Konzolni Roko nakup rabljenega (2.264)

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), A twin-spindle milling machine (horizontal and vertical) by Rackermann is available. Travel X/Y/Z: 1000mm/370mm/450mm, table dimensions X/Y: 1300mm/400mm. Horizontal: Tool holding fixture: SK40, max. tool diameter: 250mm, milling spindle swivel range: +/-90°, quill stroke: 120mm, spindle diameter: 60mm, speed: 2100 rpm. Vertical: Tool holding fixture: SK40, max. tool diameter: 280mm, spindle diameter: 90mm, speed: 1400 rpm. Feed rate X/Y/Z: 4m/min, feed force X/Y/Z: 10kN/10kN/30kN, rapid traverse X/Y/Z: 5m/min. Machine dimensions X/Y/Z: approx. 5500mm/4100mm/2500mm, weight: approx. 5400kg. Documentation available. An on-site inspection is possible. Itjdsv Hrfmepfx Ah Den

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, nosilnost na konzolno roko: 800 kg, nosilnost na stojalo: 8.000 kg, število vrst polic: 5, višina okvirja: 7.500 mm, dolžina police: 1.200 mm, Oprema: dvostranski, Cantilever Racking OHRA Year of manufacture: 2009 - 5 rows of double-sided racks, 120 columns - Column height: 7,500 mm - Distance between columns: 1,250 mm – 1,600 mm - Arm length: 1,200 mm - Arm load capacity: 800 kg - Column load capacity per side: 4,000 kg - Number of levels: 5 Current capacity: approx. 280 pallet spaces approx. 400 timber packages up to 3 m in length Itjdpfx Aowfm Ursh Den Last inspection: 06/2024 Racking currently installed Dismantling at buyer’s expense Price quoted is net With the racking, we can offer a Combilift C4000 LPG forklift, 7,500 mm lift height, Triplex mast

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Zamikalni izsekavalni stroj Univerzalno uporaben zamikalni izsekavalni stroj, ki se še posebej odlikuje po naslednjih značilnostih: Hitro in enostavno nastavitev rezila Brezstopenjska nastavitev povratnega hoda Stabilna jeklena konstrukcija stojala Uporabniku prijazno razporejeni upravljalni elementi Varen električni dvoročni vklop Števec hodov Tehnične podrobnosti Tip: 1028C Izsekalna sila: 200 kN Širina mize: 1000 mm Itjdpfxjw Rb Ame Ah Dsn Globina mize: 500 mm Velikost zamikalnega nosilca: 550 x 550 mm Hod: 8 - 80 mm Moč motorja: 2,2 kW / 400 V / 50 Hz Potreba po olju (ISO VG 46): cca. 60 l Dimenzije: 1000 x 950 mm Teža: 1140 kg

Leto izdelave: 2021, Stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Itsdpfxjf Tv T Ne Ah Den Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: dober (rabljeno), Renault 270 DCI crane truck, 19 tonnes, Year: 2002, 470,000 km. Engine replaced with factory exchange unit at 250,000 km. Crane capacity: 5.5 tonnes. Technical inspection: passed. No remote control for the crane. Isdpsrhzy Hofx Ah Dotn

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 7 uprights, height 4,230 mm, with base section, usable depth 1,200 mm - 21 cantilever arms, 1,200 mm usable depth, with end stops - 7 roof beams, 1,500 mm projection, pre-drilled for on-site roof installation (*Without timber purlins and trapezoidal sheets for the roof structure) - Including longitudinal and diagonal braces for 1,900 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All components with hot-dip galvanized surface - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm depth, with end stops = 4 storage levels stacked - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Total racking length: 11,500 mm - Including fastening material (excluding floor anchors) - Including assembly instructions and load rating plates C4 according to DIN standards Iedpfx Aoh R Taqeh Dstn - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance delivery notice. Materials are packed appropriately for easy unloading. The subfloor must be concrete, level, suitable for anchor bolts, and capable of bearing the imposed loads. The customer is responsible for checking and ensuring the soil composition, load-bearing capacity, and any required official permits. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety guidelines, it is recommended that the uprights have at least a 500 mm projection above the top storage level.

Leto izdelave: 1976, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 820mm/300mm/485mm, Table dimensions X/Y: 250mm/1000mm, Spindle taper: SK40, Speed: 2800 rpm, Spindle head swivel: +/-45°, Quill stroke: 100mm, Feed rate: 630mm/min, Connected load: 9.5kW, Machine weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Itodpovur Hmsfx Ah Den

Stanje: dober (rabljeno), Cantilever racking OHRA 3 m high Over 100 meters in stock – see photos. Height: 3 m Arm length: 100 cm Load capacity per arm: 800 kg 4.5 linear meters, 4 uprights with arms Negotiable price: €2,160,-- / net The offer includes: 4 uprights with base, each 3 m high 4 adjustable arms per upright, each 100 cm, load capacity 800 kg/arm Diagonal braces, cross bracing, and spacers are included. Frame spacing: 150 cm Load capacity per upright side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m available Other configurations available on request: Constant stock of over 3,000 linear meters of pallet racking from various manufacturers. Transport and assembly available on request. (Subject to changes and errors in technical data, information, and prices as well as prior sale! Please see our terms and conditions; all prices excl. VAT ex stock.) Ijdpfocd Dwyex Ah Djtn Purchase / Sale We are constantly looking for or offering a wide range of products from various sectors - Swept clean site clearances - Company liquidations - Fast, flexible, efficient! We also clear or dispose for insolvency administrators. Send us a few keywords and we will get back to you promptly. To visit our page, please click on our logo!

Stanje: zelo dobro (rabljeno), - Dimenzije: 1050x1300x1500 mm Itodpfxowxvkpe Ah Djn - Kapaciteta moke: 120 kg - Serijska št.: 21650 - Napetost: 400 V

Leto izdelave: 2020, Stanje: novo, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Iodpfx Ajfivhgeh Djtn Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay distance). This example with 4 uprights is simply the most common configuration! A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160/100 - each with 2x3 adjustable arms, 1.20m long, 750kg capacity per arm - with bracing, approx. 1.30m - Uprights double-sided, approx. 3,500mm high, galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1,300mm, standard is 1.30m. - Other standard bay sizes available from stock: 1.00m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m bay length onwards, a small surcharge applies to the listed price! - Custom sizes (other bay distances) are available on request – these also incur a surcharge and have a longer delivery time as they are made to order! - If no alternative bay distance is specified, we will supply the racking with a standard bay distance of 1.30m. - With 4 uprights (3 bays), the rack length is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available on request! Please contact us!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Isdpfxsmhhf Ss Ah Dstn - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: novo, OHRA Cantilever Racking Negotiation Price: €5,940.00 net ex stock You are bidding on a rack with a length of 7.5 m, comprising: - 6 uprights with base, 6 m high - 4 adjustable cantilever arms per upright (120 cm), load capacity 900 kg per arm. Diagonal braces, stiffeners, and spacers are included. Bridges, wire mesh, and chipboard shelves are available separately at an additional cost! Frame spacing: 150 cm Arm length / Cantilever: 120 cm Load capacity: 900 kg / arm Itsdjby Uunjpfx Ah Djn Load capacity per upright per side: 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m, or 4 m also available. Other configurations on request. (Specifications, technical data, and prices are subject to change and availability. Please refer to our General Terms and Conditions. All prices are ex works, excluding VAT.) Purchase / Sale We are constantly seeking and offering a wide range of items from various sectors: - Machines from all industries - Surplus stock - Special lots - Thoroughly swept company clearances - Company liquidations - Purchase of excess stock Fast – flexible – efficient! We also clear out and/or dispose for insolvency administrators. Send us a brief enquiry and we will get back to you immediately.

Leto izdelave: 2021, Stanje: novo, Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex works, loading included! 1 racking unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! You can also build longer or shorter racking units by omitting or purchasing additional frames (or by changing the bay spacing); this example with 4 frames is simply the standard racking solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized IPE 160 / 100 profile with 2x3 adjustable arms of 1.20 m length per upright, 750kg load capacity per arm with bracing approx. 1.30 m Ijdpfjfivhfjx Ah Dotn Double-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, with 3 height-adjustable arms per side Load capacity at load center 600 mm: 750kg per arm / 2,250kg per upright side With horizontal and diagonal bracing, bay spacing e = 1300 mm; standard is 1.30m Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m an additional surcharge applies to the listed price! Special measurements (other bay spacings) are available upon request, incurring a surcharge and longer delivery time as they need to be custom manufactured! If no different bay spacing is specified, we supply the racking with a bay spacing of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipped within Germany directly by Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types etc.) available! Please contact us!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Ijdpfed Tqaljx Ah Dotn Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Leto izdelave: 2021, Stanje: novo, Cantilever racking, single-sided, 6.30m height, 1.20m arms, 500kg per arm – New – : Price ex works incl. loading! 1 racking unit with 4 uprights €4,115 (net)! Transport costs within Germany (excluding islands): €490 (net)! Of course, by omitting or purchasing additional frames, you can configure longer or shorter racking units (also possible by varying the bay spacing); the example with 4 frames is merely the most common rack solution! Itedsfivg Rspfx Ah Djn A hot-dip galvanized cantilever racking system, comprising: Single-sided upright approx. 6,300 mm high, hot-dip galvanized Foot and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with load centre 600 mm: 500 kg per arm / 4,000 kg per upright With 4 uprights per storage level: 4 x 500kg = 2,000 kg Profiles: Uprights: IPE220, Arms: IPE 80 With longitudinal and diagonal bracing, bay spacing = 1,300mm; standard is 1.30m. Other standard bay spacings available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! For bay spacings 1.50m and above, a small surcharge will apply to the stated price! Special sizes (other bay spacings) are also available on request, but incur extra charges and have a longer delivery time as they are custom manufactured! If you do not specify otherwise, we deliver the racking with a bay spacing of 1.30m. In this configuration, an installation with 4 uprights (3 bays) is approx. 4m in length. Delivery includes all bolts and nuts (dispatched within Germany by parcel directly from Würth), but excludes floor anchors. Other configurations (upright height, arm length, arm types, etc.) available! Please contact us!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times Ijdpfefdkb Uex Ah Detn - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level. Itodofdkbhjpfx Ah Djn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Iodemhhyaspfx Ah Dotn - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Ijdpfx Aomhhx Ijh Detn Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level. Itjdpod Tbbdofx Ah Don

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing Itodpfemidyfsx Ah Den - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) Itsdeqt Dmyopfx Ah Dsn - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Isdpfomhhl Hsx Ah Detn Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support Itodpfx Ajmkixweh Djn - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Ijdpfx Ahsh Ek Dao Dotn Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.