Stroj za okroglo krivljenje pločevine - 4 valjiHESSE by DURMA
HRB-4 30360
Stroj za okroglo krivljenje pločevine - 4 valji
HESSE by DURMA
HRB-4 30360
Stalna cena brez DDV
134.000 €
Stanje
Novo
Lokacija
Avstrija 

Prikaži slike
Prikaži karto
Podatki o stroju
- Opis stroja:
- Stroj za okroglo krivljenje pločevine - 4 valji
- Proizvajalec:
- HESSE by DURMA
- Model:
- HRB-4 30360
- Stanje:
- novo
Cena in lokacija
Stalna cena brez DDV
134.000 €
- Lokacija:
- 2351 Wiener Neudorf, Österreich

Klic
Podrobnosti ponudbe
- ID ponudbe:
- A21366192
- Št. reference:
- 1069-310
- Nazadnje posodobljeno:
- dne 03.03.2026
Opis
Condition: New
Delivery time: approx. 12–14 weeks ex works
Country of origin: Turkey
Price: €134,000
Leasing rate: €2,532.60
Bending length: 3,100 mm
Max. bending capacity (mild steel): 25 mm
Max. plate thickness without prebending at D = 5x top roll: 25 mm
Max. plate thickness without prebending at D = 3x top roll: 20 mm
Max. plate thickness without prebending at D = 1.5x top roll: 20 mm
Max. plate thickness with prebending at D = 5x top roll: 20 mm
Max. plate thickness with prebending at D = 1.5x top roll: 16 mm
Top roll diameter: 360 mm
Lower roll diameter: 360 mm
Side roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1,510 mm
Motor power: 22 kW
Length: 5,560 mm
Width: 2,060 mm
Height: 2,050 mm
Weight: 16,750 kg
4 rolls
PLC
Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox
Hydraulic side roll adjustment with electronic synchronization
Hydraulic lower roll adjustment with mechanical synchronization
Adjustable clamping pressure
Variable roll speed
Hardened rolls
Conical bending device
Hydraulic drop-end bearing
Mobile control panel
Overload protection
Operating manual in GERMAN and ENGLISH
Equipment complies with CE regulations
OPTIONS:
Upper and side plate supports
NC control
IMPORTANT NOTES FOR CONICAL BENDING:
Bodpfx Agjypbque Tjcw
The max. plate thickness is 50% of the rated capacity
The cone length must not exceed 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Delivery time: approx. 12–14 weeks ex works
Country of origin: Turkey
Price: €134,000
Leasing rate: €2,532.60
Bending length: 3,100 mm
Max. bending capacity (mild steel): 25 mm
Max. plate thickness without prebending at D = 5x top roll: 25 mm
Max. plate thickness without prebending at D = 3x top roll: 20 mm
Max. plate thickness without prebending at D = 1.5x top roll: 20 mm
Max. plate thickness with prebending at D = 5x top roll: 20 mm
Max. plate thickness with prebending at D = 1.5x top roll: 16 mm
Top roll diameter: 360 mm
Lower roll diameter: 360 mm
Side roll diameter: 270 mm
Max. opening: 60 mm
Working height: 1,510 mm
Motor power: 22 kW
Length: 5,560 mm
Width: 2,060 mm
Height: 2,050 mm
Weight: 16,750 kg
4 rolls
PLC
Fully hydraulic drive for top and lower rolls (from 30 mm bending capacity for all four rolls) via planetary gearbox
Hydraulic side roll adjustment with electronic synchronization
Hydraulic lower roll adjustment with mechanical synchronization
Adjustable clamping pressure
Variable roll speed
Hardened rolls
Conical bending device
Hydraulic drop-end bearing
Mobile control panel
Overload protection
Operating manual in GERMAN and ENGLISH
Equipment complies with CE regulations
OPTIONS:
Upper and side plate supports
NC control
IMPORTANT NOTES FOR CONICAL BENDING:
Bodpfx Agjypbque Tjcw
The max. plate thickness is 50% of the rated capacity
The cone length must not exceed 30% or must be more than 60% of the roll length
Hardened rolls are recommended
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2006
Pošlji zahtevo
Telefon & Faks
+43 2236 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake



