Mobilne Soka nakup rabljenega (1.270)

Leto izdelave: 2020, obratovalne ure: 20 h, Stanje: kot nova (razstavni stroj), The mobile units are used for on-site processing of fruit juices. The fruit is unloaded from the large box tipper into the washing tank, transported to the mill, ground, and then fed to the belt press. The produced juice is automatically pumped into tanks, heated to approximately 80 degrees Celsius in the pasteurization unit, and filled into Bag in Box containers. The following machines are installed on the trailer: • Large box unloading unit Kreuzmayr GKE • Washing elevator Kreuzmayr KWEM 2000 • Single-belt press Kreuzmayr KEB 750 with cleaning brush • Large juice pan for KEB 750 • Movable pomace conveyor belt made entirely of stainless steel • Stainless steel always-full tank 530 l with immersion sieve • Pasteurizer Kreuzmayr Pas 1500 liters oil • Bag in Box filler Kreuzmayr KBF 2000 special design for the mobile plant • Accessories such as pumps, compressed air compressor, high-pressure cleaner, hoses, and connectors • Trailer with tarpaulin body, compressed air braking system, and ABS Gjdpfxec Rghys Afqsbg The trailer has very low operating hours and is therefore in like-new condition.

Stanje: dober (rabljeno), Sales counter, sales counter table, stainless steel, cabinet, work table - Drawers: 2 - Table dimensions: 700/1600/H830 mm - Canopy dimensions: 1800/1670/H2330 mm - Version: robust construction Gsdpfx Afeb Uhnijqjbg - Transport dimensions: 2060/730/H870 mm - Weight: 120 kg

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Godpfox Hhfhsx Afqobg Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -74.5°C to +70°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Internal dimensions (W x D x H): 470 mm x 650 mm x 410 mm External dimensions (W x D x H): 930 mm x 2115 mm x 1970+ mm Access port: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg For your security as a buyer, please note the following information! The following steps are carried out in advance for our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data and details!) We will be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Orange juice vending machine Gbjdpfefnbnqsx Afqeg Country of origin: Spain Manufacturer: Zummo Model: Z10A Weight: 298 kg Feeder capacity: 45-50 kg (110 lbs) Automatic delivery: 100-110 servings without the need to refill fruit Delivery time: 20-26 seconds Fruit size: 55-75 mm Optional: Large fruit kit: 70-90 mm Refrigerant: R134A Dimensions: 1830 mm x 1000 mm x 680 mm

Leto izdelave: 2000, obratovalne ure: 104.382 h, Stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test assesses the resilience of components, devices, and other products against rapid ambient temperature fluctuations. Test specimens are subjected to swift changes in air temperature, with varying upper and lower temperature loads. Through these cyclic loads and the accelerated aging caused by temperature variation, material weaknesses can be detected. Key Features: - Vertical chamber configuration - Ball screw drive for secure guidance of the carrier basket - Basket load capacity: 50 kg (VT3 7012 S2) - All-round mesh in the basket secures the test specimens - High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber - Hot chamber can be used as a temperature storage unit, cold chamber for temperature variation testing - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Nominal Voltage: 400 V Nominal Power: 10 kW Nominal Current: 25 A Refrigerant: R452A Cooling Unit: water-cooled Shock cooling (liquid nitrogen cooling) via customer-provided nitrogen supply External Dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class Device: IP 42 Control Panel: IP 20 Control Cabinet: IP 54 Characteristic Values for Temperature Testing in Single-Chamber Operation Temperature Range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature Deviation Over Time: ±2 K (steady state) Temperature Deviation Spatial: ±2 K (steady state, in basket) Gjdpfx Aox Exmtjfqjbg Heating Rate Hot Chamber: 11 K/min Cooling Rate Cold Chamber: K/min Heating Rate Cold Chamber: 2 K/min Cooling Rate Hot Chamber: K/min Inspection window: 355 x 355 mm Cable port: 67 mm Year of Manufacture: 2000 Operating Hours: 104,382 Weight: 1,000 kg More items – new and used – available in our shop! International shipping costs on request!

