Mikron Wf 31 C nakup rabljenega (188)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2001, obratovalne ure: 3.260 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 730, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 685 mm, teža obdelovanca (maks.): 1.500 kg, največja hitrost vretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Kodpoxxzqrjfx Adkslp Travel X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Working spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine slots: 46 Max. tool diameter (fully occupied): 80 mm Max. tool diameter (partially occupied): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feed Rates and Rapids Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space required (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will presumably be carried out on a truck with a 3,000 mm loading width.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the successful bidder to collect the item within the specified period between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Kljdpsxxzpusfx Adkjp Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 slots Tool holder: ISO-B40 Travel Distances Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 600 mm Table NC rotary-swivel table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped swivel axis): 10,000 N Rotational speed of rotary axis: 12 rpm Swivel Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotational speed of rotary axis: 4 rpm Controller: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders shown in the pictures are included in the scope of delivery. The tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the sale or delivery. The drive for the head swivel axis is missing.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Mikron / GF HPM 450 U WPC with Pallet Changer About the Machine: High-precision 5-axis simultaneous milling machine with 7-station pallet changer (WPC). Excellent condition, extensively equipped! Very few spindle hours! Technical Data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45 / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of magazine tool stations: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid traverse X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Equipment: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-station pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction unit - Tool blow-off device - Air blower on spindle slide - Air blast through spindle center - Internal coolant system 18 – 70 bar - Paper band filter unit - Chip conveyor - Spindle oil cooler Installation dimensions (L x W x H): 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg Klodpfx Adsx Hx Rhoksp Inspection / test under power on site is available, of course. We are not your average machinery dealer – You will be advised by a CNC expert here! We would be happy to offer you transport, installation, commissioning, and training on the machine with our own technicians. Everything from one source: We, Baumgärtner CNC GmbH & Co.KG, are a specialist company focused on: - Service - Maintenance - Overhauling - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, to transport and installation, right through to commissioning and subsequent maintenance or repair work, you can count on us.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: Kodpfx Adsxu Hkcokelp - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Kodpfjt Hwxbjx Adkjlp Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: zelo dobro (rabljeno), Merilnik kota, enkoder, rotacijski dajalnik, absolutni rotacijski dajalnik - Proizvajalec: Heidenhain, merilnik kota z lastnim ležajem, v originalni embalaži Kledpfx Adsqrwxaekep - Tip: RCN 619.5GS5-19B00 - Št. artikla: 249 003-19 - Količina: 1x merilni instrument na voljo - Cena: na kos - Dimenzije škatle: 180/140/V90 mm - Teža: 1,0 kg

Stanje: dober (rabljeno), Leto izdelave: 2001,

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, Shown spare parts by hand are not included. Pallet changer EROWA is not included. Kodom Dtnropfx Adkslp

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Kedpfx Adewk Nm Iokolp Ročno prikazani deli niso priloženi. SK 40, 24 mest za orodja v menjalcu orodij. 10.000 min⁻¹

Stanje: dober (rabljeno), Teile auf dem Tisch sind nicht enthalten. Mit Rot markiert. Kedpswxdyxjfx Adkjlp

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Kjdpfxjwx Rafe Adkolp Z 500 mm 10.000 vrt/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 10.615 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 108.007.00.0065, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 900 mm, pomik po osi Z: 800 mm, obremenitev mize: 2.000 kg, največja hitrost vretena: 10.000 obr/min, Payment deadline for the machine is November 20, 2025! Submission of a bid obligates the winner to collect the machine on time, within the pick-up window from December 1, 2025 to December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm TECHNICAL DETAILS Kjdpfxexnkqao Adkjlp Working Areas Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Worktable Table dimensions: 1,700 x 850 mm Max. table load: 2,000 kg Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose to table: min. 100 mm / max. 900 mm Spindle speed max.: 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Max. tool diameter without adjacent free slots: 85 mm Max. tool diameter with adjacent free slots: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm The height can be reduced to 2,900 mm if required. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Power-on hours: 30,204 h EQUIPMENT 3D probing system Technical documentation

Stanje: dober (rabljeno), Leto izdelave: 1972, Premer kolesa - maks. 80 mm Širina kolesa 60 mm Modul - maks. 3 Modul - min. 0,1 Klodpow N S D Sefx Adkjp Skupna potrebna moč 0,4 kW Teža stroja pribl. 120 kg Potrebni prostor pribl. 0,6x0,6x0,75 m Stroj je namenjen brušenju majhnih stožčastih oziroma ravno zobatih zobnikov. Za rezkanje stožčastih zobnikov se uporablja Mikron 102.01.

