Obdelovalni center - horizontalni

MAKINO A88 b

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Dodjw Intaopfx Aplecg Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Grinding area: 2000x900mm, cross travel: 875mm, longitudinal travel: 2450mm, distance from table to spindle center: 845mm, magnetic chuck dimensions: 2000x800mm, max. table load: 2.3t, longitudinal axis feed: 1000–30,000mm/min, cross axis feed: 0.01–2000mm/min, vertical axis feed: 0.001–1500mm/min, grinding wheel dimensions: 500x100x203.2mm, grinding spindle motor power: 22kW, length: 6800mm, width: 3450mm, weight: 13t. An on-site inspection is possible. Djdpfx Aeuyk N Isplscg

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Dedpfx Apscblc Sjlocg Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 134418, merilno območje os X: 1.200 mm, merilno območje osi Y: 1.800 mm, merilno območje os Z: 1.000 mm, Oprema: Na voljo je tipska ploščica, Tehnični podatki Proizvajalec: Zeiss Tip: Accura 12/18/10 Serijska št.: 13418 Leto izdelave: 2007 Merilna plošča Merilna plošča iz trde kamnine Širina: 2.400 mm Globina: 1.700 mm Višina: 400 mm Merilno območje Os X: 1.200 mm Os Y: 1.800 mm Os Z: 1.000 mm Dodatna oprema Dedjxnruaopfx Apljcg Upravna konzola PC enota 2 x 27'' monitorja, proizvajalec BenQ Tipkovnica Miška Dodatki Skladiščeno v dvovratni kovinski omari Cena: na zahtevo! Opomba: Naša ponudba je namenjena izključno strokovnim strankam. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, navedbah in cenah ter do vmesne prodaje!)

Leto izdelave: 2014, stanje: dober (rabljeno), For sale: Nilfisk Compact Industrial Safety Vacuum Cleaner Model CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg ATEX-certified (explosion proof) Djdpfx Aehu Sf Hoplecg The vacuum cleaner is in good condition and ready for immediate use. Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality, yet affordable metalworking machine for your manufacturing operations? Or are you looking to sell your equipment? For more information or ways to contact us, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2008, Maximum swing diameter over bed: 700 mm Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 Djdpfx Apoxmirgjlecg - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 – 152 mm - Full-stroke cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X / Z / C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115 / -115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunction tools, e.g. special tool with radially arranged indexable inserts, that can be positioned in the drilling/milling spindle at 60°, 90°, 120°, and 180° - Hobbing software for straight and helical gears with speed synchronization of main and milling spindle - Electrostatic extraction system - Chip conveyor - Documentation - CE marking

Stanje: rabljeno, Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: ±180° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (between centres including clamping): 130 kg Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Required floor space approx.: 4.2 x 2.0 m Initially delivered new to a university. Taken over in 2018. Then fully serviced at BEMA and delivered to a one-man operation. The machine is currently being serviced again and the table geometry restored. 2-axis Fagor digital readout retrofitted. - Tailstock with fine adjustment - Internal grinding attachment - Coolant system Dcsdpeynmpgsfx Apleg Accessories available on request.

Stanje: zelo dobro (rabljeno), Krmilnik FANUC Professional 6 z osjo B Hodi pomikov 900 x 900 x 1020 mm Izmenjevalec orodij s 136 pozicijami Hitrost vretena 10.000 vrt/min Dodpfx Apjx A E Enoljcg Vpenjalo vretena HSK100 10 palet 630 x 630 mm Os B 0,001° Izmenjevalec palet FASTEMS FPC1500 Notranje hlajenje vretena 3D merilna tipala Nadzor zloma orodja Naprava za merjenje dolžine orodja Transporter za ostružke Razni dodatki MARCELS MASCHINEN AG

Stanje: dober (rabljeno), Leto izdelave: 2005, Horizontal Machining Center Machine Type: Mori Seiki NH 8000 DCG Control: Fanuc 18 imb + Mapps 2 Year of Manufacture: 2005 TECHNICAL DATA: Travel distances: X-axis: 1,400 mm Y-axis: 1,200 mm Z-axis: 1,200 mm B-axis: 0.001° Rapid traverse (X/Y/Z): 50 m/min Spindle speed range: 10,000 rpm Drive power: 30 / 25 kW Tool holder: BT 50 Tool changer Dcjdpfx Apev Nhylelsg Tool stations: 140 Pallet system Number of pallets: 2 Pallet size: 800 x 800 mm Machine weight: 32,000 kg Space requirements (LxWxH): 9,200 x 4,900 x 3,920 mm Equipment features: Through-spindle coolant (IKZ): bar Chip conveyor High-pressure pumps

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Dcedst Hw Rdspfx Apljg Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice