Mikron Vcp 1000 nakup rabljenega (187)

Stanje: rabljeno, Inrush current limiter, soft starter, softstarter, starting current limiter, soft start choke - Manufacturer: varimax, soft start choke/three-phase reactor removed from CNC milling machine Mikron WF 51C/155 - Type: D 1515 S3 Hsdpskzpngjfx Ab Eefd - Current rating: 10 A - Dimensions: 180/90/H190 mm - Weight: 9.5 kg

Stanje: rabljeno, CNC control, operator panel, machining center operator panel, control unit, operator panel, operating unit - Manufacturer: Mikron, control unit - Type: TCD 22 - DIN 8659 - Circuit board: WW TCD 22 control unit 104.73.20.042 - Individual components: see photos - Dimensions: 480/130/H240 mm - Weight: 5 kg Hfedpfxoprb Dvj Ab Eed

Stanje: dober (rabljeno), Clamping table, angle plate, T-slot table, rotary table, milling machine table - Manufacturer: Mikron, milling machine table / T-slot table from CNC machining center UME 600 - Table surface: 530 x 900 mm - T-slots: slot width 14 mm, slot spacing 63 mm - Transport dimensions: 900/530/H390 mm - Weight: 248 kg Hfsdjrbm Udopfx Ab Eed

Stanje: dober (rabljeno), Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, operating unit, operator terminal, HMI panel, handheld terminal, manual control panel - Manufacturer: Mikron, handheld operating terminal from CNC milling machine Mikron UME 600 - Connection plug: see photos - Transport dimensions: 400/240/H95 mm - Weight: 1.1 kg Hodpfsrc Ikxjx Ab Eofd

Stanje: dober (rabljeno), PLC control, power module, LT module, I/O module, regenerative feedback module, CNC control, safety plug-in universal module, plug-in cards, circuit boards, control board, PCB Hjdporb E Ewsfx Ab Eofd -Manufacturer: Mattle Mikron, safety plug-in universal module PCB from Mikron UME 600 CNC milling machine -Safety plug-in module: Type SEMU TN 24VDC -PCB: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Stanje: zelo dobro (rabljeno), Mikron rezkarica za zobateške A33/0 – za modul 0,5 do 2,5 – redko uporabljena Proizvajalec: Mikron Tip: A33/0 – rezkarica za zobateške (vertikalna) Izvedba: Osnovni stroj z navadno rezkalno glavo Stanje: rabljeno, zelo dobro ohranjeno, stroj je bil redko v uporabi Barva: zelena Tehnični podatki Maks. premer obdelovanca: cca 80 mm Maks. dolžina rezkanja: cca 150 mm Razpon modula: cca 0,5 – 2,5 idealen za majhna zobata kolesa v območju modula 0,5 – 1,0 Glavni pogon: 3 kW Električni priključek: 3 x 380 V AC, 50 Hz Skupna priključna moč: cca 9,5 kVA Dimenzije in teža D x Š x V: cca 1.450 x 1.380 x 2.080 mm Hfjdpfex A D Izjx Ab Esd Teža: cca 2.200 kg Posebnosti Zelo primeren za izdelavo majhnih zobnikov (modul 0,5 – 1,0) Stroj redko v proizvodnji, zato majhna obraba Razpoložljivost / Servis Podrobne fotografije in video v delovanju na zahtevo Ponudba z vključenim ceno, pogoji dobave in dobavnim rokom je možna Predhodna prodaja in napake pridržane.

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 956.71.80.274, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 400 mm, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 400 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, The machine shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. It is sold together with a vise and includes a tool cabinet with the contents as shown. Additionally, it comes with 2 sets of ground parallels as well as approximately 80 milling cutters, all in usable condition (partially lightly used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum. Hfjdpfx Abownq Sgo Ejd

Leto izdelave: 1987, stanje: dober (rabljeno), Mikron WF2SA tool milling machine with 3-axis Heidenhain Aktiv digital readout. Fixed angle table, SK 40 spindle taper. In operational condition. The machine can be demonstrated under power by prior arrangement. Hsdpfx Aoqttt Tob Eofd

Stanje: zelo dobro (rabljeno), Control panel / keypad Heidenhain Mikron Type TE 355 A ID no. 255 015 02 Hjdpjlu A Tgofx Ab Eefd Serial no. 3787 956 L6

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, obratovalne ure: 3.665 h, Funkcionalnost: omejena funkcionalnost, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Naprodaj je visoko natančen mikro stroj za zobljanje zobnikov Mikron 102.05, izdelan v Švici, letnik izdelave okoli 1984, malo rabljen, na števcu 3665 delovnih ur. Priloženi številni dodatki. Cena je 12.500 EUR EXW. Hfodpfxsymfnls Ab Eod

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: 0144, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 17.716 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 675 mm, model krmilnika: Heidenhain iTNC 530, TEHNIČNI PODATKI X-pomik: 1.200 mm Y-pomik: 600 mm Z-pomik: 675 mm Delovna hitrost vretena: 30 - 8.000 vrt./min Vpenjalni sistem orodij: ISO B 40 Velikost mize: 1.220 x 620 mm T-utorji: 18 T-utorji: 5 x 18 mm Razdalja med T-utorji: 100 mm Obremenitev mize: 1.700 kg Krmilni sistem: Heidenhain iTNC 530 Pomik X/Y Z: 3.000 mm/min Hitri pomik X,Y / Z: 24 / 20 m/min PODATKI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Krmljna napetost: 24 V DC Priključna moč: 16 kW Teža: 8.000 kg Hfedpfsx Trpqjx Ab Eed Obratovalne ure Krmiljenje vklopljeno: 44.842 h Stroj vklopljen: 36.513 h Programski tek: 15.882 h Pogoni vklopljeni: 31.655 h Vreteno vklopljeno: 17.716 h

Stanje: dober (rabljeno), MIKRON UCP 600 VARIO je 5-osni obdelovalni center, zasnovan za visoko natančnost, preciznost in zanesljivost. Miza 320×320 mm; hodi X600 Y450 Z450; razdelitev C n x360°; rezkalna glava B -115/+30°. Orodni magazin za 30 mest; orodje: največji Ø 80 mm, dolžina 200 mm, masa 8 kg; vpenjalo HSK-A63. Vreteno brezstopenjsko 0–20.000 vrt/min, moč 30 kW, navor 91 Nm. Podajalna hitrost 15.000 mm/min, hitri pomik 22 m/min; priklop 3x400 V 50 Hz. Teža ~7.700 kg; mere D 6820׊ 4800×V 2540(2810) mm. Oprema: papirni filter, vodni hladilnik, transporter za odrezke, miza EROWA UPC, elektronski ročni kolo, svetilka, signalna luč. Osi 4+5 obnovljeni 2023. Dosega ozke tolerance; primeren za avtomobilsko, letalsko, medicinsko, urarsko in orodjarsko industrijo. Hfjdjxx U U Repfx Ab Eod

Stanje: zelo dobro (rabljeno), MIKRON HPM 800 U je 5-osni obdelovalni center za preciznost, visoko natančnost in zanesljivost. Miza 630×440 mm, 5 T-utorov, nosilnost 800 kg; hodi X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, razdalja 600 mm; 115 orodij, max premer 80 mm (160 prostih), dolžina 350 mm. 0–20000 min⁻¹; pomik 0–20000 mm/min; hitri pomik 45 m/min; pospešek 6 m/s²; pomična sila 6000 N; 3×400V 50Hz; 55 kW; teža ~15000 kg; mere 3505×3100×2980 mm. Oprema: visokotlačno hlajenje, papirnat filter, 2 paleti, merilna sonda za obdelovanec, laserski nadzor orodja, transporter za ostružke. Za ozke tolerance v avtomobilski, letalski, medicinski in urarski industriji. Hjdjxx U Nnspfx Ab Eefd

Stanje: rabljeno, MIKRON Multistar CX-24 / 1500 je rotacijski prenosni stroj visoke natančnosti, zasnovan za vrhunsko natančnost in zanesljivost. Zmogljivost: 24 postaj; največ 23 zgornjih, 22 spodnjih, 22 stranskih postaj; premer obdelovanca do 24 mm; proizvodna zmogljivost 70 kos/min (večstopenjsko 280 kos/min). Glavni podatki: hitrost vretena 500–32.000 obr/min; priključek 50 Hz, 3x 400 V; komprimirani zrak 6 bar; masa stroja približno 3500 kg; masa krmilne omare približno 1200 kg. Dosega tesne tolerance; tipične uporabe: avtomobilska, letalska, medicinska, urarska industrija in orodjarstvo. Hjdsxx U A Ujpfx Ab Ejfd

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2001, obratovalne ure: 3.260 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 730, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 685 mm, teža obdelovanca (maks.): 1.500 kg, največja hitrost vretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Working spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine slots: 46 Max. tool diameter (fully occupied): 80 mm Max. tool diameter (partially occupied): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feed Rates and Rapids Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Hfjdpfxoxxzqrj Ab Ejd Spindle hours: 3,260 h Machine on-hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space required (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will presumably be carried out on a truck with a 3,000 mm loading width.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Mikron / GF HPM 450 U WPC with Pallet Changer About the Machine: High-precision 5-axis simultaneous milling machine with 7-station pallet changer (WPC). Excellent condition, extensively equipped! Very few spindle hours! Technical Data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45 / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of magazine tool stations: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid traverse X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Equipment: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-station pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction unit - Tool blow-off device - Air blower on spindle slide - Air blast through spindle center - Internal coolant system 18 – 70 bar - Paper band filter unit - Chip conveyor - Spindle oil cooler Installation dimensions (L x W x H): 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg Inspection / test under power on site is available, of course. We are not your average machinery dealer – You will be advised by a CNC expert here! We would be happy to offer you transport, installation, commissioning, and training on the machine with our own technicians. Everything from one source: We, Baumgärtner CNC GmbH & Co.KG, are a specialist company focused on: Hsdpfx Absx Hx Rhs Ejfd - Service - Maintenance - Overhauling - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, to transport and installation, right through to commissioning and subsequent maintenance or repair work, you can count on us.

Stanje: dober (rabljeno), Leto izdelave: 2006, 1. TEHNIČNI PODATKI Delovno območje Hedpfx Abjx H Ntae Esfd X-os: 400 mm Y-os: 450 mm Z-os: 350 mm B-os: ±110 ° C-os: 360 ° Delovno vreteno Območje hitrosti: 100 - 42.000 min⁻¹ Nosilec orodja: HSK E 40 Moč vretena pri 40 % ED: 13 kW Moč vretena pri 100 % ED: 10 kW Navor pri 60 % ED: 4,25 Nm Navor pri 100 % ED: 3,2 Nm Mazanje: olje/zrak Pomik Hitri pomik: maks. 40 m/min B-os: 150 min⁻¹ C-os: 250 min⁻¹ Pospešek osi XYZ: maks. 1g (10 m/s²) B-os: 100 rad/s² C-os: 300 rad/s² Menjalec orodja: 68 mest Chip to chip: 12,5 s Čas menjave orodja: 10,0 s Delovna miza: 120 mm Maks. premer obdelovanca za 360° vrtenje: 230 mm Maks. višina obdelovanca: 350 mm Maks. teža obdelovanca: 25 kg Krmilnik: Heidenhain iTNC 530 Teža: 5500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm Hfedpfx Abexu Hkco Eed - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: dober (rabljeno), Transformer, trafo, converter, three-phase autotransformer, three-phase transformer Hfjdjkzpmuopfx Ab Esd -Manufacturer: Trasfor, transformer/trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see nameplate photo -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Stanje: zelo dobro (rabljeno), Merilnik kota, enkoder, rotacijski dajalnik, absolutni rotacijski dajalnik - Proizvajalec: Heidenhain, merilnik kota z lastnim ležajem, v originalni embalaži - Tip: RCN 619.5GS5-19B00 - Št. artikla: 249 003-19 - Količina: 1x merilni instrument na voljo - Cena: na kos Hodpjqrwxajfx Ab Ejfd - Dimenzije škatle: 180/140/V90 mm - Teža: 1,0 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 530 i, največja hitrost vrtenja: 10.000 obr/min, število mest v zalogovniku orodij: 24, Obdelovalni center MIKRON VCE600PRO z pomiki po 3+2 oseh X 600 Y 450 Z 540 mm, SK40 s 10.000 obr/min in ATC za 24 orodij. Odlično stanje. Hfsdsqi Ufxopfx Ab Eod

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, številka stroja/vozila: 5.45.25.06, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Rok plačila za stroj je do 20.11.2025! Vsaka oddaja ponudbe zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Premiki: X-os: 900 mm Y-os: 630 mm Z-os: 500 mm Območje obratov navpično in vodoravno: 5–5.000 obr/min Vpenjalo za orodje: SK 40/DIN 69871 Teža orodja: maks. 12 kg Premer orodja: maks. 200 mm Vpenjalna površina kotne mize: 1.200 x 600 mm Maksimalna teža obdelovanca: 500 kg Hjdpfx Abexnk Hbj Ejfd PODROBNOSTI O STROJU Krmilje: HEIDENHAIN TNC 407 Dimenzije (D x Š x V): 3.500 x 2.900 x 2.200 mm Teža: 4.100 kg Prostornina hladilne tekočine: 150 l OPREMA Tehnična dokumentacija Opomba: Transport poteka s standardnim tovornjakom.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 956.71.80.288, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, model krmilnika: HEIDENHAIN TNC 150, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj je na dražbi zaradi prenehanja poslovanja podjetja. Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Pomik po X-osi: pribl. 300 mm Pomik po Y-osi: pribl. 300 mm Pomik po Z-osi: pribl. 300 mm Orodni vpenjalni stožec: SK 40 Dimenzije mize: 1.000 x 500 mm, s 7 utori PODROBNOSTI O STROJU Krmiljenje: HEIDENHAIN TNC 150 Hedpfxexqg Ito Ab Eefd Električni podatki Obratovalna napetost: 380 V Frekvenca: 50 Hz Nazivni tok: 25 A Priključna moč: 10,5 kW Mere & teža Mere (D x Š x V): 2.500 x 2.400 x 2.200 mm Teža: 2.000 kg OPREMA Dokumentacija Vpenjalne glave Set končnih mer

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Hedpfot Hw D Rjx Ab Eefd Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Hfedpfeu U Sabjx Ab Eed Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!