CNC center za struženje in rezkanje

Mori Seiki ZT 1500 Y

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Misinvestment by a corporation. Machine is brand new and unused (already delivered). The machine is available immediately with no lead time. An absolutely rare opportunity. Machine type: Horizontal machining center with pallet changer Gbjdpfx Asxizdasnfsl Model series: NHX 8000 Control: Siemens S840Dsl with CELOS Measuring system: Fully closed scale feedback (X/Y/Z) Machine concept: DCG Travel paths X/Y/Z: 1,400 / 1,200 / 1,350 mm Rapid traverse X/Y/Z: 50,000 mm/min Pallet system: Turn-type pallet changer Number of pallets: 2 Pallet size: 800 × 800 mm Pallet load: 2,200 kg [optionally 3,000 kg] Max. workpiece Ø/H: 1,450 mm / 1,450 mm Pallet change time: 16 s B-axis: Direct drive Minimum index: 0.001° Maximum rotation speed: 100 rpm Spindle: powerMASTER Speed: 16,000 rpm Power: 85/50 kW (10% duty cycle / continuous) Torque: 549/279 Nm Taper: HSK-A100 Cooling: Central spindle cooling Internal coolant supply: optional CTS 7 MPa Tool magazine: Chain-type magazine, 60 positions [optional 100/120] Rack magazine options: 180 / 240 / 330 positions Max. tool diameter with adjacent tools: 110 mm Max. tool diameter without adjacent tools: 320 mm [with >10,000 rpm: 230 mm] Max. tool length: 800 mm Max. tool weight: 30 kg Tool-to-tool: 1.9 s Cut-to-cut: 5.0 s Equipment/options: Workpiece probe Tool measurement Laser tool control (optional) High-pressure coolant supply 7 MPa (optional) Chip conveyor Fully enclosed with roof Dimensions: n/a Weight: n/a Connection data: n/a

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Electrical Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery No guarantee is given regarding the accuracy, completeness, or currency of the information provided. Gbodpfx Ajwi Ty Aonfol

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 4 Gsdpfx Aew D Hwwenfsbl MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 45 kW - Spindle speed: 12,000 rpm LINEAR AXES - Travel X/Y/Z axes: 1700/1400/1240 mm - Rapid traverse speed (X/Y/Z): 48 m/min - Feed speed (X/Y/Z): 20 m/min SWIVEL AXIS B - Travel: 360° - Minimum resolution: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 - Tool change time: 6 s PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1250x1250 mm - Number of pallets: 2 - Max. pallet load: 3,000 kg - Distance from table center to spindle nose: 70–1470 mm - Max. workpiece diameter: 1,970 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 32,500 kg MACHINE HOURS - Power-on hours: 34,422 h ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Synchronized tapping - 3-color status light - Coolant tank * with high-pressure pump: 70 bar * internal coolant supply (through-spindle coolant) * paper filter * coolant chiller * cabin washing system - Chip conveyor - Tool measurement probe - Workpiece measuring probe: Renishaw RMP60 - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Godpfx Asyyuvtjnfobl Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SECONDARY OPERATIONS - Number of positions: 4 Gbjdpfx Anoxlum Tofjl - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 7 kW WEIGHT AND DIMENSIONS - Space requirement: 2200 x 1200 mm - Machine height: 1700 mm - Machine weight: 2200 kg MACHINE HOURS - Power-on hours: 34,143 h - Operation hours: 26,657 h - Spindle hours: 15,552 h EQUIPMENT - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bushing - Part extraction - Parts conveyor belt - Parts ejector - Coolant tank - Bar magazine: FMB turbo 3-26 / 3200 A

