Mikron 102 nakup rabljenega (183)

Stanje: zelo dobro (rabljeno), MIKRON HPM 800 U je 5-osni obdelovalni center za preciznost, visoko natančnost in zanesljivost. Miza 630×440 mm, 5 T-utorov, nosilnost 800 kg; hodi X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, razdalja 600 mm; 115 orodij, max premer 80 mm (160 prostih), dolžina 350 mm. 0–20000 min⁻¹; pomik 0–20000 mm/min; hitri pomik 45 m/min; pospešek 6 m/s²; pomična sila 6000 N; 3×400V 50Hz; 55 kW; teža ~15000 kg; mere 3505×3100×2980 mm. Oprema: visokotlačno hlajenje, papirnat filter, 2 paleti, merilna sonda za obdelovanec, laserski nadzor orodja, transporter za ostružke. Za ozke tolerance v avtomobilski, letalski, medicinski in urarski industriji. Lodpsxx U Nnofx Adkeri

Stanje: rabljeno, MIKRON Multistar CX-24 / 1500 je rotacijski prenosni stroj visoke natančnosti, zasnovan za vrhunsko natančnost in zanesljivost. Zmogljivost: 24 postaj; največ 23 zgornjih, 22 spodnjih, 22 stranskih postaj; premer obdelovanca do 24 mm; proizvodna zmogljivost 70 kos/min (večstopenjsko 280 kos/min). Glavni podatki: hitrost vretena 500–32.000 obr/min; priključek 50 Hz, 3x 400 V; komprimirani zrak 6 bar; masa stroja približno 3500 kg; masa krmilne omare približno 1200 kg. Dosega tesne tolerance; tipične uporabe: avtomobilska, letalska, medicinska, urarska industrija in orodjarstvo. Lrsdoxx U A Uepfx Adksi

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2001, obratovalne ure: 3.260 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 730, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 685 mm, teža obdelovanca (maks.): 1.500 kg, največja hitrost vretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Lrjdpexxzqrofx Adkoi Z-axis travel (horizontal): 870 mm Spindle Working spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine slots: 46 Max. tool diameter (fully occupied): 80 mm Max. tool diameter (partially occupied): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feed Rates and Rapids Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space required (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will presumably be carried out on a truck with a 3,000 mm loading width.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! Ledoxxzpujpfx Adkeri Bidding obligates the successful bidder to collect the item within the specified period between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 slots Tool holder: ISO-B40 Travel Distances Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 600 mm Table NC rotary-swivel table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped swivel axis): 10,000 N Rotational speed of rotary axis: 12 rpm Swivel Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotational speed of rotary axis: 4 rpm Controller: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders shown in the pictures are included in the scope of delivery. The tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the sale or delivery. The drive for the head swivel axis is missing.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, številka stroja/vozila: 0144, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 17.716 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 600 mm, pomik po osi Z: 675 mm, model krmilnika: Heidenhain iTNC 530, TEHNIČNI PODATKI X-pomik: 1.200 mm Y-pomik: 600 mm Z-pomik: 675 mm Delovna hitrost vretena: 30 - 8.000 vrt./min Vpenjalni sistem orodij: ISO B 40 Lredpex Trpqsfx Adksi Velikost mize: 1.220 x 620 mm T-utorji: 18 T-utorji: 5 x 18 mm Razdalja med T-utorji: 100 mm Obremenitev mize: 1.700 kg Krmilni sistem: Heidenhain iTNC 530 Pomik X/Y Z: 3.000 mm/min Hitri pomik X,Y / Z: 24 / 20 m/min PODATKI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Krmljna napetost: 24 V DC Priključna moč: 16 kW Teža: 8.000 kg Obratovalne ure Krmiljenje vklopljeno: 44.842 h Stroj vklopljen: 36.513 h Programski tek: 15.882 h Pogoni vklopljeni: 31.655 h Vreteno vklopljeno: 17.716 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Mikron / GF HPM 450 U WPC with Pallet Changer About the Machine: High-precision 5-axis simultaneous milling machine with 7-station pallet changer (WPC). Excellent condition, extensively equipped! Very few spindle hours! Technical Data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45 / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of magazine tool stations: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid traverse X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Equipment: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-station pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction unit - Tool blow-off device - Air blower on spindle slide - Air blast through spindle center - Internal coolant system 18 – 70 bar - Paper band filter unit - Chip conveyor - Spindle oil cooler Installation dimensions (L x W x H): 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg Inspection / test under power on site is available, of course. We are not your average machinery dealer – You will be advised by a CNC expert here! We would be happy to offer you transport, installation, commissioning, and training on the machine with our own technicians. Everything from one source: We, Baumgärtner CNC GmbH & Co.KG, are a specialist company focused on: - Service - Maintenance - Overhauling - Automation Ledpfxjx Hx Rhj Adkori of DMG machines and other well-known manufacturers. We support you! From machine purchase, to transport and installation, right through to commissioning and subsequent maintenance or repair work, you can count on us.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Lredpfxjxu Hkcj Adkoi Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Lrodpjt Hw D Refx Adkji Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Ledpfxju U Sabs Adkeri Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Lrjdpfot Hwxbsx Adkoi Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Leto izdelave: 2001,

