Anayak Cnc nakup rabljenega (36)

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), številka stroja/vozila: VH-7360, a pre-owned, well-maintained CNC bed-type milling machine with Heidenhain control, HURON head, hydraulic tool clamping system, coolant system, central lubrication, lighting, new TFT monitor. Travel X/Y/Z: 1600/800/650 mm Spindle taper: SK 50 Spindle speed: 60-1800 rpm Feed rate: 10-3000 mm/min Rapid traverse: 10 m/min Table clamping surface: 1800 x 610 mm Machine weight: 9500 kg Table load capacity: 3000 kg Hnjdpfxsdzy Uye Ah Dsu

Leto izdelave: 1995, Stanje: dober (rabljeno), Travels: x = 1600 mm y = 800 mm z = 900 mm Hsdpfx Aoh Nuhrjh Djnu Maximum spindle speed: 2,000 rpm Control: HH 407 A Z-axis cover is present but defective.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, ANAYAK HVM 3800 Fahrständer-Fräsmaschine mit Tisch Baujahr: 2007, sehr gepflegt. CNC-Steuerung: HEIDENHAIN iTNC 530 Technische Daten: X-Achse (längs): 3200 mm Y-Achse: 1500 mm Z-Achse: 2000 mm Tischbelastung: 25 t Spindelaufnahme: ISO 50 DIN 69871 Hnodpfx Ahohlqiuj Dsu Spindeldrehzahlen: 4.000 U/min Fräskopf indexierbar: 2,5° B- und C-Achse jeweils Antriebsleistung: 30 kW, 2-Gang-Getriebe Kühlmittelzufuhr

Stanje: rabljeno, CNC Travelling Column Boring and Milling Machine ANAYAK Type HVM-3800-P Bed Type Milling Machine, design similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 Travels X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size 3800 x 1200 mm T-slots 8 pieces, 22 mm width, 130 mm spacing Table load capacity max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper ISO 50 (DIN69871-A) (Pull stud DIN 69872-B) Hnjdpfx Ahjxcgtgj Dsu Spindle speed 60–4000 rpm, infinitely variable Feed rate up to 10,000 mm/min, infinitely variable Rapid traverse X + Y 20 m/min Rapid traverse Z 10 m/min Spindle drive 22 / 30 kW Power supply 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal head, fully automatic swiveling in two 45° planes – B + C axis - HEIDENHAIN iTNC 530 control with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting - Freestanding control cabinet - Chip conveyor inserted between travelling column bed and machine table - 32,078 operating hours displayed - Coolant system - Freestanding hydraulic unit - Operating manual with wiring diagrams Machine footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 tons Good condition Direct from location Kassel, EXW loaded – immediately available

Stanje: dober (rabljeno), EN Hodpfx Aop S S Txsh Donu

Stanje: dober (rabljeno), Leto izdelave: 2000, potovalna razdalja osi X: 4.300 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.460 mm, širina mize: 2.130 mm, obremenitev mize: 40.000 kg, dolžina mize: 5.000 mm, X-axis: 4300 mm Y-axis: 1200 mm Z-axis: 1460 mm Table length: 5000 mm Table width: 2130 mm Table load capacity: 40,000 kg Spindle power: 22/30 kW Spindle speed: 60 – 3,000 rpm Tool holder: ISO 50 / BT / MK X-axis feed rate: 10,000 mm/min Hodpfxowrcydo Ah Donu Y-axis feed rate: 10,000 mm/min Z-axis feed rate: 10,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 10,060 mm Width: 9,100 mm Height: 3,990 mm Weight: 40,000 kg

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), ANAYAK VH 2200 CNC Bettfräsmaschine (Baujahr 2000) Heidenhain 426 Verfahrweg X: 2000 mm Verfahrweg Y: 920 mm Verfahrweg Z: 900 mm Tischgröße: 2200 x 700 mm Werkstückgewicht: 3000 kg Spindelleistung: 22,5/34 kW Spindeldrehzahl: 3000 U/min Vorschub: 5 m/min Eilgänge: 15 m/min Hodpfxsu T Il Rj Ah Djnu Maschinengewicht: 12 Tonnen

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, ANAK – MATIC 7 CNC – 3-Axis Machining Centre | HEIDENHAIN TNC 426 | 1000 x 500 x 505 mm. Hnedpfxokuz I Ns Ah Dsu Compact and efficient CNC machining centre, ideal for precise 3-axis milling operations. Equipped with HEIDENHAIN control and a high-speed spindle. 🛠 Technical specifications: • X-axis travel: 1000 mm • Y-axis travel: 500 mm • Z-axis travel: 505 mm • Main spindle: 7.5 kW – 6000 rpm • CNC control: HEIDENHAIN TNC 426 • Number of axes: 3 • Table dimensions: 1150 x 475 mm • Machine weight: 5000 kg ✅ Ideal applications: • Production of small and medium-sized components • Subcontract machining workshops • Moulds, tooling, general machining 📌 Available for immediate delivery. Reliability and precision with HEIDENHAIN control, in a robust and versatile machine.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 8.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 2.500 mm, največja hitrost vretena: 3.000 obr/min, največja hitrost vrtenja: 3.000 obr/min, vrsta vhodnega toka: trifazni, dovod hladilne tekočine: 15 letvica, moč vretenovega motorja: 33.000 W, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: 430 CA, moč: 0,033 kW (0,04 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, ANAYAK HVM 9000 – CNC Moving Column Milling Machine | 8300 mm X Travel | Refurbished Large CNC milling machine fully refurbished in workshop, ideal for machining large workpieces, heavy-duty applications, and guaranteed precision. Equipped with HEIDENHAIN control and numerous technical upgrades. 🛠 Main Technical Specifications: • X-axis travel: 8300 mm • Y-axis travel: 2000 mm • Z-axis travel: 2500 mm • Spindle head: 33 kW – 3000 rpm • Spindle taper: ISO 50 DIN 69871-B • Automatic tool changer: 30 positions • Additional axes: automatic B and C axes • CNC control: HEIDENHAIN TNC 430 CA • Internal cooling: 50 l/min at 15 bar • External cooling: 100 l/min 🔧 Complete retrofit performed: • Grinding and alignment of Y-axis and column guideways • Replacement of bearings, pinion and spindle head gears • Renovation of electrical cabinet and motor wiring • New bellows, drag chains, and transmission system • Machine fully tested, documented, and ready for operation. ✅ Ideal Applications: • Machining of large structures • Heavy industry and energy sector • Railway, wind power, shipbuilding, or large mold manufacturing industries 📌 Available for immediate delivery. Hjdpfx Aoqpd D Ijh Donu Power, reach, and precision in a single machine.

Stanje: rabljeno, Leto izdelave: 2006, BAZ Anayak Anak Matic 13 leto 2006 Hnjdsxn Rl Rspfx Ah Dju Stroj si je mogoče ogledati pod napetostjo.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Funkcionalnost: omejena funkcionalnost, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 920 mm, pomik po osi Z: 900 mm, dolžina podajanja os X: 15.000 mm, dolžina pomika po osi Y: 15.000 mm, dolžina podajanja os Z: 15.000 mm, Technical Machine Description – CNC Brand: ANAYAK Model: VH-2200 Category: CNC Milling Machine Year of Manufacture: 2002 CNC Control: SELCA S3045 Machine Weight: 10,000 kg Machine Dimensions: Length: 4,960 mm Width: 3,535 mm Height: 3,080 mm Spindle Technical Features Taper Size: ISO 50 Tool Holder Type: DIN69871-A50 Tool Shank Type: DIN69872-B50 Spindle Speed: 60 ÷ 3,000 rpm Hnedpfxsxfa Ayj Ah Deu Spindle Motor Power (cont./30 min): 22/33 kW Multi-Angle Head: 45° Angular Positioning axis B, axis C: Manual Working Capacity X-axis Travel: 2,000 mm Y-axis Travel: 920 mm Z-axis Travel: 900 mm Distance Spindle Center to Column: 810 mm Table Dimensions: 2,200 × 750 mm Load Capacity: 3,000 kg Number of T-slots: 6 T-slot width: 18 mm Distance between T-slots: 120 mm Feed Rates Rapid Feed X/Y/Z: 10,000 mm/min Working Feed X/Y/Z: 3,000 mm/min Additional Information Machine without tool changer, complete with accessories and manuals.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 14.900 h, Krmilna enota Znamka: HEIDENHAIN Model: TNC530 Glavni pogon Število osi: 3 Pomiki Pomik X-osi: 2500 mm Hnsdpfx Aoxfcm Ieh Dju Pomik Y-osi: 1000 mm Pomik Z-osi: 1000 mm Miza Nosilnost mize: 6000 kg Ta 3-osni stroj ANAYAK Performer 2500 je bil izdelan leta 2007. Opremljen je s krmilno enoto Heidenhain TNC530, univerzalno glavo za rezkanje EMENA-VAR-3 in robustno mizo velikosti 2700 x 850 mm. Stroj omogoča obremenitev mize do 6 ton ter pomike 2500 mm v X, 1000 mm v Y in 1100 mm v Z smeri. Če iščete zanesljive in kakovostne rešitve za rezkanje, razmislite o nakupu naše naprave ANAYAK Performer 2500. Za dodatne informacije nas kontaktirajte. Področja uporabe: Rezkanje

Stanje: rabljeno, Leto izdelave: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm Clamping table surface 2200 x 750 mm Table load capacity 3 t Number of T-slots 6 T-slot width 18 mm T-slot spacing 120 mm Spindle taper ISO 50 DIN 69871-B Max. spindle speed 3000 rpm Gear stages 1 Infinitely variable speed range 1: 60 - 3000 rpm Machine weight approx. 21.6 t Feeds - longitudinal/cross/vertical: 0 - 5000 mm/min Rapid traverse: 15,000 mm/min Total power requirement: 38 kW Machine weight approx. 11 t Hedpsg E Utxofx Ah Dsnu Drawbar according to DIN 69872-B | ICS Operating hours: Control on: 43,036 h Machine on: 41,311 h Program run: 13,894 h Machine has already been dismantled.

Stanje: dober (rabljeno), Leto izdelave: 2001, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.460 mm, dolžina mize: 3.800 mm, širina mize: 1.000 mm, obremenitev mize: 30.000 kg, Chip conveyor Double doors on the front side Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant system 16 bar and 2.2 kW, flow rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Table load capacity: 30,000 kg Spindle power: 41 kW Hnjdpfoxc Hh Dox Ah Dou Spindle speed: 3,000 rpm Tool holder: ISO 50 / BT / MK Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Auto-indexing milling head: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all important details.

Stanje: dober (rabljeno), Leto izdelave: 2008, Pomiki X Y Z: 3000 x 1300 x 2000 mm, Miza: 2000 x 1600 mm, Hnodpfxjvz A Rij Ah Dsu Nosilnost mize: 13.000 kg, Os B: 360 stopinj, Heidenhain iTNC530, Vreteno s stožcem ISO SK50, Hitrost vretena: 5.000 obr./min., Izmenjevalec orodij za 60 orodij, Hladilni sistem, varnostne zaščite z medlocko.

