Martin T 43 nakup rabljenega (87)

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available - Njdpfsqlckpex Abbjcl

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts Ncjdsv Erkaspfx Abbol T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples Ncedpfx Aeqlclbsbbel • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Electrode holder with air connection for electrode device, electrode welding machine, gouging tool, electrode holder - Suitable for: carbon arc process - Cable length: 2.5 m - Dinse connector - Air connection - Quantity: 2 cables available - Price: per piece Nodpfx Abocf Dhujbjcl - Weight: 4 kg

Stanje: dober (rabljeno), Leto izdelave: 1987, Martin Transline 1228 Maks. dimenzija: 2800x1260 mm Maks. hitrost: 12.000 listov/uro Avtomatski podajalnik 2-barvni fleksotisk, leto 1987 Avtomatski slotter, leto 2000 Rotacijsko izsekovanje, leto 1987 Postaja za zgibanje Lepilni sistem hhs Taper-Rapidex Stroj za povezovanje Signode, leto 2000 Nodpfx Aex H Nbwjbbjcl Paletizator Martin, leto 2000

Stanje: rabljeno, Namizni rezkar MARTIN T21 - rabljen - fino nastavljivo rezkarsko vodilo, smer vrtenja desno/levo Ncsdsw Nv Nlopfx Abbel ----- Tehnični podatki ----- Velikost mize: 1.000 x 930 mm, Premer vretena: 30 mm, Nastavitev višine: 150 mm, Hitrosti: 3.000/4.500/6.000/9.000 obr/min, Premer odsesovalnega nastavka: 120 mm, Teža: 630 kg

Stanje: rabljeno, Skobeljni stroj MARTIN T51 - rabljeno - tihi robovi miz, vodilni trak, motorna zavora ----- Tehnični podatki ----- širina skobljanja: 51 mm, dolžina mize: 2.520 mm, maks. odvzem: 16 mm, premer valja: 120 mm, Nedexm R Upepfx Abbocl število nožev: 2 kosa, nastavljiv kot vodila: 0-45°, priključek za odsesavanje: 140 mm, moč motorja: 4,8 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: nepreverjeno, širina skobljanja: 540 mm, skupna dolžina: 2.400 mm, skupna višina: 800 mm, skupna širina: 1.100 mm, dolžina mize: 2.400 mm, dolžina obravnalne ograje: 1.200 mm, višina ograje za poravnavanje: 1.200 mm, delovna širina: 540 mm, dolžina mize rezkalnega stroja: 1.200 mm, število rezil rezkalnika: 2, vrsta vhodnega toka: trifazni, višina mize: 800 mm, potrebna širina: 1.100 mm, zahteva za prostor dolžina: 2.500 mm, rabljeni skobeljni stroj Nedpfx Abox Ak Izebjcl Prodaja brez garancije Prevzem možen samo v Haimhausnu

Stanje: zelo dobro (rabljeno), Formatna žaga Martin T60 3-osni predrezovalni agregat, Voziček 330 cm, Nagib in dvig/spust motorizirano nastavljiva, Ograja motorizirano nastavljiva, max. 125 cm, Ncodpfx Ajx Npyfsbbol Žaga max 400 mm, min 250 mm, 3 hitrosti vrtenja, Naprava za kotne reze v kompletu, Digitalni prikazi na ograji in vozičku, Znamka, zelo dobra stroj.

Stanje: zelo dobro (rabljeno), Formatna žaga Martin T60, Voziček 300 cm, Ncodpfx Aetza Smebbsl Glavni motor 5,5 kW, Pravilo na desni strani nastavljivo do 1250 mm, Naklon motorizirano nastavljiv, Gor-dol motorizirano nastavljiv, Maks. žagin list 400 mm, Stranski obračalni voziček.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, obratovalne ure: 1.870 h, Tilting panel saw T 73 by Martin with 3-axis scorer and 3m table Sliding table length: 3000 mm Saw blade tilt from 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Max. cutting height: 170 mm Cutting width up to 1100 mm, adjustable via handwheel at the front and manually movable Tilting angle and height adjustment electrically controlled Crosscut fence up to approx. 3350 mm with 2-point support Parallelogram cross table with digital angle display and roller Fold-away rip fence Extraction ports: 120 + 100 mm Sliding carriage lockable in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electric adjustment while the machine is running 2 safety hoods Counter-angle fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking Ncodpextvcxjfx Abbsl Machine with light wear on the anodized surface of the sliding table. Minor cuts on the sliding table have been repaired. Original paint, only touched up in spots. Excellent condition as shown in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "Further offers from this supplier."

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V 435496, dolžina rezanja (maks.): 3.700 mm, največja širina rezanja: 1.100 mm, največja višina reza: 170 mm, dolžinski omejevalnik: 3.200 mm, Oprema: dozator, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Največja dolžina reza: 3.700 mm Največja širina reza: 1.100 mm Širina reza na vzporednem vodilu: 1.100 mm Največja višina reza: 170 mm Največja višina reza s predrezilom: 170 mm Premer žaginega lista: 450 mm Dolžinski naslon: 3.200 mm Dolžina pomične mize: 3.700 mm Nsdpfx Asx Dkp Iebbjcl Širina pomične mize: 450 mm PODROBNOSTI STROJA Skupna teža: 1.800 kg Priključna moč: 7,5 kW (10,20 KM) Premer sesalne cevke: 120 mm OPREMA Motorska zavora Predrezilo Digitalni prečni voziček Digitalni dolžinski naslon Električni 3-osni predrezilo Premično nosilno roko pokrova 400 mm Dolžina reza 3,70 m Laserski kazalnik reza Držalo predlog Pnevmatsko zložljivo krožno vodilo Drugo odlagalno mesto

Stanje: rabljeno, Leto izdelave: 2006, Dolžina vozička: 3000 mm Širina reza pri vzdolžnem prislonu: 1200 mm Širina reza pri prečnem prislonu: 3200 mm Globina reza: 120 mm Predrezilo: da Minimalni mazalni sistem za obdelavo plastike ali aluminija: Da Nastavitev višine žaginega lista: električna / pozicijsko krmiljenje Nastavitev nagiba žaginega lista: električna / pozicijsko krmiljenje Nastavitev vzdolžnega prislona: električna / pozicijsko krmiljenje Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Prikaz vzdolžnega prislona: digitalni prikaz Prikaz prečnega merila: digitalno Premer žaginega lista: 400 mm Obrati: 4000 / 4800 / 6000 min⁻¹ Moč motorja: 7,5 kW Delovne ure: 774 Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 3500 mm Nsdpfx Absxgn Rbobjcl Širina stroja: 2200 mm Teža: 1200 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V 455228, širina skobljanja: 500 mm, dolžina rezanja (maks.): 3.300 mm, širina reza pri vzporednem vodilu: 1.650 mm, Vrhunski skobeljni stroj Zapakirano in pripravljeno za pošiljanje! Ncedpsyakqlsfx Abbjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, For sale are 2 air cannons for silo loosening. Manufacturer: Martin Engineering Capacity: 50 liters Operating pressure: 8 bar Year of manufacture: 2002 Nsdpsh A H Thjfx Abbscl Additionally, 1 unit: Capacity: 25 liters Operating pressure: 10 bar Year of manufacture: 2011

Stanje: zelo dobro (rabljeno), Motor 5,5 kW Schnitthöhe 9 cm Nodpswtl Ndofx Abbocl Tischlänge 330 cm Durchlass 100 cm Vorritzer Schnittwinkel und -höhe hydraulisch einstellbar

Stanje: rabljeno, Leto izdelave: 1981, used, good condition Manufacturer: Martin Model: T 70 Year of manufacture: 1981 Machine number: V-112873 GS-tested Motor: 4.8 kW Steel guides Cutting length approx. 2700 mm Tiltable up to 45° Parallelogram safety guard Table extension Hydraulic height adjustment Hydraulic tilting adjustment Mitre fence Extraction connection diameter: 120/80 mm Space required: approx. 2800 mm x 3400 mm x 1200 mm Weight: approx. 1000 kg Nedpfxewkvw Ts Abbjcl Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Stanje: skoraj kot novo (rabljeno), Milling arbor 40mm for Martin tilting spindle moulder T27 Clamping length 160mm, arbor diameter 40mm. Equipped with quick-clamping nut. Njdjwnm U Rspfx Abbocl From stock, evidently has not been used so far. The milling arbor is suitable only for the T27, not for the T26. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'More offers from this provider.'

Stanje: skoraj kot novo (rabljeno), Martin quick-release nut for 40mm milling arbor. From stock, apparently unused so far. The quick-release nut is used for the T27. Nedpfewnnauex Abbocl The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'more offers from this supplier.'

Stanje: zelo dobro (rabljeno), Angle adjustment Speed control Central spindle lubrication 5 kW motor Spindle diameter 30 mm Nsdowtl N Depfx Abbocl Table length 240 cm Table width 35 cm Support extendable up to 80 cm Request more information

Stanje: rabljeno, Leto izdelave: 2015, Eine hochqualitative, in Deutschland entwickelte und gebaute Tischfräsmaschine des führenden Herstellers Martin. Obwohl die Maschine kompakt konstruiert ist, verfügt sie standardmäßig über zahlreiche Premium-Features, darunter ein schwerer Verbundrahmen für maximale Stabilität sowie eine 5,7" TFT Farb-Touchscreen-Steuereinheit. Diese ist ergonomisch auf Augenhöhe angebracht und trägt erheblich zur Reduzierung der Rüstzeiten bei. Über die Steuereinheit kann der Bediener bequem die gewünschte Höhe der Spindel einstellen. Zusätzlich ermöglicht der Werkzeugdatenspeicher das Abspeichern von bis zu 500 verschiedenen Werkzeugen, wobei die Spindelposition, Drehzahl und weitere relevante Programmdaten für jedes ausgewählte Werkzeug automatisch abgerufen werden. Weitere Standardausstattungen sind eine präzise Anschlageinheit mit Handradverstellung und digitaler Anzeige in der Steuerung, eine elektronische Sanftbremse für den Spindelmotor sowie das 'Dornfix' Schnellwechselsystem für die Spindelwelle. Ausstattung: - Schwerer Maschinenunterbau für maximale Stabilität und präzise Bearbeitung - Präzisionsgeschliffener Graugusstisch - Überkopf-aufgebautes, benutzerfreundliches Farb-Touchscreen-Bedienfeld - Hochwertige, präzise geführte Anschlaglineale, Verstellung über Handrad - 1 Stück Spindelwelle 1 1/4" Durchmesser (140 mm Nutzlänge), SK40 'Dornfix'-Schnellwechselsystem - 7,5 kW Motor, Spindeldrehzahlen: 3000, 4500, 6000, 8000 und 10.000 1/min Ncedpfxexx Upne Abbol - Zentrale Schmierstellen Mit folgenden Optionen ausgestattet: - Tischverlängerungen beidseitig – Gesamtlänge 2200 mm, ausziehbare Werkstückauflage bis 3000 mm Gesamtlänge - Integrierte Anschlagplatten - Digitale Anzeige der Anschlagplatten-Position direkt am Steuermonitor, Verstellung über Handrad (anstatt Skala) - Grauguss-Konsole für Vorschubeinrichtung - Komfort-Vorschubarm mit Schnellhub/-senkung per Handrad und mechanischer Höhenanzeige; massive Graugusshalter und robuste Stahlklemmhebel für sichere Arretierung der Vorschubvorrichtung - Vorschubapparat variomatic, 3 Walzen, stufenlos einstellbare Vorschubgeschwindigkeit 3–17 m/min, Ein/Aus-Schalter in der Bedienkonsole integriert - Centrex-Schutzvorrichtung anstelle des Standard-CPS-Schutzes

Stanje: dober (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Debelinka 2 x trakasta rezila za skobljanje Električna nastavitev višine Stanje: pripravljen za uporabo Letnica izdelave stroja je ocenjena, tablice s tehničnimi podatki na stroju ne najdem! Nsdpfjycgcpjx Abbocl

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 527 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 05-9473, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 60 mm, skupna višina: 2.000 mm, skupna dolžina: 1.600 mm, skupna širina: 3.800 mm, največja hitrost vrtenja: 12.000 obr/min, vhodna napetost: 400 V, The machine in question is a grinding and drilling center (manufacturer's term: stone cutting machine). The machine is constructed as a vertical machining center in gantry design. The frame consists of a welded steel tube structure. The machine’s drilling head is mounted vertically. Angle adjustment of the drilling head is not possible in any axis. Tools with horizontal axes can be mounted using the available angle grinder attachment. The tool can be moved linearly in 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and not movable. The machine is used for: - Creating cutouts, producing rounded edge profiles, - Creating drip trays or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs. The machine is additionally equipped with: - an angle grinder attachment - a compressed air connection (for generating vacuum for the clamping devices and for cleaning out the drill spindle) - a water connection (for cooling tool and workpiece during machining) Ncodpfx Ajw Upzfsbbsl Machine specifications: Manufacturer: Martin Kolb Maschinenbau - Type: Genius 2500 - Serial number: 05-9473 - Year of manufacture: 2005 - Max. machining area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Drive power (main drive): 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread - Max. drilling diameter: up to 100 mm Various accessories such as cutters and additional tool holders are also included.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ravnalni skobeljni stroj Širina oblanja 500 mm Trakasti rezili za oblanje Nsdpfxeyah Ege Abbecl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, Namizna rezkalka Martin Ncodpfx Absyahl Tsbol Stroj deluje zelo mirno s 3-valjnim podajalnikom.