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 14.530 h, Krmilna enota Blagovna znamka: FANUC Model: 31i-Model B Glavni pogon Število osi: 3 Gbjdpfx Anox D I Axefol Ta triosni stroj Star SR-20J N je bil izdelan leta 2019. Gre za švicarski stružni stroj, zasnovan za natančnost in učinkovitost. Idealen za zahtevna obdelovalna opravila, ta model nudi robustno zmogljivost v kompaktni zasnovi. Če iščete visokokakovostne možnosti struženja, razmislite o stroju Star SR-20J N, ki ga imamo na voljo. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 1995, CNC ciklični stružnica Proizvajalec: MONFORTS KNC 6, l.1995 Krmiljenje: Monforts MTC K Konjična razdalja: 2000 mm Največji premer vrtenja nad ležiščem: 630 mm Največji premer vrtenja nad suportom: 380 mm Hitrosti vretena: 2 - 1800 min⁻¹ Vretenov motor: 21/15 kW Gsdpohktd Nsfx Anfebl Vreteninska odprtina: 71 mm 3-čeljustni vpenjalni tulec FORKARDT 400 mm Nosilec orodja Multifix velikost C s 3 orodnimi držali. Potreben prostor: dolžina 4000 mm, širina 2200 mm, višina 1900 mm Teža cca: 5000 kg Popolna dokumentacija stroja na voljo. Stroj je pod napetostjo in predstavljen v delovanju.

Stanje: dober (rabljeno), Leto izdelave: 2005, Horizontal Machining Center Machine Type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of Manufacture: 2005 TECHNICAL DATA: Gbodpfx Asv Nhylonfjl Travel distances: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse (X/Y/Z): 50 m/min Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Tool stations: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirements (LxWxH): 9,200 x 4,900 x 3,920 mm Equipment features: Through-spindle coolant (IKZ): bar Chip conveyor High-pressure pumps

Stanje: rabljeno, Leto izdelave: 2003, Maks. premer struženja: 420 mm Dolžina struženja: 1090 mm Krmiljenje: FANUC serija 18i-TB Prehod glavnega vretena: 108 mm Vpenjalna glava: 250 / 315 mm Območje vrtljajev: 0-3750 min⁻¹ Podajalna hitrost: 18/24 m/min Orodja: 12 Hod konice: 100 mm Premer konice: 110 mm Priključek: MK 4 Število gnanih orodij: 12 Obrati: 3000 min⁻¹ Navor: 22 Nm Rezervoar za hladilno tekočino: 140 l Skupna potrebna moč: 22/18,5 kW Teža stroja pribl.: 6500 kg Cilindrično držalo DIN 69880: VDI 50 Obdelava palic: Ne Obdelava v vpenjalni glavi: Da Hidravlična luneta notranji premer: Dm 20-165 mm Godeucgylopfx Anfjbl

Stanje: rabljeno, Leto izdelave: 2015, Turning diameter: 250 mm Turning length: 600 mm Control: FANUC Series 31i-Model A Travel - X: 180 mm Travel - Y: +/-45 mm ----- Main Spindle ----- Spindle speed: 0 – 5,000 rpm Bar capacity: 65 mm --- Sub Spindle --- Spindle speed: 0 – 7,000 rpm Bar capacity: 42 mm --- Upper Turret 1 --- Number of tool positions: 12 Tool holder: BMT 45 Number of axes: X1 / Y1 / Z1 Rotary tool speed: 8,000 rpm --- Upper Turret 2 --- Gedpox I Shpefx Anfjbl Number of tool positions: 12 Tool holder: BMT 45 Rotary tool speed: 8,000 rpm Number of axes: X3 / Y3 / Z3 --- Lower Turret 3 --- Number of tool positions: 12 Tool holder: BMT 45 Number of axes: X2 / Z2 Rotary tool speed: 8,000 rpm CNC Turning and Milling Center | SPINNER - TTS 65 Triplex equipped with main and sub spindle (each with C-axis), 3 Triplex turrets configured for driven tools, and a bar feeder [Top Automazioni X-Files-S Series 3000 Version SX]. The machine has only 3,500 machining hours. The machine is in good condition and can be inspected under power. Please refer to the offer for further technical details. ----- #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex