Mep Shark nakup rabljenega (146)

Stanje: novo, Leto izdelave: 2024, * Manual cutting cycle * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via compensation spring * Robust, torsion-resistant and low-vibration saw frame made of cast steel * Large, easily adjustable and mounted rotary table, center-axis located and indexed at 0° / 45° / 60°, with internal table clamping for intermediate angles * Quick-adjusting vice * Carbide band guides for highest cutting precision * Hydraulic unit for saw blade tensioning and monitoring, with display on manometer * Clearly arranged control panel with all operating elements * Machine base, coolant tray, coolant pump, and swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw blade dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm * Cutting capacity at 60 degrees: square 80 mm * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 mm / right mm * Cutting capacity at 45 degrees: square left 200 mm / right 170 mm * Machine weight approx. 0.4 t Nedpfx Asftmxvolteld * Space requirement approx. 1.8 x 1.3 x 1.8 m

Stanje: novo, Cutting diameter: 330 mm Cutting capacity at 90 degrees (flat): 510 x 320 mm Cutting capacity at 90 degrees (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Nledpfx Aefg E Ibelted Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a blade size of 4640 x 34 x 1.1 mm for cutting pipes, profiles, and beams up to a maximum cutting area of 510 x 320 mm at 0°. The control console on a swiveling arm allows for convenient and safe operation from any position. Electronic inverter for stepless regulation of blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring engraved precise fine scaling, easily adjustable and supported.

Stanje: dober (rabljeno), Leto izdelave: 2002, Samodejna tračna žaga MEP Model: Shark 320 AXI Leto: 2002 Kapaciteta za okrogle profile: 260 mm Kapaciteta pri 45 / 60 stopinjah: 230 mm / 150 mm Nedeyvzvxopfx Altold Kapaciteta za kvadratne profile: 320 x 220 mm Hitrost traku: 40 - 80 m/min.

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: omejena funkcionalnost, premer žaginega lista: 370 mm, največja višina reza: 230 mm, dolžina podajanja os X: 1.000 mm, skupna višina: 1.900 mm, skupna širina: 1.750 mm, skupna masa: 1.060 kg, premer rezanja: 100 mm, dolžina rezanja (maks.): 99.999 mm, delovna višina: 1.000 mm, Stroj lahko nagnete za 45°. Nsdpfx Aeznipheltsld Dodatne tehnične podrobnosti so navedene v navodilu za uporabo in vzdrževanje, ki ga boste prejeli ob nakupu. Če imate dodatna vprašanja, nas lahko kontaktirate po telefonu ali e-pošti. S prijaznimi pozdravi, Weber Geländersysteme

Stanje: rabljeno, MEP Syntax Line 25 Avtomatski center za obdelavo armaturnih palic, rabljeni stroj Proizvajalec MEP S.p.A. (Izdelano v Italiji) Model Nljdjzg Uv Dopfx Altjd Syntax Line 25 Funkcije stroja Avtomatsko ravnanje iz koluta Hidravlično rezanje CNC krmiljeno dvosmerno krivljenje Zmogljivost obdelave (armaturna jekla iz koluta) Enožična obdelava: Ø8 mm do Ø25 mm Dvožična obdelava: Simultano obdelovanje 2 palic od Ø8 mm do Ø16 mm Skladiščenje materiala Kapaciteta skladiščenja: do 14 m³ Ročno nakladanje Sprejemni pladenj: 12 × 2,5 m Skupne dimenzije Širina: 17.400 mm Globina: 2.400 mm Višina: 1.600 mm Stanje Vgrajeni monitor ne deluje. Stroj je opremljen z video izhodom, ki omogoča priklop zunanjega monitorja za delovanje.

