Kovinski Ločilo nakup rabljenega (193)

Leto izdelave: 2010, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, model krmilnika: MTT AutoFab, notranja višina: 250 mm, laserska moč: 400 W, številka stroja/vozila: SLM2501004, vrsta laserja: vlakenski laser, Oprema: odsesavanje prahu, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete, and the laser has been replaced by the manufacturer. However, the printer has limited functionality regarding focus quality at the margins, which is likely due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Output power adjustment: 10 - 105% Long-term output stability: ± 3% Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build chamber height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Amperage: 15 A Laser hours: 0.1 h Dkodpfx Aey H Hxyeplel Pump operating hours: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18–30 °C Air pressure: 6 bar Ambient temperature: 0–45 °C Dimensions & Weight Dimensions (W x D x H): 3 U 19" rack Machine weight: 60 kg EQUIPMENT Powder system PSH 100 Extraction and filter system Chiller unit 5x powder bottles (5 L) 6x substrate plates 10x filter cartridges (H13) 26x slider lips Spare sieves Protective suits Optics cleaning cloths (F-theta) Various small parts & spare components

Leto izdelave: 2022, obratovalne ure: 50 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlet and outlet: ISO-KF40 Dkodpfxjywhvnj Aplsl - Prepared for inertization (sieving

Leto izdelave: 2026, stanje: novo, For separating and sorting by specific weight into light and heavy fractions. Suitable for a range of applications from grain to aluminum/plastic, rubber/textile, and even cable recycling, etc. Type and size can be selected depending on the product and throughput. With approximately the same machine length, available working widths are: 450 mm, 600 mm, and 900 mm. Dsdpfx Ape Snd Nolekl

Stanje: zelo dobro (rabljeno), Separator Lima RM 300 Dkedpey D T N Hjfx Apljl

Stanje: novo, Leto izdelave: 2025, Sheet Metal Decoiler Cantilever 500mm - Load capacity: 1,500 kg - Inner Ø: 480–530 mm Djdpfx Apjfvbxqslskl - Decoiler mandrel with 4 tensioning arms, ball bearing-mounted, with disc brake - Maximum coil width: 500 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, skupna masa: 1.400 kg, vhodna napetost: 400 V, skupna dolžina: 1.270 mm, skupna širina: 1.100 mm, skupna višina: 1.700 mm, Metal Technics Polska Professional CNC Machines, Lasers, and Metalworking Machines We are a manufacturer and importer of high-quality metalworking machinery. We supply proven technologies from Poland, Europe, and Asia, used by hundreds of companies throughout Europe. For over 12 years, we have focused on quality, precision, and reliability. METAL SHAPING MACHINE B5016C – 160 mm STROKE METAL SHAPING MACHINE B5016C A machine designed for machining various internal and external surfaces, particularly suitable for manufacturing keyways. It is widely used in repair shops as well as in toolmaking departments. Technical Data Parameter Specification Maximum ram stroke 160 mm Number of strokes per minute 23 / 32 / 44 / 48 / 67 / 92 Dksdpfxoyuc D Ts Aplsl Worktable diameter 350 mm Vertical adjustment of ram 160 mm Distance from tool holder to column 485 mm Distance from table surface to ram body 320 mm Maximum longitudinal travel of worktable 360 mm Maximum cross travel of worktable 320 mm Maximum rotation angle of worktable 360° Maximum tool dimensions 25 × 40 mm Maximum table load 300 kg Maximum thrust force 4.5 kN T-slot width in worktable 14 mm Main motor power 1.5 kW Dimensions (L × W × H) 1270 × 1100 × 1700 mm Weight 1400 kg Delivery Conditions - Machine brand new - 12 months warranty - Warranty service - Post-warranty service - CE Declaration of Conformity - Operation manual in English - Delivery to customer's location possible. Transport costs are calculated individually by the transport company. If you are interested in more machines, please visit our website.

Stanje: zelo dobro (rabljeno), Separator Lima 500. V kompletu 3 obnovljena sita. Dkedpfx Ajy A Ia Rjplsl

Stanje: zelo dobro (rabljeno), Separator Lima 400 S Dsdpfey A H U Tjx Aplokl Leto izdelave 2008

