! Ex works, plus packaging and shipping, plus statutory VAT. PDF brochure attached. (Technical data according to manufacturer – no liability accepted!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Iasdsu Dxb Tepfx Af Tel Optional with Decoiler and Straightener.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Splošni podatki Teža stroja: 1800 kg Višina stroja: 2200 mm Dimenzije Dolžina stroja: 1440 mm Glavni pogon Število osi: 3 Pritiskalna sila: 220 kN Ta 3-osni upogibni stroj Coastone Cone C9 je bil izdelan leta 2023. Odlikuje ga C-okvir konstrukcija, pritiskalna sila 220 kN in največja dolžina upogiba 900 mm. Opremljen je z Omron Touchscreen TC15-2D CNC krmiljem in Amada Promecam vpenjalnim sistemom za orodje, kar zagotavlja natančnost in enostavno uporabo. Stroj se nahaja v Sloveniji, vključuje komplet orodji za upogibanje in 36-mesečno garancijo. Izkoristite priložnost za nakup tega Coastone Cone C9. Za več informacij nas kontaktirajte. Iaedpfx Ajx I S Rwof Tol Vrste uporabe Upogibanje

Stanje: novo, Electric Press Brake MVD Model S40. Bending length: 1250 mm. Pressing force: 40 tons CNC Control: ESA S630 Number of controlled axes: 4 (Y1-Y2-X-R) Maximum Y-axis stroke: 310 mm Internal clearance: 500 mm Backgauge stroke: 750 mm Main motor power: 2 x 4.3 kW UNIMEC backgauge (Made in Italy) GIVI MISURE optical rulers (Made in Italy) Iajdpferp E A Tox Af Tel Quick-release clamps, PROMECAM type Faster Shorter bending cycles Excellent bending results Lower maintenance and production costs Silent Reduced energy consumption

Stanje: rabljeno, Vertikalni izhod za tiskarski stroj Heidelberg VSA-66/M.D Leto izdelave: 2000 - Serijska št.: 702101/00-292080 Maks. delovna širina: 660 mm Označevalna naprava Spletni video ogled preko WhatsApp - MS Zoom - Telegram Na zalogi v Emskirchen/Nürnberg - Na voljo takoj - Možen preizkus Iasdpfxex U Ezps Af Tel

Stanje: rabljeno, Leto izdelave: 2022, model krmilnika: Esa S 630, Opis: Tehnički podaci Godina proizvodnje: 2022 Iajdoxgpryspfx Af Tel Pritisna snaga: 125 t Dužina savijanja: 3050 mm Broj osa: 3 (Y1-Y2-X) Ukupna snaga: 11 kW Zapremina ulja: 200 l Dimenzije: 3660x1340x2500 mm Težina: cca 700 kg Električni sistem: 380 V – 660 V, 50 – 60 Hz, 3 faze (IE3) Upravljanje & upotreba CNC upravljačka jedinica: Esa S 630 CNC, 10" 2D grafički ekran, ekran osetljiv na dodir Upravljački panel: Okretna viseća ruka Bezbednosni PLC: Mcs PLC bezbednosni PLC Bezbednosna oprema Laserski bezbednosni sistem: DSP-AP bezbednosna barijera (ručno podešavanje visine) Zadnji graničnik X osa: domet 500 mm Granični prsti za zadnji graničnik: Standard Stezna glava i gornji alat Stezanje gornjeg alata: Ručno Alati: Uključeni u isporuku Donja matrica i nosač matrice Nosač matrice: Mehanički, evropskog tipa, standardna širina (Promecam) Donja matrica: Eurostamp 2067 / Standard Ostalo Bomberovanje: CNC-motorizovano bomberovanje (V osa) Prednji nosači: 2 nosača, manuelno podesivi po visini i širini.

Stanje: rabljeno, Leto izdelave: 2024, Exhibition machine Garbsen, new, complete in standard version, featuring: Iajdpfxex Twc Ao Af Tjl - Sturdy, torsion-resistant frame made of steel, using welded and bolted construction - Upper lamellar pressing beam with 6 elements, side lamellar pressing beam with 5 elements - Lamellar pressing beams with proven tolerance compensation (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are made of 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm at the lower vertical pressing beam - Electromotive adjustment of both pressing beams via precision trapezoidal threaded spindles (with increased pitch and radial accuracy) and high-performance travel nuts with grease reservoir - Pressing is performed electromotively, via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressing beams is infinitely adjustable electronically via 2 potentiometers and regulated by frequency converters, making the press force control completely wear-free - Pressing force for horizontal pressing beam: min. 500 daN (kg) to infinitely max. 2200 daN (kg) - Pressing force for vertical pressing beam: min. 300 daN (kg) to infinitely max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Very simple operation via 6 separate push buttons, 8 motion sequences selectable through the control system - Freely adjustable preselection for pressing time with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500 x 1200 x 2300 mm (L x W x H) Picture including special accessory: machine feet Surcharge for rapid traverse speed per unit for fast positioning of the pressing beams, controlled by automatic workpiece recognition with sensors in the pressing beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing of special parts Set of machine feet for working height 500 mm per unit Location: Garbsen

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Nazivna sila deformacije kN 630 Hod mm 10 - 105 Višina zaprtja mm 335 Globina grla mm 315 Prehod mm 355 Nastavitev drsnika mm 70 Število hodov drsnika/min 65/130 Površina drsnika mm 450 x 280 Površina mize mm 800 x 630 Ijdjx Sqtlopfx Af Teal Tlak MPa 0,5 Moč glavnega motorja kW 5,0/7,5 Skupna vstopna moč kVA 10,4 Dimenzije stroja mm 1425 x 1790 x 2550 Teža stroja kg 5850

Stanje: dober (rabljeno), Leto izdelave: 1990, V dobrem tehničnem stanju, popolnoma delujoč. Leto izdelave: 1990. Nazivna moč stiskalnice: 63 ton. Iedpfjx Sqtfex Af Tjal Dimenzije delovne površine mize: 800 x 630 mm. Teža stroja: cca 6 ton.

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. Iajdpofh R N Dsfx Af Tol - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: rabljeno, Dvobarvni ofsetni tiskarski stroj Heidelberg GTOZP-52+ N+P Leto izdelave 1992 - Serijska št. 707612N Največja velikost 360 x 520 mm 53 milijonov odtisov Vlažilni sistem Alcolor z Baldwin Plus različica – enota za številčenje in perforiranje Iaedpfxox U Aw Ij Af Tol Obrat 2/0 (perfekcija) Vključena navodila Spletni video ogled preko WhatsApp, MS Zoom, Telegram Na zalogi v Emskirchen/Nürnberg – Takoj na voljo – Možnost preizkusa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.700 mm, skupna dolžina: 3.900 mm, skupna širina: 900 mm, Stroj prodajamo zaradi novega nakupa. Ogled je možen po predhodnem dogovoru. Iaodpfx Aoxqqpbef Tsl

Stanje: rabljeno, Leto izdelave: 2009, Briquetirna stiskalnica s posodo, motor 7,5 kW. Premer briketa: 50 mm. Zmogljivost: 80–100 kg/h. Teža: cca 870 kg. Količina olja: 100 l. Z oljnim grelcem, mešalom in polžnim transportom. S senzorjem nivoja in samodejnim vklopom. Velikost posode: 1500 x 1500 x 900 mm. Skupne dimenzije: 2300 x 1800 x 1200 mm. Obratovalne ure: 3370 h. Lokacija skladišča: Nattheim. Iaedpfex Twb Sex Af Tol

Stanje: rabljeno, Leto izdelave: 1982, Presskraft 200 t Ständerweite 1650 mm Hub 600 mm Abstand Tisch/Stößel, großer Hub oben, Verstellung oben 1200 mm Tischfläche 1600 x 1250 mm Ziehkissenkraft 80 t Ziehkissenhub 300 mm Ziehkissenfläche 1300 x 900 mm Tischhöhe über Flur 800 mm Iajdpfx Afexwdrvs Tsl Stößelfläche 1600 x 1250 mm Ölvolumen 2000 l Antriebsleistung 43,0 kW Gewicht 25,0 t Platzbedarf (B x T x H) 2,9 x 2,3 x 5,8 m Tiefe unter Flur 0,85 m Für Handbeschickung gemäß den deutschen Unfallverhütungsvorschriften (UVV) zugelassen. Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, hydraulischem Ziehkissen im Tisch, Auswerfer im Stößel, hydraulischer Schnittschlagdämpfung mit motorisch verstellbarem Tiefenanschlag, Stößelverriegelung, Zweihandsteuerung. Die Maschine wird verkauft wie besehen und liegend, ohne Inbetriebnahme.

Stanje: novo, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH, 20 TON CAPACITY Max Capacity: 20 tons Rapid Approach Speed: 1,700 mm/min Working Speed (slow): 440 mm/min Cylinder Stroke: 300 mm Cylinder Rod Diameter: 45 mm Rod End Thread: M14 Tank Capacity: 30 liters Maximum Pressure: 350 bar Voltage: 400 V Frequency: 50–60 Hz Motor Power: 1.5 kW Maximum Absorbed Current: 3.8 A Weight: 200 kg Iaedjrvz A Sjpfx Af Tsl

Stanje: rabljeno, Leto izdelave: 1999, Pressure: 400 t Stroke: 800 mm Iaedpfx Aov Sva Sef Tol Upright distance: 2820 mm Lateral passage between uprights: 950 x 1100 mm Distance table/ram (stroke up): 1600 mm Table surface: 2800 x 1200 mm Cushion force in table: 150 t Cushion stroke in table: 200 mm Cushion area in table: 2000 x 800 mm Table height above floor: 650 mm Ram area: 2800 x 1200 mm Speed down: 420 mm/s Speed up: 300 mm/s Working speed: 17.5 - 29.5 mm/s Oil capacity: 2500 l Drive power: 75.0 + 22.0 kW Weight: 50.0 t Space requirement (WxDxH): 4.1 x 2.8 x 7.2 m Height above floor: 6.15 m Approved for manual loading operations according to CE standard with oil-hydraulic drive, pressure/time and stroke dependent controllable, hydraulic cushion in table, hydraulic ram locking, two-hand and four-hand operation

Stanje: novo, SERRMAC ETD 22 - PGM Column Drill Features: - Swiveling table + vise - Precise, quiet, and reliable - Direct drive transmission via INVERTER, no pulley changes - Precision spindle axis with hardened Morse taper - Power supply: 380V 3-phase - Ground-finished column Standard configurations: • Digital display indicating spindle speed • Tapping function with adjustable working depth • 24V LED lighting system • Electronic membrane control panel • Spindle rotation reversal button Isdegyggzepfx Af Tjal Technical Data: - Drilling capacity in steel: Ø 22 mm - Tapping: M16 - Spindle taper: MT2 - Column diameter: 98 mm - Spindle stroke: 120 mm - Transmission: Direct with inverter - Speed settings: Variable - Spindle speed range: 265–4200 rpm - Motor: 1.8–2.5 kW / 380V 3-phase - Power supply: 380V 3-phase - Weight: 240 kg (column)

Stanje: rabljeno, Leto izdelave: 1997, Druck 500 t Iasdpfx Aovuk T Eof Tol Ständerweite 1550 mm Hub 600 mm Entfernung Tisch/Stößel, gr. Hub oben, Verst. oben 900 mm Tischfläche 1200 x 1300 mm Ziehkissendruck im Tisch 250 t Ziehkissenhub im Tisch 150 mm Ziehkissenfläche 950 x 950 mm Tischhöhe über Flur 1245 mm seitlicher Ständerdurchgang 1250 mm Stößelfläche 1200 x 1300 mm Geschwindigkeit ab 750 mm/s Geschwindigkeit auf 780 mm/s Arbeitsgeschwindigkeit 105 mm/s Ölinhalt 4000 l Antriebsleistung 263,0 kW Gewicht 45,0 t Raumbedarf (BxTxH) 3,3 x 3,3 x 6,1 m Höhe über Flur 6,1 m Baujahr 1978 - Überholung 1997 Für Handeinlegearbeiten zugelassen gemäß den deutschen Unfallverhütungsvorschriften (UVV) mit ölhydraulischem Antrieb, hydraulischem Ziehkissen im Tisch, pneumatischem Auswerfer im Stößel (0,5 t), Schnittschlagdämpfung mit Stanzhubbegrenzung (motorisch verstellbar), mechanische Stößelverriegelung im OT wie steht und liegt, OHNE in Betrieb nehmen

Stanje: novo, Column drill, precise, quiet, and reliable. Manufactured according to strict safety standards. Iaedpfx Ajir Aihsf Tjl Precision spindle shaft with tempered Morse taper, machined base plate. Supplied with electronic speed variator. Rotating table + vice 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M 14. Spindle taper: MT2 Spindle stroke: 90 mm. Spindle quill diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU belt drive Electronic speed variator (E). Spindle speed: 270 ÷ 4,200 RPM. Motor power: 0.75 kW / 220 V Single Phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Stanje: novo, SERRMAC NEXT 25 PGM COLUMN DRILLING MACHINE – DUAL SPEED, THREE-PHASE – NEW “CE” – SWIVEL TABLE + VISE Drilling capacity in steel: Ø 25 mm Tapping capacity: M16 Spindle taper: MT3 Iajdpfxsuif Sys Af Tjl Column diameter: 98 mm Quill travel: 100 mm Transmission: pulleys (PU) Number of speeds: 12 Spindle speeds: 164 - 2460 rpm Motor power: 0.75 kW Power supply: 380 V – 3 phase Weight: 185 kg

Stanje: rabljeno, High-speed Manzoni 40 Ton Press, 150/300 strokes per minute Iaodpfxokn Hk To Af Tol Used – special offer

Stanje: rabljeno, Manzoni high-speed press 60 tons, strokes 110/308 Used - Bargain Iodpfx Afekn Hqge Toal

Stanje: delavnici obnovljeno (rabljeno), No.01 Pressa idraulica a 3 cilindri BIGNOZZI Forza: 200 tonnellate Completamente ricondizionata Piano: 1550 x 1050 mm Luce di gola: 1000 mm Corsa pistone: 500 mm Iaedpshnc R Isfx Af Tel Altezza piano di lavoro: 1180 mm Dimensioni: 2900 x 1700 x 2900 mm (altezza) Peso: 10 tonnellate

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, proizvajalec krmilnikov: ESA, model krmilnika: S 875W, upogibna sila (maks.): 220 t, delovna širina: 4.100 mm, hod: 310 mm, globina grla: 410 mm, razdalja med stojali: 3.600 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 200 mm/s, število osi: 8, tip kronanja: CNC krmiljen, kapaciteta rezervoarja za olje: 220 l, potovalna razdalja osi X: 750 mm, nastavitev zadnjega prislona: CNC krmiljen, zadnji prislon: 750 mm, število podpornih ročic: 2, Hibridna upogibna stiskalnica MVD 4100 X 220 ton Serija HC CNC ESA S 875W 21″ *dxf pripravljeno v 3D 8 osi (Y1-Y2-X-R-Z1-Z2-X5_konični_A1) Avtomatska kompenzacijska miza WILA Dsp Laser Stotinske optične letvice GIVI MISURE Ijdpsx N Rxcjfx Af Tjal Zadnji naslon UNIMEC Zgornji nosilec orodja tip Promecam Rolleri H = 150 mm Večžlebna matrica po celotni dolžini Pritisk: 220 ton Dolžina upogibanja: 4100 mm Prehod med stebri: 3600 mm Izrez: 410 mm Razdalja med mizo in batom „svetloba“: 515 mm Višina delovne mize: 965 mm Hod osi Y: 310 mm Hitrost pomika osi Y navzdol: 200 mm/s Delovna hitrost osi Y: 0 -10 mm/s Povratna hitrost osi Y: 200 mm/s Hod zadnjega naslona osi X: 750 mm Moč: 18,5 kW Dimenzije (D x Š x V): 5600 x 2200 x 3040 mm Približna teža: 13.700 kg