Maho Mh 1600 S nakup rabljenega (465)

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm, Tool holder: ISO 50, Spindle speed: 20–4000 rpm, Feed rate: 1–4000mm/min, Max. rapid traverse: 10m/min, Number of tool stations: 36, Max. tool diameter: 160/210mm, Max. tool length: 315/400mm, Max. tool weight: 15kg, Control: Heidenhain iTNC 530, Connected load: 40kVA, Machine dimensions (LxWxH): 5080mm/3650mm/2005mm, Weight: approx. 16t, Documentation available, complete retrofit in 2015. Hjdsulzk Sepfx Ah Dofn

Leto izdelave: 1989, Stanje: pripravljen za uporabo (rabljen), A CNC 4-axis universal bed milling machine Maho is available. Travel X/Y/Z: 1600mm/800mm/800mm, table dimensions X/Y: 1250mm/800mm, max. table load: 3000kg, spindle taper: SK50, main spindle speed: 4000rpm, power: 22kW. Tool stations: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16,000kg, control: Philips CNC 232. An on-site inspection is possible. Hfjdev Ubqnjpfx Ah Den

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Travel X/Y/Z: 700mm/500mm/600mm, Spindle speed: 6300rpm, Power: approx. 10kW, Feed X/Y/Z: 4m/min, Rapid traverse X/Y/Z: 10m/8m/10m/min, Machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, Weight: approx. 6000kg, Operating hours: 65,425h. An on-site inspection is possible. Hfjdpfx Ajwmqxksh Djn

Stanje: rabljeno, Leto izdelave: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm Total power requirement 25 kW Machine weight approx. 11.5 t M A H O CNC-controlled universal bed-type machining center Model: MH 1200 S (#120012) Year of manufacture: 1991, partially overhauled and modernized by MMD in 2007 _____ X-axis (longitudinal): X 1,200 mm Y-axis (vertical): Y 600 mm Z-axis (cross): Z 600 mm Table size (CNC rotary table): 1,000 x 800 mm Max. outreach: 900 mm Spindle taper: SK 40 Spindle speeds (infinitely variable in 2 stages): 20 – 6,300 rpm Workpiece weight approx.: 1,000 kg Feed/rapid traverse in XYZ-axes: 1 – 4,000 / 12,000 mm/min Feed/rapid traverse in B-axis: 1–1,500°/10 rpm Spindle drive: 15 kW Total drive power approx.: 25 kW – 380 V – 50 Hz Weight approx.: 11,500 kg (LxWxH = 2.95 x 3.70 x 2.80 m) Accessories / Special Equipment: • MAHO CNC 5-axis contouring control type CNC 432 with color display, graphics, all standard subprograms and cycles, and mobile hand-held console, RS 232 interface for external data transfer • CNC rotary table (B-axis) in combination with swivel milling head enables 5-axis machining, resolution 360,000° • Vertical, swiveling milling head with hydraulic tool clamping • Horizontal milling spindle with hydraulic tool clamping • CNC-controlled tool changer with 36 positions, tool life monitoring, and tool breakage monitoring • Standalone coolant system (no IKZ), full enclosure with large sliding doors, chip conveyor, oil cooler for hydraulics Condition: Very good – under power, ready for demonstration. Hedot Hwqwjpfx Ah Defn Very robust machine for heavy-duty cutting. In 2007, partially overhauled by MMD, geometrically calibrated, mechanically and electrically inspected. “Super machine” for the expert. Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 77533, dolžina podajanja os X: 700 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 600 mm, največja hitrost vretena: 6.300 obr/min, pomik vretena: 80 mm, TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Spindle stroke: 80 mm Spindle speed: 20 - 6,300 rpm Feed rate: 1 - 4,000 mm/min X and Z rapid traverse: 12 m/min Hfjdpfxewtq T Uj Ah Don Y rapid traverse: 10 m/min Accuracy: 0.001 mm

Stanje: rabljeno, Leto izdelave: 1981, Rezkalna glava s pomikom pinole in hidravličnim vpenjalcem orodja Za MAHO MH 800 P Hsdpfx Ahew Uk Dno Defn

Leto izdelave: 1980, Stanje: delavnici obnovljeno (rabljeno), Universal swivel-tilting table for MAHO MH 1000 Hfsdofx Aipepfx Ah Don Clamping surface: 1050 mm x 630 mm The universal swivel-tilting table is in good condition!

Stanje: rabljeno, Leto izdelave: 1990, used milling machine, manufacturer Maho 1000 S x-travel: 1000 mm Hjdpfx Ahstrnrpe Dsfn y-travel: 600 mm z-travel: 800 mm Spindle taper: ISO 50 Equipped with Philips 432 CNC control Includes pallet changer, in functional condition, recently overhauled rotary table

Stanje: rabljeno, Leto izdelave: 1992, x-pomik 1000 mm y-pomik 500 mm z-pomik 700 mm Vpenjalna površina mize 1250 x 700 mm Hitrost vretena 20 - 3.200 vrt/min Hodpfx Ahoxndcco Dsfn Glavni pogonski motor 22 kW Pomik vretena 100 mm Razdalja glava vretena - miza min./max. 138/600 mm Podajanje (x / y / z) 3.000 mm/min Hitri pomik (x / y / z) 60/50/60 m/min Skupna potrebna moč 27 kW Naša ocena je, da je stroj v zelo dobrem rabljenem stanju in si ga je mogoče po dogovoru ogledati pod napetostjo. Pribor, prikazana orodja in vpenjalne naprave so del dobave samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do predhodne prodaje!

Stanje: rabljeno, Technical Data: Working Area X-axis: 500 mm Y-axis: 400 mm Z-axis: 300 mm Spindle Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 rpm, directly programmable Feed rates: X / Y / Z = 1 - 3000 mm/min Fixed table: 700 x 350 mm, 5 T-slots Fixed table: max. load capacity 250 kg Connection: 400 V Weight, approx.: 1,900 kg Hfjdpfxjqbq Ufs Ah Don Machine dimensions, approx.: 2400 x 1850 x 1850 mm Required space: 3200 x 4100 mm, height 1920 mm Features: - CNC control - Fixed table - Milling head swivel +/- 90° - Hydraulic clamping unit - Coolant device - Emergency stop button

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Krmiljenje Philips CNC 432 Hfodpfx Ajxc N Iysh Don Pomiki X/Y/Z 600 x 400 x 450 mm Hitrost vretena 4.000 min⁻¹ 20-mestni magazin za orodja SK 40 4. os Lehmann

Stanje: dober (rabljeno), x-travel 400 mm y-travel 375 mm z-travel 250 mm Table size 205 x 800 mm T-slots 4 x 45/14 H7 Spindle speeds 50 - 3150 rpm Tool holder 40 ISO Quill stroke 50.0 mm Feeds X & Z axes 5.0 - 1000 mm/min Hfedpfx Asxl E Syoh Den Feed Y axis 5.0 - 670 mm/min Rapid traverse 2.4 / 1.6 m/min Control system Heidenhain Total power requirement 5.1 kW Weight 950 kg Dimensions (L x W x H) 1860 x 1790 x 1750 mm From a training workshop (vocational school) Well-maintained condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN positioning/contouring control "TNC 135" * 3-axis manual input control * Programmable by machine operator * Practical and simple operation - Electro-motorised feeds on all axes (X/Z/Y) * X and Z axes: 5.0 - 1000 mm/min with rapid traverse 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse 1.6 m/min - Swivelling milling head in both directions - Tilting T-slot universal table - Vertical clamping area - Infinitely variable spindle speed adjustment - Manually extendable quill - Hardened and ground guideways - Electro-hydraulic tool clamping - Coolant system - Front coolant drip tray - Operating manual

Leto izdelave: 1987, Stanje: zelo dobro (rabljeno), Manufacturer: MAHO Model: MH 800 T Year of manufacture: 1987 Control: Heidenhain TNC 355 Technical Data Working Range Hodpfelzkdljx Ah Defn X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 500 mm Table Fixed angular table: 900 x 600 mm Maximum workpiece weight: 800 kg Working Spindle: 63–3150 rpm Machine dimensions Length: 3817 mm Width: 3937 mm Height: 2047 mm Weight: 4100 kg

Stanje: rabljeno, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D Path Control Heidenhain iTNC 530 Travel range X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar bolt DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed speed 0-20,000 mm/min Rapid traverse speed X axis 100 m/min Rapid traverse speed Y+Z axis 50 m/min Mains connection 400 Volt, 50 Hz, 73 kVA - 30-position automatic tool changer - Internal coolant supply through the spindle 40 bar (ICS) - Compressed air with minimum quantity lubrication for tool cooling - Compressed air through spindle center via M-function - 2 rotating safety glass panes - Operating mode 4, process monitoring in production - Electronic handwheel on the operator station - Separate coolant preparation unit, paper band filter with filter sump - Chip conveyor, to be slid under the working area - Centralized grease lubrication system - Operating manual - Operating hours - control on = 75188 h - Operating hours - program run or spindle on = 31632 h - Control system with interfaces for data transfer, RS232C + USB Installation area L x W x H 650 x 400 x 280 cm Footprint of the main machine L x W x H 490 x 395 x 275 cm (with operator panel) Space required for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space required for coolant preparation unit L x W x H 180 x 115 x 190 cm (500 kg) Transport dimensions main machine L x W x H 500 x 248 x 275 cm Additional transport space required for further components 550 x 240 x 250 cm Weight of main machine approx. 12.5 tons Hfsdpfsw Iqt Asx Ah Djn Good condition

Stanje: rabljeno, Leto izdelave: 1988, X-pomik 600 mm Y-pomik 450 mm Z-pomik 450 mm Vrtljaji vretena 20 - 6300 min⁻¹ Število orodij 30 kos Hfjdsw Inr Ajpfx Ah Djn Vpenjanje orodja SK 40 Skupna potrebna moč 17 kW Teža stroja pribl. 4 t Potrebni prostor pribl. 3,2 x 3,4 x 2,2 m 4-osni univerzalni orodni rezkalni stroj

Stanje: dober (rabljeno), številka stroja/vozila: 85382, UNIVERZALNI OBRATOVALNI CENTER MAHO MH 800 C, serija: 85382 Pomik osi X: 800 mm Pomik osi Y: 500 mm Pomik osi Z: 600 mm Dimenzije delovne mize: 900 x 625 mm Maksimalna dovoljena obremenitev mize: 600 kg Hitrost vrtenja vretena: od 20 do 5.000 vrt/min, 15 kW Hjdeldgf Hepfx Ah Djfn Vretenasta glava: stožec ISO 40 Magazin orodij s 30 pozicijami Numerični krmilnik MAHO Dimenzije stroja: 3.350 mm x 2.520 mm x 2.500 mm Teža stroja: 6.200 kg Stroj je v dobrem tehničnem stanju Cena: 13.000 EUR + DDV Možne napake, spremembe in predhodna prodaja pridržane. Govorimo angleško, nemško, madžarsko, francosko in romunsko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, Takoj na voljo na lokaciji: Orodna rezkalna stroj MAHO Tip MH 500 M Leto izdelave 1989 Heidenhain digitalni prikaz Miza 800 x 360 mm SK 40 Vrtljaji vretena 63 – 4000 min⁻¹ Pomik pinole 50 mm Pomiki X/Y/Z 500/380/350 mm Pogon 3 kW Pomiki 10 – 1000 mm/min Hladilna naprava Teža 1600 kg Pribor Hidravlični primež Cena: 3.000 € + DDV iz lokacije. Hsdjxldy Nopfx Ah Dsfn

Stanje: dober (rabljeno), x-pomik 300 mm y-pomik 350 mm z-pomik 350 mm Stožčasti vpenjalni stožec glavnega vretena ISO 40 Pritrdilna površina mize 625 x 380 mm T-utori 8 kom. Hitrost vrtenja 40,0 - 2.000 o/min Prestavne stopnje 18 kom. Podajalna hitrost brezstopenjska 0 - 500 mm/min Hod pinole 60,0 mm Razdalja med čelom vretena in mizo min 50 / max 400 mm Napetost 400 V Skupna potreba po moči 5,1 kW Teža stroja cca. 800 kg Dimenzije D-Š-V 1400 x 1100 x 1700 mm iz šolske delavnice (poklicna šola) vzdrževano stanje (!!) Oprema: - robusten elektro-motorni univerzalni rezkalni stroj - HEIDENHAIN 3-osni digitalni prikazovalnik - rotirajoča univerzalna rezkalna glava (levo/desno = 90°) - ročni podajalnik vretena, z zaklepom - stabilna kotna/montažna miza s T-utori * nagibna +/- 30 stopinj - podajalnik osi z hitrim hodom v X+Z+Y osi * hiter hod brezstopenjsko nastavljiv - nagibna strojna svetilka - krmilna omara, nameščena levo Hjdpfx Aoxl E Steh Defn - hladilna naprava

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.000 mm, dolžina pomika po osi Y: 750 mm, dolžina podajanja os Z: 600 mm, Prodam na fotografijah vidno nemški rezkar MAHO model MH 1000. Stroj je delujoč, priključen in pripravljen za uporabo. Stanje stroja ocenjujem kot zelo dobro. Stroj lahko na mestu priključite in preizkusite. Nakladanje stroja je vključeno v ceno. TEHNIČNI PODATKI: - Hitri pomiki v vseh oseh - Orodje se vpenja mehansko - X 1000 mm - Y 750 mm - Z 600 mm - Stožec vretena ISO 40 - Vrtalna pinola z avtomatskim podajanjem - Obrnjena glava - Dimenzije mize 740 x 1250 mm, trojno obračljiva - Dodatno ima ročni pomik v osi Y +-200 mm Hodpfxevmhtye Ah Defn - Miza obračljiva za 360 stopinj - Miza vzdolžno in prečno obračljiva plus/minus 30 stopinj - Obrati od 32 do 1600 - Dimenzije stroja 3500x2500x2500 mm - Teža cca 5500 kg

Stanje: rabljeno, Leto izdelave: 1986, X-hod 400 mm Y-hod 375 mm Z-hod 250 mm Velikost mize 600 x 300 mm Hod pinole 50 mm Vretena ISO 40 Obrati vretena 50-400, 400-3150 min⁻¹ CNC krmilnik TNC 135 Obratovalna napetost 380 V / 50 Hz Pomiki X+Z = 5 - 1000 mm/min Hitri pomiki X+Z = 2,4 m/min Pomiki Y = 5 - 670 mm/min Hitri pomik Y = 1,6 m/min Hfjdpfx Ahexc Nwnj Djn Ločljivost merilnega sistema 0,005 mm Skupna priključna moč 3,7 kW Teža stroja pribl. 0,9 t Prostorska zahteva pribl. 1,9 x 1,8 x 1,70 m z Heidenhain TNC 135 (sledilno krmiljenje)

Stanje: rabljeno, Leto izdelave: 2004, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.100 mm, skupna višina: 4.375 mm, skupna dolžina: 12.300 mm, skupna širina: 11.200 mm, širina mize: 1.400 mm, dolžina mize: 1.600 mm, obremenitev mize: 3.500 kg, Oprema: dokumentacija / priročnik, Deckel Maho DMC-200 U Series 1512 5-Axis CNC Universal Machining Center, Simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 Max. workpiece diameter x height: 1950x1100 mm X-axis travel: 1800 mm Y-axis travel: 2000 mm Z-axis travel: 1100 mm C-axis table rotation: 360° B-axis rotation: -7 / 187° Spindle speed: 18,000 rpm Hfedpexd A S Usfx Ah Den Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required floor space: 11,200x12,300 mm Height: 4,375 mm Weight: 58,000 kg If you have any questions about the machine or wish to schedule a viewing appointment, please feel free to contact us by phone or e-mail.

Stanje: rabljeno, Leto izdelave: 1988, x-travel 600 mm y-travel 450 mm z-travel 450 mm Quill stroke 80 mm Table size 1000 x 400 mm Spindle speeds 20 - 3000 rpm Hjdpju Rt I Iofx Ah Dsfn Spindle taper SK 40 Feeds – automatic programming 1 - 4000 mm/min Rapid traverse 6 m/min Control Philips 432 Drive power 12 kW Total connected load 15 kW CNC control Philips 432, swiveling vertical head, coolant pump, hydraulic tool clamping, automatic central lubrication, machine lamp, chip collecting tray with spray protection enclosure.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Takoj na voljo z univerze: Orodna rezkalna stroj Maho Tip MH 400 P Leto izdelave 1990 Heidenhain TNC 135 Miza 690 x 270 mm Pomiki s podajalno 360/200/375 mm Pomiki z ročnim kolesom 400/250/375 mm SK 40 Hidravlično vpenjanje orodja Vrtljaji vretena 40 – 2500 /min brezstopenjsko Hodpfx Aexldypeh Dofn Pomik osi X in Z 5 – 1000 mm/min brezstopenjsko Pomik osi Y 5 – 670 mm/min brezstopenjsko Hitri pomik 1,2 m/min Pogon 2,2 kW Klasična ročna kolesa za osi X/Y/Z Hladilni sistem Vpenjala Primež Teža 1000 kg Cena: 4.500 EUR + DDV iz lokacije

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, številka stroja/vozila: 32392, Table clamping surface: 560 x 240 mm X-axis travel: 300 mm y-axis travel: 275 mm Hjdsd Tfciepfx Ah Dsfn z-axis travel: 200 mm Spindle taper: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.1 kW Required space: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

Leto izdelave: 1982, Stanje: dober (rabljeno), številka stroja/vozila: 75 810, Table clamping surface: 630 mm diameter Travel X: 600 mm Travel Y: 450 mm Travel Z: 500 mm Quill stroke: manual, 80 mm Spindle taper: ISO 40 Hedpfx Ajby Hhteh Dofn Spindle speeds: 20 – 3150 rpm Feed rate, infinitely variable: 1 – 3000 mm/min Rapid traverse: 4 m/min Electrical connection: 380 V Footprint: 2000 + 850 x 2000 x 2000 mm Weight: 3300 kg