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 570 mm, izvrtina vretena: 105 mm, premer struženja: 800 mm, premer struženja nad ležiščem sani: 800 mm, stružna dolžina: 3.000 mm, dolžina podajanja os X: 420 mm, hod vretena: 235 mm, skupna dolžina: 4.740 mm, skupna širina: 1.140 mm, skupna višina: 1.910 mm, največja hitrost vretena: 1.600 obr/min, hitrost vretena (min.): 25 obr/min, premer nihanja nad prečnim premičnikom: 570 mm, največji premer metrickega navoja: 120 mm, koraki metričnega navoja: 54, širina postelje: 400 mm, največja hitrost vrtenja: 1.600 obr/min, vrtljajska hitrost (min.): 25 obr/min, vrsta vhodnega toka: trifazni, premer nihanja nad prečno desko: 570 mm, skupna masa: 4.300 kg, premer diska: 450 mm, premer čelne plošče: 450 mm, Metal Technics Polska Professional CNC Machines, Lasers, and Metalworking Equipment We are a manufacturer and importer of high-quality metalworking machines. We provide proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. MTP METAL LATHE 800x3000 7.5 kW SPINDLE BORE 105 Packaging condition: original LATHE CQ6280 800 x 3000 mm The machine is designed for machining workpieces with rotational geometry (shafts, cones, spheres, internal and external threads). It uses turning tools, drills, and threading tools. Thanks to modern solutions, the machine is ideal for professional and industrial applications. Technical data: Max. workpiece length: 3000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing in bed gap: 1035 mm Z1 axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post turning range: 70° X axis travel: 420 mm Spindle speed: (16) 25 – 1600 rpm Spindle bore: 105 mm Spindle nose: D1-8 Spindle taper: MT5 Feed X: (25) 0.022 – 0.74 mm/rev Feed Z: (25) 0.044 – 1.48 mm/rev Quill diameter: 90 mm Quill taper: MT5 Quill stroke: 235 mm Dksdsyz Ubxopfx Apljl Tailstock offset: 11 mm / 0.4" Metric threads: (54) 0.45 – 120 mm Diametral pitch threads: (42) 0.88 – 160 DP Module threads: (46) 0.25 – 60 mm Whitworth threads: (54) 7/16 – 80 TPI Main motor power: 7.5 kW Supply voltage: 400 V Dimensions: 4740 x 1140 x 1910 mm Weight: 4300 kg Equipment: • 3-axis digital readout • 3-jaw chuck Ø 320 mm • 4-jaw chuck Ø 400 mm • Faceplate Ø 450 mm • Drive plate • Splash guard • Coolant system • Fixed steady rest Ø 250 • Follow steady rest • Chuck guard • Reducing sleeves • Centre point • Tools

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Parts Cleaning Machine – Spray Washing System Type L90 Automatic hot water parts washer with basket drive operated by gear motor, stainless steel wash pump (Lowara), circulating 3-sided spray system with stainless steel nozzles. - Basket diameter: 780 mm - Usable height: 500 mm Djdpfx Apsd H Slcslekl - Maximum load weight: 150 kg - Spray pressure: 3 bar (stainless steel pump) - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Washing time clock freely adjustable (minutes and hours) Complete cleaning machine (interior and exterior cladding) made from stainless steel 1.4301 (AISI 304) Water circulation and loading basket made from stainless steel 1.4301 Insulation of the entire system (tank and cabin) made from stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2,000 micron) Intake filter to protect the pump Operating hours counter Steam extraction with condensate return Oil skimmer for bath maintenance The parts washing unit is in near-new condition (test/lab system) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Stanje: rabljeno, Goudsmit separator kovin, rotirajoči magnet Dimenzije: 300mm x 300mm x 300mm Dodpeyykdysfx Apljkl Opremljen z 8 magnetnimi palicami Moč motorja: 0,18 kW, 22 obratov/min

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. Dkjdpfx Apsdubpusljl ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Dkedpfx Aod Evcwjpljl Total power (kW): 6.2 Power consumption (A): 13 Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Leto izdelave: 1968, stanje: dober (rabljeno), for aluminium Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm Dkedpfxj A Dimo Apljl

Leto izdelave: 1968, stanje: dober (rabljeno), for aluminium Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm Dsdpfx Ajgryk Njpljkl

Stanje: rabljeno, Manufacturer: EATON Type: AB 12240 E 36 units available Dkodpfxsd N Sv Ne Aplol New stock

Leto izdelave: 2022, obratovalne ure: 320 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.100 mm, vrsta hlajenja: voda, delovna dolžina: 6.000 mm, številka stroja/vozila: Serien Nr.000025, World first: Meltio has reinvented the 3D laser printing process with this machine. Using welding wire and the corresponding 3D data, this system allows you to manufacture any conceivable components from metallic materials (see photos). We are a specialist welding technology dealer with an application center for laser welding systems. The offered machine is located at this application center. Meltio Engine – 1.2 kW laser power, 976 nm wavelength, multiple 200 W direct diode lasers, power supply 400V with 2-5 kW and active water cooling. For wire diameters from 0.8–1.2 mm. Advanced control module for integrating Meltio technology into existing robotic systems. 390x660x1000 mm – 90 kg. Transform any motion platform into a metal 3D printing system within its respective size constraints. Meltio Engine Dual Wire – Dual-wire welding system for different materials in the welding head. Meltio Engine Hot Wire – Inductive wire preheating. Meltio powder feeder, 2 units with USB connection. Can be used individually. Enables users to precisely and effortlessly calibrate the Meltio multi-laser deposition head before each print. KUKA KR30 with 2100 mm reach, 6-axis robot incl. KRC4 controller and robot operator panel – rated payload: 30 kg. KUKA DKP400 rotary tilt table – load capacity: 400 kg. 3 m linear axis for the robot (can be omitted if not required). Dkjdpfx Apjyk D T Uslol The room must be configured as laser-safe; room partitioning or building works are not included in this offer. No manufacturer’s warranty; the system is handed over fully functional, spare parts supply is ensured. The complete systems are CE certified.

Leto izdelave: 2018, stanje: novo, Permanent overhead magnet separator Type PEM2200 2200 x 1000 x 400 mm ===== Dkodpfx Aed Dy S Dsplel 4x lifting eye bolts for suspension Rubber belt GB30 Magnet dimensions: 1200x500 mm

Leto izdelave: 2018, stanje: dober (rabljeno), Permanent overband magnet separator Type: PEM2000 2000 x 1000 x 400 mm ===== 4x lifting eye bolts for suspension Dedod Dy Szjpfx Apljkl Rubber belt GB30 Magnet dimensions: 1000 x 500 mm

Leto izdelave: 2018, stanje: kot nova (razstavni stroj), številka stroja/vozila: TMA420x280mm, Drum Magnet – Magnetic Separator in Housing incl. Separation Plate, Drive and Gearbox + High-quality stainless steel construction + Separation plate for material separation + Shaft bearing block forming a bearing unit + Pillow block bearing units Dimensions: Dkedpfsdzqxbox Aplel L: 420 mm W: 280 mm H: 380 mm Inlet: 365 x 80 mm Drum: Ø 220 x 400 mm

Leto izdelave: 2018, stanje: kot nova (razstavni stroj), številka stroja/vozila: TMA500x600mm, Drum magnet – magnetic separator in a housing including separating plate, drive unit, and gearbox + High-quality stainless steel construction + Separating plate for precise material separation + Shaft mounting as a bearing unit Dkodpfedzqw Asx Apljl + Pillow block bearing units Dimensions: L: 800 mm W: 800 mm H: 820 mm Inlet: 600 x 250 mm Drum: Ø 500 x 600 mm

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: TMA420x280mm, Drum Magnet – Magnetic Separator in Housing incl. Separation Plate, Drive and Gearbox + High-quality stainless steel construction + Separation plate for material separation + Shaft bearing block forming a bearing unit + Pillow block bearing units Dimensions: L: 420 mm W: 280 mm H: 380 mm Inlet: 365 x 80 mm Dkedpoc Tnh Dofx Aplel Drum: Ø 220 x 400 mm

Stanje: rabljeno, Z-conveyor, conveyor belt with metal link chain GÖSSLING Metal belt conveyor, belt conveyor, stand-alone conveyor Mach. No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Dksdpfx Aswvv Rwopljl Belt width: 400 mm Frame profile height: 70 mm Infeed width: 465 mm Infeed length (lower): approx. 1500 mm Conveyor incline length: approx. 800 mm Discharge (upper) conveyor length: approx. 600 mm Height difference: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Infeed height: approx. 1050 to 1270 mm Drive motor power: approx. 0.37 kW Power supply: 400 V, 50 Hz - Stainless steel metal link chain - Belt drive via NORD geared motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base frame - Mobile on swivel castors Required space (L x W x H): 3160 x 750 x mm Weight: 420 kg Good condition

Leto izdelave: 2026, stanje: novo, For separating and sorting by specific weight into light and heavy fractions. Suitable for a range of applications from grain to aluminum/plastic, rubber/textile, and even cable recycling, etc. Type and size can be selected depending on the product and throughput. With approximately the same machine length, available working widths are: 450 mm, 600 mm, and 900 mm. Dedpjbbr Ipefx Apljkl

Leto izdelave: 2026, stanje: novo, For separating and sorting by specific weight into light and heavy fractions. Suitable for a range of applications from grain to aluminum/plastic, rubber/textile, and even cable recycling, etc. Type and size can be selected depending on the product and throughput. With approximately the same machine length, available working widths are: 450 mm, 600 mm, and 900 mm. Dkodschb Sbjpfx Aplsl