Stanje: dober (rabljeno), Leto izdelave: 1994, 🔧 NA PRODAJO – Rezkalni stroj ANAYAK ANAK MATIC 9 🔧 📍 Na voljo takoj: stroj v odličnem stanju, pripravljen za uporabo v vaši delavnici! Hjdpsxc H N Ujfx Ah Donu 📌 Glavne značilnosti: ✅ Znamka: ANAYAK ✅ Tip: CNC REZKALNI STROJ ✅ Model: ANAK MATIC 9 ✅ Leto: 1994 ✅ Poreklo: Španija ✅ CNC: HEIDENHAIN 📸 Poglejte dejansko fotografijo spodaj (možen ogled stroja na lokaciji) 📦 Stanje: Zelo dobro 💰 Cena: po dogovoru Nahaja se v Franciji Na voljo: 3 stroji 👉 Za več tehničnih informacij, dodatne slike ali ogled nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 1996, skupna višina: 3.200 mm, skupna širina: 3.200 mm, skupna dolžina: 8.000 mm, Unladen weight: 26,000 kg Price: On request Milling machine, bed-type milling machine, bed mill Model: CNC Manufacturer: Anayak Type: FBZ-HV-2500 CNC: Heidenhain Year of manufacture: 1996 Bed dimensions: 4500 x 800 mm X-axis travel: 4000 mm Y-axis travel: 935 mm Z-axis travel: 1000 mm Swiveling milling head Spindle speed: 3000 rpm Spindle taper: ISO 50 Including accessories, documentation, etc. Disassembled for transport Video available! Machine dimensions: 8000 x 3200 x 3000 mm Machine weight: 26,000 kg - Year of manufacture: 1996 - Documentation available: Yes Hsdpfx Ahswnhnfs Donu - CE marking: Yes - Serial number: 11676-FBZ - Control type: Heidenhain - Control system: CNC - Transport dimensions: 8000 mm x 3200 mm x 3200 mm (L x W x H) - Transport weight [kg]: 26,000 kg Financial information VAT: The stated price is net, plus VAT VAT regulation/Margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Lukas van Rossum

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 8.087 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.300 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 2.000 mm, največja hitrost vretena: 5.000 obr/min, višina mize: 925 mm, La máquina ha sido completamente revisada; se han reacondicionado la cabeza de fresado y la cubierta telescópica del eje X. Además, se ha renovado el panel de control y las puertas de policarbonato, y la máquina se ha limpiado a fondo. DETALLES TÉCNICOS Recorridos Eje X: 5.300 mm Eje Y: 1.500 mm Eje Z: 2.000 mm Eje A: +45° a −225° Eje B: +165° a −18° Datos del husillo Rango de velocidad del husillo: 60 – 5.000 rpm Portaherramientas: SK 50 DIN 69871 Diámetro exterior del husillo (cojinete delantero): 140 mm Paso del husillo: 90 mm Dimensiones de la mesa Superficie de sujeción: 6.000 × 1.200 mm Altura de la mesa: 925 mm Avance de trabajo: 10 – 6.000 mm/min Rápidos (X & Y): 15.000 mm/min Rápidos (Z): 10.000 mm/min DETALLES DE LA MÁQUINA Control Fabricante del control: HEIDENHAIN Hnjdsxbd A Nspfx Ah Dou Modelo de control: TNC 530 Horas de funcionamiento Horas del husillo: 8.087 h Horas de encendido del control: 3.785 h Horas de encendido de la máquina: 30.238 h Nota: La máquina ya ha sido desmontada.

Leto izdelave: 2001, obratovalne ure: 27.046 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CNC travelling column milling machine, cast iron construction Extremely robust design thanks to triple-guided X-axis and fixed table Machine will be provided EXW TECHNICAL DETAILS X-axis (Longitudinal) linear guideway: 5,300 mm (triple-guided) Y-axis (Cross) linear guideway: 1,000 mm (double-guided) Z-axis (Vertical) flat guideway: 1,500 mm (double-guided) Spindle speed range: 60 to 3,000 rpm Tool holder: SK 50 Tool changer: 40 positions Pull stud: DIN 69872-B Drive power: 30 kW Tool dimensions: max. L=350 mm / Ø=200 mm Table size: 6,000 x 1,000 mm Heidenhain control: TNC426 with colour display and handwheel Rapid traverse X, Y, Z axis: 10,000 mm/min Hjdpfx Ajlhqkhjh Djnu Clamping area: 6,000 x 1,000 mm T-slots: 22 H12 / spacing 130 mm Central T-slot: 22 H7 MACHINE DETAILS Operating hours: 62,774 (as of 11/2022) External coolant system: 1.1 kW with 50 l/min Machine weight: 43,000 kg EQUIPMENT - Heidenhain electronic handwheel - Pendulum machining capability monitored by light barriers - New X-axis covers - Twin chip conveyor - New milling head bearings (2021) - Operating manual / documentation CONDITION - Service and maintenance schedules adhered to - Geometry in good order - Suitable for pendulum machining Machine available from July-August

Stanje: rabljeno, Os X (vzdolžna): 800 mm Os Y (prečna): 400 mm Os Z (navpična): 300 mm Dolžina mize: 1340 mm Širina mize: 300 mm Maksimalna hitrost vrtenja vretena: 2500 o/min Moč motorja vretena: 3 kW Dimenzije (D x Š x V): 1800,0 × 2000,0 × 2080,0 mm Teža: 2050 kg Hedpjw Tyyiefx Ah Dsnu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 1.500 mm, hitrost vretena (min.): 6.000 obr/min, širina mize: 1.100 mm, dolžina mize: 4.200 mm, največja hitrost vrtenja: 6.000 obr/min, Krmilnik Heidenhain iTNC 530 Menjalnik orodij za 60 kosov Avtomatska univerzalna glava, 0,02 stopinje v obeh oseh Hnjdsw Ngd Topfx Ah Dsu Stroj bo obnovljen leta 2025

Stanje: rabljeno, Leto izdelave: 1986, X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Table clamping surface: 1385 x 305 mm Spindle taper: SK 40 Quill stroke: 200 mm Spindle speeds: 50 – 3500 rpm Hedpotqqpnsfx Ah Denu Control: HEIDENHAIN Model: TNC 155 Total power requirement: 5.8 kW Machine weight: approx. 2.5 t Dimensions (L x W x H): 2.25 x 2.0 x 2.4 m Accessories: electronic handwheel, coolant system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, 1 as-new CNC travelling column milling machine, fully equipped Manufacturer: ANAYAK Model: HVM 7000 PC Year of manufacture: 2007 Control system: Heidenhain iTNC 530 Hnjdpfxevy Tk De Ah Dou Technical data: Travel (X/Y/Z): 6,300 x 2,000 x 2,700 mm Clamping area: 7,000 x 3,000 mm CNC rotary table: 1,500 x 1,500 mm Tool holder: ISO 50 Spindle speed up to: 5,000 rpm Equipment / Accessories: Tool magazine: 80 stations Orthogonal milling head, deep hole drilling unit, ICS (internal coolant supply) Paper band filter, chip conveyor, touch probe Enclosure with front sliding doors Paper band filter, operator platform travels with machine Complete coolant system, electronic handwheel Deep hole drilling unit, internal cooling for deep hole drilling unit Support gearbox, cooling unit for support gearbox Rinse gun, etc.

Stanje: dober (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 1.650 mm, višina plošče: 300 mm, Manufacturer: STOLLE Type: CAST IRON... Year of Manufacture: 2004 Specifications Metric US Standard Length: 6000 mm Width: 1650 mm Height: 300 mm Number of T-slots: 6 T-slot spacing / pitch: 250 mm T-slot size: 27 mm Weight per plate approx.: 7200 kg Number of matching pieces: 4 Hedpfx Ahowpva Eo Djnu Dimensions (approx.): Length: 6000 mm Width: 1650 mm Height: 300 mm Weight: 7200 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, wherever possible, sourced from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Therefore, no warranty or contractual conditions are implied. We recommend verifying all critical details independently.