Stanje: rabljeno, MEP-OMES stroj za rezanje konstrukcijskega jekla, hidravlični rezalni stroj, rabljeni stroj Proizvajalec MEP SpA (OMES) – Italija Model Superflex 40/2/12 (z 12-metrskim merilnim in dovajalnim valjčnim transporterjem) Skupne dimenzije Širina: 13.900 mm Globina: 2.750 mm Višina: 2.400 mm Nlsdpfxjzgh Dze Alted Tehnične specifikacije Kapaciteta rezanja: Ø 8 mm – Ø 40 mm Dolžina reza: najmanj 600 mm – največ 12.000 mm Pogonski sistem: težko-delojoč hidravlični rezalni sistem Natančnost reza: ±1 mm/m z elektronskim programiranjem in protizdrsnim dovajalnim sistemom Ravnanje z materialom: linearen transport materiala z integriranim valjčnim transporterjem in sortirno mizo

Stanje: rabljeno, obratovalne ure: 16.158 h, Stroj za upogibanje armature, MEP FOCUS 12, rabljeni stroj Proizvajalec: MEP S.p.A., Italija Model: FOCUS 12 Leto izdelave: 2006 Skupne dimenzije: MEP upogibni stroj: Širina: 3660 mm Globina: 1620 mm Višina: 2350 mm Razvijalec: Širina: 4820 mm Globina: 1980 mm Višina: 1460 mm Upogibna zmogljivost: 6–12 mm Dodatki: 5 kosov kolutov žice 1 kos 8 mm upogibno orodje Programabilnost: Ena glavnih prednosti serije »Focus« je nastavitev upogibnih kotov prek elektronske nadzorne plošče. Ročno nastavljanje mehanskih stoperjev kot pri starejših madžarskih strojih ni potrebno. To bistveno pospeši proizvodnjo, na primer, ko je treba upogniti 100 enakih stremencev. Nledpfxezaq Dlo Alted Krmilni sistem ohrani programe tudi, če je stroj več mesecev ali celo let brez napajanja. Programska oprema deluje na namenskem računalniku. MEP zagotavlja popolno servisno in tehnično podporo za vse svoje stroje, ne glede na leto izdelave.

Stanje: rabljeno, Leto izdelave: 2021, Saw blade diameter 370x32x3 mm 4 speeds 15-150 rpm Vice 190 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 110 mm Cutting range at 90 degrees: flat 180x100 mm Cutting range at 60 degrees left: round 115 mm Cutting range at 60 degrees left: square 90 mm Cutting range at 60 degrees left: flat 90x90 mm Cutting range at 45 degrees left: round 115 mm Cutting range at 45 degrees left: square 100 mm Cutting range at 45 degrees left: flat 120x100 mm Cutting range at 45 degrees right: round 115 mm Cutting range at 45 degrees right: square 100 mm Cutting range at 45 degrees right: flat 120x100 mm Total power requirement 5.5 kW Weight 615 kg Machine dimensions 1400x1400x2000 mm Electropneumatic – Semi-automatic vertical circular saw with microprocessor control for miter cuts from 60° left to 45° right. Standard Equipment: - Saw head glides on double linear ball guides - Three-stage gearbox - Variable speed control 15-150 rpm - Vice opening 190 mm - Saw head stroke programmable directly from the control panel, allowing adjustment to the cutting material - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 370x32x3 for solid and profile material - Vice with counter-clamping device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for repeated cuts of equal length - Material support arm, also with connection option for roller conveyor / loading side - Machine is designed for transport by pallet truck - Incl. tools and operating manual Electrical Equipment: - Control panel - Labeled cable connections Nodpfeyvvpaex Altold - Indicator light for operational readiness - Main safety switch - LED check panel on control console for monitoring machine functions - Emergency stop button - Speed selector switch - Thermomagnetic protection - Undervoltage release - Switch handle with IP 55 protection class - Low-voltage system 24 Volt - Electrical coolant system for saw blade lubrication and cooling (micro-spray system can be added) - Motor 5.5 kW - 400 Volt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, POLAVTOMATSKA DISKASTA ŽAGA MEP TIGER 352 SX EVO - Vrtenje rezila s 4 hitrostmi (15/30/45/90 obr./min) Njdpfoxdr Rtox Altsld - Zasukalna miza nameščena na centralnem zatiču in aksialnem ležaju - Pomik rezalne glave po dvojnih linearnih vodilih - Mehanske mejne omejitve pri -45°, 0°, +45° in +60° z blokirno napravo v vseh kotih - Uporabniški vmesnik z zaslonom

Leto izdelave: 2002, stanje: dober (rabljeno), MEP CONDOR 90 CNC MR automatic disc saw for aluminium profiles, with controlled feed. Used, in excellent condition. Nlodjikztpopfx Altjd

Stanje: rabljeno, Leto izdelave: 2017, Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 mm Cutting capacity at 90°: flat 180x70 mm Cutting capacity at 45° left: round 110 mm Cutting capacity at 45° left: square 95 mm Cutting capacity at 45° left: flat 135x60 mm Cutting capacity at 45° right: round 120 mm Cutting capacity at 45° right: square 100 mm Cutting capacity at 45° right: flat 135x60 mm Vice opening 180 mm Saw blade dimensions 350x32x3.4 mm Speed 1700/3400 rpm Machine weight approx. 600 kg Semi-automatic mitre saw with semi-automatic operation for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left; saw head swivels 0°-45° to the left. Control is via multi-microprocessor system. Two NC-controlled axes enable up to 1,000 different cutting programs — each with individual quantity and length — to be programmed for the same material. - New centralized control console on an articulated arm for easy operation from any working position. Emergency stop button accessible at all times. - Fieldbus communication system with dual microprocessor and serial port. - 20-character x 4-line display showing the following technical parameters: Number of programmed and executed cuts, saw blade thickness, feed length, cutting time, ammeter, as well as more than 100 diagnostic messages and warnings. - New – Display and logging of alarm and error messages with incident review capability. New – Material feed of 600 mm with cutting motor and ball screw mounted on opposing ball bearings. - New – Low voltage control panel: polyester membrane keyboard with thermoformed, raised pushbuttons and actuation signal. - Programmable saw bow stroke directly from the control panel for adaptation to the material being cut. - Ball-bearing rotary table ensures smooth and precise rotation. Nlsdpfxey Ruvbe Alted - Clamping system with two vises located at the end faces, which can be positioned freely along the longitudinal axis of the workpiece. - Adjustable mechanical stops for quick positioning of the saw head at 0 and 45 degrees right and left angles.

Stanje: pripravljen za uporabo (rabljen), Mep Cobra 350 kovinska krožna žaga – kovinska krožna žaga, hladna krožna žaga Nsdpoyx Az Isfx Altsld Premer žaginega lista: 350 mm Maksimalna zmogljivost rezanja: 180 mm x 70 mm Zasukljivo rezalno glavo: 45° levo in desno Valjčni transporter Odsesavanje Minimalno mazanje Hitrost vrtenja: 1700/3400 obr/min Vabimo vas na ogled stroja. Na vašo željo vam lahko organiziramo ugoden prevoz! Prejmete ustrezen račun. Za tuje stranke je možen tudi neto račun – pogoj je veljavna ID DDV. Pridržujemo si pravico do predhodne prodaje. Obiščite našo trgovino in si oglejte tudi naše druge ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih imetnikov in služijo zgolj za identifikacijo in opis izdelkov. Možna so odstopanja v tehničnih podatkih ali napake v opisu artikla; zanje ne odgovarjamo.

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21064627/F, premer žaginega lista: 350 mm, hitrost žaginega lista: 3.500 obr/min, vrtljajska hitrost (min.): 1.700 obr/min, največja hitrost vrtenja: 3.500 obr/min, Namizna krožna žaga MEP Cobra 352 MA. Nlodozm Threpfx Altsd

Stanje: rabljeno, Leto izdelave: 2003, Premer žaginega lista 300x32x2,5 mm Območje reza pri 90 stopinjah: okroglo 10-90 mm Območje reza pri 90 stopinjah: ploščato 80x10-80 mm Območje reza pri 90 stopinjah: kvadratno 10-80 mm Območje reza pri 90 stopinjah: okroglo - polni material 10-40 mm Območje reza pri 90 stopinjah: ploščato - polni material 40x10-40 mm Območje reza pri 90 stopinjah: kvadratno - polni material 10-40 mm Hitrost vrtenja 1700/3400 obr/min Njdpfsyv Nvtex Altold Teža stroja cca 600 kg Potrebna površina cca 2590x1910x1910 mm Dodatna oprema: - Nožni pedal z izklopom v sili - Mikro-razpršilna naprava - HM krožna žaga 350 mm

Stanje: rabljeno, Leto izdelave: 2001, Premer žaginega lista 350 mm Odpiranje primeža 190 mm Nodpfx Asyvvpmeltjld Število vrtljajev 15 / 30 / 45 / 90 min⁻¹ Pogonska moč 1,8 / 2,6 kW

Stanje: dober (rabljeno), Hladna krožna žaga, krožna žaga za kov, kotna žaga, krožna žaga, žagalna naprava, kovinska žaga -Proizvajalec: MEP, hladna krožna žaga za kov tip TRL 300, nagibna na obe strani -Motor: tip C 112 M -Moč: 2,2 / 3,0 kW -Hitrost: 720 / 1450 obr/min Nlodpfx Aoxlzytjltjd -Krožna žaga: Ø 315 mm -Območje reza pri 90 stopinjah plosko: 110 x 70 mm -Območje reza pri 45 stopinjah: 100 mm -Dodatki: vklj. 2 krožna rezila, glejte slike -Mere: 1230/630/V1800 mm -Teža: 273 kg

Stanje: dober (rabljeno), Radial fan, chip extraction blower, fan, extraction unit, dust extraction system, chip blower, extraction system - Manufacturer: MEP, extraction unit with transport frame - Type: unfortunately without type designation Njdoh Szarjpfx Altsld - Motor: Cantoni 0.75 kW / 2840 rpm - Base: on castors - Dimensions: 950/480/H1860 mm - Weight: 40 kg

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Na voljo je žaga MEP z avtomatizacijo Kenning. Območje kotnega reza min./maks.: -45°/60°, premer žaginega lista: 350 mm, premer odprtine: 32 mm, debelina: 2,5 mm, hitrost: 90 obr./min, največja odprtina primeža: 190 mm, največja zmogljivost reza: 115 mm. Dimenzije stroja (X/Y/Z): pribl. 2050 mm/1050 mm/1150 mm, teža: pribl. 450 kg, upravljanje: PC. Dokumentacija je na voljo. Možen je ogled na lokaciji. Nlodpfxjzf Ncps Altjd

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 350 mm, skupna dolžina: 2.720 mm, skupna višina: 1.740 mm, skupna širina: 1.460 mm, skupna masa: 560 kg, Automatic Metal Circular Saw MEP COBRA AX • Cutting angles: 90°, 45° left, 45° right • Cutting capacity (90°, round tube): 105 mm • Cutting capacity (90°, rectangular tube): 180×70 mm • Cutting capacity (45°, round tube): 105 mm • Cutting capacity (45°, square tube): 95 mm Nlodpey Rmcasfx Alted • Cutting capacity (45°, rectangular tube): 135×60 mm • Blade diameter: D = 350 mm • Blade bore: D = 32 mm • Automatic lubrication • Operating modes: manual or automatic • Pneumatic material feed • Total power requirement: 2.29 kW • Dimensions (L x W x H): approx. 2720 x 1460 x 1740 mm • Machine weight: approx. 560 kg Description: For sale is a bandsaw / metal bandsaw in good used condition. The machine operates flawlessly and is ready for immediate use. Upon request, we can also send you a video showing the machine in operation. Location: D-89350 Dürrlauingen Price: €1,450 EXW The saw is sold according to differential taxation pursuant to § 25a UStG, so no VAT will be shown. Delivery within a radius of up to 400 km can be arranged by agreement. If interested or if you have any questions, please get in touch. Inspection by appointment is possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Rabljena avtomatska tračna žaga MEP SHARK 310 CNC HS Dimenzije rezila: 4640x34x1,1mm Nedpjyyuxnjfx Altjld Variabilna rezalna hitrost rezila: 15-115m/min Kapaciteta reza: okroglo 310mm , kvadrat 310x310 Avtomatski napenjalec lista Avtomatski odstranjevalec opilkov Dodatna oprema: vertikalni primež Teža stroja: 2200kg Stroj je v odličnem stanju in bo v celoti prgledan in servisiran.

