Mikron Ucp 1350 nakup rabljenega (187)

Stanje: rabljeno, Inrush current limiter, soft starter, softstarter, starting current limiter, soft start choke - Manufacturer: varimax, soft start choke/three-phase reactor removed from CNC milling machine Mikron WF 51C/155 Kwjdekzpngepfx Adkow - Type: D 1515 S3 - Current rating: 10 A - Dimensions: 180/90/H190 mm - Weight: 9.5 kg

Stanje: rabljeno, CNC control, operator panel, machining center operator panel, control unit, operator panel, operating unit - Manufacturer: Mikron, control unit - Type: TCD 22 - DIN 8659 - Circuit board: WW TCD 22 control unit 104.73.20.042 - Individual components: see photos - Dimensions: 480/130/H240 mm - Weight: 5 kg Kwjdpfx Aeprb Dvodkew

Stanje: dober (rabljeno), Clamping table, angle plate, T-slot table, rotary table, milling machine table - Manufacturer: Mikron, milling machine table / T-slot table from CNC machining center UME 600 - Table surface: 530 x 900 mm - T-slots: slot width 14 mm, slot spacing 63 mm - Transport dimensions: 900/530/H390 mm Kwjdpfxorbm Ude Adkew - Weight: 248 kg

Stanje: dober (rabljeno), Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, operating unit, operator terminal, HMI panel, handheld terminal, manual control panel - Manufacturer: Mikron, handheld operating terminal from CNC milling machine Mikron UME 600 - Connection plug: see photos - Transport dimensions: 400/240/H95 mm - Weight: 1.1 kg Kwedperc Ikxsfx Adkew

Stanje: dober (rabljeno), PLC control, power module, LT module, I/O module, regenerative feedback module, CNC control, safety plug-in universal module, plug-in cards, circuit boards, control board, PCB Kjdpfxerb E Ewo Adkeww -Manufacturer: Mattle Mikron, safety plug-in universal module PCB from Mikron UME 600 CNC milling machine -Safety plug-in module: Type SEMU TN 24VDC -PCB: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 956.71.80.274, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 400 mm, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 400 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, The machine shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. It is sold together with a vise and includes a tool cabinet with the contents as shown. Additionally, it comes with 2 sets of ground parallels as well as approximately 80 milling cutters, all in usable condition (partially lightly used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum. Kwedpfx Aewnq Sgodkjw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1073098273, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 450 mm, model krmilnika: HEIDENHAIN TNC 426, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04.12.2025! Placing a bid constitutes a binding commitment to collect the machine on time between 10.12.2025 and 12.12.2025! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 450 mm Feedrate in XYZ: 3,000 rpm Rapid traverse: max. 22 m/min Max. recommended working feed: 15 m/min Spindle speed: 100 – 18,000 rpm Tool holder: HSK-63 A Kedpjxvp Iyjfx Adkjww Tool change time: approx. 5 s Chip-to-chip time: approx. 7 s Tool diameter: Ø 90 mm fully loaded / Ø 110 mm partially loaded Tool length: 250 mm without taper Tool weight: max. 6 kg Table size: 850 x 530 mm T-slots: 6 x 14 H12, reference slot 14 H7 in the center of the table Slot spacing: 63 mm Table load: max. 400 kg MACHINE DETAILS Control system: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Connection: 40 kW Rated current: 80 A Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,300 x 2,800 mm Weight: 6,800 kg EQUIPMENT 30-position tool changer

Leto izdelave: 1987, stanje: dober (rabljeno), Mikron WF2SA tool milling machine with 3-axis Heidenhain Aktiv digital readout. Fixed angle table, SK 40 spindle taper. In operational condition. The machine can be demonstrated under power by prior arrangement. Kwedoqttt Tepfx Adkow

Stanje: zelo dobro (rabljeno), Control panel / keypad Heidenhain Mikron Type TE 355 A ID no. 255 015 02 Kwsdpfolu A Tgox Adkow Serial no. 3787 956 L6

Stanje: zelo dobro (rabljeno), MIKRON HPM 800 U je 5-osni obdelovalni center za preciznost, visoko natančnost in zanesljivost. Miza 630×440 mm, 5 T-utorov, nosilnost 800 kg; hodi X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, razdalja 600 mm; 115 orodij, max premer 80 mm (160 prostih), dolžina 350 mm. 0–20000 min⁻¹; pomik 0–20000 mm/min; hitri pomik 45 m/min; pospešek 6 m/s²; pomična sila 6000 N; 3×400V 50Hz; 55 kW; teža ~15000 kg; mere 3505×3100×2980 mm. Oprema: visokotlačno hlajenje, papirnat filter, 2 paleti, merilna sonda za obdelovanec, laserski nadzor orodja, transporter za ostružke. Za ozke tolerance v avtomobilski, letalski, medicinski in urarski industriji. Kodjxx U Nnopfx Adkeww

Stanje: rabljeno, MIKRON Multistar CX-24 / 1500 je rotacijski prenosni stroj visoke natančnosti, zasnovan za vrhunsko natančnost in zanesljivost. Zmogljivost: 24 postaj; največ 23 zgornjih, 22 spodnjih, 22 stranskih postaj; premer obdelovanca do 24 mm; proizvodna zmogljivost 70 kos/min (večstopenjsko 280 kos/min). Glavni podatki: hitrost vretena 500–32.000 obr/min; priključek 50 Hz, 3x 400 V; komprimirani zrak 6 bar; masa stroja približno 3500 kg; masa krmilne omare približno 1200 kg. Dosega tesne tolerance; tipične uporabe: avtomobilska, letalska, medicinska, urarska industrija in orodjarstvo. Kedjxx U A Uepfx Adkeww

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: 0144, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 17.716 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 675 mm, model krmilnika: Heidenhain iTNC 530, TEHNIČNI PODATKI X-pomik: 1.200 mm Y-pomik: 600 mm Z-pomik: 675 mm Kwjdpfxex Trpqo Adksw Delovna hitrost vretena: 30 - 8.000 vrt./min Vpenjalni sistem orodij: ISO B 40 Velikost mize: 1.220 x 620 mm T-utorji: 18 T-utorji: 5 x 18 mm Razdalja med T-utorji: 100 mm Obremenitev mize: 1.700 kg Krmilni sistem: Heidenhain iTNC 530 Pomik X/Y Z: 3.000 mm/min Hitri pomik X,Y / Z: 24 / 20 m/min PODATKI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Krmljna napetost: 24 V DC Priključna moč: 16 kW Teža: 8.000 kg Obratovalne ure Krmiljenje vklopljeno: 44.842 h Stroj vklopljen: 36.513 h Programski tek: 15.882 h Pogoni vklopljeni: 31.655 h Vreteno vklopljeno: 17.716 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Mikron / GF HPM 450 U WPC with Pallet Changer About the Machine: High-precision 5-axis simultaneous milling machine with 7-station pallet changer (WPC). Excellent condition, extensively equipped! Very few spindle hours! Technical Data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45 / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of magazine tool stations: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid traverse X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² Kwodpfox Hx Rhsx Adkjw - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Equipment: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-station pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction unit - Tool blow-off device - Air blower on spindle slide - Air blast through spindle center - Internal coolant system 18 – 70 bar - Paper band filter unit - Chip conveyor - Spindle oil cooler Installation dimensions (L x W x H): 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg Inspection / test under power on site is available, of course. We are not your average machinery dealer – You will be advised by a CNC expert here! We would be happy to offer you transport, installation, commissioning, and training on the machine with our own technicians. Everything from one source: We, Baumgärtner CNC GmbH & Co.KG, are a specialist company focused on: - Service - Maintenance - Overhauling - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, to transport and installation, right through to commissioning and subsequent maintenance or repair work, you can count on us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, obratovalne ure: 3.665 h, Funkcionalnost: omejena funkcionalnost, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Naprodaj je visoko natančen mikro stroj za zobljanje zobnikov Mikron 102.05, izdelan v Švici, letnik izdelave okoli 1984, malo rabljen, na števcu 3665 delovnih ur. Priloženi številni dodatki. Cena je 12.500 EUR EXW. Kjdpfx Asymfnlodkoww

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: Kwodpfsxu Hkcex Adkew - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. Kwedpfst Hw D Rjx Adksw The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Kwjdpfxeu U Sabj Adkew Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Ksdpfst Hwxbjx Adkeww Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Transformer, trafo, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer/trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 Kwsdpfx Adokzpmujkjw -Type: TNM1m2k5/E -Technical data: see nameplate photo -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Stanje: dober (rabljeno), Leto izdelave: 2001,

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Ročno prikazani deli niso priloženi. SK 40, 24 mest za orodja v menjalcu orodij. Ksdpfx Aowk Nm Iodkoww 10.000 min⁻¹

Stanje: dober (rabljeno), Teile auf dem Tisch sind nicht enthalten. Mit Rot markiert. Kodpfjwxdyxex Adkjww

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Z 500 mm 10.000 vrt/min Kedpfx Aewx Rafjdkjww

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, številka stroja/vozila: 5.45.25.06, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Rok plačila za stroj je do 20.11.2025! Vsaka oddaja ponudbe zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Premiki: X-os: 900 mm Y-os: 630 mm Z-os: 500 mm Območje obratov navpično in vodoravno: 5–5.000 obr/min Vpenjalo za orodje: SK 40/DIN 69871 Teža orodja: maks. 12 kg Premer orodja: maks. 200 mm Vpenjalna površina kotne mize: 1.200 x 600 mm Kwedpfoxnk Hbjx Adkew Maksimalna teža obdelovanca: 500 kg PODROBNOSTI O STROJU Krmilje: HEIDENHAIN TNC 407 Dimenzije (D x Š x V): 3.500 x 2.900 x 2.200 mm Teža: 4.100 kg Prostornina hladilne tekočine: 150 l OPREMA Tehnična dokumentacija Opomba: Transport poteka s standardnim tovornjakom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Kwedpfxowy I Tls Adkow Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.