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 630 t, moč: 110 kW (149,56 KM), skupna širina: 2.400 mm, skupna dolžina: 9.400 mm, skupna višina: 3.800 mm, skupna masa: 50.000 kg, dolžina rezanja (maks.): 1.600 mm, vrsta vhodnega toka: trifazni, Scrap Shear MS-6300mex (Mobile Scrap Shear with Electric Motor) A 250kW diesel generator can be offered separately. Model: MS-6300mex Cutting force: 630 t Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 8–15 t/h Machine weight: 50 t (+ diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-efficient - No foundation required Gbjdpfer Ihziex Afqeg The scrap shear is capable of cutting almost all types of scrap material. Note: The machine is not recommended for cutting high-carbon steel, such as: axles, wire ropes, pig iron, spring steel plates, rails, alloy steel, hubs, etc. (These hard materials will damage the cutting blades) Function: Scrap is loaded into the feed area with an excavator. Due to the horizontal feed area and the scrap’s own weight, it falls down into the loading chamber and cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carrier over the blades mounted at the front wall. As the tool carrier moves horizontally, the processed material is extruded over the blades at the front of the container. When returning to the rear position, the loaded scrap moves into the shear under its own weight. Scrap shears are available in various configurations according to customer requirements, and the output size can be selected (for new orders). Inspection and trial operation are possible.

Leto izdelave: 2025, Stanje: novo, consisting of: - Trailer - Washing elevator KWEM 1000 - Belt press KEB 400 - 2 x 220 l tanks with immersion sieve - Pasteurizer PAS 500 oil - Bag-in-box filler KBF 2000 for mobile unit - Accessories such as pumps, air compressor, high pressure cleaner, ... Gedpscl Tq Usfx Afqsbg

Stanje: rabljeno, Bertolaso Athena 40/8 fruit juice filler with adjustable starwheels comprising: - Vacuum filler with 40 filling valves - 8-head screw capper for 3 closure types: aluminum screw cap 28 TS RO PP (MCA28), VC 30x60 (BVS 30/60), and pick & place plastic screw cap with 38 mm magnetic torque head prepared Gbodpsxytzxsfx Afqeg

Stanje: zelo dobro (rabljeno), RS-Simulators RS-Simulators ST2K 320/70D Water-cooled Thermal Shock Test System For sale is a high-performance thermal shock testing system, model ST2K 320/70D. Gbedpfx Aswx Ip Defqog This system is ideal for standard-compliant thermal shock testing in accordance with DIN EN 60068‑2‑14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic specimen basket transfer, this system offers the perfect solution for component, material, and reliability testing in industry, research, and quality assurance. Main Technical Data: Temperature Ranges Upper test chamber: +40 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Humidity Testing (optional) – Upper test chamber Temperature: +40 °C to +90 °C Relative humidity: 20% to 98% r.H. (±2–5%) Specimen Basket Transfer: Vertical movement, < 10 seconds transfer time Power Supply: Total rating: 16 kVA Current consumption: 32 A Main fuse: 3× 35 A slow-blow Power connection: 3× 400 V / N / PE / 50 Hz Main cable: 5× 16 mm² Water & Compressed Air Connections: Cooling water inlet: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Condensate drains: 2× G ½", 1× G ¼", non-pressurized Deionized water inlet: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & Weight: Specimen basket internal dimensions (Type ST2K 320) Internal: Width approx. 430 mm, Height approx. 470 mm, Depth approx. 700 mm External: Width approx. 1100 mm, Height approx. 2300 mm, Depth approx. 2300 mm Weight: approx. 1150 kg Other Technical Data Sound level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3,800, limit 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12,100, limit 0.68 kg/m³) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% r.H. For your safety as a buyer, please note the following: The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information excepted!) Further questions can gladly be answered by phone.