Stanje: rabljeno, Leto izdelave: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 – 6300 rpm Spindle power 11 kW Number of tool magazine stations 2 x 22 Control HEIDENHAIN, TNC 426 Ksdpfxetz Sqho Adkelp Total power requirement 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2001, obratovalne ure: 3.260 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 730, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 685 mm, teža obdelovanca (maks.): 1.500 kg, največja hitrost vretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid obligates the buyer to collect the machine within the specified timeframe from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travels Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Working spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 sec Tool interface: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine slots: 46 Max. tool diameter (fully loaded): 80 mm Max. tool diameter (partially loaded): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feed Rates and Rapids Rapid traverse X, Y, Z: 30 m/min Table Klsdpfxoxm Tx Do Adkjp NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load: 1,500 kg Centering hole: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine ON hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space requirement (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport is expected to take place on a truck with 3,000 mm loading width.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025. By placing a bid, you commit to collecting the machine on time between 01/12/2025 and 05/12/2025. TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 slots Tool holder: ISO-B40 Travel paths X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Ksdoxm Txkspfx Adkslp Spindle hours: 6,191 h Machine on-time hours: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders visible in the photos are included in the sale and delivery scope. The tools clamped in the holders, such as drills, reamers, cutters, etc., are NOT included in the sale and delivery scope. The drive of the head's tilting axis is missing.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 1.889 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 860 mm, pomik osi Y: 560 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, Obdelovalni center s samo 1889 urami vretena! TEHNIČNI PODATKI Pomiki Pomik X-os: 860 mm Pomik Y-os: 560 mm Pomik Z-os: 600 mm Podatki o vretenu Maks. hitrost vrtenja vretena: 10.000 min⁻¹ PODROBNOSTI O STROJU Ure vretena: 1.889 h Ure vklopa: 42.782 h Število krmiljenih osi: 3 Model krmiljenja: HEIDENHAIN iTNC530 Kedpfxow Ngmue Adkjlp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: 0144, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 17.716 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 675 mm, model krmilnika: Heidenhain iTNC 530, TEHNIČNI PODATKI X-pomik: 1.200 mm Y-pomik: 600 mm Z-pomik: 675 mm Delovna hitrost vretena: 30 - 8.000 vrt./min Vpenjalni sistem orodij: ISO B 40 Velikost mize: 1.220 x 620 mm T-utorji: 18 T-utorji: 5 x 18 mm Razdalja med T-utorji: 100 mm Obremenitev mize: 1.700 kg Krmilni sistem: Heidenhain iTNC 530 Pomik X/Y Z: 3.000 mm/min Hitri pomik X,Y / Z: 24 / 20 m/min Ksdpfxexr Nuxe Adkolp PODATKI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Krmljna napetost: 24 V DC Priključna moč: 16 kW Teža: 8.000 kg Obratovalne ure Krmiljenje vklopljeno: 44.842 h Stroj vklopljen: 36.513 h Programski tek: 15.882 h Pogoni vklopljeni: 31.655 h Vreteno vklopljeno: 17.716 h

Stanje: rabljeno, Leto izdelave: 2007, Vertikalni CNC obdelovalni center MIKRON VCP 800 W S konturno krmiljenjem Heidenhain iTNC 530 Kledpfx Aew Iqh Hedkjp Leto izdelave: 2002 Pomiki: X 800 Y 650 Z 500 Območje vrtljajev: 0 - 14.000 min⁻¹

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Stroj je v dobrem stanju, ročno prikazani deli niso vključeni v komplet. X 1025 mm Ljbijwx N Nfsa A Hkmsad Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 obr./min, HSK 63 Kedpfxow Dbt Tj Adkelp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 530 i, največja hitrost vrtenja: 10.000 obr/min, število mest v zalogovniku orodij: 24, Obdelovalni center MIKRON VCE600PRO z pomiki po 3+2 oseh X 600 Y 450 Z 540 mm, SK40 s 10.000 obr/min in ATC za 24 orodij. Odlično stanje. Kodpfxjqi Ufxj Adkelp

Leto izdelave: 1997, stanje: rabljeno, Cena: Na zahtevo Klodpownh Hhefx Adksp - Leto izdelave: 1997 - Dokumentacija na voljo: Ne - CE certifikat: Ne - Krmiljenje: CNC - Moč [kW]: 22,0 - Število osi [kos]: 3 - Gibanje X-osi [mm]: 1000 - Gibanje Y-osi [mm]: 750 - Gibanje Z-osi [mm]: 750 - Vpenjalni sistem orodja: ISO40 - Maks. hitrost vretena [vrt/min]: 12.000 Finančne informacije DDV: Navajena cena je brez DDV DDV/diferencirana obdavčitev: DDV je odbitna za podjetja Dostava in odkupi so možni kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 107.44.00.072, potovalna razdalja osi X: 800 mm, pomik osi Y: 650 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 20 m/min, teža obdelovanca (maks.): 500 kg, širina mize: 600 mm, dolžina mize: 600 mm, obremenitev mize: 500 kg, skupna masa: 9.900 kg, največja hitrost vretena: 20.000 obr/min, število mest v zalogovniku orodij: 30, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Mikron UCP 800 Duro – 5-Axis CNC Machining Centre We offer for sale a precision 5-axis CNC machining centre Mikron UCP 800 Duro, manufactured by the renowned Swiss brand GF Machining Solutions. This machine is ideal for machining complex components, moulds, dies, and parts that require the highest accuracy and surface quality. Klodpewww Rhefx Adkep

Stanje: rabljeno, X-hod 450 mm Y-hod 400 mm Z-hod 400 mm Krmilnik Heidenhain TNC 355 Območje vrtljajev 40 - 4000 U/min 21 stopenj vrtljajev Vpenjalo orodja ISO 40 Hod pinole 90 mm Hitrost podajanja 2-3000 mm/min Hitri pomik vzdolž in prečno 6000 m/min Hitri pomik Z-os 5000 m/min Razdalja med vretenom in mizo 450 mm Pomik mize 495 mm Navpična površina mize 300 x 450 mm Klodpfxjxv D U Is Adkjp Vpenjalna miza, fiksna 460 x 800 mm Maksimalna obremenitev 350 kp Dimenzije pribl. 3150 x 1800 x 2125 mm Teža s paletnim sistemom pribl. 2380 kg Teža stroja pribl. 2,4 t Vključno različna držala ISO 40 Navodila za uporabo na voljo

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Klsdpfow Hq Ifox Adkep Spindle Max. spindle speed: 15,000 rpm Tool Data Tool magazine: 46 stations Tool holder: ISO-B40 Travel Axes X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control unit: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D touch probe Note: The tool holders shown in the photos are included in the scope of delivery. However, the tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the sale. The drive for the head tilting axis is missing.