Linematic Maschine nakup rabljenega (2.045)

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Equipment: Machine table with 13 guide rollers for improved workpiece handling Edge feed, synchronized with the belt feed Edge thickness adjustable via digital counter Pneumatic roller separation with knife (for cuttable edges) Three pressure rollers Belt feed 0.25 kW; approx. 1250 mm long; feed rate approx. 6.0 m/min; 50 mm wide toothed belt with thick, gentle rubber coating for workpiece protection. Digital counter for height adjustment Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime Flush trimming unit for front and rear workpiece edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter diameter 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm, Automatic height adjustment of the upper cutter with the belt feed Continuous workpiece support approx. 1800 mm long, extendable workpiece support rail approx. 300 mm Rotatable foil turntable Ø 800 mm Technical details: Minimum workpiece width approx. 80 mm Workpiece thickness 10 – 50 mm Minimum workpiece length approx. 220 mm Edge thickness 0.4 – 2.0 mm Roll separation max. 1.0 x 55 mm, 2 x 45 mm Glue pot heating capacity 2.7 kW Electrical connection 400V, 50 Hz, 3Ph + N Total connection load 3.8 kW Kodpfx Aeytkiuodkedi Heat-up time approx. 10 minutes Pneumatic connection 6 bar Working height approx. 880 mm Dimensions approx. 1800 x 700 x 1300 mm, excluding foil turntable Ø 800 mm Net weight approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), globina grla: 550 mm, Moč: 25 kVA Ksdpfxjyk S Utj Adkjdi Oblika: 550 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Krmiljenje SIEMENS Sinumerik 840D Dva vretena Število krmiljenih osi: 4 Maksimalna hitrost vretena: 17.500 min⁻¹ Moč vretena: 18 kW Pomik osi X: 400 mm Pomik osi Y: 700 mm Pomik osi Z: 400 mm Električna priključna moč: 68 kVA Ksdpfx Adsykumxjkjdi

Stanje: novo, Leto izdelave: 2025, Horizontal Cartoner 60-ECO – Compact, Powerful, and Flexible Kdjdpfx Asmftm Nsdkoi Lack of space is a common issue in the food industry – our BASIS 50-ECO horizontal cartoner offers a compact and high-performance solution! This machine has been specifically developed to efficiently process a wide range of folding carton sizes in the smallest possible footprint. With a base length of just 2,284 mm (extendable depending on desired conveyor length), it achieves an output of up to 60 folding cartons per minute. Technical Highlights: Adjustable Product Infeed: The infeed conveyor can be customized upon request. Automatic Product Indexing: We can design and fully integrate an automatic product indexing system. Packaging Range: Handles folding cartons up to 220 mm length (A), 120 mm width (B), and 400 mm height (H). Proven Technology for Maximum Reliability: Control: Siemens PLC system Drive: Siemens servo drives for precise motion sequences Adhesive Technology: Nordson hot melt system for clean and secure sealing In addition, we offer a comprehensive portfolio of vertical and horizontal cartoning machines as well as flow wrapping machines. All machines are manufactured in Germany or by our European partners. You are welcome to visit our factory, view the equipment, and test with your own products.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Paquet de machines Emco à vendre ! À vendre : 2 tours en lot, incluant TOUS les porte-outils et systèmes de serrage ! 1 x Emco 665 MC Plus avec contre-broche et 2 tourelles, année 2006, incluant FMB Turbo 8-80 (aléseuse de 4 mètres), année 2006 Ksdpfsyifnhex Adksdi 1 x Emco 332 Big Bore avec contre-broche et 2 tourelles, année 2001, incluant FMB 5-55 Turbo (aléseuse de 3 mètres), année 2016 Les deux machines sont en service chaque jour et peuvent être inspectées sous tension. Les machines étaient utilisées en poste unique. Comme nous nous séparons de ces deux tours dans le cadre d’un changement de système, le lot comprend une grande quantité de porte-outils, de systèmes de serrage (pour toutes les machines) et de systèmes d’avance pour les deux aléseuses, qu’il n’est pas possible d’énumérer individuellement tant ils sont nombreux ! Le démontage et le chargement des machines sur les camions du client peuvent être organisés moyennant un petit supplément !

Stanje: dober (rabljeno), • Tip – FMF 100 • Dvostranski vrtalni stroj • Min. premer: 3 mm • Maks. premer: 300 mm • Hitrost vrtenja: 110 – 4600 vrt/min Kdedpfx Adouqma Ajkji • Spodnji sveder z avtomatskim pomikom, zgornji sveder ročno voden

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Without battery Manufacturer: Fimap Kodpfx Adohzrbnsksdi

Stanje: novo, Leto izdelave: 2026, A professional folding machine with a 4.14 m working length, directly from the manufacturer Prod-Masz. Sheet metal thickness capacity: steel sheets up to 0.7 mm, bending radius: up to 160° for seam creation. Both cheeks are CNC-milled from solid material to ensure long-lasting durability. The machine is of robust construction, weighing in at 700 kg! Think there’s no company that can handle your bending needs? Think again! Prod-Masz is your bending specialist! Especially with our folding benches (Abkantbänke)! The sheet metal bending machine features a support at the exit for cut sheet metal, a protractor, angle stop, and gas pressure springs to facilitate easy raising of the bending beam. Maximum working width of the folding machine: 4140 mm Bending capacity: up to 0.7 mm (steel sheet) Bending angle of the machine: 160 degrees Bending beam thickness: 20 mm Cutting with the rotary shear across the full working width Upper beam can be raised in three positions Clearance opening: 80 mm Graduated scale Angle stop Depth stops Weight of the machine: approx. 700 kg Optional accessories: Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet): +350 euros Hand seam folder: +75 euros The machine is CE-compliant and comes with a 12-month warranty. Kdjdecgmd Ujpfx Adkoi Delivery: every week Shipping: 500 euros We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT for domestic deliveries.

Stanje: rabljeno, - 3-slojna izpihovalna linija za folijo na vrtljivi platformi - spremembe in prilagoditve glede na izdelek so možne (za doplačilo) - rezervni polž, valj in različni rezervni deli so na voljo za to napravo Osnova za prevoz: iz lokacije Kdodpfx Ajxq Hcdjdksi Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, netto

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: MH-FJ-1A, Stroj za zapiranje kartonov VOGEL MH-FJ-1A ima sistem stranskega pogonskega traku in dodatni pogonski trak v zgornjem delu stroja. Prednost je v stabilnosti – visoke kartone tako ni mogoče prevrniti na stran. Formati kartonov: Dolžina 150 – ∞ mm Širina 120 – 480 mm Višina: 120 – 480 mm Tehnični podatki: Kedoyuc Tnepfx Adkedi Dolžina 1.090 mm Širina 1.050 mm Teža 200 kg Obratovalna napetost 220 V CE oznaka Dodatna oprema: Za naš program strojev za zapiranje kartonov VOGEL nudimo transportna kolesa, vhodne in izhodne mize ter valjčne steze.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: MH-FJ-3A, Stroj za zapiranje kartonov tipa VOGEL MH-FJ-3A je opremljen z mehanizmom za zapiranje zgornjega pokrova, kar pomeni, da se kartoni lahko dovajajo v odprtem stanju. Kratki in dolgi zgornji pokrovi kartona se najprej zaprejo, nato se karton zlepi. Formati kartonov: Dolžina 150 – 600 mm Širina 115 – 490 mm Višina: 110 – 510 mm Tehnični podatki: Kedpfx Aeyuc Swjdksdi Dolžina 1.800 mm Širina 880 mm Teža 300 kg Obratovalna napetost 220 V Zrak 5 kg/cm2 CE-certifikat POMEMBNO: Za delovanje stroja je potrebna dovod komprimiranega zraka, ki ni vključen v dobavo. Dodatna oprema: Za našo linijo VOGEL strojev za zapiranje kartonov ponujamo kolesa, vhodne in izhodne mize ter valjčne proge.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: MH-FJ-1AWS, Stroji za zapiranje kartonov tipa VOGEL MH-FJ-1AWS je naš demonstracijski model in ima sistem stranskega pogonskega traku. Stroj je posebej zasnovan za manjše formate kartonske embalaže. Ksdpoyuc N Aefx Adkjdi Formati kartona: Dolžina 160 – ∞ mm Širina 90 – 320 mm Višina 60 – 280 mm Tehnični podatki: Dolžina 1.090 mm Širina 890 mm Teža 85 kg Obratovalna napetost 220 V CE oznaka Oprema: Za naš program zapiralnikov kartonov VOGEL ponujamo vodilna kolesa, vhodne in izhodne mize, valjčne proge.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: YS501X, The VOGEL YS501X ECONOMIC carton sealing machine is our recommendation, especially for larger carton formats that need to be sealed in series production. Carton formats: Length: 150 – ∞ mm Kdodpfx Aeyuc I Sedkei Width: 150 – 500 mm Height: 140 – 560 mm Technical data: Operating voltage: 220 V CE marking Accessories: For our VOGEL carton sealer range, we offer casters, infeed and outfeed tables, and roller conveyors. Our YS501X ECONOMIC carton sealer is a cost-effective solution for securely sealing larger size cartons. Two lateral conveyor belts transport your cartons safely through the carton sealer. The carton width is adjusted mechanically using a hand crank. Height adjustment on this machine is particularly quick and easy: simply release the upper taping head and set it to the desired height. Due to the mechanical format adjustments, this machine is designed for series production, where cartons of the same size are sealed over a longer period. The carton flaps must be folded down manually before feeding them into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine tape rolls with more meters per roll (compared to hand rolls) – this way, you can operate longer without needing to change the tape! Both PP & PVC adhesive tapes as well as eco-friendly paper tapes can be used. The taping heads can be easily removed to change the tape rolls. This feature can also be utilized if you only want to seal the top of the cartons (keyword: auto-bottom boxes). Naturally, this machine also bears the CE mark.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 5 h, številka stroja/vozila: MH-FJ-3A, Stroj za zapiranje kartonov tipa VOGEL MH-FJ-3A je opremljen z mehanizmom za zapiranje zgornjega pokrova, kar pomeni, da se kartoni lahko dovajajo v odprtem stanju. Kratki in dolgi zgornji pokrovi kartona se najprej zaprejo, nato se karton zlepi. Formati kartonov: Dolžina 150 – 600 mm Širina 115 – 490 mm Višina: 110 – 510 mm Tehnični podatki: Dolžina 1.800 mm Širina 880 mm Teža 300 kg Obratovalna napetost 220 V Zrak 5 kg/cm2 Kodeyuc Huepfx Adkedi CE-certifikat POMEMBNO: Za delovanje stroja je potrebna dovod komprimiranega zraka, ki ni vključen v dobavo. Dodatna oprema: Za našo linijo VOGEL strojev za zapiranje kartonov ponujamo kolesa, vhodne in izhodne mize ter valjčne proge.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: YS501X-1, The VOGEL YS501X ECONOMIC carton sealing machine is our recommendation, especially for larger carton formats that need to be sealed in series production. Carton formats: Length: 150 – ∞ mm Width: 150 – 500 mm Height: 140 – 560 mm Technical data: Operating voltage: 220 V Kodoyuc Daopfx Adkjdi CE marking Accessories: For our VOGEL carton sealer range, we offer casters, infeed and outfeed tables, and roller conveyors. Our YS501X ECONOMIC carton sealer is a cost-effective solution for securely sealing larger size cartons. Two lateral conveyor belts transport your cartons safely through the carton sealer. The carton width is adjusted mechanically using a hand crank. Height adjustment on this machine is particularly quick and easy: simply release the upper taping head and set it to the desired height. Due to the mechanical format adjustments, this machine is designed for series production, where cartons of the same size are sealed over a longer period. The carton flaps must be folded down manually before feeding them into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine tape rolls with more meters per roll (compared to hand rolls) – this way, you can operate longer without needing to change the tape! Both PP & PVC adhesive tapes as well as eco-friendly paper tapes can be used. The taping heads can be easily removed to change the tape rolls. This feature can also be utilized if you only want to seal the top of the cartons (keyword: auto-bottom boxes). Naturally, this machine also bears the CE mark.

Stanje: dober (rabljeno), Leto izdelave: 2014, višina središča: 180 mm, širina na sredini: 600 mm, premer brušenja: 260 mm,

Leto izdelave: 2026, stanje: skoraj kot novo (rabljeno), Dozator veziva / trosilnik apna, rabljen iz kratkega najema. Dozator ima integriran sistem tehtanja z zaslonom, 18V akumulatorski sistem je od Makite, zato je neodvisen od kakršnegakoli zunanjega vira energije. Kjdpeyupynjfx Adkodi Nameščena je glava OilQuick 70/55, lahko pa se zamenja. Za vprašanja sem na voljo. Lep pozdrav, Jürgen Wolf Za bagre od 15 t naprej Potrebna povratna oljna povezava: 0

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H 40, skupna širina: 1.100 mm, skupna dolžina: 2.200 mm, skupna višina: 1.800 mm, temperatura: 120 °C, Pritisna stiskalnica za furnir 2200 x 1100 mm z ogrevanjem, pritisk prek ročne črpalke. Kdjdeyuva Uopfx Adksi

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, • Travels: X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with HR 410 handwheel • Machine table for multi-sided machining: 3000 mm x 1600 mm • 2-axis NC universal drilling and milling head, suitable for simultaneous and positioning mode • Spindle: 10,000 rpm, HSK 100, 130 Nm spindle torque • Tool changer system HSK 100 / 40 stations for tools up to 750 mm long • Swarf screw conveyors in X-axis, optimized chip removal Kedsyl Scmopfx Adksdi • Chip conveyor (scraper-type) for transverse discharge, make: Knoll • Coolant supply 900 l, make: Knoll • External air • ICS (internal coolant supply) 60 bar for deep hole drilling • Enclosure with safety glass panels, open top for optimized crane loading • Split sliding doors at the front • Split sliding doors on the operator side • Wireless probing system RMP 60 • Including wash gun • Including platforms on the loading and operator side • Completely factory overhauled and newly painted • Short delivery time upon agreement, subject to prior sale • Used machine • Y-axis ball screw replaced in September 2021, including bearings • X-axis linear guide and guide carriages replaced in July 2023 • Milling spindle overhauled May 2023 (new clamping set, new clamping cartridge, new rotary feed-through, general inspection performed) (23,105 spindle hours) • Under power for inspection in 72793 Pfullingen • Optional: clamps • Optional: commissioning/installation • Optional: transport • 23,122 total spindle hours • 53,991 total machine hours • Year of manufacture: 2010 Subject to prior sale

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Control: SIEMENS 840D Number of pallets: 2 Number of axes: 5 Number of spindles: 2 Kodjycg R Hopfx Adkodi Tool holder: HSK63 Spindle drive power: 15.5 kW Spindle speed: 17,500 rpm Pitch circle distance: 300 mm LINEAR AXES Travel X/Y/Z: 300 x 650 x 400 mm Rapid traverse speed (X/Y/Z): 75,000 mm/min ROTARY AXIS A Travel: 360 degrees Minimum resolution: 0.001 degrees ROTARY AXIS C Travel: 360 degrees Minimum resolution: 0.001 degrees Number of tools in magazine: 2 x 32 PALLET CHANGER Max. table load: 300 kg Electrical supply voltage Power supply: 400 V Total drive power: 70 kVA Weight and dimensions Space requirement: 3,900 x 3,260 mm Machine height: 3,100 mm Machine weight: 8,800 kg Accessories, Equipment - Interface: Ethernet / RS232 / PCMCIA - Coolant tank: 400 l - With high-pressure pump: 70 bar - With paper band filter: KNOLL PF160/800 - With coolant chiller - Internal coolant supply (ICS) - Chip discharge: rear - Oil mist extraction: LOSMA Darwin 1200 - Spindle cooling The machine is in good used condition. Under power in Hungary.

Stanje: dober (rabljeno), Výrobca: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Výrobné číslo: M0793 Krajina pôvodu: Západné Nemecko (Kelberg / Eifel) Kdsdpfjxu E E Sex Adksi Typ: Jednošnekový extrudér na plasty Dokumentácia: Súčasťou je originálny nemecký manuál a korešpondencia z roku 1987 Stav: Použitý, ale kompletný a funkčný Lokalita: Ivanka pri Nitre, Slovensko Technické údaje (približne) Priemer šneku: 30 mm L/D pomer: 25 D Hlavný pohon: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 ot./min.) Prívod elektrickej energie: 3 × 380–420 V / 50 Hz Napájacie napätie ovládania: 220 V Chladenie: Sud vzduchom chladený so zónami ohrevu Riadiaca skriňa: Súčasťou, kompletne vybavená relé, ističmi a analógovými meradlami Popis Kompaktný jednošnekový laboratórny alebo maloprodukčný extrudér, vyrobený spoločnosťou Plastik-Maschinenbau GmbH v Západnom Nemecku. Navrhnutý na spracovanie termoplastov, testovanie materiálov, alebo pre malé extrúzne linky (napr. hadičky, profily alebo poťahovacie aplikácie). Dodáva sa s originálnou elektrickou skriňou, manometrom a dokumentáciou. Mechanicky aj elektricky kompletný; vyžaduje iba štandardné sprevádzkovanie.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 40 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 220 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 30 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: 828D, dolžina obdelovanca (maks.): 550 mm, premer obdelovanca (maks.): 400 mm, skupna višina: 1.900 mm, skupna dolžina: 3.010 mm, skupna širina: 2.500 mm, največja hitrost vrtenja: 3.000 obr/min, skupna masa: 5.000 kg, največja hitrost vretena: 3.000 obr/min, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, premer struženja: 400 mm, premer struženja nad prečnim suportom: 570 mm, prehod palice: 87 mm, premer struženja nad ležiščem sani: 570 mm, stružna dolžina: 550 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, GEWA UT300 - Razstavni stroj - Oprema: Krmiljenje: Siemens 828D Pogonske komponente Siemens Centraliziran samodejni sistem mazanja Zunanji ohišje Teleskopska zaščita vodil Transformator Električna omarica Kedpfxoyr A U Ts Adkodi Osvetlitev delovnega območja operaterja Signalna luč (semafor) LCD monitor Linearna vodila Servo konjiček Hidravlična vpenjalna glava Sauter revolverska glava z 12 pogonskimi orodji (BMT55) Merilni sistem za orodja Renishaw Navodila za uporabo stroja Pnevmatska zračna pištola Vodna pištola Oljni separator Transporter za ostružke in rezervoar za hladilno tekočino Ta in druge stroje proizvajalca GEWA Werkzeugmaschinen GmbH si lahko ogledate pri nas (Eifel).

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 550 mm, pomik po osi Z: 550 mm, hitro pomikanje X-os: 42 m/min, hitri pomik os Y: 42 m/min, hitri pomik na osi Z: 42 m/min, nazivna (navidezna) moč: 25 kVA, vrtilni moment: 135 Nm, proizvajalec krmilnikov: Siemens, model krmilnika: 828D, teža obdelovanca (maks.): 600 kg, skupna višina: 3.000 mm, skupna dolžina: 2.600 mm, skupna širina: 2.310 mm, širina mize: 1.000 mm, dolžina mize: 550 mm, obremenitev mize: 600 kg, skupna masa: 5.000 kg, hitrost vretena (min.): 1 obr/min, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 10 h, dovod hladilne tekočine: 30 letvica, moč vretenovega motorja: 19.000 W, nos vretena: HSK63A, število vreten: 1, število mest v zalogovniku orodij: 30, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Vertical Machining Center VM800 - Demonstration Machine - Technical Specifications: Control: Siemens 828D Milling Spindle: 12,000 rpm, HSK63 Internal Coolant Supply (IKZ): 30 bar Bed Flush System Renishaw OMP60 Measuring Probe (Heidenhain optional) Renishaw TS27R Tool Measurement (Heidenhain or BLUM optional) Direct Measuring Systems in X, Y, Z axes by Heidenhain Rotating Inspection Window SPINVISTA (Black Edition) Automatic Door Robot Interface Automatic Power-Off Function Automatic Tool Changer (30 positions HSK63) Centralized, Automatic Lubrication System Telescopic Slideway Covers Electronic Handwheel for Manual Operation Signal Light Machine Operating Manual Kodpfx Adeyr A T Asksdi Pneumatic Air Gun Water Gun Air Gun Chip Conveyor Coolant Tank: 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for inspection at our premises (Eifel).

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 9.000 mm, vrsta nastavitve višine: električni, hitrost brusilnega traku: 25 mm/s, skupna višina: 2.200 mm, skupna dolžina: 4.640 mm, skupna širina: 2.650 mm, skupna masa: 1.200 kg, dolžina brušenja: 2.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 4.640 mm, potrebna širina: 2.650 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinder M2S92-150 with two sanding belts for manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Not for use with aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Sanding unit with contact roller, manually shiftable from belt 1 to belt 2 - Electric table elevation - Flat machine table - Workpiece stop ruler on the machine table - Initial set of sanding belts - CE-compliant design - Operating manual + manufacturer's declaration according to Annex 2 Kdjdpfx Adsv S Sr Rjksi The robust, welded steel frame construction provides exceptionally smooth machine operation. Both machine stands feature offsets that enable processing of longer workpieces. The three-roller belt guidance offers the operator the largest possible open work area, allowing comfortable handling especially with hand sanding blocks. Belt drive is provided by a three-phase motor and balanced drive roller. Each belt is individually adjustable via separate pneumatic tensioners, allowing optimal belt tensioning force per belt. The dust extraction system is dimensioned to effectively capture sanding dust and direct it to the extraction nozzle when attached to a suitable extraction unit. The sanding unit is mounted on play-free roller guides, ensuring low-fatigue operation. The machine table height is easily and quickly adjustable via the electric motor-driven table lift. The table lift guide components are maintenance-free. For loading, the table can be extended so that workpieces do not need to be inserted under the sanding belt. Main control elements are ergonomically positioned in the center of the machine for ease of operation. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in 'Light Grey' The standard configuration is supplied with two initial sanding belts (W x L) 150 x 9000 mm and a contact roller approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling workpieces. The handling device is mounted at the table center beneath the insert frame. To use the handling device, the insert frame is removed from the machine table. The handling device features four vacuum suction pads for holding workpieces and includes: the mounting with rotary axis (with brake disc mounted on the rear). At the front of the rotary axis is the swiveling unit, lockable at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disc on the swivel head enables fine adjustment of the workpiece to the sanding belt. Rotation and swivel axes are pneumatically released via foot switch, with manual rotation of the axis. Maximum workpiece weight when used as a flat table with the insert frame = 80 daN; with handling device on the clamping plate = 25 daN or 120 Nm in relation to the rotary axis center.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements Kodpstwb U Aofx Adkodi - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.