Krog Revije Zakivač nakup rabljenega (616)

Leto izdelave: 2020, stanje: dober (rabljeno), Žerjavna vilica, nakladalna vilica, nosilna vilica, paletna vilica, žerjavna paletna vilica, dvižno orodje, dvigalo za valje - Žerjavna vilica: z nastavljivim utežnim izravnavanjem - Tip: dvižno orodje 630x475 - Nosilnost: 250 kg - Dolžina vilic: 490 mm - Uporabna višina: 610 mm - Dimenzije: 635/520/V795 mm - Lastna teža: 21 kg Dsdpfex E S Azsx Ad Asup

Stanje: novo, Condition: New Delivery time: approx. 3-6 weeks from order Country of origin: Turkey Price: €5,010 Leasing rate: €96.69 Dedpfxsx Urqwe Ad Aoup Load capacity: 100 kg Rated center of gravity: 150 mm Rated eccentricity: 150 mm Table rotation: 360° Tilting nominal torque: 120 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.25 kW Tilting motor: 0.25 kW Rotation speed: 0.1 - 3 rpm Tilting time: 30 s Table diameter: 350 mm T-slots: M12x6 mm Height of rotation center (horizontal position): 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting processes. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control unit, and are structurally optimally protected. For heavy workpieces, the positioners are fixed to the floor. The tables feature radial T-slots for quick clamping of workpieces. Tilting and rotation are performed via steel gears. For safety, the positioner is equipped with a reduction gear that holds the table securely in the desired position. Foot pedal Connection for signal to welding machine Touch panel for the following functions: - Rotation speed - Operating mode (manual, segment cycle, circular) OPTION: Pneumatic centering device

Stanje: novo, Condition: new Delivery time: approx. 3–6 weeks from order Country of origin: Turkey Price: €24,400 Leasing rate: €468.48 Dsdox Urqdspfx Ad Aoup Load capacity: 3,000 kg Rated load center: 150 mm Rated eccentricity: 150 mm Table rotation: 360° Nominal tilting moment: 135 kgm Voltage / Frequency: 400 / 50 V / Hz Rotation motor: 1.1 kW Hydraulic motor: 1.1 kW Table diameter: 1,200 mm Height of rotation center (horizontal): 700–950 mm The hydraulic positioners are available in standard sizes for load capacities from 1,000 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally well protected. For heavy workpieces, the positioners are floor-mounted. Tilting and rotation are accomplished via steel gears. For safety, the positioner is equipped with a reduction gearbox that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Stanje: novo, Leto izdelave: 2025, Condition: New Year of manufacture: 2025 Stock number: 020157 Delivery time: immediate, interim sale reserved Country of origin: Turkey Price: €6,320 Lease rate: €121.98 Dujdjyq St Nopfx Ad Asp Stock quantity: 1 Load capacity: 250 kg Rated load center: 150 mm Rated eccentricity: 150 mm Table rotation: 360° Nominal tilting moment: 360 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.37 kW Tilting motor: 0.25 kW Rotation speed: 0.1 – 3 rpm Tilting time: 30 s Table diameter: 600 mm T-slots: M16x6 mm Height of rotation axis (horizontal): 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of motor, gearbox, table tilting system, steel gears, and control unit, all structurally optimized and protected. For heavy workpieces, the positioners are anchored to the floor. The tables feature radial T-slots for quick clamping of workpieces. Tilting and rotating actions are powered by steel gears. For safety, the positioner is equipped with a reduction gearbox that holds the table in the desired position. Foot pedal Connection for signal to welding machine Touch panel for the following functions: - Rotation speed - Operating mode (manual, segment cycle, circular) OPTION: Pneumatic centering device

Stanje: novo, Condition: New Delivery time: approx. 3-6 weeks from order Country of origin: Turkey Price: €11,000 Leasing rate: €211.2 Load capacity: 1,000 kg Rated load centre: 150 mm Rated eccentricity: 150 mm Rated tilting moment: 360 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.55 kW Tilting motor: 0.75 kW Rotational speed: 0.1 - 3 rpm Tilting time: 60 s Table diameter: 1,200 mm T-slots: M20 x 6 mm Height of rotational axis (horizontal position): 1,000 mm Dodpfx Asyq St Aed Aeup The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for turning and tilting operations. Positioners consist of a motor, gearbox, table tilting system, steel gears, and control unit, and are structurally optimally protected. For heavy workpieces, the positioners are anchored to the floor. Tables feature radial T-slots to enable quick clamping of workpieces. Tilting and rotation are achieved via steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Connection for signal to welding machine Touch panel with the following functions: - Rotation speed - Operating mode (manual, segment cycle, circular) OPTION: Pneumatic centering device

Stanje: novo, Condition: new Delivery time: approx. 3–6 weeks from order Country of origin: Turkey Price: €7,730 Leasing rate: €149.19 Load capacity: 500 kg Rated load center: 150 mm Rated eccentricity: 150 mm Rated tilting moment: 360 kgm Voltage / Frequency: 230 V / 50 Hz Rotation motor: 0.37 kW Tilting motor: 0.37 kW Rotation speed: 0.1 – 3 rpm Dujdpfxoyq Stvj Ad Asp Tilting time: 45 s Table diameter: 800 mm T-slots: M20 x 6 mm Height of rotation center (horizontal): 640 mm The positioners are available in standard sizes for load capacities from 150 kg up to 3,000 kg. The frame is designed for optimal turning and tilting operations. Positioners consist of a motor, gearbox, table tilting system, steel gears, and controls, and are structurally optimally protected. For heavy workpieces, the positioners are bolted to the floor. The tables are equipped with radial T-slots for quick clamping of workpieces. Tilting and rotation are achieved via steel gears. For safety, the positioner is equipped with a reduction gearbox that holds the table in the desired position. Foot pedal Connection for welding machine signal Touch panel for the following functions: - Rotation speed - Operating mode (manual, segment cycle, circular) OPTION: Pneumatic centering device

