Max Simmel nakup rabljenega (26.237)

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Itsdpfoy Augwsx Abxoh Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) Ijdpfxjy Auhuj Abxsth * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram Itedpfxsy Aufmj Abxoh * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: potreben popravila (rabljeno), Somex Max 2 drilling unit Itodsd Huwgspfx Abxoh Manufacturer: Somex Model: Max 2 Spindle mount: ER 20 collet chuck RPM: 2820 * Frequency: 50 Hz * Power: 0.37 kW * Voltage: 220 / 380 V * Current: 2.1 / 1.2 A * *Motor data cannot be verified or read! Presumably similar specifications to identical units.

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Lastna teža: 215 kg Dimenzije tovornega prostora: 85 x 70 x 176 cm CE oznaka: da Serijska številka: DPX-27511 Za več informacij se obrnite na ekipo DPX. Itjdpfx Abjy E Ek Sjxjh

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Lastna teža: 180 kg Dimenzije tovornega prostora: 190 x 80 x 80 cm Iodpfjy E Ehdex Abxsth CE oznaka: da Serijska številka: DPX-27509.1 Za dodatne informacije se obrnite na ekipo DPX.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, 1. CPRC-600 Centering Table, length 1.2 m Itjdoynkgispfx Abxeh - Length 3 m - Two feed speeds (working and return) - Two centering arms - Pneumatic pressure 2. Multirip Saw, type RP-500-G, max. cutting height 160 mm - Saw shaft drive motor 55 kW, feed motor 2.2 kW (infinitely variable control – inverter) - Belt conveyor for chip extraction - Heavy-duty side pressure rollers for offcut removal - Automatic feed regulation - Automatic bearing lubrication - Maximum number of circular saw blades on shaft: 15 pcs (Ø 450 x 70 mm) - Maximum thickness of material (cant): 160 mm - Minimum thickness of sawn material: 50 mm - Minimum length of material: 1.2 m - Lower drive shafts: 6 pcs - Upper extraction – automatic pneumatic chip extraction, chip extraction connection Ø 250 mm - Lower chip extraction + conveyor + extraction diffuser Ø 200 mm, portable control panel - Machine length: 2,100 (2,600) mm - Machine width: 2,080 mm - Machine height: 1,800 mm - Machine weight: 2,200 kg - Output: 6–10 m³/h - Saw blades not included - Connected load approx. 62 kW 3. DPTOZ-100 Outfeed Conveyor for Cut Boards - Length: 4 m - 2 transverse chains 4. Transverse Chain Conveyor for Sorting and Removing Boards - Width: 1 m - Length: 2.5 m Very little used. Like new. TOP CONDITION.

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Lastna teža: 311 kg Itsdpfx Ajy Evk Njbxjh Dimenzije tovornega prostora: 104 x 90 x 176 cm CE-označba: da Serijska številka: DPX-27513 Za dodatne informacije se obrnite na ekipo DPX.

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Lastna teža: 330 kg Dimenzije tovornega prostora: 85 x 104 x 176 cm CE oznaka: da Itedpfxsy Evkvj Abxjh Serijska številka: DPX-27512 Za več informacij kontaktirajte ekipo DPX.

Leto izdelave: 2025, stanje: rabljeno, Novo: Da Lastna teža: 180 kg Dimenzije tovornega prostora: 80 x 80 x 190 cm Isdpfx Abjy Evi Eoxeth CE oznaka: da Serijska številka: DPX-27510 Za več informacij se obrnite na ekipo DPX.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – enabling color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Printhead: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer operation and image editing Weight: 90 kg Control display Table movement via leadscrew technology 360-degree printing capability available on request: for bottles and cylindrical objects A2 format: 45 x 65 cm and up to 20 cm height supported Assistance with software setup and printer instruction available upon request, Germany/Europe-wide. Iodpfxefbmgfj Abxsth

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 60919029293, This UV printer replaces conventional laser printers – even enabling color printing on glass, wood, textiles, plastic, metal, and many other materials. New Model: PS6090 Max Pro Speed Champion! Printable area: 70x100 cm Printing height: 150 mm Vacuum air table Water circulation system Print head: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV – 18 channels) Resolutions: 720x1080 / 720x1440 / 720x2160 dpi Includes printer and image editing software Ijdpofvyagefx Abxjth Dimensions: 1900x1600x1220 mm Weight: 400 kg

