Krauss Maffei nakup rabljenega (201)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
KraussMaffei
Mali oglas
Almelo
918 km
Linija za brizganje
KraussMaffei110/750 CX
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019,
Mali oglas
Hannover
791 km
Stroj za brizganje
KraussMaffeiKM 80-220 C2
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Here we are offering a well-maintained, continuously serviced injection moulding machine. We also gladly accept well-kept machines from year of manufacture 2005 onwards in part exchange. Please feel free to offer us your surplus machines.
Complete service carried out by the manufacturer up to present.
Injection Moulding Machine:
Manufacturer / Model: Krauss Maffei KM80-220 C2
Serial No.: 61006272
Year of Manufacture: 2004
Control System: MC4
Clamping Unit
Clamping Force: 800 kN / 80 tons
Tie Bar Spacing: 405 x 405 mm
Minimum Mold Installation Height: 250 mm
Maximum Daylight: 750 mm
Mounting Platens (Standard): 610 x 610 mm
Ejector Stroke: 150 mm
Core Pull: 1x
Itjdpfjh Dr E Tex Ah Aor
Injection Unit
Injection Unit / Cylinder Diameter: 20 / Cylinder diameter 30 mm
Max. Shot Weight (ø30): 77g/PS
Injection Volume: 73 cm³/sec
Specific Injection Pressure: 2500 bar
Handling Interface: Euromap 12
Colouring Unit Interface: Yes
Dimensions & Weights
Weight incl. control cabinet: 3.8 t
Length: 3800 mm
Width (machine only): 1050 mm
Height: 1890 mm
Oil fill: 270 L
Location: Hannover / Lower Saxony
The machine is in excellent condition and can be inspected under power. Any peripherals shown in the pictures are NOT included in the offer! The machine is available immediately.
Free loading onto the buyer’s truck, or delivered free to site against reimbursement of freight costs.
Please note the following information about the machines we offer and our company:
- We only sell machines purchased from active production, directly from our warehouse in Hannover
- All machines offered are inspected and tested prior to dismantling
- We DO NOT sell insolvency goods
- We are NOT brokers trading with third-party property
- All machines offered come from successful companies where regular servicing and maintenance are standard practice
- All machines offered are available for inspection at our warehouse
Dražba
Dražba končana
Nordrhein-Westfalen
826 km
Stroj za brizganje
KraussMaffeiKM 650 - 8000 CM
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 6.500 kN, premer vijaka: 130 mm, delovna prostornina: 6.172 cm³, tlak vbrizgavanja: 1,296 letvica, širina plošče: 1.700 mm, višina plošče: 1.704 mm, TECHNICAL DETAILS
Clamping force: 6,500 kN
Max. tool opening force: 346 kN
Force to open moving platen: 169 kN
Force to close moving platen: 144 kN
Clamping platen (h x v): 1,704 x 1,700 mm
Clear width (h x v): 930 x 930 mm
Mould opening stroke: 1,150 mm
Minimum mould installation height: 600 mm
Maximum daylight: 1,750 mm
Ejector stroke: 250 mm
Ejector force forward/backward: 226 kN
Injection Unit
Screw diameter: 130 mm
L/D ratio: 20
Injection pressure: 1,296 bar
Stroke volume: 6,172 ccm
Shot weight (PS): 5,617 g
Injection flow: 1,540 ccm/s
Screw speed: 138 rpm
Plasticising rate: 238 g/s
Nozzle contact force: 246 kN
Electrohydraulic Equipment
Rated output of pump motor: 132 kW
Installed heating capacity: 70 kW
Temperature control zones (barrel): 7
MACHINE DETAILS
Iedex Dbtwopfx Ah Astr
Required floor space approx.: 12.00 x 2.80 x 2.70 m
Total weight: 43,000 kg
EQUIPMENT
- Vibration-damping elements
- 1 x air valve
- 2 x hydraulic core pullers at BFAP
- 2 x hydraulic core pullers at FFAP
- 8 x hot runner control zones
- Robot interface according to Euromap 67

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 80-380 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Brizgalni stroj Krauss Maffei KM 80-380 CX
Leto izdelave: 2010
Enota za zapiranje
Zapiralna sila: 800 kN
Dimenzije vpenjalnih plošč (V × Š): 670 × 670 mm
Prostor med stebri (V × Š): 420 × 420 mm
Višina orodja (min./maks.): 250 mm
Maksimalna odprtina: 750 mm
Vbrizgalna enota
Premer polža: 40 mm
Volumen vbrizga: 201 cm³
Masa vbrizga (PS): 183 g
Itedsxw Upfjpfx Ah Asr
Tlak vbrizga: 1860 bar
Elektro-hidravlična oprema
Moč črpalnega motorja: 15 kW
Moč grelcev: 10,9 kW
Dimenzije in teža
Dimenzije stroja (d × š × v): 4,09 × 1,48 × 2,02 m
Teža (z električno omaro): 3,55 t
Mali oglas
Slovenija
28 km
Stroj za brizganje
KraussMaffeiKM125-700C1
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.250 kN, premer vijaka: 40 mm, delovna prostornina: 217 cm³, tlak vbrizgavanja: 2.377 letvica, hod izmetalca: 150 mm, odmični hod: 600 mm, skupna dolžina: 4.480 mm, skupna širina: 1.510 mm, skupna višina: 2.190 mm, skupna masa: 6.000 kg, moč: 18,5 kW (25,15 KM), Oprema: dokumentacija / priročnik, In perfect shape.
Itedswlhb Tepfx Ah Asr
Mali oglas
Langenfeld (Rheinland)
808 km
Stroj za brizganje
KraussMaffeiKM 250-2000 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 17.745 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.500 kN, premer vijaka: 55 mm, razmak između stupova: 630 mm, delovna prostornina: 570 cm³, izmetalna sila: 58.000 N, hod izmetalca: 200 mm, dolžina plošče: 1.050 mm, širina plošče: 995 mm, skupna dolžina: 2.300 mm, skupna širina: 2.200 mm, skupna višina: 2.300 mm, skupna masa: 14.500 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Lager-Nr.: 503469
Hersteller: KRAUSS MAFFEI
Typ: KM 250-2000 CX
Steuerung: MC5
Baujahr: 2008
Betriebsstunden: 17.745 h
Schließkraft: 2.500 kN
Holmmaße (h x v): 630 x 630 mm
Plattengröße (h x v): 995 x 1.050 mm
Einbauhöhe min.: 330 mm
Plattenabstand max.: 1.170 mm
Öffnungsweg: 820 mm
Schneckendurchmesser: 55 mm
Hubvolumen: 570 ccm
Spritzdruck: 2.387 bar
Maschinenabmessungen (LxBxH): 6,7 m x 2,2 m x 2,3 m
Gesamtgewicht: 14.500 kg
Ausrüstung:
- Bildschirmtext deutsch
- CEE-Steckdose 16A
- Hydraulischer Kernzug 2x
- Maschine inkl. Förderband
- Maschine inkl. Handling
- Maschine inkl. Schutzeinhausung
- Maschine mit Wasserbatterie
- Maschine ohne Materialtrichter
- Maschine ohne Saugfördergerät
- Nivellierelemente
- Schnittstelle EUROMAP 67
Itjdpjxwvdwofx Ah Aer
- Schuko-Steckdose 10A
Technische Daten Handling:
Maschinenart: Linear
Fabrikat: Krauss Maffei
Steuerung: LR 150 - 1577
X-Achse: 900 mm
Y-Achse: 1.400 mm
Z-Achse: 2.000 mm
Gesamtgewicht: 395 kg
Mali oglas
Nemčija
650 km
Dvokomponentni stroj za brizganje
KraussMaffeiKM 350-1000-390CZ Multinject
Klic
Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Na voljo je dvokomponentni brizgalni stroj Krauss Maffei Multinject. Zapiralna sila: 3500kN, dimenzije plošč X/Y: 1280mm/1190mm, drugi agregat: 390CZ. Dimenzije stroja X/Y/Z: pribl. 6300mm/2000mm/3100mm, teža: pribl. 17000kg, krmiljenje: Krauss Maffei MC4, obratovalne ure: 78424h. Krmiljenje je v okvari. Dokumentacija je na voljo. Ogled na lokaciji je možen.
Iodpfx Ajxx Uf Aoh Aetr
Mali oglas
Hannover
791 km
Stroj za brizganje
KraussMaffeiKM 65-160 C2
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Here we offer a very well-maintained, regularly serviced injection moulding machine.
We are also interested in taking back well-kept machines from model year 2010 and newer as part exchange. Please offer us any surplus machines you may have coming available.
Full maintenance by manufacturer up to the present
Injection moulding machine Krauss Maffei KM65-160 C2
Injection moulding machine:
Manufacturer / Type: Krauss Maffei KM65-160 C2
Serial No.: 61007063
Year of manufacture: 2005
Control system: MC4
Full annual servicing carried out by manufacturer
Clamping unit:
Clamping force: 650 kN / 65 tons
Tie bar spacing: 405 x 405 mm
Minimum mould height: 250 mm
Max. platen opening: 750 mm
Standard platen size: 610 x 610 mm
Ejector stroke: 150 mm
Core pull: 1 x unit
Injection unit:
Injection unit size / cylinder diameter: 160 /
Cylinder Ø25 mm and cylinder Ø18 mm
Max. shot weight (Ø25): 47 g/PS
Injection flow rate: 63 cm³/sec
Max. specific injection pressure: 2500 bar
Handling interface: Euromap 12
Dosing unit interface: Yes
Iodpfx Ajh Dp R Ejh Ajtr
Dimensions & Weights:
Weight with control cabinet: 3.8 t
Length: 3,800 mm
Width (machine only): 1,050 mm
Height: 1,890 mm
Oil fill: 270 L
Location: Hanover / Lower Saxony
The machine is in excellent condition and can be inspected under power.
Any peripheral equipment shown in photos is NOT included in the offer!
The machine is available for immediate delivery from our warehouse.
Loaded free onto buyer's truck, or delivered free to address against reimbursement of shipping costs.
About the machines and our company:
- We only sell machines owned by us, acquired from ongoing production, from our Hanover warehouse
- All machines offered are checked and tested prior to removal
- We do NOT sell insolvency goods – we are NOT a broker trading in third-party assets
- All offered machines come from successful companies where regular servicing and maintenance is a matter of course
- All offered machines can be viewed at our warehouse
Mali oglas
Eschweiler
826 km
Stroj za brizganje
KraussMaffeiKM 200 - 1400 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 28.600 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 570 cm³, Clamping force: 2000 kN
Maximum mold opening force: 101 kN
Movable platen opening force: 50 kN
Movable platen closing force: 42 kN
Clamping plate (h x v): 915 x 915 mm
Clearance between tie bars (h x v): 560 x 560 mm
Mold opening stroke: 700 mm
Minimum mold installation height: 550 mm
Maximum opening width: 1250 mm
Ejector stroke: 200 mm
Ejector force fwd/rev: 58/28 kN
Injection unit:
Screw diameter: 55 mm
L/D ratio: 23
Injection pressure: 2387 bar
Shot volume: 570 ccm
Shot weight (PS): 519 g
Injection flow rate: 261 ccm/s
Screw speed: 260 rpm
Plasticizing rate: 49 g/s
Nozzle contact force: 82 kN
Electro-hydraulic equipment:
Rated power of pump motor: 45 kW
Installed heating power: 23 kW
Number of cylinder heating zones: 6
Oil capacity: 525 l
Dimensions and weights:
Space requirement approx.: 6.00 x 2.10 x 2.10 m
Total weight: 11,500 kg
Max. mold weight: 2,535 kg
Accessories:
- Oscillation elements
Additional equipment:
Isdpexz Tq Nofx Ah Aetr
- Electric plasticizing motor
- Accumulator
- 2 x core pull on moving platen
- 1 x core pull on fixed platen
- 2 x air valve
- 8 x hot runner zones
- Robot interface according to Euromap 67
Mali oglas
Nemčija
650 km
Stroj za brizganje
KraussMaffeiCX250-1000
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1 used injection moulding machine with robot
Manufacturer: KRAUSS MAFFEI
Model: CX250-1000
Year of manufacture: 2010
Clamping force: 300 tons
Tie bar spacing: 630 x 630 mm
Minimum mould height: 330 mm
Opening stroke: 820 mm
Screw diameter: 50 mm
Max. shot volume: 432 cm³
Shot weight: 393 g/PS
Control system: MC5
Equipment:
Robot: Krauss Maffei, type: LRX100S
Itodpfxewcb Nrs Ah Aor
2 core pulls on the moving platen
High-wear-resistant injection unit
Mali oglas
Kiskunfélegyháza
379 km
Stroj za brizganje plastike
KraussMaffei200/1400 CX POL
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61029386, vpenjalna sila: 2.000 kN, premer vijaka: 70 mm, Oprema: dokumentacija / priročnik, Stroj za brizganje KraussMaffei 200/1400 CX POL BMC je naprodaj v zelo dobrem stanju. Malo delovnih ur, izdelan leta 2017, uveden v obratovanje leta 2018. Krmiljenje MC6. Za več informacij nas kontaktirajte po e-pošti! Hvala!
Itedpfjwz Iv Asx Ah Aor
Mali oglas
Wartenberg
339 km
Stroj za predelavo poliuretana
KraussMaffei
Klic
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Nosilec za obdelavo poliuretana, zasučni univerzalni nosilec za kalupe, stanje dobro do zelo dobro, vključno s krmiljenjem in hidravlično enoto, vpenjalna površina cca 1250 x 1400 mm, vzporedni hod 200 mm, z dodatno vmesno ploščo (ni vključena v ponudbo), odprtina 897 mm, kot zasuka 40°, mere vxšxd 2410 x 1863 x 3310 mm, zaščita s svetlobnimi zavesami, ogled možen po dogovoru, risba in dodatni tehnični podatki na zahtevo
Iodpfx Aexqmnash Ajtr
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 800-5000 MC
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Vbrizgalni stroj Krauss Maffei KM 800-5000 MC
Leto izdelave: 2001
Oprema: robot
Tehnične podrobnosti
Sila zapiranja: 8.000 kN
Maksimalna sila odpiranja orodja: 356 kN
Sila pomika gibljive plošče (odpiranje): 98 kN
Sila gibljive plošče (zapiranje): 92 kN
Velikost plošč (V x Š): 1.610 x 1.530 mm
Razmak stebrov (V x Š): 1.120 x 1.000 mm
Hod odpiranja orodja: 1.400 mm
Minimalna višina orodja: 600 mm
Maksimalno odpiranje: 2.000 mm
Hod hidravličnega izmetala: 250 mm
Premer polža: 90 mm
Iedjxvb Dyjpfx Ah Ajtr
Razmerje L/D: 23
Vbrizgalni tlak: 1.742 bar
Vbrizgalna prostornina: 2.863 cm³
Vbrizgalna masa (PS): 2.605 g
Podrobnosti stroja
Dimenzije (D x Š x V): 10.500 x 2.860 x 2.890 mm
Teža: 43.000 kg
Mali oglas
Lukovica
17 km
Stroj za brizganje
KraussMaffeiKM 200/1000 C2
Klic
Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 65.000 h, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, Hydraulic core pull 2x
Itodetqifnepfx Ah Aor
Hot Runnere 4x
Air valves
Mali oglas
Eschweiler
826 km
Stroj za brizganje
KraussMaffeiKM 200 - 1000 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, delovna prostornina: 523 cm³, Clamping force: 2000 kN
Max. mold opening force: 101 kN
Clamping platen (H x V): 985 x 915 mm
Clear space (H x V): 630 x 560 mm
Mold opening stroke: 700 mm
Minimum mold installation height: 350 mm
Opening width: 1050 mm
Ejector stroke: 200 mm
Ejector force forward/backward: 58 kN
Injection unit:
Screw diameter: 55 mm
L/D ratio: 20
Injection pressure: 1904 bar
Shot volume: 523 cc
Shot weight (PS): 476 g
Injection flow: 216 cc/s
Screw speed: 280 rpm
Plasticizing rate: 49.7 g/s
Nozzle contact force: 82 kN
Electrohydraulic equipment:
Rated pump motor power: 37 kW
Installed heating capacity: 18 kW
Cylinder heating control zones: 5
Oil capacity: 525 l
Dimensions and weights:
Space requirement approx.: 5.60 x 2.20 x 2.20 m
Overall weight: 11,000 kg
Max. mold weight: 2,535 kg
Accessories:
- Anti-vibration mounts
- Krauss Maffei LRX 150 robot
X: 900 mm
Y: 700/700 mm
Z: 2000 mm
C: 0–90 degrees
Additional equipment:
- Bluepower servodrive
- 1 air valve on stationary mold side (BWAP)
- 1 air valve on moving mold side (FWAP)
- 1 pneumatic needle shut-off nozzle
- 2 core pulls on stationary mold side (BWAP)
- 1 core pull on moving mold side (FWAP)
- 2 x 6-circuit water manifold
Ijdexz Tqvepfx Ah Aetr
Mali oglas
Langenfeld (Rheinland)
808 km
Stroj za brizganje
KraussMaffeiKM 100-380 CX
Klic
Stanje: dober (rabljeno), Leto izdelave: 2007, obratovalne ure: 30.056 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.000 kN, premer vijaka: 40 mm, razmak između stupova: 470 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1,86 letvica, izmetalna sila: 22.000 N, hod izmetalca: 150 mm, dolžina plošče: 770 mm, širina plošče: 745 mm, vgradna višina: 300 mm, skupna dolžina: 4.700 mm, skupna širina: 1.700 mm, skupna višina: 2.250 mm, skupna masa: 7.800 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, prosta razpetina: 900 mm, Oprema: dokumentacija / priročnik, Številka zaloge: 503471
Proizvajalec: KRAUSS MAFFEI
Tip: KM 100-380 CX
Krmiljenje: MC5
Leto izdelave: 2007
Obratovalne ure: 30056 h
Zapiralna sila: 1000 kN
Razdalja med nosilci (V x S): 470 x 470 mm
Velikost plošče (V x S): 745 x 770 mm
Minimalna vgradna višina: 300 mm
Maksimalni razmik plošč: 900 mm
Odpiralna pot: 600 mm
Premer vijačnega polža: 40 mm
Prostornina brizganja: 201 ccm
Brizgalni tlak: 1860 bar
Itodpextcywjfx Ah Aer
Oprema
Prikaz v slovenščini in angleščini
CEE vtičnica 16A
Hidravlično jedro vlečenje 2x
Stroj z zalogovnikom materiala
Stroj z vodnim hladilnikom
Uravnalni elementi
Vmesnik EUROMAP 67
Schuko vtičnica 10A
Dimenzije stroja (D x Š x V): 4,7m x 1,7m x 2,25m
Skupna teža: 7800KG
Mali oglas
Deizisau
509 km
Stroj za brizganje
KraussMaffei300-1900 C2
Klic
Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 254387, vpenjalna sila: 3.000 kN, premer vijaka: 70 mm, razmak između stupova: 630 mm, delovna prostornina: 1.047 cm³, tlak vbrizgavanja: 1.778 letvica, injekcijska masa: 953 g, hod izmetalca: 200 mm, odmični hod: 1.150 mm, širina plošče: 1.050 mm, višina plošče: 995 mm, vgradna višina: 330 mm, skupna dolžina: 6.210 mm, skupna širina: 2.040 mm, skupna višina: 2.380 mm, skupna masa: 12.500 kg, število vbrizgov: 1, Oprema: dokumentacija / priročnik, Vsi artikli se prodajajo kot rabljeni in nepreverjeni, razen če ni navedeno drugače.
Naprodaj je izključno brizgalni stroj, brez rokovalnih naprav ali dodatne opreme.
Prosimo, upoštevajte opis artikla.
Ijdpfjxr Dfrsx Ah Astr
Mali oglas
Hannover
791 km
Brizgalni stroj
KraussMaffeiKM 250-1000 CX m. 2 Robots
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 65.850 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61013689, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, razmak između stupova: 630 mm, delovna prostornina: 432 cm³, tlak vbrizgavanja: 2.304 letvica, injekcijska masa: 393 g, Oprema: dokumentacija / priročnik, Here we, as dealers in injection moulding machines, are pleased to offer the following well-maintained used injection moulding machine for sale. Naturally, we also purchase well-maintained injection moulding machines—currently seeking models from year of manufacture 2010 onward. We have been wholesalers of used injection moulding machines for over 25 years.
Current update – Tax incentive and benefit for used machinery:
From 01.07.2025, used machines can also be eligible for an annual special depreciation of 30% for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as for new equipment.
Keyword: Growth Booster (§ 7 Paragraph 2 EStG-E)
Currently in stock at our Hanover warehouse, tested and ready
Manufacturer: Krauss Maffei
Model: KM 250 1000 CX
Control unit: MC5
Year of manufacture: 2010
Operating hours: 65,850 h
Machine number: 61013689
Processed materials: PE and PP – Thermoplastics
Extras:
2 additional robots: Linear Robots LRX 100 and LRX 50 can also be purchased separately.
- 2 x core pull (movable WAP, fixed WAP)
- Pneumatic valve 1 on FWAP
- Accumulator for enhanced injection performance
- Fast SK decompression CX Midrange
- Ejection of solidified nozzle plug
- Start handling during mould movement
- Start-up circuit
- Cycle time analysis
- External USB keyboard
- Graphic analysis – maintenance instructions
- Electronic coding of injection unit
- Pneumatic valve for BWAP blow-out
- 12 temperature control zones
- Volt-free BDE contact
- Process monitoring
- Cycle storage
Itedpfx Ahsxqhuuo Aor
- Trend chart – target/actual graphic
- PV control
- Active back pressure control
- From first ownership – origin Germany
Regular maintenance by the manufacturer and previous owner
Clamping unit:
Clamping force: 2,500 kN / 250 tons
Tie bar spacing: 630 x 630 mm
Mounting platens: 995 x 1050 mm
Opening stroke: 820 mm
Minimum mould height: 330 mm
Maximum opening stroke: 1,150 mm
Ejector stroke: 200 mm
Ejector force: max. 57 kN / return 26.3 kN
Injection unit:
Screw diameter: 50 mm
Injection volume: 432 ccm
Shot weight: 393 g/PS
Injection pressure: 2,304 bar
Robot LRX S50:
- 3 gripper circuits – 4 vacuum circuits
Robot LRX 100:
- 1 gripper circuit – 4 vacuum circuits
Electrical equipment:
Pump: 45 KW
Heating: 5 zones, 18.7 KW
Weight: 13,900 kg
Dimensions: 5.7 x 2.3 x 2.3 m
Full documentation, manual, and software included.
Available immediately EXW Hanover (Germany) warehouse or delivered carriage paid (subject to freight charge reimbursement).
The machine is offered in fully tested working order and is our sole property. It is available for immediate inspection and demonstration under power at our Hanover warehouse.
For your information on our machines and company:
- We only sell machines that we have purchased from active production for our own stock in Hanover.
- All machines are inspected and tested before dismantling.
- We do NOT sell insolvency assets – we are NOT brokers dealing with third-party property.
- All machines offered come from successful companies where maintenance and care are standard practice.
- All machines can be inspected at our warehouse.
Dražba
Dražba končana
Województwo dolnośląskie
572 km
Stroj za brizganje
KraussMaffeiKM 950-17200 MX
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 9.500 kN, premer vijaka: 120 mm, hod izmetalca: 300 mm, odmični hod: 1.900 mm, TEHNIČNE PODROBNOSTI
Zapiralna sila: 9.500 kN
Odpiralna sila: 665 kN
Razdalja med stebri: 1.400 x 1.150 mm
Montažne plošče: 1.960 x 1.710 mm
Odpiralni hod: 1.900 mm
Minimalna višina orodja: 500 mm
Maksimalna višina orodja: 1.200 mm
Maksimalna odprtina: 2.400 mm
Hod izmetalca: 300 mm
Itsdpfoxup Sijx Ah Asr
Visoko zmogljiv polž HPS-UN, premer: 120 mm
Polmer šobe: 30 mm
Premer odprtine šobe: 12 mm
Premer polža: 120 mm
Teža brizga (HDPE): 5.420 g
Volumen brizga: 7.634 cm³
Specifični vbrizgovalni tlak: 2.257 bar
PODROBNOSTI O STROJU
Dimenzije & Teža
Dimenzije (D x Š x V): 12.770 x 3.420 x 2.750 mm
Teža stroja: 61,5 t
Mali oglas
Eschweiler
826 km
Stroj za brizganje
KraussMaffeiKM 80 - 380 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 22.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, Clamping force 800 kN
Maximum mold opening force 55.3 kN
Iodoxz Tp Eopfx Ah Aetr
Movable platen travel force – opening 31.1 kN
Movable platen travel force – closing 22 kN
Clamping plate (W x H) 670 x 670 mm
Clearance between tie bars (W x H) 420 x 420 mm
Mold opening stroke 500 mm
Minimum mold installation height 250 mm
Maximum opening distance 750 mm
Ejector stroke 150 mm
Ejector force, forward/backward 23 kN
Injection unit:
Screw diameter 40 mm
L/D ratio 20
Injection pressure 1860 bar
Shot volume 201 cm³
Shot weight (PS) 182.9 g
Injection flow 126 cm³/s
Screw speed 295 rpm
Plasticizing rate 26 g/s
Nozzle contact force 50 kN
Electrohydraulic equipment:
Rated pump motor power 15 kW
Installed heating power 11 kW
Number of cylinder heating zones 5
Oil capacity 301 liters
Dimensions and weights:
Required floor space approx. 4.50 x 1.50 x 2.20 m
Total weight 3900 kg
Max. mold weight 995 kg
Accessories:
- Oscillation elements
- 4-circuit water manifold
Additional equipment:
- 1 x air valve
- Accumulator
- Robot interface as per Euromap 67
- 2 x hydraulic core pulls
- 4 x hot runner control zones
- APC
Dražba
Dražba končana
Województwo dolnośląskie
572 km
Stroj za brizganje
KraussMaffeiKM 800-5000 MC
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 90 mm, razmak između stupova: 1.000 mm, tlak vbrizgavanja: 1.742 letvica, odmični hod: 2.000 mm, TEHNIČNE PODROBNOSTI
Zapiralna sila: 8.000 kN
Največja sila odpiranja orodja: 356 kN
Potisna sila gibljive odprte plošče: 98 kN
Sila gibljive zapiralne plošče: 92 kN
Dimenzije plošč (V x Š): 1.610 mm x 1.530 mm
Razmak stebrov (V x Š): 1.120 mm x 1.000 mm
Hod odpiranja orodja: 1.400 mm
Minimalna višina orodja: 600 mm
Maksimalna odprtina: 2.000 mm
Hod hidravličnega izmetalca: 250 mm
Premer polža: 90 mm
L/D razmerje: 23
Vbrizgalni pritisk: 1.742 bar
Vbrizgalni volumen: 2.863 cm³
Teža brizga (PS): 2.605 g
PODROBNOSTI STROJA
Itodpfxsxup Nno Ah Aer
Dimenzije in teža
Dimenzije (D x Š x V): 10.500 x 2.860 x 2.890 mm
Teža: 43.000 kg
Obratovalne ure: 70.000 h
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Eschweiler
826 km
Stroj za brizganje
KraussMaffeiKM 110 - 390 C2
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Stock No.: 13610
Manufacturer: Krauss Maffei
Machine type: KM 110 – 390 C2
Year of manufacture: 1998
Operating hours: h
Control system: MC3-F
Screen language: German
Location: D-52249 Eschweiler
Clamping unit:
Clamping force: 1,100 kN
Max. tool opening force: 70 kN
Moving platen traverse force (open): 35 kN
Moving platen traverse force (close): 28 kN
Clamping platen dimensions (h x v): 745 x 770 mm
Clearance between tie bars (h x v): 470 x 470 mm
Mould opening stroke: 600 mm
Min. mould installation height: 300 mm
Max. daylight: 900 mm
Ejector stroke: 150 mm
Ejector force forward/back: 22 / 10 kN
Injection unit:
Screw diameter: 35 mm
L/D ratio: 23
Injection pressure: 2,429 bar
Stroke volume: 156 cm³
Shot weight (PS): 142 g
Injection flow rate: 123 cm³/s
Screw speed: 391 rpm
Plasticising rate: 22 g/s
Nozzle contact force: 84 kN
Electrohydraulic equipment:
Pump motor power rating: 18.5 kW
Installed heating capacity: 12 kW
Cylinder heating control zones: 5
Oil fill: 345 litres
Dimensions and weights:
Iedsub S Ulspfx Ah Ajtr
Space requirement approx.: 5.00 x 1.60 x 2.20 m
Total weight: 6,000 kg
Max. mould weight: 1,485 kg
Accessories:
- Vibration dampers
- 6-circuit water manifold
Additional equipment:
- 2 x air valves
- 2 x core pullers
- Robot interface as per Euromap 12
- Accumulator
- Electrically driven screw
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 420-2700 C2
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krauss Maffei KM 420-2700 C2 Injection Moulding Machine
Year of manufacture: 2002
Itodpfoxq Akkox Ah Asr
Machine Description
The Krauss Maffei KM 420-2700 C2 injection moulding machine is a robust and precise machine with a high clamping force of 4200 kN, designed for processing thermoplastic materials. Equipped with a reliable hydraulic system and a precise control system, it ensures stable and repeatable operation in demanding production environments.
Technical Specifications
Clamping Unit
Parameter Unit Value
Clamping force kN 4200
Max. mould opening force kN 250
Movable platen traverse force – opening kN 124
Movable platen traverse force – closing kN 102
Platen dimensions (H × L) mm 1270 × 1200
Tie bar clearance (H × L) mm 800 × 800
Mould opening stroke mm 1020
Minimum mould height mm 380
Maximum daylight mm 1400
Ejector force (forward / backward) kN 95 / 48
Max. mould weight kg 6700
Injection Unit
Parameter Unit Value
Screw diameter mm 70
L/D ratio - 20
Injection pressure bar 1829
Shot volume cm³ 1097
Shot weight (PS) g 998
Injection rate cm³/s 513
Max. plasticizing rate g/s 108
Nozzle pressure kN 173
Electrical and Hydraulic Equipment
Parameter Unit Value
Rated pump motor power kW 75
Installed heating power kW 36
Number of heating zones (barrel) - 7
Oil tank capacity l 1075
Dimensions and Weight
Parameter Unit Value
Machine dimensions (L × W × H) m 7.06 × 2.33 × 2.51
Total machine weight kg 20,500
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 110-750 CX
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei KM 110-750 CX Injection Moulding Machine
Year of manufacture: 2007
Machine Description
The Krauss Maffei KM 110-750 CX is a modern injection moulding machine with a fully hydraulic clamping system. It is equipped with an MC5 control system featuring a colour monitor, integrated control panel, and three USB ports.
The machine has a complete plastification unit designed for processing thermoplastics, featuring an abrasive-resistant version. The 45 mm screw is equipped with a non-return valve and an open nozzle.
Isdpfx Ahoxqzz Us Ajtr
Technical Specifications
Clamping Unit
Parameter Unit Value
Clamping force kN 1100
Mould opening force kN 70.0
Moving platen force – opening kN 35.4
Moving platen force – closing kN 31.4
Platen dimensions (h × v) mm 745 × 770
Tie bar spacing (h × v) mm 470 × 470
Mould opening stroke mm 600
Mould installation height mm 300
Platen opening stroke mm 900
Ejector stroke mm 150
Ejector force kN 22.6 / 9.9
Injection Unit
Parameter Unit Value
Screw diameter mm 45
Injection pressure bar 2336
Shot volume cm³ 318
Shot weight (PS) g 289
Screw speed (standard/option) rpm 265 / 355
Electrical-Hydraulic Equipment
Parameter Unit Value
Pump motor nominal power kW 22
Installed heater power kW 15.62
Number of heating zones (cylinder) - 5
Dry cycles according to Euromap 1/h 2000
Oil tank capacity l 489
Dimensions and Weight
Parameter Unit Value
Net weight with control cabinet t 6.2
Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1
Mali oglas
Wrocław
566 km
Stroj za brizganje
KraussMaffeiKM 800-5000 MC
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Brizgalka: Krauss Maffei KM 800-5000 MC
Leto izdelave: 2001
Število delovnih ur: 70.000 h
Konfiguracija: Stroj z robotom, varnostno ograjo in transportnim trakom
Razpoložljivost: Na voljo dve enaki napravi
Sistem zapiranja:
Sila zapiranja: 8.000 kN
Največja sila odpiranja orodja: 356 kN
Sila pomika gibljive odpirajoče plošče: 98 kN
Sila pomika gibljive zapirajoče plošče: 92 kN
Dimenzije plošče orodja (V x Š): 1.610 mm x 1.530 mm
Razdalja med vodili (V x Š): 1.120 mm x 1.000 mm
Hod odpiranja orodja: 1.400 mm
Minimalna višina orodja: 600 mm
Največje odprtje orodja: 2.000 mm
Hod hidravličnega izmetalca: 250 mm
Brizgalna enota:
Isdoxqh I Ispfx Ah Ajtr
Premer polža: 90 mm
Razmerje L/D: 23
Tlak brizganja: 1.742 bar
Prostornina brizganja: 2.863 cm³
Masa brizganja (PS): 2.605 g
Dimenzije in teža:
Dimenzije stroja (D x Š x V): 10,5 x 2,86 x 2,89 m
Teža: 43 ton
Olajšamo vam iskanje: "krauss maffei"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Krauss Maffei (201)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec



































































































































































































