Martin T 25 nakup rabljenega (81)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Število obratov rezkalne gredi: 30.000 + 4.000 vrt./min Višinsko nastavljiv razpon vretena za rezkanje: 135 mm Največji premer rezkalnega orodja: 390 mm Dujdoyync Tspfx Abteu Največja vpenjalna višina rezkalnih orodij: 225 mm Premer vretena: 40 mm Motor za rezkanje: 5,5 kW Število obratov prečne žage: 3.000 vrt./min Višinska nastavitev prečne žage: 190 mm Maksimalna višina reza prečne žage: 100 mm Največji premer žaginega lista: 350 mm Motor prečne žage: 0,75 kW Središčna odprtina žaginega lista: 30 mm Delovna dolžina drsne mize: 1.270 mm Območje dolžinskega prislona: 1.750 mm Teža pribl. 740 kg

Stanje: dober (rabljeno), Leto izdelave: 1995, Formatna krožna žaga Duodpjy A I Nrjfx Abtju Proizvajalec: Martin Tip: T72 Leto izdelave: 1995 - Po vklopu stroja potrebuje prikazovalnik na upravljalni enoti približno 15 minut, da se kaj prikaže. - Manjka ploščati jermen za predrezilo. Potrebno ga je zamenjati. - Pnevmatsko vpenjanje vzporednega prislona ne drži. Dolžina sani: 3.300 mm Širina reza: ca. 1.200 mm Višina reza: ca. 170 mm Največji premer žaginega lista: 500 mm Moč: 5,5 kW Število obratov: 2.800 / 4.000 / 5.500 obr/min Predrezilo: Da Zavorni motor: Da

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1994, delovna širina: 240 mm, višina skobljanja: 160 mm, širina skobljanja: 240 mm, delovna višina: 160 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, največja hitrost vrtenja: 6.000 obr/min, vrtljajska hitrost (min.): 6.000 obr/min, višina obdelovanca (maks.): 160 mm, priključek za stisnjen zrak: 6 letvica, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 111 A, Ponujamo generalno obnovljen stroj za skobljanje in profiliranje OTTO MARTIN T 90, letnik 1994. Tip: T 90 Serijska številka: V 215410 Letnik izdelave: 1994 Delovna širina: 240 mm Delovna višina: 160 mm Število obratov: 6000 obr/min Napetost: 400 V Frekvenca: 50 Hz Število faz: 3 ~ Nazivni tok: 111 A Delovni tlak: 6 bar Duedpfx Ajyq D Ifobtju Če imate vprašanja ali potrebujete dodatne informacije, nam pošljite sporočilo ali nas pokličite.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1981, številka stroja/vozila: 116680, Funkcionalnost: popolnoma funkcionalen, Connection rating: 380V 11A Planing width: 630 mm Planing height: 250 mm Feed rate: 8–20 m/min Suction nozzle: 160 mm Weight approx. 870 kg Rubber-coated infeed and outfeed rollers Djdpfx Aoh U A Evjbtjuu Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Leto izdelave: 1979, stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° Dujdpfehfufgjx Abtou -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Leto izdelave: 2000, stanje: dober (rabljeno), Pritiskalna prečka za krožno žago za pritrjevanje plošč ali furnirjev za 3 m drsni voziček. Dedpfx Abetxirfsteuu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connection: 80 and 120 mm INCLUDES: Laser cut-line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note for used machines: Dodpfx Abjxzfqbstjuu • Errors in technical details and prior sale excepted. • Stated prices are ex location – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen with no warranty or guarantee of any kind. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address & phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: V 453572, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.770 h, moč: 6 kW (8,16 KM), vhodna napetost: 400 V, vhodni tok: 19 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, premer vretena: 30 mm, vrtilni razpon: 90 °, nastavitev vzdolžnega vodila: poganjan z motorjem, vrsta aktuacije: električni, največja hitrost vrtenja: 9.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, širina mize: 900 mm, dolžina mize: 2.405 mm, skupna dolžina: 3.000 mm, skupna širina: 1.260 mm, skupna višina: 1.800 mm, skupna masa: 1.300 kg, leto zadnje generalne obnove: 2026, Oprema: CE označba, Martin T26 DuoControl Spindle Moulder 5/6 kW (6.8/8.2 HP) - 400 V, 50 Hz with neutral conductor, CE-compliant configuration with 2-axis control for spindle height and fence positioning, electromechanical tilt adjustment with digital display, including swiveling control panel with CPS Gamma V safety system *with 40 mm / 160 mm long milling arbor // Table size: 2405 mm x 900 mm // Table height: 900 mm // Table openings: electrical adjustment 70 mm - 220 mm // Weight: 1300 kg // Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm with quick-action belt tensioning system // Displays: electric speed display digital (LED) display for spindle height (absolute and relative), as well as tilt angle automatic correction value display for milling depth dual hour meter for total and batch operating hours // Milling spindle: electrically tiltable +/- 45.50° via button, electric height adjustment with rapid and fine feed, steep taper SK 40, Dornfix quick change system including torque wrench maintenance-free electric braking Electro-pneumatic locking via selector switch // Spindle travel: 150 mm at 5/6 kW and 7.5 kW, 125 mm // Milling fence: Dedpfezamwusx Abtouu Aigner integral fence Milling jaws made of hard-coat aluminum, with mountings for profile board or guide rail Handwheel adjustment with mechanical digital counters Infeed jaw adjustable separately Max. tool diameter: 250 mm // Extraction system: Extraction port 120 mm diameter at the fence Extraction port 120 mm diameter under table // Maintenance equipment: Central lubrication via pump Spindle lubrication via grease quantity controller 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil gun 1 x grease gun filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x FRS95 arc guard for work on the guide ring, with extraction port and feed strip // Electrical equipment: Lockable main switch, automatic star-delta starter, wear-free electric brake Contact for extraction system control, undervoltage release, CEE torque socket for feed unit (5-pin socket) Selector button for direction of rotation, motor protection switch, and winding protection BG inspection certificate no. 991002 GS-certified for wood dust no. 991001 EC type-tested no. 991003 Additionally: 1 x electrically adjustable table opening 1 x support for swiveling feeder mount with motorized height adjustment with control panel 1 x extension for pull-out table width

Stanje: rabljeno, Dolžina vozička: 2500 mm Širina reza na vzdolžnem prislonu: 1000 mm Širina reza na prečnem prislonu: 2800 mm Globina reza: 120 mm Predrezilo: ne Višinsko nastavljanje žaginega lista: ročno kolo Dujdpfsy S Rq Djx Abtou Nagibno nastavljanje žaginega lista: ročno kolo Nastavljanje vzdolžnega prislona: ročno Prikaz kota žaginega lista: skala Prikaz višine reza: - Prikaz vzdolžnega prislona: skala Prikaz prečne letve: skala Premer žaginega lista: max 400 mm Št. obratov: 2800 / 4000 / 5500 Moč motorja: 5,5 kW Priključek za odsesavanje: 120 mm Dolžina stroja: 3000 mm Širina stroja: 1800 mm Teža: pribl. 1300 kg

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s Djdpfx Abeqlck Netouu • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: Dsdpfx Aboqlckpsteuu It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension Duodsv Erkaspfx Abtou T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW Dodpfx Aeqlclbsbteuu The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Leto izdelave: 1982, Vključno s povsem novim stikalom zvezda-trikot (Stern-Dreieck-Schalter) rabljeno v dobrem stanju očiščeno preverjeno delovanje prenovljeno Izdelovalec: Martin Tip: T23 Leto izdelave: 1982 Št. stroja: 82468 Motor, ojačana moč kW: 4,7 / 5,7 nagibno od do: 0 - 45 ° motorna / mehanska zavora: nožna zavora Motor, 2 hitrosti / preklopno število polov: da Število obratov/min: 3 / 4,5 / 6 / 9000 Možen obrat desno-levo: da Velikost mize d x š mm: 1100 x 950 Premer vretena za rezkanje mm: 30 Rezkalni naslon z natančno nastavitvijo: da Vtičnica za podajalni aparat: da Priključek za izpuh mm: 100 / 120 Potrebni prostor pribl. d x š x v mm: 1100 x 950 x 1100 Teža pribl. kg: 1000 Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nezapakiran Predaja v obstoječem stanju kot ogledano Dedpfx Abozbc D Heteuu brez garancije ali jamstva

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Robust tilting spindle moulder T 26, tiltable from -45 to +45 degrees Pole-changing drive motor 5 / 6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilt angle is shown in the top display and can then be set at the stop, allowing for settings based on drawings Four speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Comfort fence T226 with digital displays for total adjustment and individual infeed jaw, as well as input for cutter diameter—in this case, the cutting depth is calculated automatically Fence with lifting device, swivels out of the way (for curve milling operations) Table extensions left and right with pull-out workpiece support Support can be extended by 700 mm Table length approx. 2400 mm Fold-away fence for slot milling Workpiece pressure device Aigner Centrex Original Martin cast jaws left 500 mm, right 500 mm with two insert rulers 3-roller power feed HolzHer ET117, with 8 speeds, forward/reverse, new rollers Feeder socket can be switched from the control panel Comfort stand with electrically height-adjustable feeder support, which can be swung away for machine setup and then simply locked back in place. Extraction port 2 x 120 mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly repainted (special colour RAL1015) V-belt replaced Operating manual CE mark Duedpfx Abszbm Tfeteu Dimensions approx. 3000 x 1500 x 1830 mm (LxWxH). Weight approx. 1800 kg. The machine can be demonstrated on site by prior appointment. We only offer machines that are ready for demonstration in our warehouse; see “more offers from this supplier.”

Stanje: rabljeno, Skobeljni stroj MARTIN T51 - rabljeno - tihi robovi miz, vodilni trak, motorna zavora ----- Tehnični podatki ----- širina skobljanja: 51 mm, Djdpfxjxm R Upe Abtjuu dolžina mize: 2.520 mm, maks. odvzem: 16 mm, premer valja: 120 mm, število nožev: 2 kosa, nastavljiv kot vodila: 0-45°, priključek za odsesavanje: 140 mm, moč motorja: 4,8 kW

Stanje: rabljeno, Leto izdelave: 1981, Delovna širina: 510 mm Skobeljni valj: segmentno rezilo Dujdpey Hqdgsfx Abtsu Število nožev: 2 Dolžina poravnalne mize: 2600 mm Nastavitev poravnalne mize: hidravlično / nožni pedal Nastavitev konkavno-konveksnega spoja: da Prikaz odstranitve ostružkov: skala Prikaz konkavno-konveksnega spoja: skala Kot paralelnega prislona nastavljiv: da Moč motorja: 5,5 kW Zavoro motorja: da, avtomatska Dolžina stroja: 2600 mm Širina stroja: 1000 mm Teža: 1050 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, moč: 8 kW (10,88 KM), vrtilni razpon: 45 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, Zasučna mizna rezkalnica MARTIN, tip T23, vreteno premera 30 mm, zasučna os vretena, razširitev mize levo in desno. Dodpezakl Ajfx Abtouu

Stanje: rabljeno, Leto izdelave: 1979, Delovna širina: 630 mm Višina skobljanja: 220 mm Skobljična glava: tračni noži Djdpfxsy A Hido Abteuu Število nožev: 4 Nastavitev višine: ročni obroč Prikaz debeline skobljanja: skala Hitrost podajanja: brezstopenjska Vhodni valj: guma Izhodni valj: guma Namizni valji: ne Moč motorja: 5,5 kW Priključek za odsesavanje: 160 mm Dolžina stroja: 1200 mm Širina stroja: 1200 mm Teža: 1000 kg

Stanje: dober (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodni tok: 11 A, širina skobljanja: 630 mm, premer orodja: 120 mm, število rezil: 4, vrsta aktuacije: ročni, Thickness Planer Planing Machine Thicknesser MARTIN Model: T41 Planing width approx. 630 mm Pass-through height approx. 250 mm 4-knife cutterblock (clamp-type safety cutterblock) Continuously adjustable feed speed: 8–20 m/min. Segmented pressure bar Rubber infeed and outfeed rollers Extraction connection: 140 mm Dimensions: 1000 x 1100 x 1200 mm Soft start control Condition: See pictures and please refer to the item description. Parts can also be picked up by the buyer. All dimensions are approximate. All details given to the best of our knowledge, but without guarantee. Subject to prior sale. Shipping costs are indicative only; actual costs may vary depending on distance and unloading options. Items can be collected by the buyer or shipped at the buyer’s expense. Offered under the differential taxation scheme. The listed sales price is the total gross amount. No VAT will be shown separately on the invoice. Dsdpfxoy Ahtqe Abtsuu You will receive an invoice according to §25 UStG (German VAT Act). Warranty terms: Due to wear and tear on used parts, items are generally sold as defective/for spare parts only to commercial buyers. By placing a bid, the buyer accepts this as the basis of the sales agreement. If the offered item is used, warranty is 12 months if the buyer is a consumer as per §13 BGB (German Civil Code). If the buyer is a business within the meaning of §14 BGB, any warranty is excluded. If the offered item is new, warranty is 24 months for consumers as per §13 BGB; for business customers as per §14 BGB, warranty is 12 months.

Stanje: rabljeno, očiščeno, funkcionalno preizkušeno Stroj obnovljen, Pogonski sklop podajalnika obnovljen Pogonski jermen nov Segmenti podajalnih valjev obnovljeni Stroj popolnoma nastavljen, Poskusno skobljanje z vzorcem rabljeno, v odličnem stanju Znamka Martin Tip T 41 Širina skobljanja cca 630 mm Višina skobljanja cca 250 mm Segmentirana pritisna letev Djdpfxsyu U Eio Abtsuu Gumirani podajalni valj Podajanje brezstopenjsko 8–20 m/min Število nožev 2 kosa Priključek za odsesavanje D 140 mm Potrebni prostor cca 1000 x 1100 x 1200 mm Teža cca 1000 kg Skladišče: 97447 Gerolzhofen, prost naložitev, nepakirano Predaja v trenutnem stanju kot je bilo videno, brez garancije in jamstva.

Stanje: dober (rabljeno), Leto izdelave: 1995, širina skobljanja: 630 mm, vrsta nastavitve višine: električni, število rezil rezkalnika: 4, višina skobljanja: 250 mm, Oprema: motorna zavora, ⭐ MARTIN Thickness Planer T44 – 7.5 kW – Tersa – Digital Display – Electric Thickness Table – Top Industrial Quality ⭐ For sale is a high-quality Martin T44 thickness planer from German industrial production – renowned for its exceptional smoothness, precision, and durability. This machine is ideal for professional joineries, timber construction companies, or demanding workshops seeking a reliable heavy-duty machine. ✅ Technical Data & Features: +Manufacturer: MARTIN +Model: T44 +Planing width: 630 mm +Planing height: 2.8 – 250 mm +Year of manufacture: 1995 +Motor power: 7.5 kW (powerful industrial motor) +Tersa cutterhead system – rapid knife changes without adjustment +Digital thickness table readout for precise processing +Electric thickness table adjustment +Heavy, low-vibration, cast iron construction +Rubber-coated outfeed roller +Central lubrication system +Very clean planing result and smooth operation ️ Condition: +Well-maintained used machine from active operation +Technically flawless +Ready for immediate use +Wear consistent with age present Viewing & test run possible by arrangement – machine can be tested on site. Price: €8,900 net Location: 39340 Haldensleben Dsdpjyh I Etefx Abtsuu Freight shipping available

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: V165126, Funkcionalnost: popolnoma funkcionalen, Naprodaj je visokokakovostna formatna krožna žaga znamke Martin (Otto Martin Maschinenbau, izdelano v Nemčiji) – robusten in vzdržljiv profesionalni stroj za mizarje in tesarje. Proizvajalec: Martin Letnik: cca 1989 Žagin list: Ø 200–450 mm Hitrosti: 2800 / 4000 / 5500 obr/min Napetost: 380 V / 50 Hz S stabilnim pomičnim vozičkom Paralelni in prečni prislon prisotna Priključek za odsesavanje prisoten Stanje: Rabljeno, vendar popolnoma funkcionalno Običajni znaki uporabe (glejte slike) Dujdey D Iyajpfx Abtsu Zelo robustna industrijska kvaliteta – ni izdelano za hobi uporabnike Ogled in preizkus po dogovoru možen. Idealno za mizarsko delavnico, obrt ali zahtevnejšo lesno obdelavo. Lokacija: 45356 Essen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, I am selling a sliding table saw with scorer Manufacturer: OTTO MARTIN Model: T60 Classic Year of manufacture: 2007 Cutting length: 3200 mm Duodpfx Abotmwn Hjtsu Cutting width: 1250 mm (optional) Maximum cutting height: 130 mm (blade diameter 400 mm) Blade and scorer tilting: 0-46° digital Blade and scorer height adjustment: digital Digital display for parallel fence and working height Main saw blade and scorer can be switched on from the control panel. Main motor: 5.5 kW sliding table saw (7.5 HP) (speed adjustable: 4000/4800/6000 rpm) Scorer motor: sliding table saw Tools, options, and accessories as shown in the pictures are included in the price. Very good condition. Available immediately. Includes complete documentation and CE certificate.

Stanje: rabljeno, Leto izdelave: 1981, rabljeno, v dobrem stanju očiščeno, podmazano delno obnovljeno popolnoma nastavljeno deli obnovljeni Proizvajalec: Martin Tip: T 70 Leto izdelave: 1981 Št. stroja: V-112873 GS testirano Dsdpfx Aswkvw Tobtsuu Motor: 4,8 kW Jeklene vodilne tirnice Dolžina reza cca 2700 mm Nastavljiv do 45° Paralelogramska zaščita Podaljšek mize Višinska nastavitev hidravlična Nagibna nastavitev hidravlična Kotno vodilo Priključek za odsesavanje D 120/80 mm Potreben prostor cca 2800 mm x 3400 mm x 1200 mm Teža cca 1000 kg Lokacija skladišča: 97447 Gerolzhofen, prost naložen, brez embalaže Predaja v obstoječem stanju kot vidno, brez garancije ali jamstva