Stanje: novo, Dimenzije žaginega lista 350x32x4 mm Primež 180 mm 2 hitrosti 1700/3400 vrt/min Območje reza pri 90 stopinjah: okroglo 120 mm Območje reza pri 90 stopinjah: kvadratno 105 mm Območje reza pri 90 stopinjah: ploščato 180x70 mm Območje reza pri 45 stopinjah: okroglo 120/110 mm Nedpsy Dh Nnofx Altjld Območje reza pri 45 stopinjah: kvadratno 100/95 mm Območje reza pri 45 stopinjah: ploščato 135x60 mm Moč 2,2 kW Teža 225 kg Pri modelu COBRA 352 MA (samodejni primež), popolnoma opremljenem z osnovnim podstavkom, se primeži samodejno zaprejo ob spustu žagine glave.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 1.750 h, Funkcionalnost: popolnoma funkcionalen, MEP Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw (2019) Manufacturer: Mep Nledpey S Ezwofx Altjd Model: Tiger 372 CNC LR 4.0 Automatic Circular Metal Saw Year of manufacture: 2019 Condition: used, very good, tested and cleaned Operating hours: 1750h Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Infinitely variable cutting speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Documentation – 2 m infeed roller conveyor – Machine lamp – Chip conveyor – Coolant system

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 2.150 h, Funkcionalnost: popolnoma funkcionalen, MEP TIGER 372 CNC LR 4.0 Metal Circular Saw + CB4001 Magazine High-performance CNC automatic metal circular saw with microprocessor control for cutting from 45° right to 60° left. Manufacturer: MEP Model: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, lightly used Operating hours: 2128 h Cutting time: 1738 h Machine with microprocessor control and two CNC-controlled axes, allowing up to 300 cutting programs on the same material or material in the CB4001 loading magazine, each with its own quantity and length. Cutting capacity ROUND 0°: 120 mm Cutting capacity ROUND 45° left: 115 mm Cutting capacity ROUND 60° left: 115 mm Cutting capacity ROUND 45° right: 115 mm Cutting capacity SQUARE 0°: 110 mm Cutting capacity SQUARE 45° left: 100 mm Cutting capacity SQUARE 60° left: 90 mm Cutting capacity SQUARE 45° right: 100 mm Cutting capacity FLAT 0°: 180 x 100 mm Cutting capacity FLAT 45° left: 120 x 100 mm Cutting capacity FLAT 60° left: 90 x 90 mm Cutting capacity FLAT 45° right: 120 x 100 mm Variable speed: 15 to 150 rpm Motor: 5.5 kW Saw blade: 370 x 32 mm Nljdey S Ezqjpfx Altsd Coolant system Length: 2500 mm Width: 1840 mm Height: 1890 mm Weight: 1060 kg Scope of delivery: – Original documentation – 4 x saw blades

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska krožna žaga za aluminij MEP Cobra 352 nc 5.0 Njdpfswu Tz Rox Altsld Letnik 2017 Dimenzije lista: 350x32x3,4mm Rezalna hitrost list: 1700/3400 rpm Kot reza : od -45°do +45° Kapaciteta reza: pri 0°: okroglo: 120mm, kvadrat: 105mm , pravokotnik 180x70mm Zaslon na dotik Teža stroja: 605kg

Stanje: novo, Dimenzije žaginega lista: 350 x 32 x 3,4 mm Nljdpoyv Nqqsfx Altod 2 hitrosti: 1700/3400 vrt/min Območje reza pri 90 stopinjah: okroglo 120 mm Območje reza pri 90 stopinjah: kvadratno 105 mm Območje reza pri 90 stopinjah: ploščato 180x70 mm Območje reza pri 45 stopinjah: okroglo 120/110 mm Območje reza pri 45 stopinjah: kvadratno 100/95 mm Območje reza pri 45 stopinjah: ploščato 135x60 mm Moč: 1,5/2,2 kW Teža: 280 kg