Krivulja Z Valjčki nakup rabljenega (37.613)

Stanje: dober (rabljeno), lastna masa: 2.880 kg, največja dovoljena obremenitev: 10.720 kg, Leto izdelave: 2005, Vehicle Description Tandem Low Loader HUMER TT13.6 First registration: 02/2005 Payload: 10,720 kg Unladen weight: 2,880 kg Interior width: 192 cm Interior length: 550 cm Ramp length: 300 cm Kedpfewravcox Ac Hond - Incl. Austrian registration! - Height-adjustable drawbar - Dual-circuit air brake system (no spring-loaded brake) - Ideal for mini excavator transport :-) - Wooden floor Sale price: €7,700 net Affordable delivery available!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 7 mm Top roller diameter: 200 mm Technical data: - Back roller motorized - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetrical design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes within the transmission - Portable control panel - In compliance with CE standards Options: - Bottom roller driven by electric motor: EURO 2,200 Kodpfx Acsd Ab Ngo Hsnd - Digital display for rear roller position: EURO 1,010 - Extended rollers: EURO 966 - Profile rollers: EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roller diameter: 170 mm Technical Data: - Back roller driven by motor - Cone bending device - Hardened and polished rollers - Entire frame made from St 52 steel - Asymmetric design for perfect bending results - Top and bottom rollers driven by brake electromotors and planetary gearboxes - Portable control desk - In compliance with CE standards Options: - Bottom roller driven by electric motor: EUR 1,650 - Digital display for back roller position: EUR 1,010 - Extended rollers: EUR 966 - Profile rollers: EUR 1,190 We have numerous references! Kodpsd Ab Nqefx Ac Hend

Stanje: novo, Bending length: 1550 mm Sheet thickness: 3.5 mm Upper roll diameter: 110 mm Technical Data: - Rear roll driven by motor - Cone bending device - Entire frame constructed from St 52 steel - Main motor with brake system - Upper and lower rolls driven by electric motor, gearbox, and gear system - Mobile control panel - Cast iron body - Manual movement of rear and lower rolls - Complies with CE standards Knjdpfsd Ab N Dox Ac Hed Options: - Upper roll driven by electric motor EURO 1,166.00 - Digital position display for rear roll EURO 1,010.00 - Hardened rolls EURO 995.00 - Special voltage EURO 480.00 - Material feed table - Lower roll driven by electric motor We have numerous references!

Stanje: novo, Laser power: 6 kW Loading capacity: 1250 kg Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table change time: approx. 15 s Cooling system: water chiller Weight approx.: 17,500 kg Dimensions (LxWxH): 4,400 x 9,500 x 2,350 mm Max. speed: 120 m/min Tube diameter: 220 mm Working area: 2,000 x 6,000 mm The FLC-P Series is a fast, precise, reliable, and cost-effective fiber laser cutting machine for tubes and profiles. It’s a high-efficiency laser cutting machine that meets upper-tier standards and can reach laser power ratings up to 20,000 W, making it a very good choice for thick plate cutting. FLC fiber laser cutters are commonly used in the processing of agricultural machinery, textile machinery, food machinery, construction machinery, elevator manufacturing, and other large machines and plants. You do not need to purchase two separate machines—you can cut both sheet metal and tube profiles with this unit. The compact design saves space. A machine with dual-purpose functionality: capable of cutting both sheet material and metal tubes/profiles. Knodjtwtn Ijpfx Ac Hod Standard tube/profile cutting length is 6 meters, extendable to 9 meters upon request. The tube diameter can be used up to a maximum of 350 mm. The chucks can clamp and self-center automatically at the push of a button. Wireless remote allows for easy blowing, cutting, pausing, calibration simulation, and more. Standard nesting software quickly nests parts for cutting with minimal operator input and includes a flycut function for rapid straight-line cutting. The double exchange table enables continuous cutting without downtime. All of our machines are manufactured to European standards and come with a CE certificate. Our FLC models feature nozzle cleaning and a dual-camera system. Available working areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and active anti-collision, as well as an auto-view function that detects obstacles and moves automatically. Cutting heads are equipped with active cooling. All bridges on our machines are single-piece welded aluminum plate constructions. This design ensures rigidity, prevents deformation under loads or shocks, and allows high speeds and accelerations due to its lower weight (three times lighter than steel bridges). Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Flycutting - Nozzles and lenses (starter kit included) - Parts scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATION VALUE Working area:

