Maho 1000 nakup rabljenega (436)

Stanje: rabljeno, Leto izdelave: 1992, x-hod 1000 mm y-hod 500 mm z-hod 700 mm Miza za pritrditev obdelovanca 1250 x 700 mm Hitrost vretena 20 - 3.200 min⁻¹ Glavni pogonski motor 22 kW Hod pinole 100 mm Razdalja med glavo vretena in mizo min./max. 138/600 mm Ijdpfx Aexwdw Ssgpsa Podajalna hitrost (x/y/z) 3.000 mm/min Hitri pomik (x/y/z) 60/50/60 m/min Skupna potrebna moč 27 kW Po naši oceni se stroj nahaja v dobrem rabljenem stanju. Pribor, prikazana orodja in vpenjalne naprave so vključeni v obseg dobave le, če so to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane!

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Travelling distance: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Spindle speed: 2000 rpm, Feed rate: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, CNC control: 432, Operating hours: 70,771h. Documentation available. Iodot Tfagspfx Agpja

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 30216 & 30277, dolžina podajanja os X: 1.000 mm, potovalna razdalja osi X: 1.000 mm,

Stanje: rabljeno, Leto izdelave: 1991, X-axis travel: 1000 mm y-axis travel: 500 mm z-axis travel: 700 mm Table clamping surface: 1250 x 700 mm Spindle taper: ISO 50 Spindle speeds: 20 - 3200 rpm Quill stroke: 100 mm Iodpfetv Ii Isx Agpea Control system: semi-automatic Phillips 432 Operating hours: 62,340 h Main drive motor: 22 kW Total power requirement: 27 kVA Machine weight: approx. 7.7 t Footprint: 3.8 x 4.1 x 2.4 m Accessories: Hydraulic vice X-axis, longitudinal: 1,000 mm Y-axis, vertical: 500 mm Z-axis, transverse: 700 mm Min/Max distance vertical spindle to table top: 138 / 600 mm Max. arm reach: approx. 800 mm Spindle taper: SK 50, with internal coolant supply, Stepless spindle speeds (2 ranges): 20 - 3,200 rpm Feed rates XYZ = 1 - 3,000 mm/min Rapid traverse XZ = 6,000 mm/min, Y = 5,000 mm/min Indexing device as 4th axis With full enclosure of the work area

Leto izdelave: 1984, Stanje: pripravljen za uporabo (rabljen), A CNC universal tool milling machine from Maho is available. Travel X/Y/Z: 1000mm/560mm/800mm, table dimensions X/Y: 1150mm/800mm, tool holder: ISO50, spindle speed: 2000 rpm, feed rate: 3 m/min, rapid traverse: 6 m/min, maximum table load: 800 kg. Machine dimensions X/Y/Z: approx. 4600mm/2300mm/3000mm, weight: approx. 7500 kg. The control system was upgraded and renewed in 2007. An on-site inspection is possible. Isdpov Ifwrjfx Agpja

Stanje: potreben popravila (rabljeno), Leto izdelave: 1983, Funkcionalnost: omejena funkcionalnost, skupna višina: 2.650 mm, skupna širina: 3.640 mm, skupna dolžina: 4.620 mm, skupna masa: 6.800 kg, Tehnični podatki: Pomik po osi X: 1000 mm Pomik po osi Y: 560 mm Pomik po osi Z: 800 mm Hitri pomik: 6 m/min Delovni pomik: 1–400 mm/min Ločljivost rotacijske osi (stopinje): 0,001 Krmilna enota: Philips 432 Število vrtljajev vretena: 20–2000 vrt/min Hod vretena: 125 mm Stožec vretena: ISO 50 Moč vretena: 15 kW Pomikalna sila osi X in Z: 8000 N Pomikalna sila osi X in Z: 24000 N Velikost mize: 1250 x 800 mm Nosilnost mize: 800 kg Programska ločljivost: 0,001 mm Ijdpfx Agsunwd Tjpoa Dokumentacija za stroj Opomba: Elektronska kartica je v okvari in jo je treba zamenjati. Stroj je mehansko v odličnem stanju in ga je mogoče enostavno nadgraditi z modernimi CNC krmilji.

Stanje: rabljeno, Leto izdelave: 1996, Konzolni rezkalni stroj - univerzalni Znamka: MAHO Tip: MH1000 Tehnične specifikacije: - Motor vretena: 5,5 kW - 1500 vrt/min - Motor za pomik: 3 kW - 1500 vrt/min - Motor črpalke: 0,18 kW - 3000 vrt/min - 70 l/min - Število vrtljajev vretena: (18) 32-1600 vrt/min - Vpenjalni konus vretena: ISA40 - Hod pomičnega vretena: 125 mm - Dimenzije mize ob stolpu: 570x600 mm - Hod X: 1000 mm - Hod drsnika: 750 mm - Hod Z: 600 mm - Pomik X: 10–5000 mm/min - Hitri pomik: 1,4 m/min - Dimenzije univerzalne mize: 1250x740 mm - 360-stopinjsko vrtljiva miza - Miza se nagiba vzdolžno in prečno približno 30 stopinj - Teža stroja: 5500 kg Isdpfjxn Rkgsx Agpja

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 5100027000 touch panel for Deckel Maho CNC 432 control, serial no. as per photo, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Iedpfx Agsi D Upgspsa

Stanje: pripravljen za uporabo (rabljen), Operating hours: 28,797 h, completely overhauled. Ijdpegxu Dzsfx Agpoa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 710 mm, pomik po osi Z: 710 mm, model krmilnika: MILLPLUS iT HEIDENHAIN, obremenitev mize: 800 kg, 5-osni simultani obdelovalni center! TEHNIČNI PODATKI Premik X: 1.250 mm Premik Y: 710 mm Premik Z: 710 mm Delovna površina mize: 1.500 x 800 mm Obremenitev mize: 800 kg Število vrtljajev: 12.000 min⁻¹ Vretenov motor: 15 / 10 kW Vpenjalni stožec: SK 40 Ijdpfexwlgzex Agpoa Menjalnik orodij: 60 pozicij PODROBNOSTI O STROJU Krmilje: MILLPLUS iT HEIDENHAIN Priključna moč: 44 kVA Dimenzije in teža Potrebni prostor: cca 3,5 x 2,65 x 2,65 m Teža stroja: cca 10,5 t OPREMA Os B (-120 / +30) NC-rotacijska miza integrirana v fiksno mizo Neposredni merilni sistem 3D infrardeča tipala HEIDENHAIN TS 640 IKZ 40 bar, 600 l Izpiralna pištola Transporter za ostružke Programska oprema 3D Quickset Opomba: Stroj je popolnoma delujoč. Rotacijska miza in os X povzročata zvoke.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1153 000006 3, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, model krmilnika: Siemens 840 D Solutionline (PCU 50), največja hitrost vretena: 8.000 obr/min, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Feed rate X, Y, Z axes: 20 – 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-axis travel: 360 x 0.001° Feed rate B-axis: 10,800 /min Max. table rotation speed: 30 rpm Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Max. workpiece weight: 1,500 kg Clamping surface: 800 x 800 mm Pallet weight: 570 kg Spindle speed: 20 – 8,000 rpm Max. permissible load difference for pallet loading: 1,000 kg Tool holder: SK 50 as per DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions MACHINE DETAILS Control: Siemens 840 D Solutionline (PCU 50) Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Space required: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Operating hours Iodpfx Ajxvz Edogpsa "Counter outside 2 (read off)": 60,197 h EQUIPMENT Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extractor Length measurement system Y-axis (new spare part) Lubrication unit 230V 0.12 30bar (new spare part) Gear unit ZAHNRADP-AGG*MKF1-KW2-20036 (new spare part) Cyclo gear*F1C-A25 (new spare part) Retrofit kit for power module (new spare part) Lifting devices for the machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Premiki Premik po osi X: 700 mm Iedpfx Aoxx Dw Isgpoa Premik po osi Y: 550 mm Premik po osi Z: 500 mm Ta 3-osni DECKEL MAHO DMC 70 V je bil izdelan leta 2002. Opremljen je z izmenjevalcem orodij s 30 mesti, hitrostjo vretena 18.000 min⁻¹ in transporterjem za odrezke. Krmilni sistem je TNC 430. Opomba: orodne peresa v smeri Z so okvarjena. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju DECKEL MAHO DMC 70 V, ki je pri nas naprodaj. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: potreben popravila (rabljeno), Leto izdelave: 1980, Orodna rezkalna stroj MAHO 800 P, rezkalna glava s pomikom pinole. Potreben popravila. Za uporabo kot rezervni deli. Možna tudi prodaja posameznih delov. Ijdsxz D T Uspfx Agpea

Stanje: dober (rabljeno), DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2 Axis CNC Milling Machine With SIEMENS 810 D – ShopMill Software Year of manufacture: 2001-2003 Travel distances X/Y/Z: 350 x 240 x 340 mm Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rates: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotary range: 360 degrees Swivel range: degrees Total connected load: kVA Weight: approx. 1,750 kg Technical data not binding! Accessories/Equipment: - Direct measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox stages - Full safety enclosure with sliding door - Swivelling control panel - Coolant nozzles on vertical head - Coolant unit - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine lamp - Serial RS232C, LAN (RJ45) interface The machine is perfect for prototyping, toolmaking, training, mechanical workshops, gunsmiths, etc. It impresses with its versatility, thanks to the additional manually operated rotary/swivel table that enables 5-side machining. Available March 2026 A total of 3 machines are available. Condition: good to very good from vocational training center, see pictures. Ijdpfexz Rdajx Agpsa

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Heidenhain Mill-Plus control system Travel paths X/Y/Z: 500 x 380 x 380 mm Clamping area: 500 x 400 mm Tool magazine for 24 tools, SK 40 Spindle speed: 8,000 rpm NC rotary and swiveling table Iedpjvu Slpjfx Agpoa Chip conveyor

Stanje: dober (rabljeno), DMU 60P hi-dyn, delovni čas 37.732 h, vreteno 22.802 h Isdpfx Aoxy T Ulsgpea

Stanje: nepreverjeno (rabljeno), MAHO Universal Milling Machine MH 500 W 1 With AKTIV Digital Readout 132 Year of manufacture: approx. 1985-88 Travels (X/Y/Z): 500 x 350 x 375 mm Spindle speed: 63 – 4,000 rpm, stepless Spindle taper: ISO 40 Swivel table: 800 x 360 mm Feed rates: 1 – 3,000 mm/min Rapid traverse: 5,000 mm/min Total power consumption: approx. 3 kW Weight: approx. 1,400 kg Dimensions (L x W x H): 1,700 x 1,300 x 1,800 mm Technical specifications not legally binding! AKTIV Digital Readout 132: - 3-axis display - User-friendly manual or conventional machine operation enables certain automation sequences - 12" monochrome monitor - Teach-in operation possible - Tool radius correction - Absolute/incremental input - Reference point setting - Metric/inch input The machine comes from a vocational training workshop and has been generally well maintained. The control system powers up and the axes can be moved. Iodpfxoxz Rcvs Agpsa However, the machine is being sold as 'defective' as further functional testing by us was not possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Heidenhain MillPlus control Travel paths X/Y/Z: 630/560/560 mm Spindle speed: 12,000 rpm Magazine for 20 tools SK 40 Ijdpsr Hrwxofx Agpea

Stanje: dober (rabljeno), Leto izdelave: 2005, DMC 80U duoblock, leto izdelave 2005, CNC MillPlus IT, vreteno 18.000 obr./min, stožec SK40, avtomatski menjalec orodij 60 pozicij, hlajenje skozi vreteno, serijska številka 1147 000022 3, vklopljenih ur 42.344 h, ur vretena 23.544 h Iedpfx Agexy T Hnspoa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Control: Siemens Sinumerik 840D Isdpfswrt Rmsx Agpoa Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed: 15,000 rpm 2-station pallet changer, 400 x 400 mm Tool magazine for 40 tools, SK 40 Paper filter Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2004, DMC 80 U, letnik 2004, CNC MillPlus IT, vreteno 18.000 vrt/min, konus SK40, hlajenje skozi vreteno, ATC 60 pozicij, serijska številka 1120 000170 3, čas delovanja 41.449 h, delovanje vretena 21.015 h Iodexy Tybopfx Agpoa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Heidenhain iTNC 530 control system Travel (X/Y/Z): 750/600/560 mm Spindle speed: 18,000 rpm Tool magazine for 30 tools, HSK 63 Internal coolant supply (IKZ): 80 bar Clamping surface: 950 x 650 mm Temperature-controlled work area Touch probe Iedpfx Asvcyixegpoa Extraction system Chip conveyor Numerous tool holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Heidenhain TNC 620 control system Travel paths X/Y/Z: 1035/560/510 mm, Spindle speed: 12,000 rpm, Tool magazine for 30 tools, SK 40, Coolant through spindle, 12 bar, Iedpfx Aewid Ecegpea Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Krmiljenje Philips CNC 432 Pomiki X/Y/Z 600 x 400 x 450 mm Iodpfsxc N Iyex Agpea Hitrost vretena 4.000 min⁻¹ 20-mestni magazin za orodja SK 40 4. os Lehmann

Leto izdelave: 1995, Stanje: zelo dobro (rabljeno), Control: Siemens Travel paths X/Y/Z: 350 x 240 x 340 mm Spindle speed: 6300 rpm Ijdslawavopfx Agpoa Tool holder: SK 40 Manual swivel rotary table Tool holder Vice Accessories