Membranski Tiska nakup rabljenega (4.341)

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen,

Stanje: rabljeno, Diaphragm controller for control valves - Differential pressure-controlled diaphragm controller: 0.1 - 0.3 bar - Suitable for: Kombi 3 Plus - Return line: DN10 - DN40 - Quantity: 12 units available - Price: per piece Iedpfx Ajd Tqkrodkjhw - Weight: 0.5 kg

Stanje: rabljeno, Leto izdelave: 1991, Pressure 300 t Column gap 1350/1000 mm Iodpfxsvn U S Se Adkshw Stroke 500 mm Machine weight approx. 20 t Table area 1900x1600 mm Ram area 1900x1600 mm Table height 1000 mm Stroke and pressure shut-off Working feed 10 mm/s

Stanje: rabljeno, Leto izdelave: 1998, Pressure 40 t Stroke 250 mm Total power requirement 6 kW Machine weight approx. 3 t Frame/gap width 600/350 mm Table surface 860x620 mm Ram surface 860x620 mm Ihedpfjvnwfnex Adkow Table height 900 mm Manual lever operation Pressure cut-off

Stanje: rabljeno, Leto izdelave: 2015, Pentair BMF skid (with 18 modules) for beer filtration. Ideally suited for expanding existing installations or for the new setup of a filtration system. Machine (addition): Beer Membrane Filtration (BMF) Max. capacity: 100 hl/h filtrate, depending on beer quality Iedpfx Ajw Ea Ekedkshw Flow rate: 330 m³/h unfiltered pump Delivery pressure: 1 bar unfiltered pump Number of modules: 18 pcs. Length: approx. 5500 mm Width: approx. 1500 mm Operation / Control: ProfiBus connection to main PLC

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Tool tryout press 150 t Iedpfxjkw Rbas Adkjhw Clearance: 1000 mm Stroke: 600 mm Ram plate: 1500 mm x 1000 mm Table surface: 1500 mm x 1000 mm Front light curtain Siemens control Weight: 12.5 t

Leto izdelave: 1981, stanje: skoraj kot novo (rabljeno), Used hydraulic (triple-acting) deep drawing press LAUFFER 400t. The press has already been dismantled and is in excellent condition, as it has been used very little. Technical Data: Year of manufacture: 1981 Press force in t: 400 Height above floor in mm: 5940 Stroke in mm: 800 Table dimensions (LxW) in mm: 1600 x 1300 Ram dimensions (LxW) in mm: 1500 x 1300 Installation space in mm: 850 Upper ejector stroke in mm: 160 Upper ejector force in t: 6.3 Iodpfxsd Ntd Do Adkohw Lower ejector stroke in mm: 200 Lower ejector force in t: 12 Total power in kW: 150 Overall dimensions (LxWxH) in mm: 3550 x 1200 x 5940 Total weight in kg: 50,000

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Spray scrubbers with deflectors are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to utilizing the energy supplied by the spray nozzles, baffles are added to allow the gas stream to atomize the liquid as it passes over them. Ihjdpfx Adoinbi Sokjw

Stanje: novo, Leto izdelave: 2024, MOBIL 2500 Mobile Pneumatic Edge Press for Furniture Manufacturing! Technical Data MOBIL Type 2500 (Type 3000): > Sturdy welded-frame construction made from rectangular hollow sections with stop and straightening guide, suitable for solid wood, veneer, and plastic edges. > Integrated electric heating rod made of durable AL alloy, cross-section 64 x 46 mm, adjustable from 50 - 248°C, power 1200 (1450) watts. > 4 (6) clamping and pressing units, each with 7-fold ball bearing guidance. Each pressing unit features one clamping and one pressing cylinder; gluing width adjustable via moveable straightening guide from 12 - 105 mm. Edging thickness up to 50 mm for solid wood edges. > Adjustable counter-stops ensure precise edge overhang. > The clamping cylinders and counter-stops are equipped with rubber pads. The stop and straightening guide have a special glue-repellent coating. > The pneumatic pressing units can always be actuated in pairs, with one switch for 'clamping the workpiece' and one switch for 'pressing'. > Press is mobile with 4 swivel casters, 2 of which are braked. > The press is equipped with a pneumatic maintenance unit, 3/8" connection, adjustable from 3-10 bar. Electrical connection for heating rods is 230 V, 50 Hz, 1200 (1450) watts. Ihedpfjyuv Tox Adkjw Usable dimensions W x H x D in mm: 2500 x 50 x 105 External dimensions W x H x D in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL available on request! Packaging: €92

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with 1500 mm long straightening beam - Press force: 50 tons - Semi-automatic control system (99 programs, each with up to 16 steps) - Includes bending pins (without punch) - Includes tool holder for dies and foot pedal - Infinitely variable stroke adjustment: 0–300 mm - Adjustable working speed Working stroke max. 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3 phase Ihjdpfx Aodk H A Ijdksw - Working height: 900 mm - Enclosed table - Interchangeable wear plate - Weight: 1300 kg - Bending capacities: Flat material: 300 x 15 mm Flat on edge: 60 x 15 mm Round tube: 3/8"–2 1/2"

Leto izdelave: 2005, stanje: dober (rabljeno), Diaphragm valve DN40, plastic diaphragm valve 2/2-way Iodpfsb A Nhkex Adkshw -Type: 677 25D 0 1142 -Max. pressure: 6 bar -Weight: 1.6 kg

Stanje: dober (rabljeno), Obel Pedersen High-Frequency Throughfeed Belt Press Opel-Pedersen Press Type 2412 Pressing length: 2,500 mm, width: 600 mm with glue application system, lay-up table, HF generator T20 V and water cooling The system has been dismantled. Ihsdpfx Adsdybr Rjkow

Stanje: kot nova (razstavni stroj), - Press force: 700 kN - Press size: 2500 x 1250 mm - Medium heated (water), incl. heating unit up to a temperature of 85°C. - Incl. Joos A.B.S. system for protection of the Isdpfjwaznjx Adkehw heating plates in case of incorrect loading Price on request!

Stanje: kot nova (razstavni stroj), Technical Data: Maximum pressing force: 800 kN Ihsdpfsfhqhdsx Adkjw Adjustment range: 10 – 100 % Total pressing area: 3100 x 1300 mm Specific pressure at full capacity: 2.0 daN/cm² (kg/cm²) 6 cylinders, 80 mm diameter, 400 mm stroke Hydraulic operating pressure: 265 bar Press chamber height: 400 mm Heating Plates: Electric heating plate 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, scratch- and abrasion-resistant. Thermal high-pressure insulation between the heating plate and press table. Maximum operating temperature: 120°C.

Leto izdelave: 1979, stanje: rabljeno, številka stroja/vozila: 3534, Pressing force: 630 kN Return force: 100 kN Maximum ram stroke: 200 mm Installation height: 400 mm Throat depth approx.: 350 mm Table size: 610 x 800 mm Passage hole in table: 100 mm Ihjdpfx Asb Hk Dzsdksw Ram bore: 40 mm Ram advance speed: 350 mm/s Ram pressing speed: 18 mm/s Ram return speed: 380 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 1800 x 920 x 2440 mm Weight: 3.94 t

Leto izdelave: 1991, stanje: rabljeno, številka stroja/vozila: K2940, Pressing force: 150 t Working width: 4300 mm Clear distance between uprights: 3600 mm Throat depth: 300 mm Max. installation height: approx. 500/700 mm Working speed: up/down 41–65/10 mm/sec Backgauge: 1000 mm Electrical connection: 400 V, approx. 15 kVA kW Weight: 14 t Ijdpfxj Dnf Us Adkshw Space requirements: 4600 x 1950 x 3100 mm

Leto izdelave: 1990, stanje: rabljeno, Pressing force: 250 t Working width: 3550 mm Clear distance between uprights: 3050 mm Throat depth: 300 mm Backgauge: yes, mm Electrical connection: 400 V, approx. 26 kW Weight: 20 t Ihodps Dqaqofx Adkjw Required space: 2100 x 3800 x 3100 mm

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Side frame passage: 600 mm Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Iedpfx Adjcna Hfjkohw Strokes per minute: 40–180 Power requirement: 18.5 kW Weight: 20 tons Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Leto izdelave: 1992, stanje: rabljeno, številka stroja/vozila: 207320; Lg-Nr. 09361, Technical Data: - Max. working length: 1250 mm - Distance between uprights: 1050 mm - Max. pressing force: 80 t - Stroke: 250 mm - Throat depth: 300 mm - Max. installation height between table and ram: 560 mm - Stroke speeds: - Downward idle speed max: 100 mm/sec - Upward speed: 100 mm/sec - Downward pressing speed max: 12 mm/sec - Total drive power: 15 kW - Space requirement approx.: W 1750 x H 3400 x D 2000 mm - Weight: approx. 8500 kg - Equipped with: - CNC control CYBELEC DNC 7400 PSGY - CNC-controlled X-axis back gauge: 5 – 1000 mm - Z-axis adjustable in three stages, pneumatically height-adjustable Ihodeb Rk Ekopfx Adkow - Manually movable and foldable back gauge fingers - CNC-controlled pneumatic die shifting - Hydraulic tool clamping - Manual crowning - 2 support arms - Divided punch tool H 320 x L 1000 mm - Goose neck die H 320 mm x L 1000 mm - Universal die L 1000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Z293-068, skupna masa: 32.000 kg, širina mize: 1.500 mm, dolžina mize: 2.500 mm, stiskalna sila: 407 t, vrsta upravljanja: CNC krmiljenje, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Rok plačila za stroj je 20.11.2025! Ponudba velja kot zaveza za prevzem med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Širina mize: 1.500 mm Dolžina mize: 2.500 mm Hidravlični tlak: 320 bar Nazivna sila: 2 x 2.000 kN PODATKI O STROJU Električni podatki Obratovalna napetost: 400 V Frekvenca: 50 Hz Krmilna napetost: 230 V Priključek: 42 kW Nazivni tok: 100 A Dimenzije in teža Dimenzije: 5.000 x 4.000 x 3.800 mm Teža: 32.000 kg OPREMA Iodpfx Ajxm R S Isdkjhw CNC krmiljenje Hladilna naprava Filtrirna odsesava HILMA izhod konzol (1.600 mm)

Leto izdelave: 1994, stanje: dober (rabljeno), številka stroja/vozila: 25286,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Ihjdpfedvb Tfjx Adkow Ram surface: 700 x 350 mm Stroke: 01-120 mm Max. strokes per minute: approx. 70 Power requirement: 22 kW Weight: 8,500 kg Height: 2,900 mm

Leto izdelave: 1983, stanje: rabljeno, Pressure: 75 tons Table: 630x620 mm Slide: 500x450 mm Installation height: 370 mm Slide adjustment: 80 mm Lateral column passage: 300 mm Stroke adjustable: 8-100 mm Strokes per minute: 7-160 Power requirement: 11 kW Weight: 7 tons Height: 3050 mm Ihodpsctl Dtjfx Adksw SIRI roller feeder for material 300x3 mm Hydraulic overload protection Hydraulic Ortlinghaus clutch with auxiliary brake

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Attention – Do not buy used metallography equipment! Anyone familiar with metallography knows: “used” unfortunately means “worn out” in this context. Unless these devices are cleaned thoroughly on a daily basis, the high operational load will turn them into total losses within a few years. The ECOPRESS 102 is an automatic hot mounting press featuring an electrohydraulic pressure system—so it does not require a separate compressed air connection. The system operates with a working pressure up to 300 bar and an embedding temperature up to 200°C. Embedding time is freely programmable up to 60 minutes. Thanks to its fully automatic program cycle and integrated automatic cooling system, fast cycle times are ensured: Thermostatically controlled heating and cooling cycles, 1650 W heating output, automatic cooling process. The ECOPRESS 102 is supplied with a single press cylinder and piston (optional intermediate piston for two samples) available in diameters of 25 / 30 / 40 / 50 mm (and inch sizes). The EXOPRESS 202 offers two mounting cylinders. Completion of the embedding process is signaled acoustically by the machine. Delivery is ready for operation (including the embedding cylinder, piston, and optional intermediate piston for two samples as required for your application). Necessary connections: 230V / 50 Hz, 1 phase (220V), water supply and drain. * 1650-watt heating output * Up to 200°C embedding temperature * Embedding time adjustable up to 60 minutes * Automatic cooling sequence * No compressed air required * 12-month warranty Delivery includes a starter/test kit of consumables comprising: * 5 x 1 kg (5 kg total) various mounting resins * Release agent (400 ml) Ihjdpfx Aecwamxsdkew Delivery by freight carrier, free to Germany (ex works) (Optional: On-site installation by our technicians)

Leto izdelave: 2007, stanje: skoraj kot novo (rabljeno),