Stanje: rabljeno, Rabljeni jekleni regal za zlaganje 1300x1130x300 mm, vključno s 4 stebri 1170x60,3 mm. Gbodpfx Afsw A N Rdeqjg Jekleni regal za zlaganje je rešitev za vse, ki iščejo največjo prilagodljivost in učinkovitost v skladiščenju. Namenjen je učinkovitemu in varnemu skladiščenju ene evropalete. Zaradi svoje robustne konstrukcije iz

Stanje: novo, Mobile baling plant with conveyor or packing press Gbsdpfxeb Nvffj Afqeg - Configuration adaptable according to hourly output More detailed information available upon request!

Stanje: rabljeno, Leto izdelave: 1995, Concentration plant for the juice industry. The plant was originally built in 1977 and was rebuilt in 1992. During the rebuild, it was expanded and equipped with a new cooling tower circuit. The plant is designed for 6,600 kg/h of cloudy apple juice. In single-stage concentration, the juice is thickened from 12° to 25° Brix. In the second pass, up to 71° Brix can be achieved. Machine (additional feature): Concentration plant with aroma recovery Input quantity (apple juice): 6,600 kg/h Water evaporation: 4,840 kg/h Output quantity (juice concentrate): 1,760 kg/h Steam consumption: 1,685 kg/h Length: 7.70 m Gjdswu N T Aopfx Afqobg Width: 6.70 m

Leto izdelave: 2025, Stanje: novo, For emptying fruit and vegetables from wooden or plastic crates into a washing system, onto a sorting belt, or into a water bath. The discharge volume from the crate can be regulated via a stepless hydraulic tipping mechanism and a dosing slide gate. Gbjdscl Tx Djpfx Afqjg Filling the large crate tipper can be done using a forklift or pallet truck. Standard version: Lifting capacity: up to 550 kg per crate Drive motor power / electrical connection: 2.2 kW; 240 V, 3-phase, 60 Hz Weight: 350 kg Dimensions: 1680 x 1420 x 1255 mm Discharge width: 500 mm Tilting cycle time: 15 seconds.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Multi-blade saw MEM Cobra 2MT - 2 movable couplings - Hydraulically floating saws - 2 motors, 30 kW each - Cutting height: 100 mm - Cutting width: 900 mm - 2 hydraulic pumps: 15 kW and 7.5 kW - Electronic control - 4 line lasers - High efficiency - Weight: approx. 8,000 kg Gjdpfxjmv H Dqe Afqebg

Stanje: rabljeno, Weiss Type: TS 130 Temperature Shock Test Chamber, Water-Cooled Specification: - Temperature range hot chamber: +60°C to +220°C - Temperature range cold chamber: -10°C to -80°C - Transfer between hot/cold chamber: 10 sec. - Temperature stability: ±1 K Dimensions and further data: - External dimensions: Height 1990 mm - Width (without and with door hinge): without approx. 1820 mm / with approx. 1850 mm - Depth (without and with test chamber door): without approx. 900 mm / with approx. 1155 mm - Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm - Volume: 130 liters - Maximum test chamber load: 20 kg - Maximum floor load in test chamber: 20 kg - Cooling water pressure: min. 2 ... max. 6 bar - Max. circuit protection: 35 A (plug 32 A CEE) - Sound pressure level, 1 m in front of unit: approx. 65 dB(A) - Refrigeration cascade, water-cooled - Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW - Rated current: 26.0 A - Refrigerants: R404A / R23 - Weight: approx. 950 kg Condition: used Scope of delivery: (see picture) (Changes and errors in technical data reserved!) For further questions, feel free to contact us by phone. Gbjdpfevwckhjx Afqjg

Stanje: rabljeno, To stojalo za zlaganje se lahko uporablja kot mobilna skladiščna polica. Na voljo je v različnih izvedbah, predvsem pa je prilagodljivo po višini. Nakladalna površina je primerna za vse velikosti palet, zasnovana za okorne ali težko paletirne izdelke. Gbjdox Ahu Sopfx Afqjg Višina se določi z izbiro iz spodnjih dolžin:

