Mikron Vcp 600 nakup rabljenega (178)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Heidenhain TNC 114 Digital Readout and Infinitely Variable Feed Technical Data: >> Year of construction: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed in 3 axes from 1-750 mm/min >> Rapid traverse in 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight: approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout, Heidenhain TNC 114 >> Central lubrication >> Operating instructions, programming manual, electrical diagrams About the Machine: Rcodsw Ni Riepfx Aafeh For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain TNC 114 path control, meaning it can execute programmed travel distances in any one of its axes—X, Y, or Z—and automatically stop after reaching the set position. Up to four different reference points can be set. Dimension inputs can be made as either absolute or incremental values. The feed rate is infinitely variable from 0–750 mm/min and can be adjusted during operation; rapid traverse can be engaged at the press of a button. The spindle speed can be set in steps from 50 to 2240 rpm, but only when the machine is at a standstill. The vertical milling head is secured with three screws and can be removed or reattached within just 2 minutes. It is manually fixed and swung aside using the articulated arm visible on the left side of the machine. A key advantage of this machine is the generous travel distances in relation to its overall size: Z = 380 mm, X = 500 mm, and Y = 500 mm. Additionally, the machine features electronic protection for the vertical spindle. The machine has been mechanically and electrically tested. Take advantage of the opportunity to view and test this machine under power at our facility.

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Mikron WF2S universal milling machine with 3-axis Elesta-Visulesta digital readout. Fixed angle table, SK 40 spindle taper. Machine is in very good, ready-to-operate condition, from a research institute. Can be demonstrated under power by prior arrangement. Rcedpfx Aog Nw Rzoafeh

Stanje: rabljeno, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Travels: X-710, Y-500, Z-460 mm Rodsc Tt Hrjpfx Aafech Spindle speed: 31.5–3150 rpm Accessories: Swivel table, coolant system, various tool holders

Stanje: rabljeno, ACCESSORIES Rcedjuhbqpspfx Aafoh - Equipped with Automat type Zellio SR3 - Includes tilting loading magazine No. 11 and vibrator - Piece diameter: 2.50 to 12.5 [mm] - Piece length: 0.30 to 30 [mm]

Stanje: novo, Leto izdelave: 2025, Grabež za odpadne kovine, grabež za odpad, večprstni grabež za kovinski odpad Prostornina: 0,6 m³ Model: 5 zob Obložne plošče Hardox 450 Možnost rotacije Rcjdpfoxryrbex Aafjh

Stanje: dober (rabljeno), MIKRON - A 21 / 2 Gear Hobbing Machine Rjdpfxow D Dbyo Aafsch - Complete technical specifications available in the photos - Change gears included - Mitutoyo magnifier - Original user manual – COMPLETE - Many spare parts - Very well-maintained overall condition Dimensions: LxWxH 1.2x1x1.6 meters / Weight 1000 kg Subject to errors and typographical mistakes

Stanje: dober (rabljeno), Leto izdelave: 1996, potovalna razdalja osi X: 710 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, hitrost vretena (min.): 5 obr/min, največja hitrost vretena: 5.000 obr/min, For sale: Machining centre from Mikron, model UMS 710-900 The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical specifications: - X travel: 710 mm - Y travel: 630 mm - Z travel: 500 mm - CNC control: TNC 355 HEIDENHAIN - Table size: 1200 x 600 mm - Max. table load: 500 kg - Spindle taper: SK 40 with clamping groove - Spindle speed range: 5 - 5000 rpm - Spindle drive power: 11 kW - Feed rate: 0 - 10,000 mm/min - Rapid traverse: 10 m/min - Operating voltage: 400 V Rcodpfx Astt Acgsafjh - Total power requirement: 15 kW - Machine weight approx.: 5.0 t - Dimensions approx.: 2.40 x 3.40 x 2.30 m - Chip tray - No internal coolant supply (IKZ) - 44-position tool changer - Handwheel First fill with operating fluids upon request possible. If required and at additional cost, loading and transportation (throughout Europe) can be organised. Prices are subject to VAT. Viewing possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or contact details, please inquire.

Stanje: dober (rabljeno), Leto izdelave: 1995, Stroj je v dobrem delovnem stanju. Rcjdpfxjuzimnj Aafjh Krmilna enota TNC 426.

Stanje: pripravljen za uporabo (rabljen), Na voljo je pet starejših rezkalnih strojev za navoje Mikron: 3x hidravlični stroj za valjčno rezkanje navojev Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 in 1x stroj za kratko navojno rezkanje Mikron 106.01. Ogled na lokaciji je mogoč. Rjdpfxsw Sxyxe Aafoch

Stanje: rabljeno, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] - T-slots: 7 - Travel (X, Y, Z): 400, 400, 370 [mm] - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES Rcedsuhbxajpfx Aafeh - 3-axis HEIDENHAIN digital readout - Chip guard

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: MHB5202500000156, Prijemalo za odpad za Terex Fuchs, Sennebogen, Liebherr 5-kraki model Kapaciteta 500 litrov Redpfx Aaexryn Asfoch

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 1.889 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 860 mm, pomik osi Y: 560 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, Obdelovalni center s samo 1889 urami vretena! TEHNIČNI PODATKI Pomiki Pomik X-os: 860 mm Redsw Ngmujpfx Aafech Pomik Y-os: 560 mm Pomik Z-os: 600 mm Podatki o vretenu Maks. hitrost vrtenja vretena: 10.000 min⁻¹ PODROBNOSTI O STROJU Ure vretena: 1.889 h Ure vklopa: 42.782 h Število krmiljenih osi: 3 Model krmiljenja: HEIDENHAIN iTNC530

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm Rcodpfst Hw D Rjx Aafeh max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Spindle Max. spindle speed: 15,000 rpm Tool Data Tool magazine: 46 stations Tool holder: ISO-B40 Travel Axes X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Rcsdpfsw Hq Ifox Aafeh Table NC rotary tilting table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control unit: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D touch probe Note: The tool holders shown in the photos are included in the scope of delivery. However, the tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the sale. The drive for the head tilting axis is missing.

Stanje: rabljeno, Leto izdelave: 1986, obratovalne ure: 66.247 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, Stroj je v dobrem stanju in še vedno v obratovanju. Leto izdelave: 1986 Hodi: X 600 / Y/Z 500 Obratovalne ure: 66.247 h Opombe: - Cena NE vključuje dodatne opreme! Rcsdpfx Aaowccfhofjh - Odhod organizira kupec, s prevzemnega mesta. - Datum prevzema se določi po dogovoru s prodajalcem. - Brez garancije - Plačilo vnaprej (račun) ali gotovinsko ob prevzemu

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Z 500 mm Rsdpfxswx Rafs Aafsch 10.000 vrt/min

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, številka stroja/vozila: MHG5202500000125, Polip grabilec za odpad Redpfxexrymxe Aafoch Kapaciteta: 600 litrov Model: 5 krakov Bruto teža: 1.150 kg

Stanje: pripravljen za uporabo (rabljen), Spindle speed: 3,150 rpm, Travel path X/Y/Z: 710 mm / 500 mm / 500 mm, Number of spindle speeds: 21, Feed rate: 2,000 mm/min, Spindle taper: ISO40/M16, Distance from milling head to table: 559 mm, Table dimensions X/Y: 500 mm / 1,000 mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Dimensions X/Y/Z: approx. 2,700 mm / 2,300 mm / 2,200 mm, Weight: approx. 3,300 kg, Control: Heidenhain TNC 155. Documentation available. Rcedpfx Aaetuwk Uefsh

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm Rcjdpfxeu U Sabo Aafjh y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Pomik osi X: 1200 mm Pomik osi Y: 600 mm Pomik osi Z: 675 mm Hitrost vrtenja delovnega vretena: 30 - 8000 min⁻¹ Nosilec orodja: ISO B 40 Pomik X/Y/Z: 3000 mm/min Hitri pomik X,Y / Z: 24 / 20 m/min PODROBNOSTI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Rjdpsw Iqf Sofx Aafoch Krmilna napetost: 24 V DC Priključena moč: 16 kW Teža: 8000 kg

Stanje: dober (rabljeno), Leto izdelave: 2015, Stroj je v dobrem stanju, prikazani deli, ki so prikazani ročno, niso vključeni. X: 1025 mm Rcodpjwx N Nfofx Aafjh Y: 560 mm Z: 600 mm Heidenhain TNC 620, 16.000 vrt/min, HSK 63

Leto izdelave: 1988, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 710mm/500mm/460mm, table dimensions X/Y: 1000mm/500mm, max. table load: 500kg, tool holder: SK40, spindle speed: 4000rpm, machine dimensions X/Y/Z: approx. 2000mm/2600mm/2250mm, weight: approx. 3400kg, control system: Heidenhain TNC 355, operating hours: approx. 34,000h. Includes coolant system, complete work area enclosure, approx. 34x SK40 tool holders, carriage and shafts for gear hobbing. Documentation available. On-site inspection possible. Rcedpfsv Sct Ssx Aafeh

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Rcsdpfx Aot Hwxbsafjh Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Teile auf dem Tisch sind nicht enthalten. Mit Rot markiert. Rjdpfewxdyxex Aafjch

Stanje: pripravljen za uporabo (rabljen), Control: HEIDENHAIN TNC 150. Rodegtiaajpfx Aafech