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, Shown spare parts by hand are not included. Pallet changer EROWA is not included. Lodem Dtnrepfx Adksri

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v dobrem stanju, Ročno prikazani deli niso priloženi. Ljdpfswk Nm Iox Adksri SK 40, 24 mest za orodja v menjalcu orodij. 10.000 min⁻¹

Stanje: dober (rabljeno), Teile auf dem Tisch sind nicht enthalten. Mit Rot markiert. Ljdpfewxdyxox Adkeri

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Z 500 mm Lodowx Rafspfx Adkori 10.000 vrt/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Lodpfswy I Tlex Adkjri Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, številka stroja/vozila: 5.45.25.06, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Rok plačila za stroj je do 20.11.2025! Vsaka oddaja ponudbe zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Premiki: X-os: 900 mm Y-os: 630 mm Z-os: 500 mm Lsdpfx Adexnk Hbokeri Območje obratov navpično in vodoravno: 5–5.000 obr/min Vpenjalo za orodje: SK 40/DIN 69871 Teža orodja: maks. 12 kg Premer orodja: maks. 200 mm Vpenjalna površina kotne mize: 1.200 x 600 mm Maksimalna teža obdelovanca: 500 kg PODROBNOSTI O STROJU Krmilje: HEIDENHAIN TNC 407 Dimenzije (D x Š x V): 3.500 x 2.900 x 2.200 mm Teža: 4.100 kg Prostornina hladilne tekočine: 150 l OPREMA Tehnična dokumentacija Opomba: Transport poteka s standardnim tovornjakom.

Stanje: dober (rabljeno), Transformer, trafo, converter, three-phase autotransformer, three-phase transformer Lrsdpfxjkzpmus Adkji -Manufacturer: Trasfor, transformer/trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see nameplate photo -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained transfer machine / rotary indexing machine MIKRON MULTISTAR CX 24 Machine can be inspected under power Part setup possible without issue. with MITSUBISHI AACPU-S1 control unit – Machine year 1996 – Detailed technical data as per attachment – Machine can be inspected in operation (under chip load). Modification – Installation – Setup – Application support can be offered. Pricing: ex site, unpacked, uninsured. Delivery time: immediately – subject to prior sale. Technical data non-binding – subject to error. Payment: As customary for used machines, strictly net before collection. Lredpfet I T N Eex Adkei

