MAHO MH 1000 C/A
MAHO MH 1000 C/A

Name: MAHO MH 1000 C/A
Brand: MAHO
Availability: InStock

Leto izdelave

1985

Stanje

Rabljeno

Lokacija

Nemčija

Podatki o stroju

Oznaka stroja:: MAHO MH 1000 C/A

Proizvajalec:: MAHO

Model:: MH 1000 C/A

Leto izdelave:: 1985

Stanje:: pripravljen za uporabo (rabljen)

Obratovalne ure:: 29.192 h

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Tehnične podrobnosti

Največja hitrost vretena:: 4.000 obr/min

Skupna višina:: 2.988 mm

Skupna širina:: 4.288 mm

Skupna masa:: 9.000 kg

Potovalna razdalja osi X:: 1.000 mm

Pomik osi Y:: 600 mm

Pomik po osi Z:: 800 mm

Največja dolžina izdelka:: 4.152 mm

Število osi:: 3

Podrobnosti ponudbe

ID oglasa:: A21798573

Referenčna številka:: DE-MIL-MAH-1985-00001

Posodobitev:: nazadnje dne 15.05.2026

Opis

This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 operating hours and comes with manuals and documentation. The safety doors are partially disassembled but included. If you are looking for high-quality machining options, you should consider the MAHO MH 1000 C/A universal machining center we offer for sale. Contact us for further details.

Hodpfx Aoy Hizqsbxsnn
Tool interface: ISO 50
Ram travel, vertical spindle: 100 mm
Spindle speed range: 20-4000 rpm
Spindle speed override: 80–120%
Feed rate X/Y/Z: 1–4000 mm/min
Feed force X/Z: 8000 N
Feed force Y: 24,000 N
Rapid traverse: 10 m/min
Feed and rapid traverse override: 0–140%
Table diameter: 1250 mm
Table length: 800 mm
Center bore: 42 mm H7
T-slots: 7
T-slot spacing: 100 mm
Manual cross adjustment: 275 mm
Table transmission ratio: 1:120
Table rotation per handwheel revolution: 3°
Table rotation per index: 2°
Positioning resolution: 0.001°
Step width per index: 0.026 mm
Table tilt X-axis: ±30°
Table tilt Y-axis: ±30°
Table rotation: 360°
Table clamping pressure: 80 bar
Max. table load: 800 kg
Table weight: 1100 kg
Voltage: 220/380 V
Frequency: 50 Hz
Total connected load: 36 kVA
Total power with coolant: 41 kVA
Total power with coolant and tool changer: 46 kVA
Positioning accuracy: 0.001 mm
Approximate machine hours: 29,192 h
Condition: currently idle, not in operation
Documentation/manuals: available
Safety doors: partially disassembled, included
Accessories: none
Tool holders: not included
Table axis: only one axis, cannot reference manually, error present

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.395 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Navpični obdelovalni center Spinner MVC 1600

Nemčija

650 km

Navpični obdelovalni center
SpinnerMVC 1600

Pokliči

Stanje: rabljeno, Leto izdelave: 2013, A 4-axis CNC machining centre by Spinner is available. Travel distances X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18 m/min, rapid traverse Z: 15 m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10,000 rpm, power: 22kW, tool holder: SK40, tool magazine: 24 positions, weight: approx. 8,000kg. Documentation available. Inspection on site possible. Hedpfxewqd R Ue Abxonn

Poglej podrobnosti

Mali oglas

CNC stružnica švicarskega tipa BOLEY BC20-VI

Contamine-sur-Arve

667 km

CNC stružnica švicarskega tipa
BOLEYBC20-VI

Pokliči

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel Z: 150 mm - Travel X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel X/Y: 97/133 mm BACK WORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 6 kW WEIGHT AND DIMENSIONS - Footprint: 1063/2033 mm Hsdpouha Umofx Abxsnn - Machine height: 1666 mm - Machine weight: 1700 kg ACCESSORIES - Control: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Poglej podrobnosti

Mali oglas

Wiesbaden

667 km

Okrepitev/t-slot ploščo

Pokliči

Mali oglas

Nemčija

839 km

CNC stružnica
INDEXGU 3000

Pokliči

Mali oglas

Vertikalni obdelovalni center Hurco VMX30

Madžarska

362 km

Vertikalni obdelovalni center
HurcoVMX30

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Splošni podatki Širina: 2.300 mm Globina: 2.800 mm Višina: 2.700 mm Teža stroja: 4.500 kg Glavni pogon Območje vrtljajev vretena: 10.000 min⁻¹ Moč motorja vretena: CAT40 / SK40 Število osi: 4 Pomik Pomik osi X: 762 mm Hitri pomik osi X: 24 m/min Pomik osi Y: 508 mm Hitri pomik osi Y: 24 m/min Pomik osi Z: 610 mm Hnodpfxox D Ikps Abxon Hitri pomik osi Z: 24 m/min Miza Velikost T-utora: 18 mm Število T-utorov: 5 Nosilnost mize: 750 kg To štiriosno obdelovalno centro Hurco VMX30 je bilo proizvedeno leta 2004. Ponaša se s CNC rezkalnim strojem z vrtljivo mizo za funkcionalnost četrte osi. Ključne tehnične lastnosti vključujejo hod po osi X 762 mm, Y 508 mm, Z 610 mm in dimenzijo mize 1.016 × 508 mm. Največja hitrost vretena je 10.000 min⁻¹, revija za orodje ima kapaciteto 24 orodij. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Hurco VMX30. Za več informacij nas kontaktirajte. Uporaba Rezkanje

Poglej podrobnosti

Mali oglas

Stroj za rezkanje na postelji - Universal AUERBACH FBE 1200

Krefeld

845 km

Stroj za rezkanje na postelji - Universal
AUERBACHFBE 1200

Pokliči

Stanje: rabljeno, Leto izdelave: 1995, x travel 1200 mm y travel 600 mm z travel 600 mm Table size 1300 x 600 mm Max. workpiece weight 2000 kg Spindle taper ISO 50 Spindle speeds - stepless 30 - 3500 rpm Feed rates stepless 1 - 6000 mm/min Rapid traverse 10 m/min Drive power - milling spindle 18 kW Spindle torque 500 Nm Hnedovw Duhspfx Abxon Distance spindle/clamping surface max. 267 - 867 mm Distance table/vertical head 58 - 658 mm Mains voltage 380 V / 50 Hz Control voltage 230 V Total power requirement 22 kW Machine weight approx. 6.5 t Dimensions 3.6 x 4.2 x 2.3 m CNC control DR. HEIDENHAIN TNC 360, hydraulic tool clamping device, electric handwheel, manually swiveling vertical head, coolant system,

Poglej podrobnosti

Mali oglas

Ciklu pod nadzorom stružnica Weisser Heinbronn HECKTOR CNC 295x2000

Fuldatal

707 km

Ciklu pod nadzorom stružnica
Weisser HeinbronnHECKTOR CNC 295x2000

Pokliči

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Hjdpfsgyy I Asx Abxonn Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Poglej podrobnosti

Mali oglas

Navpični obdelovalni center DECKEL MAHO DMU 125 P hi-dyn

Düsseldorf

823 km

Navpični obdelovalni center
DECKEL MAHODMU 125 P hi-dyn

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 33.831 h, potovalna razdalja osi X: 1.250 mm, pomik osi Y: 880 mm, pomik po osi Z: 800 mm, model krmilnika: '3D contouring control Millplus, teža obdelovanca (maks.): 1.000 kg, skupna dolžina: 7.000 mm, skupna širina: 3.500 mm, skupna masa: 3.902 kg, hitrost vretena (min.): 18.000 obr/min, moč vretenovega motorja: 15.000 W, Year of manufacture: 2000 CNC control: 3D contouring control Millplus Axes Travel X-axis mm: 1250 Travel Y-axis mm: 880 Travel Z-axis mm: 800 C-axis indexing degrees: 360º (0.001) Feed rate m/min: 40 Rapid traverse m/min: 40 NC milling/turning table: Number of pallets: 1 Pallet dimensions mm: Ø1000 Max. workpiece weight kg: 1000 Max. torque Nm: 7900 Spindle Max. spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40% duty cycle/continuous) Cooling Tank capacity liters: 600 Tool system Tool holder: CAT 40 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Internal coolant supply Hjdpfx Asxvrbiobxjnn Rotating viewing windows Rinsing gun Prepared for RENISHAW probe Accuracy package Prepared for internal coolant (40/80 bar) Paper band filter Machine run time: Hours powered on: 33831 Spindle working hours: 6328 Total power requirement kVA: 55 Base machine: Dimensions/Weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Poglej podrobnosti

Mali oglas

Vertikalni 5-osni obdelovalni center Deckel Maho DMF 220 LINEAR

Cascina Faustina

475 km

Vertikalni 5-osni obdelovalni center
Deckel MahoDMF 220 LINEAR

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 17.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 560 mm, pomik po osi Z: 720 mm, hitro pomikanje X-os: 100 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: I TNC 530, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 17.000 h, nos vretena: BT 40, število mest v zalogovniku orodij: 60, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Vertikalni obdelovalni center s pomičnim stojalom, 5-osno neprekinjeno delo, z vrtljivo mizo (možnost montaže vodoravno ali navpično) premera 550 mm. Možnost nihajnega obdelovanja (tip menjave palet) z ustrezno pregrado. Hnodsy Diabepfx Abxen Opremljen z BLUM laser control NT za nastavitveno meritev. Brezžična merilna tipala za obdelovanec HEIDENHAIN TS 642. Transportni trak za izmet odrezkov. Hlajenje skozi vreteno z visokotlačno črpalko in papirnatim filtrom. Hladilnik za vreteno linijo. Daljinski ročni upravljalnik HEIDENHAIN.

Poglej podrobnosti

Mali oglas

Premični stebrna rezkalni stroj ANAYAK HVM 3800

Babberich

908 km

Premični stebrna rezkalni stroj
ANAYAKHVM 3800

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2001, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.460 mm, dolžina mize: 3.800 mm, širina mize: 1.000 mm, obremenitev mize: 30.000 kg, Chip conveyor Double doors on the front side Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant system 16 bar and 2.2 kW, flow rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Table load capacity: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: ISO 50 / BT / MK Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Hnodpfxoxc Hh Dj Abxon Feed rate Z-axis: 10,000 mm/min Auto-indexing milling head: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all important details.

Poglej podrobnosti

Oglašujte tukaj