Stanje: novo, Laser power: 2Loading capacity: 1250x-Travel (X): 2020mmTravel (Y): 4050mmTravel (Z): 350mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmTable changeover time: approx. 10 secCooling system: water chillerApprox. weight: 11,500 kgDimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system that meets premium-level standards. Capable of supporting laser power up to 30,000 W, it is an excellent choice for cutting thick sheet metal. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and plants. It is an ideal cutting system for those looking to outsource their work. Enables easy blowing, cutting, pausing, calibration simulation, etc., via wireless remote control. Comes standard with nesting software, that quickly and automatically prepares parts for cutting without operator intervention. Also features a flycut cutting function. With a dual exchange table, you can continue cutting without any waiting time. All our machines are manufactured to European standards and feature CE certification. Our FLC machines include automatic nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head offers autofocus, active anti-collision functionality, and auto-view for obstacle detection and automatic movement. Cutting heads are equipped with automatic cooling. All machine bridges are fabricated as one-piece welded aluminium alloy sheet structures. This single-piece design ensures bridge rigidity and prevents deformation during collisions, overlaps, or high loads. In addition, their structure is three times lighter than steel bridges, allowing higher speeds and acceleration with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lenses incl. starter kit - Workpiece debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliant - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY Travel: 2020 x 4050 mm Z-Axis Travel: 350 mm XYZ Axis Guidance: 4-point ball cage XY Axis Drive System: Rack and pinion Z Axis Drive System: Ball screw XY Axis Speed: 100 m/min Z Axis Speed: 30 m/min XY Position Accuracy: 0.05 mm XY Repeatability: 0.03 mm Table Changeover Time: 10 sec Laser Source: Raycus / Hans / JPT Laser Output Power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC Control System: Fscut Laser Cutting Head: Raytools / BOCI / WSX Kjdpfsruwbxjx Ac Hond Support gases: Air / Oxygen / Nitrogen

Stanje: novo, Sheet thickness: 3.3 mm Bending length: 1050 mm Top roll diameter: 90 mm Technical specifications: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roll can be swung out to the side for easy removal of the workpiece - Cone bending device - Rear roll and lower roll are raised and lowered manually via handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll EURO 825 - Digital display for rear roll position EURO 1,010 - Body cover EURO 274 - Hardened rolls EURO 480 We have many references! Knodped Ab T Defx Ac Hod

Stanje: novo, Bending length: 1550 mm Sheet thickness: 1.2 mm Upper roll diameter: 70 mm Technical Data: - Cast iron body - Manual or motorized bending (optional) Ksdpfx Aced Ab T Ij Hjnd - After bending, the upper roll can be opened to the side for easy removal of the material - Cone bending device - Rear and lower rolls can be adjusted up and down manually with handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll - Digital display for rear roll position - Body cover EURO 362,-- - Hardened rolls EURO 550,-- - Variable rotation speed We have numerous references!

Stanje: novo, Dolžina upogibanja: 1050 Debelina pločevine: 1 Premer zgornjega valja: 56 Tehnični podatki: Knsdpfx Aed Ab Uyoc Hjd - Ohišje iz sive litine - Ročno ali motorizirano (opcijsko) upogibanje - Po upogibu se zgornji valj odpre na stran za enostavno odstranitev materiala - Naprava za stožčasto upogibanje - Premikanje zadnjega in spodnjega valja ročno z volanom navzgor in navzdol - Prenosna upravljalna konzola - V skladu s CE standardi Opcije: - Zadnji valj z motorjem - Digitalni prikaz položaja zadnjega valja - Pokrov ohišja - Kaljeni valji EURO 396, -- Imamo veliko referenc!

Stanje: novo, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 Width: 1230 Length: 2480 Weight approx.: 675 kg Kodsfk Ah Njpfx Ac Hsnd The welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, working with electrically powered tools, or working with chemical and oily substances. The tables are equipped with transport rods in the base rails, allowing them to be easily moved using a pallet truck and quickly adjusted in height to match other work surfaces. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, can withstand heavy impacts or blows—such as those that occur frequently when working with heavy hand tools or handling very heavy metal workpieces or tools—without causing permanent deformation or indentations. The metal worktop allows for unrestricted use of magnetic clamps to fix components in place. Thanks to its high dead weight, this universally applicable table offers excellent stability against tipping, even when loaded with heavy items or tools at its highest working position. For accessories and further information, please follow this link:

Stanje: novo, Dimensions (LxWxH): 1480 x 980 x 65 to 105 mm Width: 980 mm Length: 1480 mm Approx. weight: 371 kg Kjdpfxofk Ah Ro Ac Hend Welding and assembly tables of the SMT flex series are robust, height-adjustable, everyday workstations designed for handling heavy workpieces, operating electric tools, or working with chemical or oily substances. The tables can be easily moved using transport rods in the base rails with a pallet truck, and the height can be quickly adjusted to match other work levels. The height adjustment ranges from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, withstands heavy impacts or blows, such as those often occurring when using heavy hand tools or handling very heavy metal workpieces or tools, without causing permanent deformation or notching. The metallic work surface allows unrestricted use of magnetic clamps for fixing components. Due to its high own weight, this universally applicable table provides excellent stability and safety against tipping over, even when supporting heavy items or tools in its highest position. For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 733 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving both efficiency and ergonomics. The height adjustment is provided as standard via manual hydraulics, within a range of 650 – 1050 mm (greater or lower adjustments available upon request). Like the SST fixed series, the worktop also features a 100 x 100 mm grid pattern with Ø 28 mm holes. When used in combination with machining equipment, inspection or rework fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced on site immediately after removal from the machine and then transferred to maintenance for repairs. The fully bolted construction of the clamping plate allows the working surface to be replaced cost-effectively if it becomes worn. Kedpfx Aefk Aifjc Hend Price must be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Working width: 1,500 mm Working length: 3,000 mm Accuracy +/-: 0.05 mm Maximum loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approx. weight: 7,900 kg Laser power: 3 kW Max. material thickness St 37-42: 16 mm Max. for aluminum: approx. 5 mm Max. for stainless steel: approx. 5 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency, upper-class standard laser cutter. Capable of supporting up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for manufacturing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machinery and equipment. This is an ideal cutting machine for those looking to outsource production. It allows easy blowing, cutting, pausing, calibration simulation, etc. via wireless remote control. Standard nesting software quickly prepares parts for cutting without operator intervention and includes a flycut function. Thanks to the dual exchange table, cutting can continue without waiting times. All our machines are manufactured to European standards and come with a CE certificate. FLC series machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and auto-view functions that detect obstacles and move automatically. Cutting heads are equipped with automatic cooling. Ksdpfx Acsrh Rpfs Hjnd The bridges used in all our machines are made of welded aluminum alloy panels in a single-piece construction. This ensures rigidity, prevents deformation from impacts and loads, and maintains shape. Their weight is three times less than comparable steel bridges, resulting in higher speeds and accelerations with less motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touchscreen CNC control - Flycutting capability - Nozzle and lens starter kit - Scrap drawers - Automatic table exchanger - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote enquiry - Automatic lubrication system - Dual camera system Laser type: Closed structure CNC unit: Cyp Cut Autofocus: Yes Working area: 1500 x 3000 mm Repeatable positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Max. speed: 120 m/min Max. acceleration: 1.2 G Max. load capacity (per table): 1,250 kg Laser source: 2,000 W (Han’s resonator) Table changeover time: 15 s Laser cutting head: Raycus, autofocus Power supply: 380 V, 50Hz (three-phase) Supported graphic formats: dwg / dxf / stp Chiller: Available Average machine dimensions: 2,200 x 8,100 x 2,560 mm

Stanje: novo, Laser power: 2 kW Working width: 1500 mm Accuracy +/-: 0.05 mm Max. loading weight: 1,250 kg Dimensions (LxWxH): 11,200 x 3,500 x 2,560 mm Approximate weight: 10,000 kg Max. cutting thickness for aluminum: approx. 4 mm Max. cutting thickness for stainless steel: approx. 5 mm Ksdpjrtwqpefx Ac Hsnd Max. cutting thickness for mild steel: approx. 14 mm The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine built to top-tier standards. Capable of handling laser power up to 30,000 W, it is an excellent choice for cutting thick metal sheets. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and plants. This is an ideal cutting machine for anyone seeking to outsource their cutting needs. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. The standard nesting software ensures parts are prepared for cutting very quickly and without operator intervention. It also features a flycut function for continuous cutting. The double shuttle table design allows you to continue cutting without downtime. All our machines are manufactured to European standards and come with CE certification. Our FLC model machines include nozzle cleaning and a dual camera system. Cutting areas available: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus and an active anti-collision system, as well as an auto-view function that detects obstacles and moves accordingly. Cutting heads are equipped with automatic cooling. All our machines use a bridge made from a single-piece welded aluminum alloy plate construction. This single-piece design ensures bridge rigidity and prevents deformation from impacts, overlaps, or loads. Compared to steel profile bridges, the aluminum bridge is three times lighter, enabling high speeds and acceleration with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly-cutting - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system

Stanje: novo, Laser power: 4 Working area: 1500 x 3000 mm Load capacity: 1200 kg X-axis travel: 1520 mm y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Dimensions (L x W x H): 10,000 x 400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with upper-class standards. With support for laser power up to 30,000 W, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and equipment. This is an ideal cutting machine for everyone looking to outsource cutting operations. The wireless remote control allows simple blowing, cutting, pausing, calibration simulation, and more. Ksdpfxsruwazo Ac Hend The standard nesting software enables parts to be nested for cutting quickly and without operator intervention. Flycut cutting functionality is also included. As a double shuttle table system, operation can continue without downtime between sheets. All our machines are manufactured to European standards and come with CE certification. Our FLC model machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, active anti-collision, and an auto-view function that detects obstacles and moves automatically. Cutting heads are equipped with automatic cooling. The bridges used in all our machines are made from a single-piece welded aluminum alloy plate construction. The one-piece design ensures bridge stiffness and prevents deformation when subject to impacts, overlaps, or loads. In addition, due to their structure being three times lighter than steel profile bridges, high speeds and acceleration are achieved with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic autofocus head - Nesting software - 19" CNC touch control - Fly cutting functionality - Starter kit with nozzles and lenses - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote diagnostics - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area 1500 x 3000 mm Load capacity 1200 kg XY-axis travel 1520 x 3030 mm Z-axis travel 300 mm XYZ-axis guide 4-point ball cage XY-axis drive system Rack and pinion Z-axis drive system Ball screw XY-axis speed 100 m/min Z-axis speed 30 m/min XY positioning accuracy 0.05 mm XY repeatability 0.03 mm Table change time 10 sec Laser source Raycus / Hans / JPT Laser source output 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system Fscut Laser cutting head Raytools / BOCI / WSX Supported gases Air/Oxygen/Nitrogen Cooling type Water cooled Machine weight 12,000 kg Machine di...

Stanje: novo, Laser power: 4Loading capacity: 1250x travel: 2020y travel: 4050z travel: 350Positioning accuracy: 0.05Repeatability: 0.03Table change time: approx. 10Cooling system: Water chillerWeight approx.: 11500Dimensions (LxWxH): 4400 x 10000 x 2120 The FLC series is a fast, sensitive, reliable and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine that meets the standards of the upper price class. It can support laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for manufacturing agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for those looking to outsource cutting operations. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. A standard nesting software program very quickly prepares parts for cutting without any operator intervention. It also features a fly-cutting function. The double automatic changing table allows you to continue cutting without downtime. All our machines are manufactured according to European standards and come with a CE certificate. Our FLC machines are equipped with nozzle cleaning and a dual camera system. Choose from cutting area sizes of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus and an active anti-collision feature, as well as an auto-view function that detects obstacles and automatically moves. Cutting heads are equipped with automatic cooling. The bridge used in all our machines consists of a welded aluminum alloy sheet construction in a single piece. This unibody design ensures the rigidity of the bridge and prevents deformation due to impacts, overlaps, or loads. Furthermore, the lightweight structure—three times lighter than steel profile bridges—enables high speeds and acceleration with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19" touchscreen CNC control - Fly cutting Knjdporuwbijfx Ac Hod - Nozzles and lenses starter kit - Scrap collection drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera SPECIFICATIONS VALUEWorking area 2000 x 4000 mmLoading capacity 1200 kgXY axis travel 2020 x 4050 mmZ axis stroke 350 mmXYZ axis guide 4-point ball cageXY axis drive system Rack and pinionZ axis drive system Ball screwXY axis speed 100 m/minZ axis speed 30 m/minXY positioning accuracy 0.05 mmXY repeatability 0.03 mmTable change time 10 secLaser source Raycus / Hans / JPTLaser source output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC control system FscutLaser cutting head Raytools / BOCI / WSXSupported gases Air/O2/N2

Stanje: novo, Laser power: 12 kW | Loading capacity: 1250 kg | X-axis travel: 2020 mm | Y-axis travel: 4050 mm | Z-axis travel: 350 mm | Positioning accuracy: 0.05 mm | Repeatability: 0.03 mm | Table changeover time: approx. 10 s | Cooling system: Water chiller | Weight: approx. 11,500 kg | Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-efficient fiber laser cutting machine. This high-efficiency machine competes with top-tier models and supports a maximum laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutters are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems. Ideal for businesses seeking to outsource cutting operations. Functions such as blowing, cutting, pausing, calibration simulation, and more are possible via the wireless remote control. Standard nesting software quickly prepares parts for cutting without operator input and includes a flycut function. Thanks to its dual exchange table design, cutting operations can continue seamlessly without waiting time. All our machines are manufactured according to European standards and carry a CE certificate. FLC models are equipped with nozzle cleaning and a dual camera system. Kedpfx Ajruwbqsc Hend Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus and an active anti-collision function, along with an auto-view function that detects obstacles and automatically adjusts its path. Cutting heads feature automatic cooling. The bridges in our machines are made of one-piece, welded aluminum alloy construction. This design ensures rigidity and prevents deformation from shocks, overlaps, or loads. Moreover, these bridges are three times lighter than steel profiles, enabling higher speed and acceleration with reduced motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table exchanger - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS | VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z-axis travel: 350 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z-axis drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut

Stanje: novo, Working area: 2000 x 6000 mm Knedpfx Acsruwb He Hed Loading capacity: 1450 kg X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 2 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system designed to upper-tier standards. With compatibility for laser power up to 30,000 W, it is an excellent choice for cutting thick plates. FLC fiber laser cutting systems are commonly used for processing agricultural machinery, textile machinery, food processing equipment, construction equipment, elevators, and other large machinery and systems. This is an ideal cutting machine for those who wish to outsource their cutting tasks. A wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more. Comes standard with advanced nesting software that optimizes parts nesting for efficient, operator-free cutting. Also features a Flycut mode for continuous cutting of multiple small shapes. The dual shuttle (exchange) table system allows non-stop cutting with zero downtime. All machines are manufactured according to European standards and come with CE certification. Our FLC machines are equipped with automatic nozzle cleaning and a dual camera system. Available cutting tables: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser heads feature autofocus, active anti-collision, and Auto-View function for obstacle detection and automatic repositioning. Cutting heads have automatic cooling. All machines use a single-piece crossbeam made from welded aluminum alloy sheet. The monolithic design ensures maximum rigidity, prevents deformation due to impacts, overlaps, or loading, and provides a lightweight structure (three times lighter than steel bridge profiles) for higher speeds and acceleration at lower motor loads. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic autofocus head - Nesting software - 19-inch touchscreen CNC control - Flycut capability - Nozzles and lens starter kit included - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote diagnostics - Automatic lubrication system - Dual camera system

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg Ksdpfx Aofk Aivsc Hsnd This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!!

Stanje: novo, Sheet thickness: 1.2 mm Bending length: 1550 mm Top roller diameter: 70 mm Technical Data: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roller can be swung out to easily remove the material - Conical bending device - Movement of the rear and lower rollers up and down manually via handwheel - Portable control panel - In compliance with CE standards Options: - Rear roller with motor EURO 825,-- - Digital display for rear roller position EURO 1,010,-- Knjdpfxsd Ab T Ne Ac Hed - Body cover EURO 362,-- - Hardened rollers EURO 550,-- We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 1 mm Upper roller diameter: 56 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the upper roller can be swung out to easily remove the material - Cone bending device - Manual adjustment of rear and lower rollers using handwheels - Portable control panel - In compliance with CE standards Options: - Motorized rear roller - Digital display to indicate the rear roller position - Body cover - Hardened rollers EURO 336, -- We have many references! Knjdpfxed Ab Uxs Ac Hjd

Stanje: novo, Bending length: 1050 mm Sheet thickness: 0.8 mm Top roll diameter: 46 mm Technical data: - Cast iron body Knjdpfod Ab U Ajx Ac Hed - Manual or motorized (optional) bending operation - Top roll can be opened sideways after bending for easy removal of the material - Cone bending device - Rear and lower roll adjustment up and down manually via handwheel - Portable control panel - Complies with CE standards Options: - Motorized rear roll - Digital display to indicate rear roll position - Body cover - Hardened rolls EURO 336, -- We have many references!

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free Ksdpfxehqnl Ts Ac Hond We cut everything All materials formed to shape: - Aluminum - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: novo, Sheet thickness: 2.5 mm Bending length: 1550 mm Top roll diameter: 90 mm Technical data: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be swung out to easily remove the material - Cone bending device - Movement of rear roll and lower roll manually adjustable up and down with handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll EURO 825,-- Knodpfx Aced Ab Txs Hsd - Digital display for rear roll position EURO 1,010,-- - Body cover EURO 362,-- - Hardened rolls EURO 650,-- We have numerous references!

Stanje: novo, Bending length: 1050 mm Sheet thickness: 3.3 mm Top roll diameter: 90 mm Technical specifications: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be opened to the side for easy removal of the material - Cone bending device - Movement of the rear and bottom rolls up and down manually via handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll - Digital display for indicating the position of the rear roll - Body cover EURO 274,-- - Hardened rolls EURO 480,-- - Variable rotation speed Ksdpfx Acsd Ab T Ao Hjnd We have many references!