Stanje: novo, Leto izdelave: 2025, This UV printer replaces conventional laser printers – also for color prints on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Pro Three-head system: 2x CMYK + 4x White + 4x Varnish Flexibility powerhouse – color + white + varnish functionality Print heads: 3x Epson TX800 (CMYK + CMYK + WWWW + VVVV / 18 channels) Iedpfxjfvyace Abxeth Resolutions: 720x1080 / 720x1440 / 720x2160 dpi Includes printing and image editing software Weight: 99 kg Control display Vacuum air table – for holding lightweight materials firmly Table movement by screw drive technology 360-degree printing available upon request: for large round bottles or objects A2 print size: 45x65 cm, with 20 cm print height Printer dimensions: 1000 x 980 x 650 mm Water circulation cooling system Software setup and printer instructions available on request, Germany/Europe-wide.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New Model: PS-UV4060 Max Volume For large items with high media clearance Printhead: Epson TX800 (CMYK + WW / 6 channels) 720x1080 / 720x1440 / 720x2160 dpi Software for printer and image editing included Itsdpofvx U Hsfx Abxsh Weight: 90 kg Operator control display Table movement via leadscrew technology 360-degree application available on request: for large cylindrical bottles and items A2 format: 45x65 cm and 40 cm print height Printer dimensions: 107x106x102 cm Water circulation cooling system Software installation and printer training available upon request. Across Germany and Europe.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, This UV printer replaces conventional laser printers – and can also produce color prints on glass, wood, textiles, plastic, metal, and many other materials. New model: PS-UV4060 Max Pro Dual print head machine with 2x CMYK + 4x White Speed monster!! Print head: 2x Epson TX800 (CMYK + CMYK + WWWW / 12 channels) Resolutions: 720x1080 / 720x1440 / 720x2160 dpi Includes software for printing and image editing Ijdpefvx U Ujfx Abxeth Weight: 95 kg User interface display Table movement via screw drive 360-degree printing possible on request: for large round bottles and objects A2 format 45x65 cm and 20 cm print height Printer dimensions: 920x940x570 mm Water circulation cooling system Software setup and printer introduction available upon request. Germany/Europe-wide.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A25-M5-22-48408, natančnost ponavljanja: 0,004 mm, število osi: 7, Nakupna cena stroja je leta 2023 znašala 48.700 €! TEHNIČNE PODROBNOSTI Isdpsyqwgbefx Abxeth Število osi: 7 Dolžina roke: 2,5 m Ponavljajoča natančnost: 0,0042 mm Volumetrična natančnost: 0,054 mm PODROBNOSTI STROJA Datum kalibracije: 03.2023 Območje obratovalne temperature: 10 °C – 40 °C Obratovalna vlažnost: 95 % (brez kondenzacije) Obratovalna napetost: 100 – 240 V AC Frekvenca: 47/63 Hz Opombe: Brez profesionalne licence za CAM2 Probe/Taster Podatki, informacije in tehnične specifikacije so od proizvajalca, prodajalec ne prevzema odgovornosti.

Stanje: dober (rabljeno), Avtomatski skobelni stroj 230/120 mm, primeren za profiliranje, leto 2006 Isdpsxn Uptofx Abxjth

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, volumenski pretok: 2,05 m³/h, obratovalni tlak: 10 letvica, pritisk: 10 letvica, Oprema: hladilni sušilnik, Vijačni kompresor FINI K-MAX 20-10 Isdpfeyui Aijx Abxeth Kompresor popolnoma nov. Motor 15 kW Zmogljivost 2,05 m³/min Tlak 10 bar Leto izdelave 2013 Obratovalne ure: 2 h Kompresor je v celoti delujoč.

Leto izdelave: 2026, stanje: rabljeno, Novo: Da Lastna teža: 110 kg Dimenzije tovornega prostora: 60 x 40 x 100 cm CE-označba: da Iodpfx Asy Dnv Ujbxsth Serijska številka: DPX-27509 Za več informacij se obrnite na ekipo DPX.

Leto izdelave: 2026, stanje: rabljeno, Novo: Da Iodpsy Dnvzsfx Abxjth Lastna teža: 90 kg Dimenzije tovornega prostora: 60 x 40 x 100 cm CE-oznaka: da Serijska številka: DPX-27508 Za dodatne informacije se obrnite na ekipo DPX.

Leto izdelave: 2026, stanje: rabljeno, Novo: Da Lastna teža: 35 kg Dimenzije tovornega prostora: 40 x 20 x 60 cm Ijdsy Dnvnjpfx Abxeth CE oznaka: da Serijska številka: DPX-27502 Za dodatne informacije se obrnite na ekipo DPX.

Leto izdelave: 2026, stanje: rabljeno, Novo: Da Lastna teža: 35 kg Mere tovornega prostora: 40 x 20 x 60 cm Oznaka CE: da Serijska številka: DPX-27500 Ijdpfx Aboy Dnvbjxsth Za več informacij se obrnite na ekipo DPX.

Leto izdelave: 2026, stanje: rabljeno, Novo: Da Lastna teža: 75 kg Dimenzije tovornega prostora: 60 x 30 x 100 cm Isdsy Dntyspfx Abxsth CE označba: da Serijska številka: DPX-27506 Za več informacij se obrnite na ekipo DPX.

Leto izdelave: 2026, stanje: rabljeno, Novo: Da Lastna teža: 85 kg Dimenzije tovornega prostora: 60 x 35 x 100 cm CE-označba: da Serijska številka: DPX-27507 Za več informacij se obrnite na ekipo DPX. Iodpoy Dnttefx Abxoth

Leto izdelave: 2026, stanje: rabljeno, Novo: Da Lastna teža: 60 kg Ijdpoy Dntgjfx Abxjth Dimenzije tovornega prostora: 60 x 30 x 100 cm CE oznaka: da Serijska številka: DPX-27505 Za dodatne informacije kontaktirajte ekipo DPX.