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks ex works Country of origin: Turkey Price: €134,000 Leasing rate: €2,532.60 Bending length: 3,100 mm Max. bending capacity (mild steel): 25 mm Max. plate thickness without prebending at D = 5x top roll: 25 mm Max. plate thickness without prebending at D = 3x top roll: 20 mm Max. plate thickness without prebending at D = 1.5x top roll: 20 mm Max. plate thickness with prebending at D = 5x top roll: 20 mm Max. plate thickness with prebending at D = 1.5x top roll: 16 mm Top roll diameter: 360 mm Lower roll diameter: 360 mm Side roll diameter: 270 mm Max. opening: 60 mm Working height: 1,510 mm Motor power: 22 kW Length: 5,560 mm Width: 2,060 mm Height: 2,050 mm Weight: 16,750 kg 4 rolls PLC Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic lower roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Conical bending device Dujdpfxoypbquj Ad Asp Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment complies with CE regulations OPTIONS: Upper and side plate supports NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 12–14 weeks from order Country of origin: Turkey Price: €70,300 Leasing rate: €1,328.67 Bending length: 3,100 mm Max. bending capacity – mild steel: 8 mm Max. plate thickness without prebending at D=5x top roll: 8 mm Max. plate thickness without prebending at D=1.5x top roll: 6 mm Max. plate thickness with prebending at D=5x top roll: 6 mm Max. plate thickness with prebending at D=1.5x top roll: 5 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 825 mm Motor power: 11 kW Length: 4,880 mm Width: 1,160 mm Height: 1,200 mm Weight: 6,450 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gear Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Djdpfxjypbqnj Ad Ajup Equipment according to CE regulations OPTIONS: Top and side plate supports NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €95,000 Leasing rate: €1,795.50 Bending length: 3,100 mm Max. bending capacity (mild steel): 13 mm Max. sheet thickness without pre-bending (mild steel): 12 mm Max. sheet thickness with pre-bending (mild steel): 8 mm Max. sheet thickness without pre-bending at D=5x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Djdpoypbqhsfx Ad Ajup Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 5,310 mm Width: 1,660 mm Height: 1,590 mm Weight: 10,050 kg 4 rolls PLC Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity on all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop-end bearing Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in accordance with CE regulations OPTIONS: Top and side sheet support NC control IMPORTANT NOTES FOR CONE ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €62,600 Leasing rate: €1,183.14 Bending length: 2,050 mm Max. bending capacity - steel: 13 mm Max. plate thickness with pre-bending - steel: 10 mm Max. plate thickness without pre-bending at D=5x top roll: 13 mm Dujdpfx Ajypbqbsd Ajp Max. plate thickness without pre-bending at D=1.5x top roll: 10 mm Max. plate thickness with pre-bending at D=5x top roll: 10 mm Max. plate thickness with pre-bending at D=1.5x top roll: 8 mm Top roll diameter: 240 mm Bottom roll diameter: 240 mm Side roll diameter: 190 mm Working height: 820 mm Motor power: 11 kW Length: 3,830 mm Width: 1,160 mm Height: 1,200 mm Weight: 5,000 kg 4 rolls PLC Fully hydraulic drive for top and bottom rolls (for bending capacity ≥ 30 mm, all four rolls driven via planetary gear) Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Hydraulic drop-end Movable control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Upper and side sheet supports NC control IMPORTANT POINTS FOR CONICAL BENDING: Max. sheet thickness is 50% of the nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: novo, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Bending length: 2000 mm Max. bending capacity – mild steel: 11 mm Max. sheet thickness without pre-bending at D=5x top roll: 11 mm Max. sheet thickness without pre-bending at D=1.3x top roll: 7 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.3x top roll: 6.4 mm Top roll diameter: 225 mm Lower roll diameter: 215 mm Side roll diameter: 165 mm Rolling speed: 8 m/min Length: 3950 mm Width: 1200 mm Height: 1200 mm Weight: 4450 kg Hardened and polished rolls Siemens PGS-Classic numerical control with touchscreen Cone bending with electronic control and tilting lower roll Oil cooler Simultaneous rotation and rolling movement Simultaneous movement of rolls and supports Ability to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning via PLC for greater accuracy Stepless variable speed for the rolling movement Stepless variable speed for rotation Prepared for retrofitting with supports (up to 5 axes) Prepared for retrofitting with loading/unloading stations Prepared for retrofitting with CNC controls Extra-large, double-mounted swing bearing Electronic parallelism system for roll synchronization Hydraulic top roll lifting (for models with top roll diameter from 205 mm) Double linear guideway for lower roll movement Ultra-wide roll blocks "MCS" bearing system for lower rolls (4 large bearings per shaft) Centralized lubrication system Pressure gauge for constant clamping roll control Extra torque and special braking system Emergency stop safety pull cord Equipped according to "CE" regulations Dsdjypbp Rjpfx Ad Asup OPTION: Siemens PSG-Absolute CNC control with 15" touchscreen (automatic calculation of cycle for simple and complex shapes)

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €83,800 Leasing rate: €1,583.82 Bending length: 2,550 mm Max. bending capacity - structural steel: 15 mm Max. sheet thickness without pre-bending at D=5x top roll: 15 mm Max. sheet thickness without pre-bending at D=3x top roll: 13 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 12 mm Max. sheet thickness with pre-bending at D=5x top roll: 12 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 10 mm Top roll diameter: 270 mm Bottom roll diameter: 270 mm Side roll diameter: 230 mm Max. opening: 50 mm Working height: 1,155 mm Motor power: 15 kW Length: 4,760 mm Width: 1,660 mm Height: 1,155 mm Weight: 8,950 kg 4 rolls PLC control Fully hydraulic drive of top and bottom rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable rolling speed Hardened rolls Cone bending device Dodpfxsypbp Do Ad Aoup Hydraulic drop-end bearing Mobile control panel Overload protection Operating manual in GERMAN and ENGLISH Equipment compliant with CE regulations OPTIONS: Upper and side sheet supports NC control system IMPORTANT NOTES FOR CONICAL ROLLING: The max. sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Motor-driven NC rotary table Continuously adjustable rotary table (increment 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Overall height: 660 mm Centering bore: 100 H6 mm Clamping slots: 7 units Slot dimensions: 22 H7 mm Slot spacing: 160 mm Position measurement via rotary encoder ROD 250. Condition: Very good (used) Optional with machine bed (travel = 2000 mm) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service Djdpfjfk R Tdex Ad Ajup - Machine overhauls - Control system modernization

Stanje: dober (rabljeno), NC Rotary Table with Motor Drive Continuously Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Djdpfxofr Ih Dj Ad Ajup Clamping Surface: 1400 mm x 1400 mm Overall Height: 319 mm Clamping Slots: 7 units Slot Size: 22 H7 mm Slot Pitch: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optional with machine base About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernization. Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system upgrades

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Valjarna za pločevino, kapaciteta 3000 mm, H. Vuillot 3000 mm, rabljeni stroj Proizvajalec: H. Vuillot Kapaciteta pločevine: 3000 x 27 mm Premer zgornjega valja: Ø445 mm Premer spodnjih valjev: Ø330 mm Leto izdelave: 1972 Djdpfswcqpnox Ad Aeup

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna masa: 600 kg, premer obdelovanca (maks.): 40 mm, Round Log Profile Milling Machine | Log Cabin Moulder | Tree Trunk Milling Machine For sale is a round log profile milling machine for processing logs. This machine – also known as a round log moulder or tree trunk milling machine – enables the production of round log components for log house construction, landscaping, and creative woodworking projects. Description For sale is a round log profile milling machine designed for processing logs for log house construction and demanding timber structures. Dodpfx Adeyr E Ezj Ajup The machine enables precise machining of round logs in several coordinated processing steps, resulting in accurately fitting components for natural log homes, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removes the bark and prepares the log. - Shaping Uniform rounding and shaping of the log. - Profile and longitudinal milling Milling of profiles and contours along the entire length. - Groove milling Insulation/moon groove for precision log house assembly. - Cutting End milling for notches or joints at 90-degree angles. - Finishing A log is fully machined in approximately 30–40 minutes. Applications - Log home construction - Natural log houses - Round log construction - Timber engineering Advantages - Multiple work steps completed by one machine - Precision machining along the full log length - Ideal for small to medium production volumes - Electric drive units Target Groups - Log home builders - Carpenters - Timber construction companies - Round log specialists Accessories - Spare cutter head - Knife set - Knife grinding machine - Spare parts package Inspection Visit possible by appointment. Further information and technical details available on request. The asking price refers to the complete machine including accessories! Search tags: Round log moulder, tree trunk milling machine, round log machine, round log profile milling machine, blockhouse moulder, log milling machine, round log profile machine, round timber processing machine, log cabin machinery, round log processing machine, palisade milling machine.

Stanje: novo, Vibratory Tumbler for Mass Finishing, various sizes available. New machines! Manufacturer: Eurotec Innovation GmbH Model: RA11 Gross volume: approx. 250 liters Net volume: approx. 175 liters Rated power consumption: approx. 2.5 kW Channel width: 260 mm Connected load: 400V - 16A - 50Hz As a manufacturer of mass finishing plants, dryers, and process water technology, we can supply you with a wide portfolio of systems for deburring, grinding, and polishing. Visit our website to learn more about our products. RA rotary vibrators are particularly suitable for processing bulk materials in high quantities. The gently inclined container floor reliably guides the workpieces onto the built-in screening surface. The large screen area with tangential outlet ensures reliable part separation and optionally offers the possibility to use magnetic separators. Depending on the size of components and batch quantities, RA rotary vibrators are available in various container sizes with volumes from 150 to 1,550 liters. Areas of application: - Mass finishing and polishing of bulk materials in large quantities - Descaling, derusting, deburring, edge rounding - Processing various materials (aluminum, steel, stainless steel, plastic, …) - Fine grinding and polishing of workpieces A corresponding electrical control panel is required to operate the system. Dsdpfx Aehmp Dfed Ajup The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, telephone, messaging portal), in which we will first provide you with a non-binding offer. At the same time, we will inform you of our general terms and conditions and the right of withdrawal, including legal notice, before any purchase/contract is concluded.

Stanje: rabljeno, Okrogli magneti z MK 4 vpenjalom, premer 140 mm in 220 mm Duedpfx Aoyr Nd Ued Asp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 700.160, Ta valjasta sejalna naprava je bila uporabljena za frakcioniranje semen konoplje. Lahko se izdelajo 3 frakcije. Na prodaj so tudi druge naprave. Poglejte spodnji PDF dokument. Dujdpfx Adoxn Hw Aj Aep

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35 kg, delovno območje: 520 mm, nosilnost: 150 kg, Ponujamo ti dve novi dvižni napravi Tiger Hebezeuge BGRS-0150520/270 za okrogle materiale, letnik 2024. Proizvajalec: Tiger Hebezeuge Model: BGRS-0150520/270 Letnik: 2024 Stanje: novo ID kategorije: 666 ID tipa: 1309 Tip: dvižna naprava za okrogle materiale Duedpfx Adox Rzndj Aop Za dodatna vprašanja ali več informacij nam pišite ali nas pokličite.

Stanje: skoraj kot novo (rabljeno), Steinmeyer krogličnovijačni pogon 3526.512/25.40.728.1122 P5P Proizvajalec: August Steinmeyer GmbH & Co. KG Komponenta: krogličnovijačni pogon / kroglična vretena Tip: 3526.512/25.40.728.1122 P5P Razred natančnosti: P5P Izvedba: kroglična vretena z matico Stanje: novo, originalno zapakirano Pakiranje: lesena škatla z zaščitno embalažo Uporaba: natančna linearna gibanja v obdelovalnih strojih, avtomatizacijskih sistemih in CNC sistemih Lokacija: Altenglan Djdpsyr Ab Tofx Ad Aoup

Stanje: rabljeno, Leto izdelave: 2017, Indeksirna vrtljiva miza Proizvajalec: Expert Tünkers Tip: EDX810/0250/8 Leto izdelave: 2017 Miza z 8 postajami (koraki po 45°) 24226 Djdpfx Adsyl Swws Aeup

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 12.979 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 002, doseg roke: 11.000 mm, globina grla: 11.000 mm, skupna širina: 3.000 mm, Oprema: kabina, Ideal machine for timber handling, vehicle regularly serviced, in daily operation until recently - Cummins engine, 118 kW - All-wheel drive and robust ZF axles - Specialized timber handling equipment: 11.0 m reach, 6.3 m boom, 4.6 m curved stick - Load stabilizer to dampen load oscillation during travel - Width 3.00 m, operating weight 27 t - MaxCab comfort cab elevated by 1 m, with air conditioning, joystick steering, sliding door, heated seat, air-suspended comfort seat, full protection grating - Hydraulic system with load-sensing technology, stick damping - Camera systems on right side and rear - Idle speed control and ECO mode - Automatic oscillating axle decoupling - Automatic direction switching via proximity sensor - Upper carriage handrail, detachable - Impact protection on and beneath the undercarriage - Sennebogen control and diagnostic system (SENCON) - Reversible fan for cleaning the radiator Dusdeyric Dspfx Ad Aep - 7 x LED work lights (boom, stick, cab, upper carriage) - MISERA timber grapple ML 92 (0.92 m²) with Indexator continuous rotation head

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 1760x1150x1320 mm Teža 1100 kg Skupna potrebna moč 4,5 kW Duodpsv A Hykjfx Ad Ajp Oscilirajoči čepilni rezkar YRT-115 - Hitrost vrtenja 6000 obr/min - Največja širina čepa 115+2R mm - Največja globina čepa s standardnim orodjem 10 - 45 mm - Največja globina čepa s posebnim orodjem 6 - 90 mm - Kapaciteta 12 kosov/min - Nagib mize: navzgor 0-15° navzdol 0-30° bočno 0-20° - Glavni motor 5 KM - Pomožni motor 1 KM - Dimenzije D=1760, Š=1150, V=1320 mm - Neto teža 1100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Brusa di Garboli TV 65 rezkalni stroj za okrogle palice Dsdjyl Uqmjpfx Ad Aoup Leto izdelave: 1998 Maksimalni premer rezkanja: 65 mm Minimalni premer rezkanja: 15 mm Število rezkalnih glav: 1 Minimalna dolžina obdelovanca: 350 mm Moč glavnega motorja: 5,5 kW Maksimalni podajalni pomik: 18,5 m/min CE oznaka prisotna