Načrt Schneider nakup rabljenega (177)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 50.000 l, Heating oil tank - storage container - diesel tank - tank system - steel tank Brand new - with 50,000 liter capacity - in accordance with EN 12285-2 - Class B (replacement for DIN 6616), above-ground, double-walled, incl. test certificate, suitable for installation in seismic zone 0 areas. The tank features two saddle supports, a manhole with dome cover and is equipped with the following fittings: 1 fill pipe with TW cap (filling cap) and dip tube, 1 measuring pipe with sounding rod and rod closure, 1 vent pipe with vent cap, 1 brand-new overfill prevention device with type approval (AIII), 1 ladder as well as 1 spare socket for extraction purposes, 1 optical leak detector with type approval and leak detection fluid. The tank is externally sandblasted, primed, and painted white / RAL 9016 shade (sample photo). Ffjdpfx Aoi A Hz Aobvew (Other RAL colors available upon request!) L = approx. 10.70 m - D = 2.50 m - Weight approx. 9.5 t - ex works, free loaded - General information: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Further tanks (new and used) as well as rental units also available! In addition, we buy existing tank systems and can, with certified specialist qualifications according to the Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and remove them.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 10.000 l, Diesel refueling station – On-site refueling station – Commercial refueling installation – consisting of: 1 x storage tank, 10,000 liters capacity, used 1 x fuel dispenser, model Eco 75, brand new Storage tank description: According to DIN 6616-D, above-ground, double-walled, including test certificate. The tank is supplied with two saddle feet, a manhole with dome cover, is used, internally emptied and professionally cleaned, equipped with the following fittings: - 1 fill pipe with TW cap (filler cap) and dip pipe - 1 gauge pipe with dipstick and dipstick closure - 1 vent pipe with ventilation hood - 1 brand new overfill prevention sensor with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection liquid The tank will be newly primer-coated and painted externally (RAL color tone). L = approx. 5.30 m - D = 1.60 m - Weight approx. 2.4 t - ex works, loaded free of charge Fuel dispenser description: Model Eco 75 – not suitable for calibration (non-legal-for-trade), Delivery rate up to approx. 75 l/min, suitable for diesel fuel, including: - Fuel management terminal with connection to myTecalemit Cloud - Incl. web-based tank data management software – Basic module - 2 ID systems for driver/vehicle, max. 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine-mesh strainer - 4 m hose DN 25 with type-approved automatic nozzle, including swivel joint and nozzle holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Memory for up to 10,000 fueling transactions - Menu guidance in German, English, and French Magnetic keys / transponders are additionally required. General: You will receive an invoice with VAT shown separately. Purchase subject to our General Terms and Conditions. Other tank systems (new and used) as well as rental systems are also available! Ffsdpfxsi An Ufs Abvew Additionally, we purchase existing tank systems and can, with certified specialist qualification according to the German Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and transport them away.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50-neu-löwa, kapaciteta rezervoarja: 50.000 l, 50m³ underground tank cistern, brand new according to DIN-EN 12285-1, Single-walled, raw interior, externally professionally insulated. Fsdpfx Aed Tmaqebvofw Dimensions: D = 2.50 m - L = approx. 10.70 m The tank is equipped with a DN 600 manhole including dome cover, bolts, and gasket. Upon request, the tank can be fully equipped with a fire-fighting water suction connection, bringing the tank in line with DIN 14230 requirements for underground fire-fighting water tanks. Fire-fighting water suction connection / suction pipe in stainless steel V2A – as per DIN 14230 – comprising: - 1 pc. DN125 suction pipe made of stainless steel V2A, with Storz A fixed coupling and Storz A blank coupling, - 1 pc. DN100 vent pipe with hood in stainless steel V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Fire Water Extraction Point", - 1 pc. dip tube with gauge rod for measuring fill level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are pre-assembled for installation – ex works – If required/desired: Installation of an above-ground fire water suction connection in accordance with DIN 14244 – Form B, Including A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made of cast iron – exterior coated with epoxy resin. Optional: Complete interior sandblasting and application of a potable/fire water coating. Tank ex works, loaded and ready for transport. General: You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and are able to properly empty, clean, dismantle, and transport them with certified specialist company qualification in accordance with the German Water Resources Act (§ 62 WHG).

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et50, kapaciteta rezervoarja: 50.000 l, Storage tank with 50,000-litre capacity for the storage of service water / fire-fighting water or for use as an irrigation tank, sports field irrigation, etc. Dimensions: Diameter = 2.50 m - Length = approx. 10.70 m The tank is pre-owned, internally emptied and professionally cleaned, and externally coated with a bitumen layer / bitumen insulation. Minor insulation damage from disassembly and transport may be present on the tank. Price ex Söhrewald – loaded, free of charge – For use as a fire water tank, we can equip the tank completely with a fire brigade suction connection: consisting of: - 1 pc. suction pipe DN125, stainless steel - V2A, with Storz A-fixed coupling and Storz A-blank coupling, - 1 pc. vent pipe DN100 with hood, stainless steel - V2A, - 1 pc. anti-vortex plate mounted on the suction pipe, - 1 pc. sign "Fire water extraction point", - 1 pc. dip tube with dipstick for fill level measurement, - 1 pc. tank access cover with screws and gasket. The suction pipe can be used both as a fill and extraction pipe. All components are supplied ready for installation – ex works – If requested/required: Installation of a fire water suction connection, above-ground, to DIN 14244 - form B, incl. A-fixed coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – with external epoxy coating. General information: Fjdpfxocydt Uj Abvjfw You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available! Furthermore, we purchase existing tank systems and, as a certified specialist company according to the Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and transport them away.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 20.000 l, Diesel fuel station – Home fuel station – Tank system – Small fuel station consisting of: 1 x 20,000 L storage tank – brand new 1 x eco 75 fuel dispenser – brand new Description of steel tank: 20,000 liter capacity, compliant with EN 12285-2 Class B (replacing DIN 6616), aboveground, double-walled, including test certificate. Approved for installation in seismic zone 0 areas. The tank features two saddle feet, a manhole with dome cover, and is equipped with the following fittings: - 1 fill pipe with TW closure (fill cap) and dip tube - 1 gauging pipe with dipstick and dipstick cap - 1 vent pipe with vent cap - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak fluid The tank is externally sand-blasted, primed, and painted in RAL 7011 iron grey. (Other RAL colours available for an additional charge.) Dimensions: L ≈ 6.90 m + 0.70 m (console) | D = 2.00 m | Weight ≈ 4.2 tonnes | Ex works, loaded free of charge Description of dispenser: type eco 75 – not suitable for calibration, Delivery rate up to approx. 75 l/min, suitable for diesel fuel, includes: - Automated fuel management terminal with myTecalemit-Cloud connectivity - Web-based tank data management software – basic module - 2 ID systems (driver/vehicle) for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230V - Oval gear meter with pulse output, accuracy ≈ +/- 0.5% - Angle seat filter / dirt filter with fine mesh - 4 m delivery hose DN 25 with type-approved automatic dispensing nozzle, incl. swivel joint and hose holder - Nominal suction height: approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing - Dimensions: approx. 1,410 x 520 x 275 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Tank data memory for up to 10,000 delivery records - Menu navigation in German, English, and French Ffjdoi Artljpfx Abvjw Magnetic keys / transponders are additionally required: General: The quoted price for the fuel station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at a competitive additional cost.) You will receive an invoice including VAT. Purchase is subject to our general terms and conditions. Other tank systems (new and used), as well as rental units, are also available! In addition, we purchase existing tank systems and can professionally empty, clean, dismantle, and remove them as per certified specialist qualifications according to the German Water Resources Act (§ 62 WHG).

Stanje: novo, Leto izdelave: 2026, Diesel tank - Heating oil tank - Tank system - Steel tank Factory new - with a capacity of 30,000 liters - compliant with EN 12285-2 - Class B (replacement for DIN 6616), above-ground, double-walled, incl. test certificate, suitable for installation in seismic zone 0 regions. The container is equipped with two saddle supports, a manhole with domed cover, and is fitted with the following accessories: 1 filling pipe with TW cap (filling cap) and dip pipe, 1 gauging pipe with dipstick and dipstick seal, 1 vent pipe with vent cap, 1 factory-new overfill prevention device with type approval (AIII), 1 ladder as well as 1 spare socket for withdrawal purposes, 1 optical leak detection device with type approval and leak detection fluid. The outer surface of the tank is sandblasted, primed, and painted in RAL7011 iron grey. (Other RAL colors available upon request.) L = approx. 10.00 m - D = 2.00 m - Weight approx. 5.9 t - ex works, loaded free of charge General Information: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units also available! Fjdei A Hw Rjpfx Abvsfw In addition, we purchase existing tank systems and, with certified specialist company qualification according to the Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and transport them away.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Heating Oil Tank – Storage Container – Diesel Tank 5,000 liters capacity – brand new – compliant with EN 12285-2 – Class B (replacement for DIN 6616), aboveground, double-walled, incl. inspection certificate, suitable for installation in seismic zone 0 areas. The tank is fitted with two saddle supports, a manhole with dome cover, and is equipped with the following fittings: - 1 fill pipe with TW cap (filling cap) and dip pipe - 1 gauge pipe with gauge rod and gauge rod closure - 1 vent pipe with vent cowl - 1 brand-new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection device with type approval and leak detection fluid The external surface of the tank is sandblasted, primed, and painted in RAL 1018 zinc yellow. (Other RAL colors available, e.g. RAL 7011 iron grey) L = approx. 2.80 m – D = 1.60 m – Weight approx. 1.5 t – ex works, loaded free of charge The tank is suitable for storing HVO (Hydrotreated Vegetable Oil). General: You will receive an invoice showing VAT. The purchase is governed by our general terms and conditions. We also offer additional tank systems (new and used) as well as rental units! Ffsdpfji Ar D Sox Abvsw Furthermore, we purchase existing storage tank systems and, with certified specialist qualification according to the German Water Resources Act (§ 62 WHG), can professionally drain, clean, dismantle, and transport them.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Liquid Fertiliser / AHL / ASL – Storage Tank Container Holding Tank Storage Vessel 100,000 litre capacity – brand new – above-ground, made from steel plate. The tank complies with DIN-EN 12285-2 (formerly DIN 6616-D), features 2 saddle supports, an access ladder, and is externally primed – supplied with untreated sheet metal. D = 2.90 m – L = approx. 16.00 m. The tank is fitted with a brand-new internal plastic lining, including a leak detection unit installed in a protective box – see sample photo. The plastic lining has a "General Building Authority Approval" and is therefore suitable and approved for the storage of liquid fertiliser AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex works – loaded free of charge. (Delivery can be offered at an economical additional cost.) Our recommendation: Sandblast the tank exterior, apply primer, and completely repaint – traffic grey / RAL colour. (Other RAL colours available upon request!) ASL (ammonium sulphate solution) is a highly sought-after liquid fertiliser, produced during the drying process of liquid fermentation residues and air scrubbing in drying plants. Due to the corrosive properties of the storage medium, ASL tanks require an internal plastic lining. Important: The tank shown (sample photo) is a refurbished 100,000 litre tank which has already been delivered to a customer. The plastic piping (PVC connection) is not included in the scope of delivery and can be purchased at additional cost. General Information: You will receive an invoice with VAT shown separately. The sale is subject to our general terms and conditions. Other tank systems (new and used), as well as rental units, are also available! In addition, we buy existing tank systems and can professionally empty, clean, dismantle, and remove them with certified specialist company qualification in accordance with the Water Resources Act (WHG). ===== For further enquiries, please contact: ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 Fodpfoi A Hxvjx Abvefw 34320 Söhrewald near Kassel / Hesse =====

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 100.000 l, Diesel Tank – Heating Oil Tank – Tank System – Steel Tank – Diesel Storage – Storage Vessel Brand New – 100m³ Capacity – Compliant with EN 12285-2 – Class B – (Replacement for DIN 6616), Above-ground, double-walled, including inspection certificate, Suitable for installation in seismic zone 0 areas. The tank is equipped with two saddle feet, a manhole with dome cover, and the following fittings: - 1 fill pipe with TW cap (filling cover) and dip pipe - 1 measuring pipe with level gauge and closure - 1 vent pipe with ventilation hood - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detector with type approval and leak detection fluid Fedpoi A Hx Ijfx Abvefw The tank’s exterior is sandblasted, primed, and painted in RAL7011 iron grey. (Other RAL colours available at surcharge.) L = approx. 15.80 m – D = 2.90 m – Weight approx. 19.0 t – Ex works, loaded free of charge – (For transport reasons, the dome cover and fittings are supplied loose and must be installed on site!) General: You will receive an invoice with VAT shown. Purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and, as a certified specialist company in accordance with the Water Resources Act (§62 WHG), can professionally empty, clean, dismantle, and remove them.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: eco-55, Fuel dispenser with data acquisition pump, eco-55 Type eco 55 – not suitable for calibration, Flow rate up to approx. 55 l/min, suitable for diesel fuel, incl. - Fuel management terminal connected to myTecalemit cloud - Incl. web-based fuel data management software – Basic module – - 2 identification systems for driver/vehicle for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse emitter, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine mesh - 4 m dispensing hose DN 19 with type-approved automatic nozzle, incl. swivel joint and hose holder - Nominal suction height up to approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated steel sheet housing Dimensions: approx. 1,410 x 520 x 275 mm - Graphic display, illuminated - Fuel data memory for up to 10,000 dispensing records - Menu navigation in German, English, and French Magnetic keys/transponders are required in addition. Alternatively, this dispenser is also available with a capacity of 75 l/min. The dispenser can be delivered for an additional charge. General: You will receive an invoice showing VAT. Ffedpfxjd Tc I Ds Abvew The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available! In addition, we also purchase existing tank systems and can professionally drain, clean, dismantle, and transport them with certified specialist company qualification according to the German Water Resources Act (§ 62 WHG).

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: et100-neu-löwa, 100,000 Litre Firewater Tank – Underground Storage Tank – Retention Tank According to DIN-EN 12285-1, Tank Class A, suitable for media up to 1.1 kg/dm³, single-walled, interior bare steel, exterior with professional insulation. Tank suitable for installation in walkable areas (not suitable for vehicular traffic). Dimensions: D = 2.90 m – L = approx. 15.80 m The tank is equipped with a DN 600 manway with dome cover, bolts, and gasket. Tank ex works, loaded free of charge Ffjdpfod Tc Nuox Abvsw On request, the tank can be fully equipped with a firewater suction connection, meeting the requirements of DIN 14230 – Underground Firewater Tanks: Firewater Suction Connection / Suction Line made of V2A stainless steel, according to DIN 14230, comprising: - 1 piece suction line DN125 made from V2A stainless steel, with Storz A-coupling and Storz A-blank cap - 1 piece vent pipe DN100 with stainless steel V2A hood - 1 piece anti-vortex plate mounted on suction line - 1 piece information sign "Firewater Extraction Point" - 1 piece dip pipe with measurement rod for level monitoring - 1 piece dome cover with bolts and gasket The suction line can be used as both filling and extraction pipe. All components are supplied ready for installation – ex works – If required/desired: Installation of an above-ground firewater suction connection, according to DIN 14244 – Form B, including A-coupling according to DIN 14319 and A-cover cap according to DIN 14319. Housing made of cast iron – exterior with epoxy resin coating Optional: Tank interior can be completely sandblasted and coated for service water/firewater application. The tank is suitable as a water tank, firewater tank, firewater retention tank, rainwater retention tank, retention tank, rainwater storage, retention cistern, cistern, etc. General: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. We also offer other (new and used) tank installations and rental units! Furthermore, we buy existing tank systems and can, with certified specialist qualifications according to the German Water Resources Act (§ 62 WHG), properly drain, clean, dismantle, and remove them.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Underground Tank, Firefighting Water Tank, Steel Storage Tank with a 30,000 Liter Capacity for the Storage of Process Water / Firefighting Water. Dimensions: Diameter = 2.00 m - Length = approx. 10.00 m The tank features a DN 600 manhole with domed cover, is used, internally emptied and professionally cleaned, and is externally coated with bitumen insulation/bitumen coating. The tank includes a permanently welded dome shaft made from steel sheet, including a walkable cover. Shaft dimensions: approx. 900 x 900 x 1,000 mm (width x depth x height) Minor insulation damage from removal and transport may be present on the tank. Price ex works Söhrewald – loaded, free of charge – For use as a firefighting water tank, we can fully equip the tank with a fire brigade suction connection, consisting of: - 1 pc. suction pipe DN125 made of stainless steel (V2A), with Storz A-fixed coupling and Storz A-blank cap, - 1 pc. DN100 vent pipe with hood, made of stainless steel (V2A), - 1 pc. anti-vortex plate mounted on the suction pipe, - 1 pc. sign "Firefighting Water Extraction Point", - 1 pc. dip tube with dipstick for measuring filling level, - 1 pc. dome cover with bolts and gasket. The suction pipe can be used as both a fill and extraction line. All components are supplied ready for installation – ex works – If required: Installation of a fire brigade suction connection, above ground, in accordance with DIN 14244 - Form B, including A-fixed coupling as per DIN 14319 and A-cover cap as per DIN 14319. Casing made of cast iron – externally coated with epoxy resin. Fodpfx Aboi Ary Sevjfw General: You will receive an invoice with shown VAT. The purchase is subject to our general terms and conditions. Further tank systems (new and used) as well as rental units are also available!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Schneider GVXI1000KH UPS sistem Fedpfx Abjyimpgevsfw Letnik 2018, zmogljivost UPS – 640 kVa, vključuje 205 baterij in 3 napajalne module, redno servisirano od novega pri Uninterruptable Power Supplies (Kohler).

Stanje: novo, Leto izdelave: 2025, Schneider Compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard equipped with all safety fittings, including power cable with plug and Condor pressure switch Compressed air tank equipped with safety valve, tank pressure gauge, and condensate drain valve Welded rear handle improves loading and transport capability Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch Fjdpfx Aobyhvrjbvjfw High-grade features for universal applications With V-belt drive, 2 inline cylinders for especially smooth operation, and 400 V three-phase motor with external motor protection Low compressor speed—protects compressor components, reduces noise level, and minimizes vibrations Large fan flywheel ensures optimal cooling Includes filter pressure regulator for controlled compressed air that is cleaned of condensate, dirt, and oil Supplied with 2 m device cord with rubber sheath and air outlet via quick coupling Device cord with phase inverter 10-year warranty on tank against rust-through Technical Data Pressure: 10 bar Intake capacity: 510 l/min Filling capacity: 390 l/min Speed: 1240 rpm Tank volume: 90 L Weight: 80 kg Noise level: 97 dB(A) Dimensions (WxDxH): 1070x495x895 mm Motor power: 3.0 kW Voltage: 400 V Location: Ex stock Bitburg Subject to prior sale

Stanje: potreben popravila (rabljeno), Leto izdelave: 2004, Schneider compressed air screw compressor - defective Fsdpfx Abevmivcsvefw The unit requires repair. The machine is being sold at a low price as it needs to be repaired. Motor power: 11 kW Free air delivery: 1,500 l/min Max. operating pressure: 10 bar Location: ex stock 54634 Bitburg The machine is sold as defective No warranty - no guarantee -

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, nazivna (navidezna) moč: 32 kVA, Ponujamo izbor popolnoma novih komponent Schneider Electric, vse v originalni tovarniški embalaži. Ta oprema je idealna za industrijske elektroinštalacije, razdelilne omare in sisteme distribucije električne energije. 🔹 Izklopniki (3P): Schneider MTZ2 25HF - 1 kos Schneider MTZ2 25HA - 4 kosi Schneider MTZ2 16HA - 10 kosov 🔹 Kompaktni odklopniki: Schneider NS630b – 1600 A Compact 16 kosov Schneider EF593816 – Sprednje priključne sponke napajanja – 16 kosov Fjdowrzl Sopfx Abvofw 🔹 Odklopniki v ulitem ohišju (MCCB): Schneider NW25H2 – 2500 A – 4P Stanje: Popolnoma novo Embalaža: Tovarniško zaprto Lokacija: Združeno kraljestvo Na voljo: Na zalogi, pripravljeno za odpreme Fotografije, tehnični listi in cene na zahtevo

Stanje: dober (rabljeno), Pomožni stikalo, linijsko stikalo, linijski odklopnik, ločilno stikalo z obremenitvijo, obremenitveni odklopnik, motorni zaščitni odklopnik, močnostni odklopnik, ločilnik, pomožno stikalo, glavno stikalo, vklopno-izklopno stikalo, prekucni (kamski) preklopnik Fsdpfxsx R Sxge Abvsfw -Proizvajalec: Schneider Electric, močnostni odklopnik, ločilno stikalo z obremenitvijo -Tip: NSX 400-630 F/N/H/NA -Vrtljiv pogon: z podaljškom -Transportne mere: 420/240/V200 mm -Teža: 7,7 kg

Leto izdelave: 2025, stanje: novo, Maße (Länge/Breite/Höhe) 750x705x1800 mm Gewicht 170 kg Gesamtleistungsbedarf 4 kW Kompressor UNM-STS-660-10-270 Ffodpfx Absv A Hv Sovow UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn. Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft. Großes Ventilatorschwungrad für optimale Kühlung. - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 U/min - Behältervolumen 270 l - Geräusch 78 dB(A) - Abmessungen L=750, B=705, H=1800 mm - Gewicht 170 kg

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H) 945x705x1800 mm Weight 206 kg Total power requirement 4 kW Fsdpfsv A Hwcsx Abvefw Compressor with refrigeration dryer UNM-STS-660-270-XDK UniMaster STS: The space-saving solution with upright tank! Comes standard with all fittings, such as solenoid valve or pressure switch with unloading valve for fully automatic operation, motor protection, safety valve, pressure gauge, non-return valve, condensate drain valve, and shut-off valve. Belt-driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures high efficiency. Intercooler and aftercooler ensure rapid cooling of the compressed air. Large fan flywheel for optimal cooling. With refrigeration dryer and bypass line. With complete module Öwadry, consisting of: refrigeration dryer, pre-filter, and oil-water separator (only in DKS version) Drip tray available as an option. - Pressure: 10 bar - Intake capacity: 660 l/min - Effective delivery: 520 l/min - Motor power: 4.0 kW - Speed: 1025 rpm - Tank volume: 270 l - Noise level: 78 dB(A) - Dimensions: L=945, W=705, H=1800 mm - Weight: 206 kg - incl. refrigeration dryer D

Leto izdelave: 2025, stanje: novo, Dimenzije (dužina/širina/visina) 1070x495x895 mm Težina 80 kg Ukupna potrebna snaga 3 kW Kompresor UNM-510-10-90-D Pokretni klipni kompresor sa horizontalnim rezervoarom. Standardno opremljen svim sigurnosnim uređajima i električnim priključnim kablom sa utikačem i Condor prekidačem pritiska. Rezervoar za komprimovani vazduh opremljen je sigurnosnim ventilom, manometrom pritiska u rezervoaru i ventilom za ispuštanje kondenzata. Zavarena zadnja ručka poboljšava mogućnost utovara i transporta. Potpuno automatski rad putem prekidača pritiska sa rasterećenjem starta, zaštitom motora i prekidačem za uključivanje/isključivanje. Ffodpfxov A Hv Ej Abvjw - Pritisak 10 bara - Usisna snaga 510 l/min - Efektivna snaga punjenja 390 l/min - Pogonska snaga 3,0 kW - Napon 400 V - Broj obrtaja 1240 min[-1] - Zapremina rezervoara 90 l - Težina 80 kg - Nivo buke 97 dB(A) - Dimenzije (ŠxDxV) 1070x495x895 mm - Težina (sa pakovanjem) 70,0 kg

Leto izdelave: 2025, stanje: novo, Maße (Länge/Breite/Höhe) 820x410x810 mm Gewicht 64 kg Gesamtleistungsbedarf 2,2 kW Kompressor UNM-410-10-50-W Fahrbarer Kolbenkompressor mit liegendem Behälter. Serienmäßig mit allen Sicherheitsarmaturen sowie elektrischem Anschlusskabel mit Stecker und Condor Druckschalter. Der Druckluftbehälter ist ausgestattet mit Sicherheitsventil, Behälterdruckmanometer und Kondensatablassventil. Der angeschweißte Heckgriff verbessert die Verlade- und Transportfähigkeit. Vollautomatischer Betrieb durch Druckschalter mit Anlaufentlastung, Motorschutz und Ein-/Ausschalter. - Druck: 10 bar - Ansaugleistung: 410 l/min - Füllleistung: 295 l/min - Antriebsleistung: 2,2 kW - Spannung: 230 V - Drehzahl: 1210 min⁻¹ - Behältervolumen: 50 l Fodpfxsv A Hvxe Abvofw - Gewicht: 64 kg - Geräusch: 96 dB(A) - Abmessungen (BxTxH): 820x410x810 mm - Gewicht (inkl. Verpackung): 85,5 kg

Stanje: novo, Leto izdelave: 2025, Maße (Länge/Breite/Höhe) 1950x690x1700 mm Gewicht 431 kg Gesamtleistungsbedarf 7,5 kW Schraubenkompressor mit Trockner AM-B-7-10-500 XBDK - Verdichtungsenddruck 10 bar Fodpfxjvz Ez Ds Abvofw - Arbeitsdruck 9,5 bar - Volumenstrom bei Arbeitsdruck (ISO 1217) 1,1 m³/min - Verdichterdrehzahl 4.523 min⁻¹ - Nennleistung Antriebsmotor (V/Hz) 7,5 kW (400V/50Hz) - Effizienz Motor 90,1% - Schutzart Antriebsmotor IP 55 - Erforderlicher Kühlluftbedarf (20°C Umgebungstemperatur) 1.260 m³/h - Umgebungstemperatur min. / max. +5°C / +40°C - Füllmenge Öl 3,1 l - Schalldruckpegel (LPA1 – DIN 45635 T13) 63 dB(A) - Anschluss Luftabgang 3/4“i - Behälterinhalt 500 l - Abmessungen (B x T x H) 1950 mm x 690 mm x 1700 mm - Gewicht 431 kg Technische Daten Kältetrockner DK 1200 SMART: - Volumenstrom bei Drucktaupunkt +3°C 1200 l/min - Druck 7 bar - Druckverlust 0,25 bar - Spannung 230V/50Hz - Max. Leistungsaufnahme 0,27 kW - Luftanschluss ¾“ a - Kältemittelfüllung R134A

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 1950 x 690 x 1700 mm Ffjdpfx Abevz Ekljvjw Weight: 426 kg Total power requirement: 5.5 kW Screw Compressor with Dryer AM-B-5-10-500 XBDK - Maximum final compression pressure: 10 bar - Operating pressure: 9.5 bar - Volume flow at operating pressure (ISO 1217): 0.7 m³/min - Compressor speed: 3,175 rpm - Rated power of drive motor (V/Hz): 5.5 kW (400V/50Hz) - Motor efficiency: 89.2% - Drive motor protection class: IP 55 - Required cooling air flow (at 20°C ambient temperature): 1,080 m³/h - Ambient temperature min. / max.: +5°C / +40°C - Oil fill quantity: 3.1 l - Sound pressure level (LPA1 DIN 45635 T13): 62 dB(A) - Air outlet connection: 3/4" internal - Tank capacity: 500 l - Dimensions (W x D x H): 1950 mm x 690 mm x 1700 mm - Weight: 426 kg Technical Data Refrigeration Dryer DK 1200 SMART: - Volume flow at pressure dew point +3°C: 1,200 l/min - Pressure: 7 bar - Pressure loss: 0.25 bar - Voltage: 230 V/50 Hz - Max. power consumption: 0.27 kW - Air connection: 3/4" external - Refrigerant charge: R134A

Stanje: rabljeno, pneumatic angle grinder, flex, angle sander, cut-off grinder, cut-off machine, angle grinding machine - for discs: Ø 50 mm - speed: max. 18,000 rpm - case including: accessories Ffjdpfjd R Ikaox Abvew - dimensions: 430/360/H90 mm - weight: 2.2 kg

Stanje: rabljeno, Auxiliary circuit breaker, circuit breaker, fuse, miniature circuit breaker, circuit protection device, control module, standard control unit, direct starter, reversing block, reversing unit, base device -LUCB12 BL: Control unit -LUB12: Base device -Price: per piece Fjdpfeff Sqasx Abvofw -Quantity: 27 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece