Makino nakup rabljenega (37)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 900 mm, pomik osi Y: 800 mm, pomik po osi Z: 970 mm, obremenitev mize: 1.200 kg, največja hitrost vretena: 12.000 obr/min, TEHNIČNE PODROBNOSTI Pomik po X-osi: 900 mm Pomik po Y-osi: 800 mm Pomik po Z-osi: 970 mm Hitrost vretena: 12.000 obr/min Razdalja med središčem vretena in zgornjo površino mize: 100 – 900 mm Razdalja med glavo vretena in središčem palete: 70 – 1.040 mm Vpenjalni nosilec vretena: HSK 100 Velikost mize: 630 x 630 mm Obremenitev mize: 1.200 kg Maks. premer obdelovanca: 1.000 mm Maks. višina obdelovanca: 1.300 mm Izmenjevalnik orodij: 90 Minimalna nastavitvena velikost: 0,001 mm Plazeča podajalna hitrost: 1 – 4.000 mm/min (23 stopenj) Rezkanje podajanja: 1 – 50.000 mm/min Hitri premik: 50.000 mm/min Čas menjave palet: 17 s PODROBNOSTI O STROJU Električni podatki Obratovalna napetost: 400 V, 3 faze, 50 Hz Skupni tok: 98 A Presek dovodne žice: 35 mm² Prekinitev dovoda: 100 A Itodpfx Adexyiirokod Opomba: Za prevoz sta potrebna 2 tovornjaka.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.500 kg, potovalna razdalja osi X: 600 mm, pomik osi Y: 400 mm, pomik po osi Z: 260 mm, skupna višina: 2.350 mm, skupna dolžina: 2.500 mm, skupna širina: 2.300 mm, višina obdelovanca (maks.): 260 mm, širina obdelovanca (maks.): 650 mm, dolžina obdelovanca (maks.): 940 mm, skupna masa: 6.000 kg, CNC wire-cut EDM machine in very good condition. Fully inspected by Makino service technicians. The machine has been cleaned, and all pumps have been checked, fitted with new bearings, and sealed. Itodowww Nqepfx Adked

Stanje: rabljeno, Leto izdelave: 1994, Table length 750 mm Table width 550 mm Amperage 60 A Controller Makino MGE20 X-axis travel 600 mm Itodpfx Adevxwygoked Y-axis travel 400 mm Z-axis travel 250 mm Workpiece weight 450 kg Tool changer 8 positions Machine weight approx. 5.00 t Space requirement approx. 3.00 x 3.50 x H3.00 m Die-sinking EDM machine with MAKINO MGE20 control, 8-position electrode changer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 80-4011-0011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 950 mm, število mest v zalogovniku orodij: 188, največja hitrost vretena: 12.000 obr/min, Spindle replaced in 2023! TECHNICAL DETAILS Control: FANUC Pro-3 X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 950 mm Feed X/Y/Z axis: 1 – 50,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min B-axis: 360 x 0.001° Spindle and Drive Tool holder: HSK-A 100 Speed: 20 – 12,000 rpm Spindle motor: 25 / 30 kW Milling spindle torque: 420 Nm Spindle diameter at front bearing: 110 mm Table and Workpiece Itsdsv Sutkjpfx Adksd Pallet size: 2x 800 x 800 mm Max. table load: 1,800 kg Workpiece size: 1,000 x 950 mm Workpiece height: 1,000 mm Tool Magazine Number of slots: 188 Tool length: 475 mm Tool diameter: 320 mm Max. tool weight: 20.00 kg MACHINE DETAILS Total power requirement: 65.00 kW Machine weight: 30.00 t Space requirement: 8.00 x 5.30 x 3.50 m Control operating hours: > 100,000 h Automatic mode hours: 8,026 h Feed time: 31,905 h Part counter: 84,416 EQUIPMENT - Horizontal machining center with FANUC Professional 3 control - NC rotary table - Electronic handwheel - Chip conveyor - Coolant filter KNOLL VRF450/2300 - Through-spindle coolant - 188-position tool magazine

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), Makino SP 43 CNC Control: MGW-R Iedpfx Adsiv H Dqskstd Travels: X-axis: 450 mm Y-axis: 300 mm Z-axis: 320 mm U/V-axis: +/- 101 mm Table size: 730 x 580 mm Tank size: 890 x 850 mm Max. workpiece weight: 900 kg Approx. dimensions (L x W x H): 3000 x 3000 x 2300 mm Approx. weight: 3400 kg

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Makino EU 64 wire EDM machine X = 600 mm Y = 400 mm Itsdpfxsgwp Eqo Adkjd Z = 260 mm Max. workpiece dimensions (W x D x H): 940 x 650 x 260 mm Max. workpiece weight: 1,500 kg Service required before commissioning!!! The current Makino service report can be provided upon request.

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Pallet size: 400 x 400 mm Number of pallets: 15 Table load capacity: 400 kg Machine weight approx.: 0.060 t Space requirement approx.: 0.4 x 0.4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots available. Isdpfx Adsvc Adlekstd

Leto izdelave: 2018, stanje: rabljeno, We are selling an as-new/unused but defective tool magazine with tool changer for a Makino PS 95. The magazine was damaged by a crane hook while unloading the machine from the transport crate. The cast part is broken off at the top, and a few tool pockets are damaged. It can be repaired or used as a source of spare parts. Iodpfxsvfdvbe Adkjtd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 21.109 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 550 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: Fanuc, največja hitrost vretena: 20.000 obr/min, število mest v zalogovniku orodij: 80, TECHNICAL DETAILS Travel X-axis: 550 mm Travel Y-axis: 1,000 mm Travel Z-axis: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table size: Ø 500 mm Table size with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control System Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool pockets: 80 pcs Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A-/C-axis: 18,000°/min (corresponds to 50 rpm) Feed Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Feed A-/C-axis: 12,000°/min (corresponds to 33.3 rpm at max. 500 kg) Feed A-/C-axis: 18,000°/min (corresponds to 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of: 30.04.2025) Power-on time: 41,624 h Operation time: 21,877 h Machining time: 16,829 h Spindle hours: 21,109 h Ijdpfx Asw Stpujdkjtd EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive control options for Fanuc - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing - Manual cleaning pistol - External coolant with 3 nozzles 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: nepreverjeno, številka stroja/vozila: 80.4055.0109, teža obdelovanca (maks.): 1.000 kg, potovalna razdalja osi X: 450 mm, pomik osi Y: 350 mm, pomik po osi Z: 360 mm, širina mize: 700 mm, skupna masa: 9.000 kg, dolžina mize: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM (Electrical Discharge Machine) Itedswww Sxopfx Adkjd Control system: Makino MGF / MGF-20 / MGF-60 – robust and widely used in the industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg C-Axis: full rotation – ideal for rotary electrodes

Stanje: dober (rabljeno), Leto izdelave: 1998,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, CNC Control: Professional 5 (FANUC) X mm: 550 Y mm: 1,000 Z mm: 500 B mm: 150 C degrees: 360,000 Number of pallets: - Table dimension mm: ø500 Table load capacity kg: 350 Cutting feed mm/min X,Y,Z: 32,000, 40,000, 40,000 Max. rapid traverse m/min X,Y,Z: 48, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 / 15 Taper type: HSK63 Torque Nm: Tool changer type: chain Tool positions in changer: 317 Max. tool diameter mm: 90 Max. tool diameter with adjacent positions empty: 140 Max. tool length mm: 300 Max. tool weight kg: 8 Coolant tank capacity l.: - Through-spindle coolant bar: yes Equipment: Rotary table with digital units Itodpfx Adoxmgcpoked Work light Through-spindle coolant Electronic handwheel Dimensions: Length mm: 2,771 Width mm: 3,948 Height mm: 3,264 Weight kg: 12,400