Mori Seiki Sl 25 nakup rabljenega (178)

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Fanuc, največja hitrost vretena: 10.000 obr/min, število vreten: 1, število mest v zalogovniku orodij: 30, Oprema: dokumentacija / priročnik, SV500 3-Axis Milling Machine > Tool holder: BT40 > Tool cooling: air and external water cooling > Clamping devices shown in photos are not included in the sale, can be provided upon request Knsdpfx Aewviqkeh Asf > Scope of delivery: machine + manual > Program upload via memory card possible > Preparation for extraction system available > Internal LED lighting > Color display > Inspection and test milling possible > Machine is used but in good condition and in daily operation

Stanje: rabljeno, Leto izdelave: 2006, X-travel: 600 mm Y-travel: 400 mm Z-travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Knjdpjv Az Ucsfx Ah Aof Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Number of magazine positions: 40 Max. tool width: 80 mm Max. tool diameter with free adjacent box: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 2.8 sec Tool change time (tool-to-tool): 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space requirements approx.: 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Ksdpfxowlvlgs Ah Aenf Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: rabljeno, Leto izdelave: 2000, potovalna razdalja osi X: 600 mm, pomik osi Y: 430 mm, pomik po osi Z: 460 mm, MORI SEIKI SV-400 S 4. IN 5. OSJO VERTIKALNI OBRATOVALNI CENTER PROIZVAJALEC: MORI SEIKI, IZDELANO NA JAPONSKEM MODEL: SV-400 LETO: 2000 KRMILJE: MORI FANUC MSC 501 VELIKOST MIZE: 900,0 x 500,0 mm Knsdjtvau Hspfx Ah Aef POMIKI (XYZ): X: 600,0 mm Y: 430,0 mm Z: 460,0 mm HITROST VRETENA: do 12.000 min⁻¹ VRETENSKI KONUS: BT 40 MENJALNIK ORODIJ (ATC): 30 POSTAJ HITRI POMIK (XYZ): 32.000 mm/min PODAJANJE: 1–16.000 mm/min DODATNO: - NIKKEN enota za 4. in 5. os - RENISHAW merilni sistem - DVOJNI transporter za ostružke - HLADILNI SISTEM

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, CNC Control: FANUC FS-31iA5 (MAPPS 4) Capabilities: Travel X-axis (mm): 685 Travel Y-axis (mm): 125 Travel Z-axis (mm): 1075 Turning length (mm): 1045 Max. turning diameter (mm): ø 600 Bar working capacity (mm): 65 TURNING-MILLING SPINDLE: Indexing specifications: YES B-axis indexing degree: 120º FULL INDEXING SPECIFICATION Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 18.5/11 Tool Magazine: Tool stations: 80 Tool holder: CAPTO C5 Max. tool length (mm): 250 Max. tool diameter (mm): 70/130 Max. tool weight (kg): 5 Lower Turret: Number of tool stations: 12 Driven tool power (kW): 5.5/3.7 Main Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 25/22 (100%/40% duty cycle) Spindle bore (mm): 73 Kjdpowwuaajfx Ah Asnf Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Sub Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 25/22 (100%/40% duty cycle) Spindle bore (mm): 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Equipment: Electronic handwheel Chip conveyor Swivel head Signal lamp High-pressure pump Mist separator Work area light CE compliance Foot switch (dual) for main and sub spindle Coolant gun Tool holders not included Precision NC rotary table, rapid traverse and feed 100 1/min incl. direct measuring system Oil skimmer Linear scales Gantry loader LG-10 AII RENISHAW MP700 Machine run times: Power-on hours: 76,510 Spindle No. 1: 11,521 Spindle No. 2: 9,271 Nominal power rating (kVA): 102 Base machine dimensions/weight: Length (mm): 8,000 Width (mm): 4,000 Height (mm): 3,000 Weight (kg): 15,000

Stanje: rabljeno, Leto izdelave: 2020, Technical Details: Turning diameter: 670 mm Turning length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Max. swing diameter over bed cover: 700 mm Travel paths turret no. 1 (milling spindle) x/y/z: 495 / ±150 / 1562(+164) mm B-axis rotation: -30° / +210° Rapid traverse turret 1 (milling head) x/y/z: 40/40/40 m/min Milling spindle speed: 12000 rpm Drive power – milling spindle: 20.2/18.8 kW Torque milling spindle: 120 / 44 Nm Tool interface milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool-to-tool, milling spindle: 1.25 s Spindle 1 speed: 3000 rpm Spindle 1 power: 36 / 30 / 25 kW C-axis spindle 1: 0.001° Bar capacity spindle 1: 102 mm Spindle 2 speed: 4000 rpm Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0.001° Bar capacity spindle 2: 80 mm Space requirement approx.: 7.8 x 3.6 x 2.9 m Linear glass scales on axes: X, Y Programmable steady rest: KLU-A530 & SLU-X3.2 Accessories: Chip conveyor Tool measurement Spindle load monitor Air blow system Air blow system through ICS system to the tool Spindle 1 power chuck Kitagawa 250 (B 210) mm Spindle 2 power chuck Kitagawa 250 (B 210) mm Interface for internal coolant supply 70 bar Tailstock specification for sub spindle Workpiece measurement with Renishaw OMP60 probe Detachable handwheel Workpiece and total counter Three-color signal lamp Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear viewing window Quick clamping cycles Program restart Four-color signal lamp Ethernet I/P interface Manual tool measuring arm Automatic door Oil mist separator Kedpfx Ahowl Ag De Ajnf Oil skimmer Spindle touch probe for workpiece measurement External air blow system sub spindle Spindle 1 coolant nozzle Spindle 2 coolant nozzle Coolant gun Internal coolant supply 70 bar with Knoll filtration A high-spec CNC turning and milling center with sub spindle, which can also be used with tailstock functionality. The machine has an automatic door and Matris Robot System type R-2000iC/165F.

Stanje: dober (rabljeno), Leto izdelave: 2006,

Stanje: rabljeno, Leto izdelave: 1999, x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm Control: MSC 502 Distance spindle center to table: 50 - 650 mm Distance spindle nose to table center: 100 - 610 mm Speed range - main spindle, max.: 12,000 rpm Drive power - main spindle: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Number of tool stations: 60 positions Tool holder: MAS BT-40 Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X / Y / Z): 32 m/min Feedrate: 1 - 24,000 mm/min Kodpfxotqmt To Ah Aonf Fine feedrate: 0 - 1,260 mm/min Total power requirement: 63 kVA Machine weight approx.: 9.0 t Space requirement approx.: 5.5 x 4.5 x 2.7 m CNC horizontal machining center MORI SEIKI - SH 400

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 850 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, nazivna (navidezna) moč: 22 kVA, proizvajalec krmilnikov: MORI SEIKI, model krmilnika: MSX-711 IV, obremenitev mize: 500 kg, število mest v zalogovniku orodij: 60, dolžina orodja: 500 mm, premer orodja: 140 mm, teža orodja: 12 g, Horizontal Machining Centre MORI SEIKI NH-5000 DCG/40 The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining centre, engineered to deliver exceptional precision, reliability, and continuous productivity, even during the most complex machining operations. Key features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Max spindle speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travel): X-axis: 730 mm Y-axis: 730 mm Z-axis: 850 mm Spindle centre – pallet surface distance: 100 – 830 mm Spindle nose – pallet centre distance: 100 – 950 mm Max workpiece size: Ø800 x 1,000 mm Rotary Table: Kjdpfx Ahjwxygze Ajnf Table size: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Maximum pallet load: 500 kg Continuous table rotation: 360,000 positions Feeds: Rapid traverse (X/Y/Z): 50,000 mm/min Cutting feed (X/Y/Z): 1 – 50,000 mm/min Tool Changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max tool diameter: Ø140 mm (with adjacent tools: Ø70 mm) Max tool length: 500 mm Max tool weight: 12 kg Equipment and Accessories: Chip conveyor Coolant collection tank with washing pumps + external tank with paper filter High-pressure coolant pump through spindle line Spindle head chiller and transformer Retractable tool presetting sensor Comprehensive technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production environments, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, assuring highly complex machining processes with outstanding speed and precision.