Leto izdelave: 1993, Stanje: dober (rabljeno), Offer 23100 Technical Data: Gbedpfxjlnkrme Afqeg - Pressing capacity steel: 2 to 4 mm - Pressing capacity INOX: 2 to 3 mm - Horizontal throat depth: 30 mm - Vertical throat depth: 40 mm - Hydraulic unit: Make NOLD, Type No40.9-4, Year 1993 - Operating pressure: 250 bar - Drive: 400 V / 4 kW - Space requirements: W 600 x H 800 x D 900 mm - Weight approx.: 350 kg

Stanje: rabljeno, Hydraulic power unit for mobile clinching pliers or ECKOLD mobile former, type HA 500 / 2 Serial no. 737 / 783 Year of manufacture: 1991 Hydraulic power unit type HA 500 / 2 Operating pressure: 50 - 500 bar, adjustable Flow rate: 2.6 l/min Tank capacity: 16 liters Motor power (hydraulics): 3 kW Rated power: 3.1 kW Power supply: 380 Volt, 50 Hz Control voltage: 24 Volt DC - Pressure line with screw coupling - Equipped with HAWE GS 2-2 solenoid valve Gbedpfxoquzfcj Afqog - Mobile on 4 swivel castors Weight without hydraulic oil: 125 kg In good condition

Leto izdelave: 2025, Stanje: novo, comprising: Godpscl Tvgjfx Afqobg - Trailer - High conveyor with removable hopper - Pomace conveyor belt for pomace discharge - Washing elevator KWEM 2000 - Belt press KEB 500 - 2 x 300 l tank with hanging strainer - Pasteuriser PAS 750 Oil - Bag-in-Box filler KBF 2000 for mobile unit - Accessories such as pumps, compressed air compressor, high-pressure cleaner, ...

Leto izdelave: 2023, Stanje: novo, SEMIX M160S4 offers the highest worldwide capacity among mobile concrete batching plants. The SEMIX Mobile 160S4 is equipped with twin-shaft concrete mixers with a capacity of 6,000/4,000 litres. Depending on the silica content in the concrete mix, SEMIX mixers use NiHard4 or Hardox 450 wear parts. Aggregate storage bins can be loaded using wheel loaders over a single ramp. The aggregates are weighed on the weighing conveyor, which then transfers the materials onto the discharge conveyor. Two separate conveyor belts ensure weighing accuracy and result in higher concrete output. Gbjdegazb Dopfx Afqog All SEMIX aggregate storage bins feature a trapezoidal design for added stability. All SEMIX concrete batching plants are controlled by a SCADA system integrated with Schneider PLC. Users can monitor all materials used and integrate this information into their CRM systems. For service purposes, the SEMIX engineering team can access the automation system online.

Leto izdelave: 2008, Stanje: dober (rabljeno), For sale: a complete production and packaging line for fruit and vegetable juice. The line consists of the following machines: fruit and vegetable pulp milling and production line (MEGA feed hopper, MEGA 2012 rotary screen, MEGA 2008 slat elevator, MEGA 2008 brush washer, MEGA 2008 roller inspection conveyor, 2017 screw conveyor, pulp centrifugal pump, pulp tank, FLOTTWEG 2008 belt press, FLOTTWEG 2008 wash water tank). Gbedpfx Aspqxvxjfqeg We also have a juice packaging line for sale: juice cooling system – STM 2018, packaging line (triblock – STM 2014, buffer tank STM 2014, bottle orientator STM 2013, capping machine STM 2013, HITACHI 2016 printer, 2018 labelling machine).

Stanje: dober (rabljeno), Leto izdelave: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber -80 °C to +220 °C The Vötsch VT 7030 S2 environmental test chamber is designed for laboratory applications requiring the testing of materials and components under controlled environmental conditions. With its versatile capabilities and user-friendly controls, this programmable unit can be used to simulate a wide range of environmental conditions for scientific studies, product testing, and process control. Specifications for temperature testing in single-chamber operation: Hot chamber: Temperature shock test chamber, 300 l Temperature range: +50 °C to +220 °C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: ±2 K Temperature gradient (according to IEC 60068-3-5): 4 K Temperature change rate (according to IEC 60068-3-5, measured in supply air): Heating: 11 K/min Cold chamber: Temperature shock test chamber, 300 l Temperature range: -80 °C to +70 °C Temporal temperature deviation at the center of the working space: ±1 K Spatial temperature deviation: 2 K Temperature gradient (according to IEC 60068-3-5): 4 K Gbedswbdv Sspfx Afqog Temperature change rate (according to IEC 60068-3-5, measured in supply air): Heating: 1.5 K/min Cooling: 4 K/min Technical Data: Temperature shock test chamber Test chamber volume: approx. 300 l Voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a /R-23 Refrigeration system: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber internal dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Enclosure external dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 Find more items—new and used—in our shop! International shipping costs available upon request!

Leto izdelave: 2024, Stanje: novo, The mash on the belt is pressed against cylinders and the extracted juice flows into collection trays located beneath the press. The pressing process of the Band Press 400 is continuous. Capacity: 400 kg/h The most advanced feature of our POWERPRESS line is the integrated pump and accompanying collection tank built into the Band Press 400. This not only saves you the cost of purchasing a separate tank and pump, but also significantly reduces space requirements. The juice yield from apples with our band press is approximately 75%. A sieve system is integrated into the collection tray, ensuring that the juice is filtered during the pressing process, resulting in an even purer product. The band press operates automatically. When the mash container is full, the machines feeding the band press will automatically shut off. When the collection tray is full, the juice pump transfers the juice to tanks. The band press is equipped with a high-pressure cleaner that continuously washes the machine’s belt. Our belt washing system is simple, contains no motors or gear reducers, thereby extending the service life and reducing maintenance costs. After operation, the band press should be manually washed with a water jet. A complete wash cycle takes about 15-20 minutes. Cleaning is straightforward, and all components of the band press can be removed easily without tools. Godpfoflpnyex Afqobg The belt tension is adjustable. The machine is made entirely from stainless steel and features adjustable feet. Easy to clean, with no enclosed or hard-to-reach areas; all parts are simple to assemble. Interested in a band press with a different capacity? Take a look at our other models: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500.

Leto izdelave: 2024, Stanje: novo, Mehanski dvojni filtri za sok so izdelani iz nerjavečega jekla. Komplet vključuje dva vzporedna filtra iz nerjavečega jekla, ki lahko delujeta ločeno eden od drugega. Dvojni filtri za sok filtrirajo sok in odstranjujejo različne večje delce, kar zagotavlja posebej čist izdelek. Ventile na filtrih je mogoče med pranjem ali za druge namene posamezno zapirati. Razpoložljive mreže: 60 µm, 200 µm, 300 µm, 400 µm, 500 µm. Priključek: D25. Kapaciteta: 2.000 L/h. Nerjaveče jeklo zagotavlja dolgo življenjsko dobo in kakovost izdelka. Filtre iz nerjavečega jekla je po uporabi enostavno očistiti. Gbodjhu Aafspfx Afqog

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: 6696301000, Rabljeni Hosokawa model 20-MSC-43 vertikalni homogenizator prahastih mešanic - nauta. Gbjdpfxsx R S Tko Afqsg - Delovni volumen: 1700 litrov. - Delovni tlak: Atmosferski. - Kontaktni deli, ki so v stiku s proizvodom: Nerjaveče jeklo 1.4301. - Stožčasta posoda ima mere (pribl.): Premer 2048 mm x višina stožca 2820 mm / skupna višina 3523 mm (spodnji rob izpustnega ventila - pogon). - Zgornji polkrožni pokrovi: 1x dvižni pokrov z varnostno mrežo, 1x vijačen pokrov s prirobnico DN200 in DN100. - Konzolno namešano polžasto mešalo: poganja elektromotor z močjo 5,5 kW, končna hitrost polža 70 obr/min. - Roka: poganja elektromotor 0,55 kW, končna hitrost roke 1,2 obr/min. - Priloženo: izpustni ventil. - Montaža: (3) noge.