Kockerling Allrounder nakup rabljenega (151)

Stanje: generalkompletno obnovljen (rabljeno), Arburg, grelni regulator Thermonic, Arburg Allrounder Iiodpfsyvp Upsx Abxsc 4 kosa regulatorjev v skoraj novem stanju. Skladiščeni kot rezervni deli v vzdrževanju. Cena na kos: 99,-€

Stanje: rabljeno, prevoženi kilometri: 148.766 km, moč: 120 kW (163,15 KM), prva registracija: 08/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 12/2026, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2021, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), klimatska naprava, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, are offering you a well-maintained vehicle for sale. If you are interested in this vehicle, please feel free to contact us by phone or email to arrange a viewing appointment. Please note that the vehicles are not always located directly on our premises. Iisdpfx Ajy Tgdcebxoc Special equipment: 1 DIN slot in front under dashboard on passenger side, exhaust before rear axle on the right, DAB tuner (digital radio reception), suspension: stabilization level II, vehicle without start/stop system, 250 A alternator, front cup holder, folding lid for storage compartment, terminal strip for electrical connections (driver's seat box), fuel filter with water separator, fuel tank with misfuelling protection, radiator grille frame in vehicle color, front engine PTO with bracket for additional coolant compressor, MBUX multimedia system (7" touchscreen), front mud flaps, seat belt system with warning device (passenger side), cab seats: comfort driver seat, additional cut-off relay for battery, reinforced front axle Additional equipment: Overhead storage above windscreen, rear tow hook, adaptive brake lights, driver's side airbag, traction control system (ASR), washer fluid level indicator, electrically adjustable exterior mirrors on both sides, outside temperature display, brake assist, roof lining in driver's cab, automatic driving light activation, electronic brake force distribution (EBD), bodywork/platform: standard flatbed, keyless start, communication module (LTE) for digital services, fuel tank: main tank 71 liters, steering wheel (mechanically adjustable column), headlight range adjustment, truck registration, side marker lights, Mercedes-Benz emergency call system, engine 2.1 l - 120 kW CDI CAT, wheelbase 3665 mm, low emissions according to Euro 6 standard, seat belt system with warning device (driver's side), seat upholstery: fabric, cab seats: adjustable passenger seat, steel wheels, Assyst maintenance interval indicator, heat-insulating glazing, max. permitted gross weight 3.5 t The vehicle is located in our external storage facility, so please contact us to arrange a viewing. Thank you! Price changes, typographical errors, mistakes, and prior sale reserved.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Na voljo je skoraj neuporabljena vsestranska postaja za rokovanje s tiskanimi vezji RG Elektro-Technologie za namen nalaganja. Možne uporabe: pred AOI/po AOI/kombinirano, višinski razpon transporta tiskanih vezij: 930mm-970mm, minimalne dimenzije vezja X/Y: 80mm/50mm, največje dimenzije magazina X/Y/Z: 360mm/360mm/570mm, dimenzije stroja X/Y/Z: cca 1200mm/1700mm/1800mm, teža: cca 250kg, krmiljenje: Siemens S7-1200. Dokumentacija na voljo. Ogled na lokaciji je možen. Slika je simbolična. Iijdpfjy Ndf Njx Abxsc

Stanje: dober (rabljeno), Leto izdelave: 1998, vpenjalna sila: 500 kN, Na prodaj je brizgalni stroj Arburg 320 S 500-150. Stroj je v dobrem stanju. Proizvajalec: ARBURG Model: ALLROUNDER 320 S Iedpfx Aeyxp Eaobxsic Tip / izvedba: 320 S 500 - 150 Strojna številka (serijska številka): 174967 Letnik: 1998 Zapiralna sila: 500 Napetost: 400 V 3∼ Frekvenca: 50 Hz Obratovalne ure: 2250 Tok (neznan): 0,3 A Priključna moč (neznana): 1×15,00 kW Skupna teža (neznana): 21,3 Po želji lahko organiziramo prevoz in nakladanje za doplačilo po vsej Evropi. Cene so brez DDV. Ogled je možen po dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Možna je oddaja v račun ali menjava! Stroji - nakup / prodaja NAKUP IN PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV TER VEČ. Potrebujete visoko kakovosten, a cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali pa želite svoj stroj prodati? Za več informacij ali kontakt nas obiščite na naši spletni strani.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18643 Manufacturer: ARBURG Model: 470 C 1500-400 Golden Edition Year of manufacture: 2008 Clamping Unit Clamping force: 150 t Opening stroke: 500 mm Tie bar spacing (h x v): 470 x 470 mm Min. mold height: 250 mm Daylight opening: 750 mm Injection Unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight (PS): 141 g Injection pressure: 2,500 bar Dimensions & Weight Dimensions (LxWxH): 4.6 x 1.6 x 2.1 m Machine weight: 4,850 kg Additional Information & Extras Iedoxvy Rlepfx Abxeic Core pull: 1 unit Additional Information: Communication card for ProSeS interface available (OPC-UA) Robot interface available (EUROMAP 67) The Golden Edition is a special version of the proven ALLROUNDER C-series, distinguished by optimized hydraulic performance, stable process control, and high reliability. The machine features a clamping force of 150 tons and is ideally suited for the production of technical plastic components as well as for applications with high quality requirements. Typical advantages of this series include: * Robust and durable design * High process stability and repeat accuracy * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition additionally stands out due to its optimized performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is often used in sectors such as automotive supply, technical plastic parts, and series production.

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 2.250 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 174667, vpenjalna sila: 500 kN, skupna masa: 21.300 kg, For sale is an Arburg 320 S 500-150 injection moulding machine. The item is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500 - 150 Machine Number (Serial Number): 174667 Year of Manufacture: 1998 Clamping Force: 500 kN Voltage: 400 V 3∼ Frequency: 50 Hz Operating Hours: 130,746 h Current (unknown): 0.3 A Connected Load/Power (unknown): 1×15.00 kW Total Weight (unknown): 21.3 t Iijdpfxoxvxrze Abxsc Transport and loading can be organised Europe-wide upon request and at an additional charge. Prices exclude VAT. Viewing by appointment is possible. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Machinery buying & selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Stanje: dober (rabljeno), številka stroja/vozila: 181825, vpenjalna sila: 800 kN, For sale is an injection moulding machine from Arburg, model Allrounder 370 S 800-350. The machine is in good condition. Technical data: Arburg Allrounder 370 S 800-350 Injection Moulding Machine - Operating hours: - Machine cycles: 8,011,944 - Pump: 69,544 h - Automatic operation: 59,358 h - Clamping force: 800 kN (≈80 tonnes) - Tie bar distance (H x V): 370 mm x 370 mm, clear space between tie bars - Mounting platens (H x V): 545 mm x 545 mm - Maximum opening stroke: 500 mm (variable) - Minimum mould installation height: min. 250 mm (sometimes min. 200 mm, depending on configuration) Isdpfxext E Tys Abxoic - Maximum platen distance: approx. 650 mm to 750 mm, depending on the minimum mould installation height - Ejector force: typically approx. 35 kN Transport and loading can be organised Europe-wide upon request, at an additional cost. Prices exclude VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet reasonably priced metalworking machine for your production? Or are you looking to sell your machine? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2010, Brizgalni stroj Arburg Allrounder 470 H 1000-170, letnik 2010 Zapiralna sila: 1000 kN Premer polža: 30 mm Dolžina polža: 930 mm Teža brizga: 77 g Iodow E Ev Uepfx Abxjic Z robotom Arburg Stroj si je možno kadar koli ogledati pod napetostjo!

