Mobilne Palete Stretch-Ovoj nakup rabljenega (1.528)

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Cgsdpfjykub Aox Ahxjt Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at wrap start and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop functions, reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program change F02 - Stepless turntable speed adjustment 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 turns) F06 - Number of wraps at pallet top (1 - 10 turns) F09 - Photo eye delay for wrapping height F13 - F16 - Film tension for foot & head wrap / up & down wrap independently adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 savable wrapping programs F01-1 - Cross wrapping (upward/downward) F01-2 - Simple wrapping (up or down only) F01-3 - Push button for manual functions F10-F11 - Wrapping cycle with preset start and stop height F12 - Wrapping to a stored height (deactivates height photo sensor) F22 / F23 - Wrapping cycle for top sheet F29 - Soft start cycle for edge protection placement F30-F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet corners Wrapping cycle with manual or motorized rope formation (optional) Cgsdoykuddjpfx Ahxst Reinforcement cycle via push button FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manual brake roller adjustment on film carriage Film specification: max. outside diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total output: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Built-in frame Photo sensor for black products Cutting device etc. Other units available from stock in Ludwigsburg. Images may show options subject to additional charge.

Stanje: rabljeno, Ti regalni sistemi za zlaganje so idealni kot mobilne skladiščne police. Na voljo so v različnih izvedbah in predvsem s prilagodljivo višino. Nakladalna platforma je zasnovana za vse standardne velikosti palet, pa tudi za obsežno ali težje paletirno blago. Višino regalov za zlaganje lahko določite sami, tako da izberete med Cedpex Ahu Ssfx Ahxsgt

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm – 200mm, for loading with electric pallet truck or forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at stretch start and cycle end Emergency stop button in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All machine parameters adjustable via display F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage lift speed upwards from 1.3 to 5.4 m/min F04 – Carriage lift speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Pallet wrap height setting F62 – Ergonomic film change height ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a set height (disabling photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet edges Cgedpfx Aeykuhcshxjt FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification max. outside diameter Ø 250 mm – core Ø 76mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Other units available from stock at short notice.

Stanje: skoraj kot novo (rabljeno), zasnovan za pakiranje živil na pladnjih, kot so sadje, zelenjava, meso, ribe, sir, perutnina, za ohranjanje svežine in vizualne predstavitve; minimalne dimenzije paketa 90 mm D x 110 mm Š x 10 mm V, maksimalne dimenzije 200 mm D x 300 mm Š x 160 mm V; širina folije 280 mm - 550 mm; leto izdelave 2004 Cgjdpjd Dcyrefx Ahxst

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Schlüsseldaten: Lachenmeier Haubenstretcher Paletten pro Stunde: 50+ Rahmengröße: 3.000 x 2.400 mm Max. Ladehöhe: 1.500 mm Max. Lade-LxB: 1.200 x 1.000 mm Stretchhaubenfolie: 1 Besondere Merkmale: Überholte Stretchhaubenmaschine Dauerhaft verfügbare Ersatzteile durch RHM Packaging Csdpfx Ajvb Tz Ejhxogt Verfügbarkeit Ab Lager bei RHM verfügbar

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), The Cyklop CST 940 is a fully automatic stretch film wrapping machine that ensures fast and reliable pallet wrapping at high output volumes. Under the cover, you’ll find an Atlanta Stretch Mytho A – a model renowned for its robust construction and dependable performance. With a capacity of up to 45 pallets per hour, it is an excellent choice for logistics centers, warehouses, and production facilities seeking to combine efficiency with operational reliability. Thanks to its minimal use and excellent condition, this machine offers the feel of a new unit at the price of a used one. The machine is easily operated via a user-friendly 5.7” touchscreen with multiple program options and can be adapted to various load formats and wrapping requirements. Adjustable speeds for both the rotary arm and film carriage, as well as different pre-stretch levels, provide a flexible solution that delivers high performance and secure, stable packaging. The solution can be customized and extended on request, as we can supply additional conveyors of the same model. Cgodpfx Aow U Rd Uehxet Compressed air required. Shipping and possible assembly are additional.

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Avtomatski stroj s prekinitvenim gibanjem, zasnovan v skladu s cGMP standardi za zavijanje s stretch folijo. Primarno zasnovan za kozmetično in farmacevtsko industrijo, se ponaša z enostavno zasnovo in visoko izhodno hitrostjo. Glavne značilnosti: - Servomotor zagotavlja zanesljivost in sinhronizirano gibanje tudi pri visokih hitrostih - Upravljanje stroja in motorjev preko računalnika - Balkonasta konstrukcija z jasno ločitvijo mehanskih delov v zadnjem delu stroja in potekom izdelkov na sprednji strani - Ergonomska zasnova omogoča enostaven pregled stroja in zagotavlja odlično vidljivost delovnega procesa - Preprosta in linearna izdelava za enostavno čiščenje Cjdpfxsyb Tvte Ahxogt - Hitrost, hodi in pozicije posameznih skupin so nastavljivi preko računalnika s programirljivo logiko, kar omogoča samodejno pravilno nastavitev stroja in izjemno hitro ter enostavno menjavo formatov.

Stanje: rabljeno, Leto izdelave: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Using a tipping device, preforms are unloaded from a container into the feed hopper. From there, the preforms are conveyed by an elevator belt with electronically controlled speed and are supplied via a chute and loading starwheel to the blow molding machine in a uniform orientation. The shape and size of the preforms are inspected, and defective preforms are ejected before being delivered to the heating ovens by a mechanical starwheel. In the heating ovens, the preforms are preheated by infrared lamps. For symmetrical heat distribution, they are continuously rotated during this process. Fans prevent overheating of the outer surface. Finally, preform temperatures are monitored by an optical pyrometer. Grippers feed and remove the preforms to/from the blow wheel. The blowing unit uses 'crocodile molds,' in which the stretching along the longitudinal axis is supported by a stretch rod. The preforms are then blown into PET bottles. The stretch-blown bottles are extracted from the cavities by grippers and conveyed to the discharge station. Machine (additional info): Rotary blow molding machine Cedoxyktlspfx Ahxogt Power: 58 kW Number of cavities: 8 units Number of bottles ejected per cycle: 202 units Blow pressure: 30 bar Voltage: 400 V Frequency: 50 Hz Water supply: 4 bar Compressed air: 360 Nm³/h at 7 bar Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Equipment: Preform feed hopper with container tipping device, preform elevator conveyor, preform inspection, heating ovens, blow wheel, bottle discharge, on-screen visualization Weight: 16,700 kg

Stanje: dober (rabljeno), 5 kosov, mobilni aluminijasti pretakali mostovi – rabljeno – Cena na kos iz lokacije: Tip 1: običajen (približno 2 kosa) zdaj samo 450 € namesto 650 € (neto)! Tip 2: z dvema stranskima pohodnima ploščama (približno 3 kosi) zdaj samo 550 € namesto 850 € (neto)! Proizvajalec: neznan, morda Altec Cgsdpfx Ahoy Iv I Hsxst Tip: neznan, morda HF 09 Leto izdelave: neznano Širina: cca 1,50 m Dolžina z gibljivimi najazdnimi konicami na koncih: cca 2,35 m Nosilnost: neznana, morda 1800 kg Lastna teža: neznana, morda 107 kg Nova cena cca 1.900 € (neto) Stanje: dobro Na voljo: takoj Lokacija: Niedernberg pri Aschaffenburgu

Leto izdelave: 1997, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 13205, For sale: Pallet wrapping machine by STREMA. This machine is ideal for companies prioritizing transport security and efficiency. Technical details: Manufacturer: STREMA Stretch Packaging Systems Model: M 500 Year of manufacture: 1997 Machine no.: 13205 Connection: 400 V Power: 0.4 kW Base dimensions: 2,500 x 1,500 mm Turntable diameter: 1,500 mm Cgjdpjy Em Dtefx Ahxjt Total height: 2,500 mm Recommended installation area: 4 x 3.0 m Max. pallet weight: 1,500 kg Transport and loading can be organized Europe-wide upon request and for an additional charge. Prices are plus VAT Inspection by appointment possible. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for high-quality yet affordable metalworking machinery for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2000, Kemper Superba naprava za zaokroževanje in podaljševanje kruha - rabljena - letnik pribl. 2000 - tehnično stanje dobro - stroj po servisu - zmogljivost do 2.000 kosov/uro Csdpfx Aey Hrm Nshxegt - razpon teže 200-2.000 g - prevzem iz skladišča/možnost dostave - cena na povpraševanje

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.500 kg, skupna dolžina: 6.000 mm, skupna širina: 1.800 mm, skupna višina: 2.250 mm, Stanje: Novo Montaža in servis: po vsej Evropi Usposabljanje: vključuje usposabljanje operaterja Garancija: proizvajalčeva garancija Največje mere palete: 2x 140 cm x 140 cm Način delovanja: sistem z dvema mizama (desna in leva miza) Vsestranost: pribija vse vrste palet in podkonstrukcij Pomnilniška kapaciteta: kapaciteta za 900 različnih tipov palet Upravljanje: enostavno in intuitivno rokovanje Krmiljenje (jeziki): angleščina, nemščina, poljščina, francoščina, italijanščina, španščina Avtomatizacija: samodejno generiranje poti gibanja Cgedpfx Ahjphmwbexst Možnosti: mere stroja individualno nastavljive (na voljo do 13 metrov dolžine)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Box pallet tipper Clearance: 1240 mm x 1200 mm x 800 mm Cjdpfx Aewbaagohxsgt Overall dimensions: 2000 mm x 1700 mm x 1530 mm

Stanje: dober (rabljeno), Približno 1.000 kosov zložljivih regalskih stojal za industrijske palete, pocinkano, 1 t, možno zložiti v 4 nivojih – rabljeno: Cena na kos iz lokacije: samo 75 € (neto)! Cena na kos ob nakupu 100 ali več kosov: samo 65 € (neto), iz lokacije. Proizvajalec: Reimuth GmbH Tip: Grau Letnik: 1992 Višina: približno 1,90 m Ena stojalo je sestavljeno iz dveh okvirnih delov (2 x “L”), ki se sestavita v eno stojalo (industrijska paleta). Vse brez vijakov, le s tečaji. Cgsdpfxsyzc Awe Ahxst Dovoljena nosilnost: 1 t Dovoljeno dodatno nalaganje: 4 t Možno zložiti do 4x Vročecinkano Prodaja brez industrijske palete Stanje: dobro Na voljo: takoj Lokacija: 73079 Süßen

Leto izdelave: 2012, stanje: rabljeno, Ratiostretch RS10/2 RA1978 Mast height: 2540 mm Width: 1650 mm Turntable diameter: 1650 mm Length: 2600 mm Max. pallet weight: 2000 kg Maximum pallet height: 2330 mm Max. pallet dimensions: 1100 x 1200 mm Turntable speed: 12 rpm (max.) / 3 rpm (min.) Codpfx Ahek Abplsxsgt Carriage speed: 4 m/min (max.) / 0.6 m/min (min.) Turntable height: 85 mm Voltage: 230V, 50Hz, 6A Year of manufacture: 2012 Weight: 450 kg Film width: 450–500 mm Film diameter: 240 mm Roll weight: up to 20 kg Film thickness: from 7 µm Current installation: recessed into the floor, optional drive-on ramp available. Prices quoted are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you! Best regards, The Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Cgedpfx Ajykucmehxot Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MARATHON01, Semi-automatic manual film wrapper MARATHON TECHNICAL DETAILS The only "PATENTED" non-electrically powered mobile stretch wrapper worldwide capable of wrapping pallets with LLDPE stretch film. The machine wraps loads of any shape, weight, and size. It is recommended to use pre-stretched film with a roll diameter of max. Ø 230 mm. Minimum load dimensions: 650 x 400 mm. Minimum load weight: 50 kg. Wrapping height (including pallet): 2000 mm. Easy operation without reliance on a motor. Manual movement by the operator. The film carriage is moved up and down manually. The machine features simplified functions. Replaces manual hand wrapping. MANUAL WRAPPING OPTIONS The operator functions as the motor; number of wraps up and down is freely selectable. FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage. Film specification: Max. outer diameter Ø 230 mm - core Ø76 mm - height = 500 mm. Cgjdpoykuf Ijfx Ahxst Optional: Stretch film with core Ø50 mm or coreless. Additional machines available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S Cedpfxsykuh Ne Ahxjgt with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2021, obratovalne ure: 10 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S21MythoEasyLow04, Ex-demo machine - like new. MYTHO EASY Low Very low-profile unit Wrapping height: 2400 mm Turntable: 1650 mm LP flat turntable: 30 mm low – 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double roping system – see pictures. Automatic film cutting Optional: film clamp on turntable German Schuko plug 6 individually programmable settings Cgodpfx Ahsx Ta Nxsxot Additional demonstration units available from stock for immediate delivery. Prices ex stock Ludwigsburg.

Leto izdelave: 2024, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS04,

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Cjdpoykuiasfx Ahxjgt Additional units available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS04, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film application and cutting. Cjdpfx Ahjykug Soxogt 99 individually programmable programs Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Film power stretch: 120-400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film application tension electronically controlled by control unit Quick-load IEF system for easy film roll change Film specification: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah, connected in series At least 160 pallets per charge – charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height "machine with mast (pallet included): 2,150 mm Height detection by light sensor or by manual input via display Protective bar for emergency stop of drive unit Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light when machine is started Fall protection for the film carriage Pushbutton for start & stop Machine operation compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Carriage speed independently adjustable upwards and downwards - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting of pallet wrapping height - Film application tension for base & top wrap / ascent & descent independently adjustable - Film pre-stretch for base & top wrap / ascent & descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (upwards/downwards) - Simple wrapping (only upwards or only downwards) - Wrapping cycle with defined start and stop height - Wrapping to a saved height (switching off light sensor for height) - Wrapping cycle for large-sized pallets - Wrapping cycle for top sheet film - Soft start cycle for application of edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film breakage on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Other units available from stock in Ludwigsburg for immediate delivery

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23EVA01,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost na odsek shranjevanja: 3.000 kg, skupna dolžina: 8.500 mm, višina police: 4.500 mm, število vrst polic: 1, prosta razpetina: 2.700 mm, 1 racking aisle pallet rack (M45112711-3) - 8.5 m length, 4.5 m height, 1.1 m depth - 3 bays, each 2.7 m wide - 3 beam levels per bay, shelf load capacity 3,000 kg Included in delivery: - 4 frames (RM4511 – RAL5019) - 8 base plates, shims, and assembly material - 16 floor anchors (ZZBA1210) - 18 individual beams (T2711 – RAL2008) - 1 load capacity sign (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Delivery within a maximum of 20 business days after receipt of payment - Delivery to site / installation location free of charge - Unloading from the truck to be carried out by the buyer with their own lifting equipment - Deliveries are made throughout the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement. Cgedsv Urqxjpfx Ahxst