Stanje: rabljeno, Leto izdelave: 2012,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 836, • Control system: FANUC MSC-500 • Axis travels: • X-axis: 560 mm • Y-axis: 410 mm • Z-axis: 460 mm • Table dimensions: 900 × 450 mm • Maximum table load: 700 kg Knsdpfx Aev U Endeh Aef • Spindle taper: CAT 40 • Maximum spindle speed: 8,000 rpm • Spindle motor power: 7.5 kW • Number of tool positions in magazine: 20 • Rapid traverse rates: • X and Y axes: 20 m/min • Z-axis: 15 m/min • Total machine power requirement: 30 kW • Machine weight: approx. 5,000 kg • Machine dimensions (L × W × H): 2.48 × 2.25 × 2.8 m

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: NL 201KF3443, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, največja hitrost vrtenja: 5.000 obr/min, hitrost pomika os X: 30 m/min, hitrost podajanja os Z: 30 m/min, prehod palice: 73 mm, | Category | Feature | Details | |-----|-----|-----| | General | Year of manufacture | 2011 | | | CNC controller | MSX-850 III or M730BM (MAPPS) | | | Number of axes | 2 | | | Dimensions (L x W x H) | Approx. 2700 x 1920 x 2120 mm | | | Approximate weight | 5400 kg | | Main Spindle | Spindle nose | A2-6 | | | Motor power | 15 kW (20 HP continuous / 26 HP peak) | | | Spindle speed | 50 to 5000 rpm (up to 6000 rpm on some models) | | | Spindle bore / Bar capacity | 73 mm / Ø 65 mm | | Axis Travels | X axis | 260 mm | | | Z axis | 590 mm | | Turret | Number of positions | 12 stations (BMT) | | | Tailstock (if equipped) | Travel 564 mm, MT4 taper | | Machining Capacities | Max. turning diameter | 356 mm (over cross slide) / 366 mm (over bed) | | | Max. turning length | 510 mm | | | Swing over bed | 755 mm (over cross slide) / 924 mm (over bed) | Kodpexgui Rsfx Ah Aonf | Standard Equipment | Chip conveyor | Yes (optional on base) | | | Tool measurement | Renishaw probe (2 arms possible) | | | High-pressure pump | Yes | | | Lighting and signaling | 3-color lamp | | | Bar feeder interface | For bar loader | | | Coolant tank capacity | 235 L | | | Other | Gantry Loader part extractor, MAPPS conversational programming, USB/RS-232 interface | Japanese precision (repeatability < 0.005 mm), robust design for intensive machining, low maintenance.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1985, Deli po roki niso priloženi. Knsdjgw Shrjpfx Ah Aef Stroj ne vključuje 4. osi.

Stanje: rabljeno, Leto izdelave: 2011, Maximum turning diameter: 320 mm Maximum turning length: 810 mm Control: MSX-701 IV Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Distance between centers: 1,130 mm Maximum spindle speed: 5,000 rpm Main spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Maximum spindle speed: 5,000 rpm Sub-spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed - driven tools: 6,000 rpm Drive power - driven tools: 7.5 / 5.5 kW Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Kedpfxov E R E Ne Ah Aonf X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm Sub-spindle traverse B: 870 mm Rapid traverse (X/Y/Z) 1: 30 / 20 / 50 m/min Rapid traverse (X/Y/Z) 2: 30 / - / 50 m/min Feedrate: 0 - 5,000 mm/min Total power requirement: 94 kVA Machine weight approx.: 8.3 t Space requirement approx.: 10.0 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 2000 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control system MSX 501 Spindle speeds - infinitely variable 14,000 rpm Tool holder BT 40 Pallet changer with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Tool changer 60 positions Table size 500 x 500 mm Total power requirement 56 kW Machine weight approx. 11.8 t Space requirement approx. 5.8 x 3.6 x 3.0 m Kjdpfx Ahsunt Hds Asnf

Stanje: rabljeno, Leto izdelave: 2010,

Stanje: dober (rabljeno), Leto izdelave: 2002, 1 x Horizontal Machining Center Mori Seiki SH 403 Year of Manufacture: 2002 Control: Fanuc MGS 501 with chip conveyor High-pressure pump 50 bar Technical Data: Travel paths: X: 560 Y: 510 Z: 510 mm Rapid traverse X/Y/Z: 42,000 mm/min Max. spindle speed: 12,000 rpm Taper: ISO 40 Tool changer: 40 positions Pallet size: 400 x 400 mm Number of pallets: 2 Table indexing: 1° Additional photos to follow. The machine can be inspected under power while in operation. Kjdpswyw Tusfx Ah Aonf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NH501CA0185, potovalna razdalja osi X: 630 mm, pomik osi Y: 600 mm, pomik po osi Z: 670 mm, največja hitrost vretena: 14.000 obr/min, število mest v zalogovniku orodij: 60, TECHNICAL DETAILS Knodpfx Ahowtq Tbo Ajf X-axis travel: 630 mm Y-axis travel: 600 mm Z-axis travel: 670 mm Tool holder: BT 40 Spindle speeds: 14,000 rpm Tool changer: 60-station Pallet changer with rotary indexing table: 360x1° Max. workpiece weight: 500 kg Table size: 500 x 500 mm MACHINE DETAILS Total power requirement: 56 kW Rated apparent power: 66 kVA Machine weight: 9,700 kg

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 2 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Max. bar diameter: 52 mm - Max. machinable diameter: 350 mm - Max. diameter over bed: 923 mm Kjdpfxeuhb Tds Ah Asnf TURRET - Number of positions: 12 - Travel X/Z: 260/590 mm TAILSTOCK - Tailstock type: Numeric - Tailstock travel: 564 mm - Distance between centers: 694 mm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total connected load: 19 kVA WEIGHT AND DIMENSIONS - Footprint: 2460 x 2000 mm - Machine height: 2185 mm - Machine weight: 5300 kg ACCESSORIES - Control: MORI MSX-850 III (Mitsubishi) - Coolant tank - Chip conveyor - Spindle cooling - Tool measuring probe - Electric transformer

Stanje: rabljeno, Leto izdelave: 2007, x-axis travel: 560 mm y-axis travel: 560 mm z-axis travel: 630 mm Control: MSX 701 III MAPPS Ksdpfx Ajwbi Adoh Asnf Max. spindle speed: 14,000 rpm Main spindle drive power: 18.5 / 11 kW Max. torque: 120 Nm Tool holder: MAS BT 40 Distance from spindle center to table: 80 - 640 mm Distance from spindle nose to table center: 100 - 730 mm Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece weight: 400 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm Pallet change time: 6.0 sec B-axis: 0.001° Number of tool stations: 60 Tool holder: MAS BT 40 Max. tool diameter: 70 / (140) mm Max. tool length: 400 mm Max. tool weight: 8.0 kg Rapid traverse (X / Y / Z): 50 m/min Feed rate: 0 - 50,000 mm/min Feed rate in inching mode: 0 - 1,260 mm/min Total power requirement: 35 kVA Machine weight approx.: 9.8 t Space requirement approx.: 5.5 x 3.5 x 2.8 m CNC Horizontal Machining Centre MORI SEIKI - NH 4000 DCG - Pallet changer - Control options: Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 12.280 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL201FH1430, stružna dolžina: 510 mm, premer struženja: 356 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, TEHNIČNI PODATKI Premer struženja: 356 mm Dolžina struženja: 510 mm Premer izhoda: 755 mm Standardni premer struženja: 275 mm Premer palice: 65 mm Pomik X-osi: 260 mm Pomik Z-osi: 590 mm Pogonska moč vretena: 15 kW Hitrost vretena: 5.000 vrt/min Revolver postaje / z gnano orodje: 12/12 Hitri pomik - vzdolžno/prečno: 30 m/min PODROBNOSTI STROJA Krmiljenje: MSX 850 3 Električni podatki Faze: 3 Frekvenca: 50 Hz Napetost: AC 200 V Nazivni tok: 110 A Nazivni tok motorja vretena: 131 A Skupna priključna moč: 32 kW Dimenzije & Teža Potreben prostor: pribl. 2.320 x 1.783 x 1.819 mm Teža stroja: pribl. 5,8 t Delovne ure Knjdpfexhf Efsx Ah Asf Ure vretena: 12.280 h Obdelovalne ure: 13.579 h OPREMA Transporter za odrezke Odsesavanje Roka za merjenje orodij Lovilec kosov Dvojno nožno stikalo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6675 1727 J, potovalna razdalja osi X: 800 mm, pomik osi Y: 460 mm, pomik po osi Z: 510 mm, TECHNICAL DETAILS Travel paths Knodpfx Aewm I Nyjh Asf x-axis travel: 800 mm y-axis travel: 460 mm z-axis travel: 510 mm General information Machine weight: approx. 8 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, CNC machining center MORI SEIKI NH 5000/40 Year: 2003 Technical specifications: X travel: 630 mm y travel: 600 mm z travel: 670 mm Tool holder: BT 40 Spindle speed (infinitely variable): 14,000 rpm Pallet changer with rotary table: 360 x 1° (2 pallets) Max. workpiece weight: 500 kg Tool changer: 60 positions Table size: 500 x 500 mm Ksdjvuql Uepfx Ah Ajnf Total power requirement: 56 kW

Stanje: rabljeno, Leto izdelave: 2008, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 MAPPS III Standard turning diameter: 200 mm Knjdpfotqmqwox Ah Aef Main spindle: - Maximum speed: 6,000 rpm - Drive power (main spindle): 22 / 18.5 kW - Bar capacity: max. 52 mm - Spindle bore: 61 mm - C-axis: 0.001° Counter spindle: - Maximum speed: 6,000 rpm - Drive power (counter spindle): 22 / 18.5 kW - Bar capacity: max. 52 mm - Spindle bore: 61 mm - C-axis: 0.001° Turrets 1 + 3: - Number of tool stations: 16 each - Number of driven tool stations: 16 each - Speed range (driven tools): max. 6,000 rpm - Drive power (driven tools): 7.5 / 5.5 kW - Y-axis: 110 mm (+65 / -45 mm) Turret 2: - Number of tool stations: 16 - Number of driven tool stations: 16 - Speed range (driven tools): max. 6,000 rpm - Drive power (driven tools): 7.5 / 5.5 kW - Y-axis: 110 mm (+45 / -65 mm) Travel paths: - X-axis (1–3): 210 mm - Y-axis (1–3): 110 mm - Z-axis (1+3): 300 mm / (2): 810 mm Total connected load: 90 kVA Machine weight approx.: 9.3 t Space requirements approx.: 4.5 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T3Y3 - Main and counter spindle - 3 turrets, 2x upper / 1x lower - 3x Y-axes - 3x 16-position tool drive - incl. 28 collets - incl. Hainbuch quick-change system

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Drive power – main spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum spindle speed: 6,000 rpm Drive power – sub spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm B-axis: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y Kodpfx Ahsv E R E Ao Aenf - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions