Letvami Okvir nakup rabljenega (1.487)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: Fsdpfx Aex A U Ncjflopb • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: dober (rabljeno), Frame Press, Gluing Press - Operation: hydraulic - Working area up to: 3500 x 2400 mm Fpodpfob A H Dhjx Afleb - Wood clamping: pneumatic - Setup dimensions: 4200/1100/H3700 mm - Transport dimensions: 4200/1200/H2300 mm - Weight: approx. 3500 kg

Stanje: zelo dobro (rabljeno), I am offering a complete industrial process pump in explosion-proof ATEX (EX) design, mounted on a heavy-duty steel skid. The unit is ready for operation in industrial installations, including hazardous area (explosion-risk) zones. Pump manufacturer: Victor Pumpen GmbH (Germany) Model: R40 KM6TM +2A / 88RF38+693De/6-K Electric motor: CEMP (Italy) • Power: 1.5 kW • 3-phase, 230/400 V • 1400 rpm • Protection class IP55 • Explosion-proof design Ex d IIB T4 Gb • ATEX / IEC 60034 certification Gearbox: Siemens – EX version • ATEX certificate II 2D c T120°C • IP55 • Gear oil: CLP VG 220 Fpodpfxjx Ndbwe Aflob • Output speed up to approx. 72 rpm Equipment and design: • Complete skid-mounted unit • Coupling guard • Connection nozzles • Pressure gauge • Industrial, heavy-duty construction • Visual condition: very good Application: The pump is intended for transferring oils, fuels, resins, adhesives, solvents, and other process media. Ideal for the chemical and petrochemical industries, paint shops, EX installations, and applications requiring continuous operation and stable pressure.

Stanje: rabljeno, Hidravlična okvirna stiskalnica Schafberger & Sprödhuber z ročnim električnim nastavljanjem. Višina obdelovanca: maks. ca. 2.400 mm Širina obdelovanca: maks. ca. 4.250 mm Fpedpow I Dbmofx Afleb Upravljanje: Ročno

Stanje: dober (rabljeno), ErgoPack 726X X-Pert stroj za povezovanje palet z vratci Naprava za povezovanje tovora s PP in PET trakovi. Izdelano leta 2022. Zelo dobro ohranjeno. Model 726X ima termo zvarilec in »rep«, ki poteka skozi paleto in dostavi trak do operaterja brez potrebe po sklanjanju. Poleg tega je stroj opremljen z modulom za visoke palete, imenovanim vrata. Fodpfx Asx Nct Ejflopb Opis proizvajalca: ErgoPack 726X se uporablja za povezovanje skoraj vseh vrst tovora s PP (polipropilenskimi) ali PET (poliesterskimi) trakovi. Naprava je popolnoma avtomatska (napenjanje, zvarjenje in rezanje traku). Odlikuje jo visoka učinkovitost in enostavna uporaba, kar zagotavlja odlične rezultate z minimalnim fizičnim naporom. Naprava se upravlja s kontrolne plošče.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Okvirna stiskalnica je v zelo dobrem stanju, bila je strokovno in vestno vzdrževana. Stroj natančno stiska pod kotom in ima visoko pritisno silo. 3 navpični in 2 vodoravna pritisna cilindra, vključno s pritiskalno enoto za poševne elemente. Pritisna sila je fino nastavljiva. Pritisna širina: 3450 mm, višina 2250 mm Dolžina 4350 mm, višina 3000 mm, globina 800 mm Za več informacij nas kontaktirajte po e-pošti ali telefonu. Zasebna prodaja, zato zamenjava, garancija ali jamstvo niso možni. Prodaja je izključena iz kakršnega koli jamstva. Fodpfx Afexgn E Selopb Pošiljanje ni možno.

Stanje: rabljeno, Working width: 3,500 mm Working height: 2,550 mm Number of pressing cylinders: 6 pcs. Loading dimensions (L x W x H): 4,500 x 950 x 2,900 mm Hess Speedy frame press ----- Will be overhauled Max. insertion dimension / pressing length: 3,500 mm Fpjdpfx Aoxnqw Tofleb Max. insertion dimension / pressing height: 2,550 mm Sliding carriage for width adjustment, locking in 50 mm increments Double-hole raster system Electric height adjustment of long-stroke cylinders (hydraulic) Support plate insertion height can be preselected in 4 positions 3 vertical pressing cylinders, stroke 1,000 mm Pressing force per cylinder: 2,000 kN / 20,000 N 3 horizontal pressing cylinders, stroke 80 mm Pressing force per cylinder: 1,250 kN / 12,500 N Press plate depth: 100 mm, width: 140 mm Raster cylinder fixing / support: 50 mm Central pressure beam with shut-off valve End-of-stroke pressure shutdown and post-pressurization control Control and pressing sequence via push-button operation Adjustable pressing pressure: min. 25 – max. 160 bar Electrical connection: 2.2 kW / 400V 3 pcs. tilting pressure plates for angled windows 1 pc. tilting pressure plate for pointed windows 1 pc. extension for tilting pressure plate 1 pc. small parts kit Image and video are not original, but show an identical model ----- (Technical data as per manufacturer – no liability assumed!)

Leto izdelave: 1997, Stanje: rabljeno, machine for gluing and stapling picture frames Fodpedbycaefx Aflopb

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC Fsdpfx Aeqwyclsflepb X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Sale of a complete production line for aluminium frames & insect screens Ideal for window manufacturers, craft businesses & producers For sale is a comprehensive, coordinated set of machinery and workshop equipment for the production of: - Aluminium frames for wood-aluminium windows - Renovation aluminium frames - Insect screen tension frames The equipment is suitable both for established businesses seeking to expand their range of manufacturing capabilities and for start-ups or newcomers wishing to take over a ready-to-use production line. Key features: - Preferably sold as a complete package - Partial sale of individual machines possible - Field-tested, functionally coordinated machines - Independent in-house manufacturing possible - Significant cost savings compared to new procurement Commissioning, training & know-how transfer: On request, I offer the buyer personal training and a thorough induction. The goal is to transfer specialist knowledge acquired over decades. The induction can include: - Introduction to the complete production process - Optimal machine settings - Efficient manufacturing - Avoidance of common mistakes - Support during commissioning Advantages for the buyer: - Immediate start of production - Reduced dependence on suppliers - Diversification of the product portfolio - High added value - Know-how transfer included Fedpox Nbnhofx Afljpb Reason for sale: The sale is due to retirement and a career change. Further information: - Machine list and further details available on request - Scope of training to be arranged - Collection by appointment If interested, please get in touch. I am open to all options and arrangements.

Stanje: rabljeno, Raztezni element okvirja (WS15) HOLZ-HER rabljen- POZOR: cena za komplet 4 kosov! Napetostni pokrov tip O, Napetje na konzoli s preklopnim stikalom, Odpiranje / zapiranje s preklopnim stikalom ----- Tehnični podatki ----- Fpedpfx Aevtrk Aoflsb Razpon vpenjanja: 40 - 115 mm

Stanje: rabljeno, Leto izdelave: 1995, obratovalne ure: 17.720 h, 1995 | Caterpillar 769 C | Gebrauchter Starrrahmen-Muldenkipper | 17.720 Betriebsstunden | 144.761 km 📍 Standort: Frankreich, Commelle-Vernay 🚛 Lieferung an Ihren Wunschort möglich – Nutzen Sie unseren Versandkostenrechner zur Kostenschätzung! 💰 Sofort-Kaufen-Preis: 34.800 EUR oder unterbreiten Sie Ihr Angebot. Fsdpfx Afox N Uvfslspb Zahlung bei Lieferung gegen geringe Gebühr möglich (vorbehaltlich Genehmigung)* 👷‍♂️ Unabhängig durch einen Experten begutachtet 61 Inspektionspunkte: 51 genehmigt ✅, 8 mit Abweichungen ℹ️, 2 mit Beanstandungen ⚠️ 📌 Kommentar des Inspektors: Guter Allgemeinzustand, einige Undichtigkeiten müssen abgedichtet werden, fortgeschrittener Verschleiß des Muldenbodens. Lieferung inklusive 2 zusätzlicher Reifen und 1 Felge. 📄 Sie möchten die vollständige Inspektion, weitere Fotos oder ein Video sehen? Tipp: Die Referenz „33792 Equippo“ wird häufig für weiterführende Online-Recherchen verwendet. 💡 Warum diese Maschine und unser Service herausragen: ✔ Gründliche Überprüfung durch Fachleute ✔ Baustellenlieferung möglich ✔ Geld-zurück-Garantie ✔ Sichere und flexible Zahlungsoptionen 🔄 Sie interessieren sich für weitere Maschinen? Wir bieten hilfreiche Tools und Ressourcen für alle Maschinenbesitzer und Betreiber – einfach über unsere Plattform zugänglich.

Stanje: dober (rabljeno), Koda: 0160 Znamka: SMC Model: REGO 92 CP Avtomatska oleodinamična stiskalnica s pomično prečko za lesene okvirje, krila, vrata, podboje in različno - CE standard Fsdpfx Afowx Ru Aslepb Tehnični podatki: Uporabne delovne dimenzije: 3000 x 2000 mm Št. 2 vodoravnih cilindrov Št. 2 navpičnih cilindrov Motor: 3 kW Št. 2 položaja za podporo prečke Nadzorna plošča s tipkami Varnostne fotocelice Skupne mere: 3600 x 1300 x 2800 mm (v) Teža: 1850 kg

Stanje: rabljeno, Tehnični podatki: 3 sekcije dolžine 6.400 mm Sekcije stiskalnice lahko delujejo skupaj ali posamezno Največja dimenzija lepljenega elementa: 4.600x1.180x200 mm v eni sekciji Hidravlični pritiski: 24 zgornjih/navpičnih – 8 na sekcijo Prednji navpični pomični uporni pritiski: 24 – 8 na sekcijo Napajanje: 400 V Fodpfx Aox Id Dieflepb Moč motorja: 2,2 kW Skupne dimenzije: Dolžina: 19.200 mm Širina: 1.200 mm Višina: 2.300 mm

Stanje: dober (rabljeno), Leto izdelave: 1998, Universally applicable frame dowel and slot mortising machine with angle adjustment Specifically designed for staircase construction, window manufacturing, and versatile use thanks to pneumatic height adjustment Angled dowelling and baluster drilling are easily accomplished thanks to the swiveling drilling unit. Two-speed pole-switchable motor Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via practical handle switch Equipped with Röhm two-jaw chuck 1 - 20 mm Linear laser for precise positioning of the workpiece Drilling unit swivels 65 degrees to the left and right Pneumatic adjustment of the processing height, allowing dowelling on two levels without re-setting Desired drilling heights on each drilling level can be set via digital counter; switching between levels is pneumatically controlled from the front Cross adjustment 340 mm, stepless or in 12 mm increments using indexing rail Pneumatic clamping possible at any position, can be operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column movable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round bar Assorted drill bits Operating manual CE marking The machine has been partially repainted due to existing paint splashes. Fjdpfx Aoxmatnoflopb Pneumatic hoses renewed Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this provider."

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Oprema in tehnični podatki: - 2-čeljustna vrtalna glava za steblo do 20 mm premera - Pnevmatska nastavitev položaja na 2 nivojih 0-100 mm - Največja globina vrtanja 150 mm - Precizna rastrovna letvica 12 mm - Centrirna aretacija in prečna nastavitev - 2 pnevmatska varnostna vpenjalna cilindra - Motor 1,5 kW - Število obratov 2800 obr/min Dimenzije (brez prislona): 1100 x 1100 x 1500 mm Teža: pribl. 310 kg Fodpfjwkba Hjx Aflepb Dobavljivost: takoj Lokacija skladišča: Röllbach

Stanje: rabljeno, Edge sanding machine LÖWER RSM 280 SX -used- Frame sanding machine Sanding shoe, Oscillation, Frame sanding device, Feed belt, Belt cleaning system ----- Technical Data ----- Sanding width: 190 mm, Max. workpiece thickness: 120 mm, Feed speeds: 6, 11, 16 m/min, Fjdpfsu R Tbhjx Afljpb Motor: 5.5 kW, Weight: 550 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, A-okvirji za steklo za velike dimenzije. Nosilnost 12.000 kg. Fjdpfx Afjxxi Huelopb

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Ruchser roller conveyor for windows with 90° rotation device left/right, length 4400 mm. Electrically driven accumulation rollers with two parallel conveyor sections, pneumatically tiltable from vertical to 7° outward on the outside and 7° inward on the inside. Conveyor sections are 1900 mm high with rubber roller strips. Between the rubber strips, 2 mm deep stainless steel sheets serve as sliding surfaces for clip holders. Infeed and outfeed equipped with edge protection rollers (up to 3000 mm high) as rubber rollers. Infeed conveyor: 2000 mm; outfeed conveyor: 4000 mm, both with driven accumulation rollers. Fpsdpfx Aelpcc Ieflsb Control and operator panel mounted on a freely adjustable stand.

Stanje: rabljeno, kapaciteta rezervoarja: 8.651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manhole diameter approx. 480 mm; overall height incl. agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Internal diameter: 2,000 mm Total height: 4,550 mm Heating/cooling: available Power: 5 / 15 kW Max. permissible operating temperature: 220 °C Max. permissible operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: beam agitator Base type: ring Location: Bremen Technical documentation: drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Jacket volume: 313.0 liters Fpodpoxqavdofx Afljb Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: chemical industry VESSEL Max. permissible operating temperature: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manhole/dome: on top head Comment: Motor missing, manhole cover plated Outlet: 105 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm AGITATOR 1 Agitator arrangement: central, on top head Agitator equipment: Agitator element: frame blade agitator; agitator motor missing but available from manufacturer; various agitator technical documents available Top head wall thickness: 14 mm.

Stanje: rabljeno, Gater Pini & Kay FN65 HH Prehodna širina: 650 mm Pogonski motor: 33 kW z žaginimi listi z obešanjem z vmesnim prenosom z razcepalnim klinom Fjdpfx Afjxvz Hzslepb takoj na voljo Lokacija: Avstrija, blizu Gradca

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Fedsw I Uy Topfx Aflopb Leto izdelave: 1993 Oprema in tehnični podatki: Vpenjalna glava z 2 čeljustmi do Ø 20 mm stebla Pnevmatska nastavitev pozicije na 2 nivojih 0-100 mm Maks. globina vrtanja: 150 mm Precizna zobata letev 12 mm Sredinska zapora in prečno nastavljanje. 2 pnevmatska varnostna vpenjalna valja Motor 1,5 kW Št. vrtljajev: 2800 o/min Nastavljiva enota za podolgovate izvrtine z 2 programskima ekscentroma Teža stroja ca. 310 kg Velikost stroja (ŠxGxV) 1100 x 1100 x 1500 mm (brez prislona) Razpoložljivost: hitro dobavljivo Lokacija: Röllbach

Stanje: dober (rabljeno), Tehnični podatki o profilih okvirja: Regalni sistem: SSI Schäfer Tip: PR 600 Vključeno v dobavo: 01x profil okvirja, novo blago Barva materiala: sendzimir pocinkano Tip stojala: P73 Mere profila: 75 x 75 x 2,0 mm Višina: 10.694 mm Vaši kontaktne osebe pri nas: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Fpedpfjx Dil Uox Afljb Ta izdelek je na voljo samo za osebni prevzem. Prevoz ali pošiljanje izdelka po želji je povezano z dodatnimi stroški, ki jih lahko povprašate pri nas glede na kraj dostave ali obseg dostave.

Stanje: rabljeno, kapaciteta rezervoarja: 8.609 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of steel; manway diameter approx. 480 mm; tank interior with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Top head: removable/top-hinged top cover Agitator: blade agitator Support type: ring Location: Bremen Technical documentation: drawing Jacketed cylinder: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,190 mm Previous application: chemical industry TANK Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum: 1.0 bar Jacketed bottom: half-pipe coil Fsdpfoxqau Tjx Afljpb EQUIPMENT Manway / hatch: on the top head Remark: Motor missing, manway cover missing Outlet: 100 mm MATERIAL SPECIFICATION Jacket system material: V4A 1.4571 (AISI316) Flange material: steel AGITATOR 1 Agitator manufacturer: Ekato TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator equipment: Agitator type: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm

Stanje: novo, Technical data for the base plate: Racking system: Nedcon Type: NS Fpedpforfdalex Afljb Year of manufacture: 2024 -new- IMMEDIATELY AVAILABLE Included in delivery: 01x base plate, new Material colour: RAL 5019 Capri blue Material thickness: approx. 3.50 mm Suitable for frame profile width: 100 mm Total width: approx. 200 mm Total depth: approx. 93 mm Total height: approx. 43 mm Hole spacing: approx. 145 mm Hole diameter: approx. 15 mm Weight per piece: approx. 0.663 kg General information about this item: This item is only available for collection. Should you require transport or shipping of this item, additional costs will apply. The exact charges can be requested from us depending on the delivery location and scope of delivery.