Stanje: zelo dobro (rabljeno), Merilnik kota, enkoder, rotacijski dajalnik, absolutni rotacijski dajalnik Lrodpfoqrwxajx Adksi - Proizvajalec: Heidenhain, merilnik kota z lastnim ležajem, v originalni embalaži - Tip: RCN 619.5GS5-19B00 - Št. artikla: 249 003-19 - Količina: 1x merilni instrument na voljo - Cena: na kos - Dimenzije škatle: 180/140/V90 mm - Teža: 1,0 kg

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 956.71.80.288, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, model krmilnika: HEIDENHAIN TNC 150, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Lredexqg Itspfx Adkji Stroj je na dražbi zaradi prenehanja poslovanja podjetja. Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Pomik po X-osi: pribl. 300 mm Pomik po Y-osi: pribl. 300 mm Pomik po Z-osi: pribl. 300 mm Orodni vpenjalni stožec: SK 40 Dimenzije mize: 1.000 x 500 mm, s 7 utori PODROBNOSTI O STROJU Krmiljenje: HEIDENHAIN TNC 150 Električni podatki Obratovalna napetost: 380 V Frekvenca: 50 Hz Nazivni tok: 25 A Priključna moč: 10,5 kW Mere & teža Mere (D x Š x V): 2.500 x 2.400 x 2.200 mm Teža: 2.000 kg OPREMA Dokumentacija Vpenjalne glave Set končnih mer

Stanje: dober (rabljeno), Leto izdelave: 2006, 1. TEHNIČNI PODATKI Delovno območje X-os: 400 mm Y-os: 450 mm Z-os: 350 mm B-os: ±110 ° C-os: 360 ° Lsdpfx Asx H Ntasdkjri Delovno vreteno Območje hitrosti: 100 - 42.000 min⁻¹ Nosilec orodja: HSK E 40 Moč vretena pri 40 % ED: 13 kW Moč vretena pri 100 % ED: 10 kW Navor pri 60 % ED: 4,25 Nm Navor pri 100 % ED: 3,2 Nm Mazanje: olje/zrak Pomik Hitri pomik: maks. 40 m/min B-os: 150 min⁻¹ C-os: 250 min⁻¹ Pospešek osi XYZ: maks. 1g (10 m/s²) B-os: 100 rad/s² C-os: 300 rad/s² Menjalec orodja: 68 mest Chip to chip: 12,5 s Čas menjave orodja: 10,0 s Delovna miza: 120 mm Maks. premer obdelovanca za 360° vrtenje: 230 mm Maks. višina obdelovanca: 350 mm Maks. teža obdelovanca: 25 kg Krmilnik: Heidenhain iTNC 530 Teža: 5500 kg

Stanje: zelo dobro (rabljeno), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Lsdpfx Adslnfggsksri Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor Torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X axis): Automatic: 400 mm Cross travel of the clamping table (Y axis): Automatic: 400 mm Vertical travel of the clamping table (Z axis): Automatic: 385 mm No guarantee for the correctness, completeness or up-to-dateness of the information provided.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), MIKRON HSM 400 U High-Speed Machining Center The exact scope of supply can be seen in the photo gallery. Included, among others: touch probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, band filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Work Area X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: ±110° C-axis: 360° Spindle Lrodpfx Adsigrf Ioksi Speed range: 100 – 42,000 rpm Tool holder: HSK E 40 Spindle power at 40% duty cycle: 13 kW Spindle power at 100% duty cycle: 10 kW Torque at 60% duty cycle: 4.25 Nm Torque at 100% duty cycle: 3.2 Nm Lubrication: oil/air Feed Rapid traverse speed: max. 40 m/min B-axis: 150 rpm C-axis: 250 rpm Axis acceleration, XYZ: max. 1g (10 m/s²) B-axis: 100 rad/s² C-axis: 300 rad/s² Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Worktable: 120 mm Max. workpiece diameter (for full 360° rotation): 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control system: Heidenhain iTNC 530 Weight: 5,500 kg No guarantee is given for the correctness, completeness or currentness of the information provided.

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm y-axis travel: 630 mm z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Lodpfxolu N Hie Adkjri Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup.