Lesa Sušilnik Lesa Suhe Komore nakup rabljenega (13.137)

Stanje: novo, konfiguracija osi: 2 osi, Referenčna številka: 15 Dodpfxoytd Dls Agpoup

Stanje: novo, konfiguracija osi: 2 osi, barva: modra, Referenčna številka: 15 Dsdpfxeytduqe Agpsup

Stanje: novo, konfiguracija osi: 3 osi, barva: rdeča, Leto izdelave: 2022, Voziček za cevi • Popolnoma po željah kupca • Nosilnost od 6 do 25 ton • Dolžina po meri • Z zavorami ali brez Dsdpjytdchofx Agpoup Stanje: Novo Leto izdelave: 2022

Stanje: rabljeno, Nov hladilni sušilec stisnjenega zraka, sušilec stisnjenega zraka neuporabljen iz zaloge Razvlaževalnik stisnjenega zraka SMC tip IDFA3E-23 Sušilec stisnjenega zraka, razvlaževalnik stisnjenega zraka Tov. št.: PP0213S Leto izdelave: 2011 Sušilec stisnjenega zraka SMC IDFA velikost 3E Pretok na uro: 12.000 litrov/h (12 m³/h) Pretok na minuto: 200 litrov/min. Obratovalni tlak maks. 10 bar Obratovalni tlak 0,15 do 1,0 MPa (po navedbi proizvajalca) Hladilno sredstvo: R134a Temperaturno območje: 5°C do 50°C Poraba energije: 180 vatov Električni priključek: 230 V, 50 Hz, 1,2 A Priključni cevni navoj: 3/8" - Izmenjevalec toplote iz nerjavečega jekla, zračno hlajen kondenzator - Ločevalnik kondenzata z avtomatskim izpustom - Izpust kondenzata preko cevi Dimenzije D x Š x V: 410 x 226 x 473 mm Teža: 18 kg Nov, neuporabljen, kot nov iz zaloge Djdpfsyif I Ujx Agpsup

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 7899 Tehnični podatki: - Presek vstopa drobilca: 410 mm x 180 mm - Širina gredi: 430 mm - Premer gredi: 400 mm - Število nožev: 2 kos - Dimenzija sita: 60 x 60 mm - Zgornji pogonski, zobati valj - Spodaj 2 pogonska, zobata valja - Dolžina dovajalnega traku: 2180 mm - Širina dovajalnega traku: 400 mm - Avtoreverz (z možnostjo nastavitve) - Glavni motor: 30 kW - Pogonski motor: 2×2,2 kW - Mere stroja (d/š/v): 4300 x 1600 x 1100 mm - Teža približno: 2000 kg PREDNOSTI – italijanska proizvodnja – brez barve Dusdpfsymfg Iex Agpsp – električna nastavitev višine ohišja – rabljena večlistna žaga, zelo dobro ohranjena Neto cena: 69.900 PLN Neto cena: 16.640 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo ob večjih nihanjih tečaja)

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 10.631 h, nosilnost: 1.400 kg, dvižna višina: 5.316 mm, vrsta goriva: električni, tip droga: triplex, lastna masa: 1.550 kg, prevoženi kilometri: 10.631 km, THREE UNITS IN STOCK This electric TRIPLEX stacker from the brand Still, built in 2015, is in good condition. The capacity is 1,400 kg. The stacker lifts up to a height of 5,316 mm. Dedswa Ac Uspfx Agpeup Drive-through height: 2,265 mm. Equipped with FREELIFT. Fitted with INITIAL LIFT, making it ideal for uneven floors. The battery features an automatic filling system and an external charger. Schedule an appointment for a test drive. Watch the video on YouTube. FINANCIAL LEASE POSSIBLE, Calculation is subject to credit approval and changes in interest rates and fees, final calculation via our external partner*

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), BURKLE PROCESS TECHNOLOGIES Nozzle Dryer System PASS-THROUGH DRYER TRDUE 700 Duedpfxod R Sb Ie Agpep - Single-sided drying of various materials on flat workpieces - Workpieces can be heated using the integrated infrared emitter

Stanje: novo, Leto izdelave: 2026, With the ERBA Granulate Dryer EVK 350, workpieces can be easily separated from the granulate using the integrated screening unit. The unit features outstanding drying performance, a direct heating system, and digital temperature control. The work container is fully coated with polyurethane on the inside. The EVK 350 can be integrated with other machines for a seamless production line. Technical data: - Gross volume: 350 litres - Unbalance motor power: 2.2 kW - Heating power: 3.6 kW - Speed: 1,400 rpm - Internal container diameter: 1,210 mm As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for your optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories, which are optional and subject to additional charges. If you are interested, we look forward to hearing from you. We provide non-binding and expert consultation. Dujdpeyq Rcvsfx Agpsp The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which will inform you about our general terms and conditions, imprint, and right of withdrawal before the purchase/contract is concluded.

Stanje: novo, Leto izdelave: 2026, With the ERBA Granulate Dryer EVK 500, workpieces can be easily separated from the granulate using the integrated screening system. The unit features excellent drying performance, a direct heating system, and digital temperature control. The working container is fully polyurethane-coated on the inside. The EVK 500 can be linked with other machines for integrated operation. Technical specifications: - Gross volume: 500 L - Imbalance motor power: 4.0 kW - Heating power: 4.8 kW - Speed: 1,400 rpm - Internal drum diameter: 1,440 mm As an experienced partner, we offer expert support in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. Djdpfxoyq N Dfj Agpoup Prices are net plus applicable statutory VAT and freight costs. Photos may show the system including optional accessories that are available separately and may incur additional charges. If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunications (e-mail, telephone, message portal). We will first submit a non-binding offer, in which we will also inform you about our general terms and conditions, imprint, and the right of withdrawal, before any sale/contract conclusion takes place.

Stanje: novo, Leto izdelave: 2026, Aluminum angled conveyor belt with substructure including leveling and adjustable machine feet for compensating uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Knee angle: 45° Dedsyhzhzspfx Agpoup Height of the horizontal section: 350 mm Total conveyor length (measured on the floor): 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Reinforced double profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller made of welded and machined S235 steel Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400 V, 50 Hz, protection class IP54 Drive pre-wired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with wave edge, petrol matt Belt width: 600 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 42 pcs. T-40 cleats, 400 mm long, approx. 401 mm pitch Belt material: 2-ply, highly cross-stable At the angled section, the belt is guided on both sides with three hold-down rollers each Belt is supplied with a 70 mm edge-free zone on both sides Due to the wave edges on both sides, the usable belt width is reduced Usable width: 300 mm, calculated as follows: (Top view) Cross configuration 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC V-guide rib on the running surface profile – 10x6 mm - Including widened substructure for head load stability - Including cut-out in the discharge plate - Including slide bearings in the drive and return roller - Including magnet-free zone for overband magnetic separator area - Including bracket for DMPM1200 in the incline section Discover tailor-made solutions for your industry! As an innovative mechanical engineering company, we are proud to offer customized solutions for the recycling, food, and further processing industries. Our extensive product portfolio includes everything from conveyor systems, flat belt conveyors, inclined conveyors and angled conveyors, to Z-conveyors. We also manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnet separators, and dosing bunkers – all tailored to customers’ specific requirements. We understand that each industry and project is unique. That’s why we custom-build our solutions to meet your specific needs and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For every problem, we find the right solution – no matter how specialized the requirements! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together we will shape the future of your production processes! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal-free, metal detection, neodymium, overband magnet, magnetic belt separators, lifting magnets, filter rods, magnetic grids, grate magnets, metal separators, block magnets, filter systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Aluminum angle conveyor with support frame including adjustable feet and machine leveling feet for compensating uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length (measured on the floor): 5,000 mm Discharge height: 2,000 mm Horizontal height: 500 mm Design features: Aluminum modular construction - Reinforced triple profile 135x45 mm - Fully covered 2.0 mm galvanized steel discharge plate Drive roller + return roller made of S235 steel, welded and machined Ø150x820 mm crowned, shaft fixed with pillow block bearings. Drive: Direct-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive prewired up to motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 15/4 0+007 PVC incl. wave-edge PVC, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm pitch Belt material: 2-ply, with high transverse stability Dedpfx Agoyhzhuepeup In the bend, the belt is guided on each side by 3 hold-down rollers. Belt has a 70 mm edge-free zone on both sides. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover customized solutions for your industry! As an innovative mechanical engineering company, we take pride in offering tailored solutions for the recycling, food, and processing industries. Our comprehensive product portfolio includes everything from conveyor systems, flat belt conveyors, incline conveyors, and angle conveyors to Z-shaped conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnets, drum magnets, and dosing bunkers—all designed according to our customers’ specific requirements. We understand that every industry and project is unique. That is why we customize our solutions to your specific wishes and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special orders—for every problem we find the right solution! Put us to the test! Contact us and discover how we can turn your requirements into tailored solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyors, magnetic separators, overband magnets, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grates, magnetic grids, metal separators, block magnets, filtration systems, dosing bunkers, feed hoppers, filling systems

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Aluminium Z-shape conveyor belt with substructure including adjustable feet and freely swiveling transport castors with locking brakes Horizontal section: 800 mm Ascending section: 3,000 mm Second ascending section: 1,200 mm Incline angle at each bend: 60° Total conveyor length (measured on the ground): 3,500 mm Height of the horizontal section: 400 mm Design: Aluminum construction design Dsdjyhzhnspfx Agpsup - Double-reinforced profile 90x45 mm - Full-surface discharge plate, 2.0 mm galvanized Drive roller + return roller S235 steel, welded and machined Ø100x720 mm, cambered and turned, shaft fixed with pillow block bearings Drive: Direct-mounted gear motor, 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50Hz, protection class IP54 Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU with waved PU edge in petrol, matte, AS, especially cross-stable with hard cover Conveyor belt width: 700 mm 2 pcs. waved side edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats centrally positioned, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a borderless zone of 70 mm on each side. Due to the waved side edges, the usable width of the conveyor belt is reduced: Usable width: 500 mm, comprised as follows: (Top view) Lateral arrangement 70+25+5+500+5+25+70 mm Belt guidance via PVC guide strip on running surface profile - 10x6 mm - including cutout in the discharge plate - including slide bushings in the drive and return rollers

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 75.152 km, moč: 375 kW (509,86 KM), prva registracija: 12/2021, vrsta goriva: dizel, lastna masa: 16.350 kg, največja dovoljena obremenitev: 9.650 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x6, gorivo: dizel, zavore: retarder, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, prostornina tovornega prostora: 12.809 m³, Leto izdelave: 2021, obratovalne ure: 2.684 h, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, retarder, zapora diferenciala, žerjav, Mercedes Benz Arocs 3351/6x6/Palfinger Epolsion S260/Log Transport Vehicle • Manufacturer: Mercedes Benz • Model: Arocs 3351 • Mileage: 75,152 km • First registration: 2021 • Power: 375 kW / 509 hp • Drive configuration: 6x6 • All-wheel drive • Refueling system • Retarder/Intarder, 3-stage • Corner mirrors • Palfinger Epolsion S2602 crane • Crane hours: 2,684 h • Grapple: Palfinger FG57X • Fifth wheel: Jost JSK37C Dedpfx Ajwxdncegpeup • Differential lock, 3 stages • Transmission: Automatic • Navigation system • Air conditioning • Voltage converter • Long-distance cab • Auxiliary heater (parking heater) • Radio • Suspension: leaf/air • Unladen weight: 16,350 kg • Payload: 9,650 kg • Perm. gross weight: 26,000 kg • Emission standard: Euro 6 • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale in accordance with our terms and conditions.

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 4300 kg Premiki X-osni pomik: 3860 mm Z-osni pomik: 185 mm Y-osni pomik: 1793 mm Glavni pogon Število osi: 3 Hitrost vretena: 24.000 min⁻¹ Moč motorja vretena: 17 kW Ta 3-osni Weeke CE OPTIMAT BHC VENTURE 3 je bil izdelan leta 2002. Opremljen je z močnim glavnim motorjem z močjo 17 kW in največjo hitrostjo vretena 24.000 min⁻¹. Delovno polje meri 3250 × 1250 × 1215 mm s hitrim pomikom 100/50/20 m/min. Idealen za raznovrstna CNC obdelovalna dela z lesom, zahteva 7 barov stisnjenega zraka in ima kapaciteto odsesavanja prahu 3170 m³/h. Za več informacij o tem stroju nas kontaktirajte. Tipi uporabe Djdpfx Asx D Inzsgpjup CNC obdelava lesa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 woodturning lathe with a center height of 250 mm. The machine was in use in our in-house turning courses, is in very good condition, and has been refurbished and inspected by our qualified personnel. (Fully operational) Technical data: - Center height: 250 mm - Distance between centers: 1,000 mm - Spindle thread: M33 x 3.5 with MK3 taper and ASR (Euro) anti-rotation groove - Spindle bore (diameter): 20 mm - Tailstock quill: 150 mm / MK3 - Tool rest (top): 300 mm - Weight: 270 kg - Dimensions (L x W): 1,800 x 640 mm - Motor: 2.2 kW (3 HP) Dsdpfxsrtqi Io Agpjup - Speed range: 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! If you are interested in this machine, please include your complete address details in the contact form so that we can process your inquiry seriously. Thank you! Best regards, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, woodturning, turning, turning tools, wood turning, machine Reference: DH25500-K

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an almost new HAGER STAR 200 MAX wood lathe with a 640 mm distance between centers. The exhibition machine is in original condition, so you will receive the full warranty. Technical Specifications - Center height: 200 mm - Distance between centers: 640 mm (extendable*) - Infinitely variable speed: 300 – 2,900 rpm Dujdpfx Aetpnzdsgpjp - Hollow spindle Ø = 15 mm with internal taper MK2 - Quill travel: 100 mm - Motor: 1.5 kW / 2 HP / 400 V (includes 230 V plug!) - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your complete address in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related keywords: woodturning lathe, lathe, turning machine, wood lathe, woodturning, woodturning tools, wood turning, turning, machine, Hager Reference: R-A0117

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, EXHIBITION MACHINE For sale is an as-new TEKNATOOL Comet 2 DR wood lathe including stand, with a maximum distance between centers of 400 mm. The exhibition machine is in its original condition, therefore you receive the full warranty. Technical Data: - Center height: 150 mm - Distance between centers: approx. 400 mm (extendable) - 3 speed ranges (belt stages): 250 – 680 / 530 – 1,420 / 1,380 – 4,000 rpm - Digital speed display Dsdpovbcm Rsfx Agpoup - Spindle thread: M33x3.5 with ASR (Euro) safety groove - Spindle and tailstock: MT2 - Motor: 0.6 kW / 0.75 HP - Forward / reverse operation - Tool rest: 150 mm - Weight approx. 32 kg - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! If you are interested in this machine, please provide your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, turning lathe, lathe, woodturning lathe, woodturning, turning tools, wood turning, turning, machine

Stanje: dober (rabljeno), Leto izdelave: 2018, Nizkoobratujoči enogredni drobilnik za različne vrste lesnih odpadkov iz mehkega in trdega kosovnega lesa v obliki klad, ostankov, odpadkov vseh vrst lesnih plošč, odpadkov palet ter desk z žeblji, ter drugih oblik lesa, katerih dimenzije ne presegajo vhodnih mer ponujanega stroja. Osnovne informacije: Material za drobljenje: mokri žagarski odpadki Dodatna oprema: - segmentirana podloga in potiskač (štiristransko) - hidravlični sistem z “fast hydraulic” - “ram comb” - izolirani ležaji tipa K Duedpfx Agsymx Ufepop - dodatna vrsta rezil na rotorju - polžasti transporter za odvod sekancev (1200EU) - logspacer - dodatni izhodi v krmilni omari za upravljanje izhodnih transportnih trakov

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) Dusdpfx Aged E R D Sspjp - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Dusdpfx Agsdwktkepop Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: Djdpfx Agox Af Rdopeup - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: novo, Leto izdelave: 2026, Yanigav FB90 Log Splitter • Weight: 1,080 kg • Splitting Force: 32 t • Drive: Hydraulic pump • Log Length: up to 115 cm • Log Diameter: 30–80 cm Duedjr D Nhmspfx Agpjp • Wedge Length: 45 cm

Stanje: novo, Leto izdelave: 2026, Yanigav Log Splitter FBH 210 / FBH210G / FBH210 E Dujdpfjr D Nhqjx Agpsp • Weight: 470 kg / 550 kg / 700 kg • Dimensions (LxWxH): depending on model and carriage length (1.51 m; 1.81 m; 2.11 m) • Force: 15 t / 19 t / 7.5 kW • Drive: PTO hub drive / hydraulic pump / three-phase electric motor • Log length: 121-211 cm • Wedge length: 260 mm Price: €5,600 / €7,500 / €10,000

Stanje: novo, Leto izdelave: 2026, Yanigav Wood Splitter FB9 / FB9G • Weight: 360 kg / 440 kg Dsdpfx Ager D Ng Ejpeup • Dimensions (LxWxH): 1.0 x 1.0 x 2.7 metres • Force: 15 t / 19 t • Motor: Hub drive PTO / Hub drive PTO • Log length: 50–110 cm • Log diameter: 30–70 cm • Wedge length: 30 cm Price: €3,100 / €4,100

Stanje: novo, Leto izdelave: 2026, Yanigav FB25 Log Splitter Duodpfxsr D Ng Tj Agpjp • Weight: 730 kg with hydraulic winch • Dimensions (LxWxH): • Splitting force: 25 t • Motor: PTO-driven hub drive • Log length: 50–115 cm • Log diameter: 35–80 cm • Wedge length: 35 cm