Martin T 43 nakup rabljenega (83)

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 2.500 mm, največja širina rezanja: 1.050 mm, RABLJENA, DOBRO OHRANJENA FORMATNA ŽAGA MARTIN T71 BREZ ZAŠČITNEGA POKROVA NAPRODAJ! NASTAVLJANJE VIŠINE IN NAKLONA S PEDALOM: DOLŽINA VOZNE MIZE 2500MM ŠIRINA REZA 1050MM Isdpfx Ahewfcx Ts Djtn

Stanje: rabljeno, Sliding table saw Martin T70, year 1981, good condition, approx. 7 kW, 3200 mm sliding table length. Itodpjvrvlzofx Ah Don Subject to prior sale, errors and typographical mistakes excepted.

Stanje: rabljeno, Leto izdelave: 1990, Working width: 630 mm Itedpfxenn Nqwj Ah Dsn Dimensions (L x W x H): 115 x 110 x 120 mm Rotational speed: 5000 rpm Connection voltage: 380 V

Stanje: rabljeno, vklj. 3-valjni podajalnik vklj. Aigner razširitve mize Lokacija skladišča: dobavitelj Iodpfx Ahow N Sz Rs Dstn

Stanje: rabljeno, Leto izdelave: 1996, Dolžina sani: 3300 mm Širina reza pri vzdolžnem prislonu: 1000 mm Širina reza pri prečni prislonu: 3200 mm Globina reza: 170 mm Itodexnhp Hjpfx Ah Djn Predrezilo: da Višinsko nastavljanje žaginega lista: hidravlično Nagibno nastavljanje žaginega lista: hidravlično Nastavljanje vzdolžnega prislona: ročno kolo Prikaz kota žaginega lista: digitalno Prikaz višine reza: digitalno Prikaz vzdolžnega prislona: digitalni prikaz Prikaz prečnega merila: skala Premer žaginega lista: 500 mm Število vrtljajev: 2800 / 4000 / 5500 obr/min Moč motorja: 5,5 kW Priključek za odsesavanje: 100 mm in 120 mm Dolžina stroja: 3550 mm Širina stroja: 2200 mm Teža: ca. 1400 kg

Stanje: dober (rabljeno), Koda: 0035 Znamka: MARTIN - ITALIJA Model: EURO 3 Cinkano pločevinasto ohišje filtrov s filtrirnimi rokavi za prah primeren za les, barve in ostale materiale Tehnični podatki: Moč motorja: 3 Hp Iedpfx Ajvz A Eyjh Djtn Število filtrirnih rokavov: 24 Število zbiralnih vreč: 3, premer 500 mm Premer sesalnega priključka: 400 mm Električna omarica Skupne dimenzije nameščenega sesalca: 2300 x 1000 x 4100 mm (v) Transportne dimenzije: 4100 x 2300 x 1000 mm (v)

Stanje: dober (rabljeno), Leto izdelave: 2002, Robust tilting spindle moulder T 26, tiltable from -45 to +45 degrees, equipped with 2-axis positioning control Duocontrol Tilting spindle moulder in excellent configuration A must-have for any Martin enthusiast Pole-changing drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle adjustable electrically from -45 to +45 degrees Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the tilting angle is displayed in the top display and is then set at the stop, enabling settings to be made based on drawings Four speeds: 3,000, 4,500, 6,000 and 9,000 rpm Spindle diameter 30mm, quick-change arbor with torque wrench Electrically adjustable fence, infeed jaw adjustable by handwheel and SIKO counter Axes can be operated manually or positioning of height and fence can be automatic Fence can be pivoted aside with lifting device (for curved milling operations) Table opening via eccentric table rings, electrically adjustable Table extension right and left with pull-out workpiece support Support can be extended by 700mm Table length approx. 2400mm Fold-down fence for tenoning operations Original Martin aluminium fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, forward/reverse, new rollers Power feed socket, switchable from the control panel Extraction ports 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating manual CE mark Itedpfx Ahovv H T Rs Don Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'more offers from this supplier.'

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available - Itodpfsqlck Nox Ah Don

Stanje: rabljeno, Skobeljni stroj MARTIN T51 - rabljeno - tihi robovi miz, vodilni trak, motorna zavora ----- Tehnični podatki ----- širina skobljanja: 51 mm, dolžina mize: 2.520 mm, maks. odvzem: 16 mm, premer valja: 120 mm, Itedpjxm R Upsfx Ah Djn število nožev: 2 kosa, nastavljiv kot vodila: 0-45°, priključek za odsesavanje: 140 mm, moč motorja: 4,8 kW

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Martin 718 Leto 1990-2000 Prefeeder Serco leto 2000 2-barvni Flexo Rotacijski izsekovalni stroj Postaja za zgibanje in lepljenje Counter ejector Siebeck stroj za povezovanje, leto 1996 Paletizer Martin Manut, leto 1996 Itedpjxl Au Esfx Ah Den

Stanje: rabljeno, Leto izdelave: 2006, Dolžina vozička: 3000 mm Širina reza pri vzdolžnem prislonu: 1200 mm Širina reza pri prečnem prislonu: 3200 mm Globina reza: 120 mm Predrezilo: da Minimalni mazalni sistem za obdelavo plastike ali aluminija: Da Nastavitev višine žaginega lista: električna / pozicijsko krmiljenje Nastavitev nagiba žaginega lista: električna / pozicijsko krmiljenje Iodpfjxgn Rbjx Ah Detn Nastavitev vzdolžnega prislona: električna / pozicijsko krmiljenje Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Prikaz vzdolžnega prislona: digitalni prikaz Prikaz prečnega merila: digitalno Premer žaginega lista: 400 mm Obrati: 4000 / 4800 / 6000 min⁻¹ Moč motorja: 7,5 kW Delovne ure: 774 Priključek za odsesavanje: 80 in 120 mm Dolžina stroja: 3500 mm Širina stroja: 2200 mm Teža: 1200 kg

Stanje: dober (rabljeno), Stroj za rezanje čepov in utorov T27 - Nastavitev frezalne vretena in čelilne žage z ročnim kolesom - Območje višinske nastavitve frezalnega vretena: 145 mm - Območje višinske nastavitve čelilne žage: 190 mm - Največja vpenjalna višina orodij za frezanje: 135 mm - Največji premer orodij za frezanje: 390 mm - Hitrosti frezalne gredi: 3000 + 4500 obr/min - Premer vpenjalnega nastavka freznih orodij: 40 mm Iodsxlkv Repfx Ah Detn - Dolžinski omejevalnik: 1,75 m - Teža: 720 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Tilting Spindle Moulder MARTIN T25 Very good condition, the machine comes from a correctional facility and has been unused for the last few years, it was only operated by one person and used very little. Everything functions perfectly. All bearings and guides are in good condition. Itsdpfx Aexn A H Toh Don Year of manufacture: 1989. The machine features an overhead control panel. On the milling fence, one fence jaw can be depth-adjusted with fine adjustment and scale, allowing for precision jointing, e.g., on a glue joint profile. The complete fence can be depth-adjusted via handwheel and leadscrew for highly accurate and fast settings. Additionally, one of the two fence jaws is swiveling. With spindle lock via lever. Chip extraction is highly effective, with two extraction ports: 125 mm at the fence and 100 mm at the machine table. Equipped with a 30 mm spindle, infinitely tiltable from -5 to 45°, spindle tilting is electric with digital display. With forward/reverse rotation. Delivery and demonstration personally by us throughout Germany for €220. This ensures you have no risk when purchasing. Shipping to Austria and the rest of the EU available on request. Large table opening up to 480 mm, adjustable with various rings (enabling the use of large-diameter cutters and safe operation with small cutters). Spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric with digital readout. The table is made of heavily ribbed cast iron. With exchangeable spindle (a 40 mm spindle can also be used). Very robust and durable design, the machine is built for heavy-duty milling work and is suitable for all routing applications. Optimal power transmission via V-belt drive. Supplied with manual. Includes 3-roller power feed unit STEFF, type 34. Power feeder with forward/reverse and 4 speeds; feed rollers are individually mounted. Machine table is 1180 mm wide and 800 mm deep. Ready for immediate use. 380V, 5000 and 6000W, thanks to the two speeds. Complete with all necessary safety devices, motor brake, and emergency stop; the machine is certified by the woodworking trade association (Holz-BG) and carries the GS-tested safety mark. Approximate weight: 1200 kg. With motor protection switch against overload. Professional-grade equipment, not a DIY store product. Optimal, simple, fast, and safe handling.

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun Ijdpfxeqlckpo Ah Detn 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Leto izdelave: 2003, Martinsko vretenarsko rezkar T20 Prenovljen stroj Leto: 2003 Specifikacije: Isdoxl Rtcopfx Ah Detn 50 mm vreteno Fiksno vreteno Izmenljivo vreteno Podaljšek mize in sprednja podpora Dolžina mize: 2260 mm Globina mize: 900 mm Električna nastavitev višine s preciznim digitalnim prikazom Hitrosti vretena: 3000 / 4500 / 6000 / 9000 vrt/min Maksimalni premer rezkarja: 250 mm Maksimalni premer čepilnega orodja: 350 mm 19 A / 400 V

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 527 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 05-9473, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 60 mm, skupna višina: 2.000 mm, skupna dolžina: 1.600 mm, skupna širina: 3.800 mm, največja hitrost vrtenja: 12.000 obr/min, vhodna napetost: 400 V, The machine in question is a grinding and drilling center (manufacturer's term: stone cutting machine). The machine is constructed as a vertical machining center in gantry design. The frame consists of a welded steel tube structure. The machine’s drilling head is mounted vertically. Angle adjustment of the drilling head is not possible in any axis. Tools with horizontal axes can be mounted using the available angle grinder attachment. The tool can be moved linearly in 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and not movable. The machine is used for: - Creating cutouts, producing rounded edge profiles, Itodpfxow Upzfo Ah Dsn - Creating drip trays or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs. The machine is additionally equipped with: - an angle grinder attachment - a compressed air connection (for generating vacuum for the clamping devices and for cleaning out the drill spindle) - a water connection (for cooling tool and workpiece during machining) Machine specifications: Manufacturer: Martin Kolb Maschinenbau - Type: Genius 2500 - Serial number: 05-9473 - Year of manufacture: 2005 - Max. machining area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Drive power (main drive): 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread - Max. drilling diameter: up to 100 mm Various accessories such as cutters and additional tool holders are also included.

Stanje: zelo dobro (rabljeno), Kataloška številka 7758 TEHNIČNI PODATKI Krožna žaga: - max. premer žaginega lista 350 mm - vreteno 30 mm - vreteno blokirano - žagin list nastavljiv naprej/nazaj, gor/dol, kot - zaščita za žagin list - motor 1,1 kW - premer odsesovalnega priključka 80 mm Rezkar: - čepilno vreteno: - premer vretena 40 mm - delovna višina vretena 150 mm Iodpfxoxhdqge Ah Detn - vreteno blokirano - max. premer rezkarja 350 mm - 2 hitrostni razredi 3000, 4500 obr/min - motor cca 5,5 kW - zavorni sistem - stranski voziček – ročni pomik - mere vozička dolžina/širina 1180x600 mm - kotno pravilo - pnevmatski pritisk - premer odsesovalnih priključkov 125 mm - mere dolžina/širina/višina 1750/2600 (za odpremo 1200)/1400 mm - teža 715 kg PREDNOSTI – nemška proizvodnja – zelo dobro stanje – rabljeni čepilni stroj Neto cena: 13.900 PLN Neto cena: 3.270 EUR pri menjalnem tečaju 4,25 EUR (Cene se lahko spreminjajo glede na nihanja tečaja)

Stanje: zelo dobro (rabljeno), Formatna žaga Martin T72a Dolžina vozička 3200 mm Širina reza na desni strani 1250 mm Maksimalna višina reza 170 mm Predrezilo Hidravlično nastavljanje višine reza Hidravlično nastavljanje kota reza Desno vodilo nastavljivo hidravlično Velikost glavne žage min/max 200-500 mm Velikost predrezila 120 mm Hitrost žage nastavljiva s pomočjo jermenov 2800-4000-5500 vrt/min Glavni motor 5,5 kW Motor predrezila 0,75 kW CE certifikat Tehnična dokumentacija Itodpfxjxapvxo Ah Don

Stanje: rabljeno, Leto izdelave: 2004, Naprava je delujoča. Iodpfsw Tbfgsx Ah Djtn

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Ijdpfjv Erkajx Ah Djtn Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: rabljeno, Leto izdelave: 2003, Moč: 5 kW (7 KM) Višina: 164 cm Napetost: 400 V Proizvajalec: Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Leto: 2003 Tip: Laboratorijski in pilotni liofilizator Uporaba: Sušenje suhih ali tekočih vzorcev v vialah, steklenicah, ampulah, prirobnicah, pladnjih ipd. Primeri izdelkov: - Biološki proizvodi: bakterije, virusi, tkiva, rastlinski ekstrakti - Farmacevtski izdelki: plazma, serum, protitelesa, cepiva - Biokemijski testi - Živilski izdelki: fermenti, vitamini Splošni podatki: - Predzamrzovanje, liofilizacija (sublimacija) in končno sušenje - Uporaba vakuuma - 3 + 1 police - Površina polic: 0,3 m² - Razmik med policami: 68 mm - Programska oprema: SCADA - Čistilna prirobnica - Sistem za odvzem vzorcev - Ročni zamašek za viale Kondenzator ledu: - Kapaciteta: 8,0 kg - Učinkovitost: 6,0 kg / 24 h - Temperatura: -75°C Dimenzije: - Širina: 800 mm - Globina: 840 mm - Višina: 1640 mm - Teža: ~650 kg Energetski podatki: Itodowqd Umopfx Ah Dsn - Napajanje: 3-fazno, 400 V / 50 Hz - Poraba moči: maks. 5,0 kVA - Največja delovna temperatura okolice: +25°C Hladilno sredstvo: - Tipi: R404A, R508, Isceon 89 - Medij za prenos toplote: Syltherm XLT Tehnične priključitve: - Dovod tople vode: ½” cevni priključek - Odtok vode za odtaljevanje: ½” cevni priključek - Odvod vakuuma: cev iz nerjavečega jekla DN 25 - Prezračevanje: priključek DN 6 Ostalo: - Na voljo dokumentacija in kvalifikacije - Prodaja skupaj z računalnikom LPC plus za analizo podatkov - Priloženi rezervni deli

Leto izdelave: 1969, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 18059, Centre height: 250 mm Centre distance: approx. 1740 mm Swing diameter over bed: 500 mm Spindle bore: 63 mm Itjdpfoidiq Aex Ah Don Spindle mount: Size 6 Tailstock taper: MT 5 Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/cross 0.014-1/0.0063-0.45 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, 7.5 kW Required space: 3370 x 1000 x 1400 mm Weight: 2360 kg

Stanje: zelo dobro (rabljeno), KATALOGNA ŠTEVILKA 6607 Itjdsh I N Sfjpfx Ah Dsn TEHNIČNI PODATKI Krožna žaga: - največji premer žaginega lista 350 mm - vreteno 30 mm - blokada vretena - list nastavljiv naprej/nazaj, gor/dol - zaščitni pokrov za žagin list - motor 1,1 kW - premer priključka za odsesavanje 80 mm Rezkar: čepilno vreteno: - premer vretena 40 mm - delovna višina vretena 140 mm - blokada vretena - največji premer rezkarja 350 mm - 2 hitrosti vrtenja 3000, 4500 vrt/min - motor 5,5 kW - zavorni sistem - bočni voziček – ročni pomik - mere vozička dolžina/širina 1180x600 mm - kotno vodilo - 2 pnevmatska pritiska - premer priključkov za odsesavanje 120 mm - mere dolžina/širina/višina 2600 (za pošiljanje 2000)/1600/1450 mm - teža 735 kg – zelo dobro ohranjeno – rabljeni čepilni stroj Cena neto: 13.900 PLN Cena neto: 3.270 EUR (odvisno od menjalnega tečaja, 4,25 EUR) (Cene se lahko razlikujejo ob večjih nihanjih)

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s Itjdpfeqlclbex Ah Djn • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Leto izdelave: 1967, Centre height: 300 mm Centre distance: 1,000 mm Swing diameter over bed: 610 mm Spindle bore: 71 mm Spindle mount: Size 8 Tailstock taper: MT 5 Itodpevzn E Sjfx Ah Den Spindle speeds: approx. 11.2 - 1,800 rpm Feeds (longitudinal/cross): 0.014–16 / 0.063–7 mm/rev Thread pitches: 0.1 – 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2,900 x 1,450 x 1,750 mm