Stanje: generalkompletno obnovljen (rabljeno), Benier Allround cone rounders can be used for a wide range of dough weights and consistencies. The design ensures smooth operation resulting in perfectly round dough balls. Weight range: 100-1200 g Adjustable troughs Iodowgmhnopfx Abxoic Output capacity: 4,500 pieces/hour 2x air blowers Lightweight construction minimizes wear Tracks and cone with improved multi-layer Teflon coating Due to the sealing compound between cone and track, dough damage, fragmentation, and cone wear are reduced The shape of the rounding track enables gentle soft-touch rounding

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A range of injection moulding machines is available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100 t, screw diameter: 30/35 mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100 t, screw diameter: 25 mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200 t, screw diameter: 25/12+15 mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 35 mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30/25 mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100 t, screw diameter: 30 mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60 t, screw diameter: 25 mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80 t, screw diameter: 25 mm, year of manufacture: 2001. 10) 2 x KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale is possible. Some of the machines are partially dismantled and/or defective. Iijdpfewkiicjx Abxec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Some older plastic injection molding machines from Arburg, Demag, and Stübbe are available: 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000 kN, shot weight: 140 g, mold height min./max.: 180 mm / 480 mm, opening stroke: 320 mm, tie bar distance: 360 mm / 355 mm, screw diameter: 40 mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500 kN, shot weight: 207 g, mold height min./max.: 320 mm / 550 mm, opening stroke: 430 mm, tie bar distance: 460 mm / 460 mm, screw diameter: 45 mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000 kN, shot weight: 130 g, mold height min./max.: 200 mm / 400 mm, opening stroke: 350 mm, tie bar distance: 400 mm / 400 mm, screw diameter: 38 mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250 kN, shot weight: 25 g, mold height min./max.: 225 mm / not specified, opening stroke: 325 mm, tie bar distance: 270 mm / 270 mm, screw diameter: 20 mm, core pulls: 1. 5) Arburg 320 850-210, year of manufacture: 1986, clamping force: 850 kN, shot weight: 108 g, mold height min./max.: 250 mm / 625 mm, opening stroke: 375 mm, tie bar distance: 320 mm / 320 mm, screw diameter: 35 mm, core pulls: 0. Iiedox Hz Sbspfx Abxsc An on-site inspection is possible. Sale of individual machines is possible.

Stanje: zelo dobro (rabljeno), Zwick / Roell Model: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Universal Testing Machine 20 kN Tensile & Compression Testing testXpert III Available for sale is a high-quality Zwick / Roell universal testing machine for professional tensile and compression testing of materials and components. This machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The unit is controlled via PC with Zwick/Roell testXpert III software (data carrier & documentation included). Technical data: Rated test force: 20 kN Test directions: Tension & Compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (from documents & nameplate): Mechanics / Testing Rated force: 20 kN Test directions: Tension & Compression Iisdex Up Igopfx Abxsc Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Total height: approx. 1,545–2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical equipment Electrical data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Line frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & control electronics Internal data acquisition: 500 Hz Data transfer to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics enclosure protection: IP32 Important note: "The table shown in the photos is not included in the sale." Status: used Scope of delivery: (see photo) - Zwick / Roell Universal Testing Machine (20 kN) - Electronic unit - PC workstation (monitor, PC - see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Subject to changes and errors in the technical data; information is subject to confirmation!) Further questions can be answered by phone.

Stanje: rabljeno, Clamping angle plate, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box - Table removed from an injection molding machine Isdschdwtopfx Abxeic - Manufacturer: Arburg - Model: Allrounder 320-210-750 kN - Table dimensions: Ø 320 mm - Center bore: Ø mm - Dimensions: 320/320/H163 mm - Weight: 20 kg

Stanje: rabljeno, Clamping angle plate, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Isdpfx Ajchdwrebxoic - Table originates from an injection moulding machine - Manufacturer: Arburg - Model: Allrounder 320-210-750 KN - Table dimensions: 490 x 490 mm - Centre bore: Ø 125 mm - Threaded holes: M12 - Dimensions: 490/490/H400 mm - Weight: 236 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.200 mm, 5-axis machining center in gantry design. CYPORT CP 4030 (Portal Allrounder with 4x3 m machining area). Retrofit machine from 2005 (completely refurbished) Working "Hand in Hand" with you towards a "Retrofit" Iisdpfx Aeivn Euobxjc HIGHLIGHTS • 5-axis simultaneous machining thanks to 2-axis fork milling head with direct drives • Powerful milling spindle with 12,000 rpm • High-rigidity double gantry for optimal machining results • Large work area with minimal footprint • Full access to the work area • Tool magazine with 48 stations Travel X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry clearance Y/Z: 3,280 / 1,400 mm Rapid traverse X/Y/Z: 30/30/30 m/min Feed force per axis: 10,000 N 2-axis NC machining head M 21 (CYTEC): Swivel range A-axis: +/-110° Swivel range C-axis: +/- 360° Powerful CYTEC milling spindle: Tool holder: HSK-A 100 Speed: 18,000 rpm Power: 42/53 kW (100% / 40% duty cycle) Torque: 201/253 Nm (100%/40% duty cycle) Tool magazine: Number of slots: 48 HSK-A100 Max. tool diameter: 105/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Control: HEIDENHAIN iTNC 530 5-axis path control Electronic handwheel wireless HR 410 Coolant system: Tank volume: 800 l External coolant supply: 20 bar Internal coolant supply: 40 bar Paper band filter Coolant-air blast switching (external) Workpiece measuring system: Probe M&H - wireless technology Documentation CE certification RETROFIT SCOPE: NEW COMPONENTS Ball screws NEW All bearings NEW Guide shoes NEW Tool changer NEW Counterbalance cylinders NEW Lubrication distributors NEW All hoses and cables NEW All hoses NEW Bellows NEW PVC slats NEW Safety bumper NEW Electrics (switches, relays, contactors, etc.) NEW Safety glass NEW Paintwork NEW GENERAL OVERHAULED COMPONENTS C-axis A-axis Motor spindle Drive motors Hydraulic unit Hydraulic valves Complete pneumatics * All wear parts within the assemblies are replaced by new components. The condition of the components then meets the qualitative requirements of the Exchange Program. REFURBISHED COMPONENTS Machine table Slide / Z-ram X- and U-carriages Y-carriage Y-beam Energy chains and cable carriers Coolant system Central lubrication Sheet metal cladding All structural components have been inspected, sandblasted, newly ground/scraped, measured, and then repainted. The accuracy of the structural components matches that of new machines. The machine can be viewed at any time. With a commitment to quality down to the smallest detail, EDEL Werkzeugmaschinen GmbH has been manufacturing high-precision machine tools for the complete machining of highly complex workpieces for more than 30 years. Our machines cover a wide range, from machining high-strength materials to aluminum or plastics. The product portfolio extends from 5-axis and 6-axis universal machining centers and 7-axis portal milling machines to gantry machines for workpieces up to 7 meters in length. MADE IN GERMANY

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Layher Stützen 3,00 m gebraucht – Original Allround Stützen für Systemgerüste Diese gebrauchten Layher Stützen mit 3,00 Meter Länge sind Originalteile des Layher Allround Gerüstsystems. Die Stützen bilden die vertikale Basis Ihrer Gerüstkonstruktion und eignen sich für nahezu jedes Bauvorhaben, von Neubau bis Sanierung. Die Stützen sind mit den bekannten Rosetten in festen Abständen ausgestattet, sodass Sie sie schnell und sicher mit Riegeln, Diagonalen oder Konsolen verbinden können. Trotz Gebrauchsspuren befinden sie sich in einem guten technischen Zustand und sind sofort einsatzbereit. 🔧 Spezifikationen Länge: 3,00 Meter Typ: Layher Allround Systemstütze Material: Verzinkter Stahl – witterungsbeständig und langlebig Anschluss: Mit festen Rosetten für schnelle Verbindung Zustand: Gebraucht, technisch geprüft, mit normalen Gebrauchsspuren Iijdpfxsw Nh U Te Abxec Hinweis: Nur für Export

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Layher Auxiliary Ledger 1.40 m Used – Extra Stability for Your Allround Scaffold Are you looking for a used Layher AR auxiliary ledger measuring 1.40 meters for your scaffolding project? This original Layher auxiliary ledger is an indispensable part of the Layher Allround system, providing maximum stability and safety when working at height. With a length of 1.40 meters, this is the ideal size to firmly connect working platforms and reinforce your entire scaffold structure. Key Features Original Layher Allround system component, proven German quality Length: 1.40 m, versatile for various scaffold configurations Made from robust steel, designed for intensive use Used condition, fully technically inspected and ready for immediate use Perfect for construction, maintenance, and renovation works Why choose this auxiliary ledger? Ensures optimal stability and safety for your Layher scaffold A cost-effective alternative to new parts Ijdpfx Abewzxv Tsxoic Large quantities available directly from stock We deliver worldwide, wherever your project is located Delivery & Service These used Layher auxiliary ledgers are available in large quantities and can be shipped quickly to customers worldwide. Collection from our warehouse is of course also possible. Interested in ordering larger lots or combining with other Layher parts such as consoles, ledgers, or standards? Feel free to request a competitive, tailor-made quote.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Layher auxiliary ledger 1.09 m used – extra reinforcement for your Allround scaffold This pre-owned Layher AR auxiliary ledger, measuring 1.09 metres, is an original component of the Layher Allround scaffolding system. The auxiliary ledger is used as a horizontal or diagonal brace, contributing to the stability and safety of the scaffold structure. It is a used item, fully technically inspected and suitable for professional use on construction sites. Key features: - Original Layher Allround system component - Length: 1.09 metres - Material: galvanized steel – strong, durable, and reliable - Condition: used, fully functional - Application: for added stability and reinforcement of work platforms Iiedpfow Db Sijx Abxjc Why choose this auxiliary ledger? - Increases the safety of your Layher scaffold - Cost-effective alternative to new parts - Robust construction suitable for intensive use - Large stock available, suitable for bulk orders - Worldwide delivery available, fast and reliable

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Die Layher AR O-Riegel 1,09 m bildet die horizontale Verbindung zwischen den Stielen eines Layher Allround-Gerüsts. Der Riegel trägt die Belagsteile und sorgt für Stabilität und Festigkeit der Konstruktion. Ijdpfx Aow Ei R Aebxoic Dank des Keilkopfsystems ist die Montage schnell und sicher durchzuführen: Ein Schlag mit dem Hammer, und der Riegel sitzt fest. Die Länge von 1,09 Metern macht diese Ausführung besonders geeignet für schmale Fassaden, Treppentürme und Renovierungsgerüste, bei denen längere Riegel nicht passen. Diese gebrauchten Riegel wurden technisch geprüft und sind noch voll einsatzfähig. Sie können leichte Gebrauchsspuren oder Verfärbungen aufweisen, sind aber ansonsten in gutem Zustand – eine nachhaltige und kostengünstige Wahl für Profis und Verleihfirmen. Einsatzbereiche - Renovierungs- und Fassadengerüste - Innengerüste oder Treppentürme - Gerüstkonstruktionen bei wenig Platz - Kombination mit Layher Allround-Stielen und Belagsteilen

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Layher Allround U-Console with pin 0.39 m – used This used Layher AR U-Console with pin (length 0.39 meters) is specifically designed to create additional working width for your Layher Allround scaffolding system. Ideal for extending work platforms towards facades or for maintenance and renovation work where extra space is required. ✅ Features: Length: 0.39 meters Design: steel (lightweight LW version), robust and durable Original Layher Allround system component Quick and safe assembly without special tools Used condition: fully functional, with normal signs of use ✅ Advantages: A cost-effective alternative to new. Available immediately from stock, also in larger quantities. Reliable Layher system material, known worldwide for its quality. 👉 Availability & delivery: Large quantities in stock. Worldwide delivery possible. Collection is also possible. Separate quotations available for large orders. Isdpfx Abewzxcmoxsic

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Various used Layher base jacks – adjustable base plates for modular scaffolding systems Looking for used base jacks for system scaffolding? We offer a wide range of original Layher Allround base jacks, including both fixed and swivel models, in multiple lengths such as 0.48 m and 0.60 m. These steel jacks provide a stable, height-adjustable foundation for your scaffolding structure – even on uneven surfaces. Suitable for professional use in construction, industry, and renovation projects. Example of available variants • Layher AR base jack 0.60 m – fixed model For standard Allround scaffolding, coarse thread for quick adjustment • Layher base jack 0.60 m – coarse thread (non-branded) Compatible with various systems, extra robust • Layher AR base jack 0.48 m – fixed model Compact design, ideal for restricted assembly heights • Swivel base jacks – used Flexible use on slopes or uneven ground (available on request) Advantages of used base jacks • Fully functional, professionally inspected • Made of galvanized steel, suitable for intensive use • Perfect for height adjustment and levelling • Coarse thread for quick, precise setting • Excellent price-performance ratio compared to new equipment _____ International trade via BuildingEquipment.eu Our used base jacks are suitable not only for Dutch customers, but are also delivered worldwide by us. Unique features: • Global delivery: by pallet, container or freight forwarder • Complete export documentation & bulk offers available • Can be combined with scaffold frames, consoles, ledgers, and more Iiedpew Ddavjfx Abxec

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Professional Layher AR O‑ledgers (2.57 m) – Large stock, immediately available For sale: batch of original Layher AR O‑ledgers, 2.57 meters long, used but technically in excellent condition. Ideal for stability and load transfer in Layher Allround scaffolding systems. Featuring a robust galvanized construction and fast assembly via rosette connectors. Proven quality: part of a system with certified load-bearing capacity – maximum approx. 2.7 kN point load and 2.65 kN/m uniform load with LW version Suitable for heavy-duty applications: optimal rigidity and stability, even with longer spans Product details: Isdpfjw Niuzjx Abxoic Type: Layher AR O‑ledger – used Length: 2.57 meters Material: Hot-dip galvanized steel, suitable for intensive use Mounting system: Seamlessly fits Layher Allround with rosette heads Condition: Technically inspected and ready for immediate use Stock: 644 pieces available in Andelst (NL) Why choose these O‑ledgers? Originality & reliability: Genuine Layher components, guaranteed compatibility In stock, fast delivery: Suitable for both small and large projects Top quality at competitive prices: An excellent alternative to new material Flexible quantities: Purchase per piece or in bulk, possible mix of other lengths Safe & expert transport: Pickup or delivery by arrangement – forklift service available on collection Interested? Send a message if you: would like to know prices per length or in bulk require additional photos or technical information

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Layher Ledger 1.40 m Used – Strong Horizontal Connection for System Scaffolding This used Layher ledger of 1.40 meters is an essential component of the Layher Allround scaffolding system. The ledger provides a solid horizontal connection between vertical standards and thus contributes to the stability, strength, and safety of the entire scaffold structure. The ledger is made of galvanized steel and is suitable for repeated professional use in construction, renovation, and industrial projects. 🔧 Technical Specifications Brand: Layher Type: Allround system Length: 1.40 meter Isdpfx Aow H Sbgebxeic Material: Galvanized steel – weather-resistant and durable Condition: Used, technically inspected, and fully functional ✅ Why choose this used ledger? Original Layher quality at a competitive price Immediately deployable, suitable for intensive use Provides stable horizontal connections Fully compatible with Layher Allround components Available from large stock Application This ledger is used in Layher Allround scaffolding systems to create sturdy horizontal connections between vertical standards. Essential for maintaining structure, alignment, and uniform load distribution, especially in multi-level scaffolds.

Stanje: dober (rabljeno), Layher Allround Standard with spigot 1.00 m used ring 50 Saves assembly time thanks to the ring system and dimensional accuracy of the components. Robust and reliable: Made from high-grade steel for maximum stability. Highly versatile: Suitable for tall scaffold constructions and various applications. Durable design: Withstands intensive use and heavy loads. Isdpfx Aew Ei Riebxeic Guaranteed safety: Meets the strictest safety standards. The Allround system for all scaffolding applications!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Looking for a reliable and robust O-ledger for your scaffolding construction? This used Layher AR O-ledger with a length of 0.73 meters is a compact and sturdy connecting ledger, ideal for bridging short spans within your Layher Allround system. ✔ Original Layher Allround Ijdpfx Abow Ei Saoxeic ✔ Length: 0.73 meters ✔ Material: Galvanised steel – durable and weather-resistant ✔ Condition: Used, but in good working order ✔ Perfect for renovation projects, maintenance, or as an addition to existing scaffolding This O-ledger is easy to assemble thanks to Layher’s intelligent coupling system. Despite previous use, it is technically sound and ready for immediate use on the construction site. Note: Used equipment may show signs of wear, but is always inspected for safety and quality. The photo is for illustrative purposes only.