Kabina Za Barvanje Mobilne nakup rabljenega (98.918)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, Goods width: 2400 mm Roller width: 2600 mm Number of rollers: 2 x S-roller units S-roller - diameter: 220 mm Roller covering: soft rubber, 75 Shore A Line pressure: 40 N/mm Total pressure: 10 tonnes Lredotv Iukspfx Al Rjt Liquor tank with guide roller and displacer Liquor capacity: approx. 25 litres Fabric guide for knitted goods: 2 profile width holders Drive for 60 m/min Dyeing foulard with 2 "floating rollers" with small tank, guide roller and displacer body for KKV dyeing processes, fabric guide for knitted goods, Machine will be completely overhauled before delivery, supplied with warranty, with drive, adaptable to installation requirements. Can be expanded to a complete KKV station.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2023, Working width: 1800 mm Lsdpfx Alst Ev U So Rert Roller width: 2000 mm Number of rollers: 2 x S-rollers S-roller diameter: 220 mm Roller covering: soft rubber, 75 Shore A Line pressure: 50 N/mm Total pressure: 10 tons Liquor trough with under-liquor squeezing unit, 4 rollers Liquor capacity: approx. 48 liters Fabric guide for woven fabric, built-in width holder before nip Drive: without drive, m/min Drive: without drive (can be supplied with customized frequency inverter) Dyeing padder with 2 "floating rollers" with large trough and under-liquor squeezing unit for continuous dyeing (KKV processes). The machine will be completely overhauled before delivery and supplied with warranty. Drive not included—customized frequency-controlled drive available on request.

Stanje: rabljeno, Leto izdelave: 2021, Material width: 5400 mm Roll width: 5600 mm Number of rollers: 2 x S-roller units S-roller diameter: 350 mm Roller covering: Soft rubber, 75 Shore A Line pressure: 35 N/mm Total pressure: 20 tons Lredpfxou Su A Ne Al Rjt Dye liquor tank with guide roller Tank capacity: approx. 150 liters Fabric guiding for woven goods: curved spreader at front Hydraulic control panel for separate pressure adjustment Drive journal without drive Dye padder with 2 horizontally arranged "floating rollers", with liquor tank, guide roller and displacement device (photo shows a similar machine in delivery condition) New drive system to be designed according to application, costs approx. €15,000. Warranty: 12 months

Stanje: rabljeno, Leto izdelave: 1980, Working width: 5200 mm Roll width: 5400 mm Number of rollers: 2 x S-rollers S-roller diameter: 350 mm Roll covering: soft rubber, 75 Shore A Line pressure: 40 N/mm Total pressure: 21 tons Tank capacity: approx. 20 liters Fabric guide for woven fabric: guide roller in front of nip Drive spindles: without drive Weight: 13 t Dimensions: 7 x 2 x 2.7 m Dyeing foulard with 2 “floating rollers” arranged horizontally Designed for dyeing triangular gussets Lrjdpfetv Igyex Al Ret Drip tray located below the S-rollers The machine will be completely overhauled before delivery. We deliver with warranty. Hydraulics present, drive and control unit need to be added.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.258 mm, skupna višina: 2.790 mm, skupna širina: 2.370 mm, trajanje garancije: 24 meseci, vhodna napetost: 380 V, Oprema: osvetlitev, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customised shipping quote. ✅ Made to order ✅ Brand-new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorised European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks from receipt of payment Please also enquire about the current stock availability. ⭐ Matech Powder Coating Booth – MATBOOTH.FT.3-L MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT.3-L is a professional powder coating booth designed for manual powder coating applications on small and medium-sized workpieces. The L-version features an extended base frame, offering improved working comfort and advantages when handling wider workpieces. With three polyester filters, powerful extraction performance, and an automatic filter cleaning system, this booth provides a clean, practical, and economical solution for powder coating operations. ☘️ Efficient ☘️ Clean application ☘️ Professional results ✅ L-version with extended base frame ✅ Ideal for wider workpieces ✅ Compact solution for professional powder coating ✅ High-performance extraction system ✅ Automatic filter cleaning system ✅ Cost-efficient powder recovery ✅ Customisable with a range of additional options ➖➖➖➖➖ Technical Specifications: ✔️ 3 polyester filters ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning cycle ✔️ Powder recovery container: 30 L ✔️ 1 x 3 kW extraction fan ✔️ Extraction airflow: 3500 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust ducting required – with Nano Filter Box! ✨ With the optional Nano Filter Box, your powder coating booth can be operated without connection to an exhaust stack or fixed ducting. This provides maximum flexibility, making it ideal for workshops where a direct exhaust system is not available. Additionally, the booths can be customised and adapted with various options to suit your specific operational requirements. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer a range of financing models to help you plan your investment flexibly. Please contact us for information regarding leasing, hire purchase, or instalment payment options. ➖➖➖➖➖ ✨ Purchase directly from the official European distributor and benefit from superior service and quality! ✨ Proton Maschinenbau provides professional Matech surface technology for industrial applications. Our machines are manufactured to order and supplied as new, unused equipment with a 2-year warranty. Custom dimensions or individual configurations are available on request. We are happy to plan a tailored solution for your workshop. Lodpfx Aogf A Shsl Rjrt Contact us now – get your business ready for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) ✈️Item in stock and now available Ljdoc Utdrjpfx Al Rert ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✅✅✅Energy Efficiency Class A+++✅✅✅ (Shipping costs on request) *Sales outside the EU only ✳️Safeguard your liquidity! We offer a variety of financing solutions to maximize the success of your investment. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Take advantage of Proton’s 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ✨Effortlessly sprays all powder types, coats complex geometries with outstanding efficiency and quality, and performs reliably even in the most challenging environments. This spray gun set features a reinforced, more stable design. ✨Works with any powder: Today’s challenge is spraying a wide variety of colors and chemicals. PROTON CLASSIC delivers the power and control required to achieve the perfect finish with any powder. ✨Optimal ergonomics: This lightweight, ergonomically designed gun offers better balance and handling, letting you position it comfortably for improved coverage and quicker coating. ✨No matter the conditions: Wherever you operate, the new PROTON CLASSIC delivers perfect coating. Whether in heat or cold, PROTON CLASSIC ensures excellent performance and reliability, dry or humid, in any coating environment. ✨Built to last... Industrial-strength gun design from a single mold, die-cast pump, and a steel-framed cart ensure unmatched toughness and durability, built to withstand any coating environment. All equipment is new, never used. Do you need a custom configuration❗ Call us now❗ ✅WE OFFER CUSTOM SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, MANUFACTURE, AND INSTALL SPECIFICALLY FOR YOU.✅ ☀️ 2-YEAR WARRANTY ☀️ As this website requires information to be submitted primarily in German, this content has been provided in German as the main language. In every country, the text is shown in its respective national language. This product is sold only outside of Europe.

Stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 12 reviews ✈️ Shipping: 3-4 weeks ✈️ ⭐PLUS VAT & SHIPPING⭐ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✅✅✅Energy Class A+++✅✅✅ ⭐Offer Price €6,220 PLUS VAT & SHIPPING⭐ ►►Buy Now◄◄ ✳️Preserve your liquidity! We offer you a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST Delivery Time: 3-4 Weeks❗⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ ➖➖➖➖➖ ☘️Eco-friendly☘️⚡️Green Energy⚡️☘️ ✨Powerful ✨ Economical ✨ Efficient ❗❗❗Shortest Lead-Time! Buy Direct from the Manufacturer❗❗❗ ►►►PROTON - WETLINE EX - Spray Booth - EXTRACTION CHAMBERS◄◄◄ ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER: 0.55 KW/H ✔️ FAN CAPACITY: 8,000 M³/H ✔️ CARDBOARD FILTER AREA: 2.6 m² ✔️ FIBERGLASS FILTER AREA: 1.44 m² ✔️ PANEL FILTERS G3: 2 PCS ✔️ PANEL FILTER SURFACE: 1.7 m² ✔️ MANOMETER: YES ✔️ MOTOR CONNECTION: BELT DRIVE ✳️LOW-COST BOOTH SOLUTION✳️ Exhaust/Supply chambers are ideal for converting an area of your factory into a spray painting zone. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We offer a range of exhaust/supply chambers designed to meet your surface finishing requirements while minimising your floor space usage. Our exhaust/supply chambers feature the same construction characteristics as our large industrial booths. ✳️ENVIRONMENTALLY FRIENDLY✳️ Each supply chamber meets safety and code requirements — NFPA-33, IFC — to protect both workers in industrial spray environments and those outside. Your extraction/supply chamber is engineered to efficiently remove overspray from the painting process while maintaining a consistent airflow throughout the workspace. ✳️FLEXIBLE & ADAPTABLE✳️ You’ll find our chambers can be designed for both supply modes. Supply chambers are delivered as a package with exhaust fan and motor, while dedicated supply chambers are specifically engineered to accommodate air make-up units. ✳️CNC & CAD TECHNOLOGY✳️ Panels are made from premium 1.5–2.0 mm G-90 galvanized steel, precisely punched at M5 centers for easy nut and bolt assembly, and reinforced to support fan mounting. ✳️QUIET EXHAUST FANS✳️ Typically operate at low dBa sound levels below OSHA limits. ⭐Follow us for new promotions⭐ Ljdpfx Aoc Uthxel Rsrt ☀️2-YEAR WARRANTY☀️ ☀️We provide CE certificates for all our machines and ATEX certification for those requiring it.☀️

Stanje: novo, These units are made of galvanized sheet metal and are designed for complete bolt assembly. This takes up very little space during shipping. The extraction system is developed separately and specifically for each booth, ensuring optimal extraction performance. Thanks to the extraction, personnel applying wet paint are not affected or disturbed by paint fumes. In Elboy Wetline-KF wet paint booths, environmental pollution is prevented by using a combination of accordion, cartridge, or roll glass fiber filtration systems. Wet paint particles extracted from the air by the suction fan are captured by the accordion filter located at the rear of the booth. Ljdjdy Dv Depfx Al Rsrt Any residual wet paint particles not retained by the accordion filter are captured by the fiber filter at the rear. The door system can be mounted in various ways at the front entrance. UV lamps can be installed in the cabinet to inspect the painting process.

Leto izdelave: 2020, stanje: novo, Touch-Auslösung löschen Die ROMER-Kabinen sind mit 4-Zoll-Farb-Touch-Bedienfeldern ausgestattet. Die Kabinensteuerung ist intuitiv und in drei Modi verfügbar: automatisch (temporär), automatisch (über einen Plug-in-Filteradapter) oder manuell. Filterstecker-Sensor Die Kabinen sind mit einem Sensor ausgestattet, der den Anwender informiert, sobald die Filter wegen Verstopfung gereinigt werden müssen. Das System meldet ebenfalls, wenn die Filter bereits im Einsatz sind. Automatische Filterreinigung Das elektronische System zur automatischen Filterreinigung steuert sowohl die Reinigungsintervalle als auch den optimalen Reinigungszeitpunkt. Jeder Filter wird individuell gereinigt; die Filter können bei Bedarf auch manuell mit einer Druckluftpistole gereinigt werden. Aus Erfahrung wissen wir, dass es schwierig ist, den Bediener regelmäßig zur Filterreinigung aufzufordern. Dank des automatischen Systems muss der Bediener hier nicht eingreifen oder die Produktion unterbrechen. Niedriges Geräuschniveau Die Aluminiumlüfter arbeiten sehr leise mit einer Lautstärke von 74–79 dB – das reicht nicht aus, um zu stören. Selbst bei der Standard-Kabinenkonstruktion ist es schwierig, sich innerhalb der Kabine zu unterhalten. Durchgehende Kabinen ("overhung squirrel cage") Die Kabine mit überhängenden Lüfterkäfigen trägt zur Produktivitätssteigerung bei, da die Lackierer sie nicht mehr manuell bewegen müssen. Vorratsfertiger Aufbau ist möglich. Explosionsschutz Die übrigen Kabinenkonstruktionen verhindern, dass sich während des Lackierprozesses explosionsfähige Gemische bilden. Jede Baugruppe wurde sorgfältig ausgewählt, um dieses Risiko wirksam zu minimieren. Lrodpfx Asfzciqel Ret

Leto izdelave: 2026, stanje: novo, ROMER cabins are equipped with 4" color touchscreens. The cabin operation is intuitive and can be set in 3 modes: automatic (timer-based), automatic (based on a clogged filter sensor), or manual. Automatic Filter Cleaning The electronic system for automatic filter cleaning allows you to set both the cleaning frequency and the ignition timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the push of a button. We know from experience that it is difficult for operators to ensure filter maintenance. With this intelligent system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74–79 dB – that's not much. Even with a standard cabin configuration, it is difficult to hold a conversation. Lrsdjfzkzhjpfx Al Ret Browse through the cabin By pulling the lifter beams within the cabin, work efficiency is increased and the painter is relieved of the need to move them manually.

Leto izdelave: 2020, stanje: novo, ROMER® is the largest manufacturer of powder coating equipment in Poland and one of the largest in Europe. ROMER® has produced over 10,000 units, which are in use in more than 45 countries worldwide. ROMER® manufactures individual technological components for powder coatings as well as complete, fully automated turnkey paint shops. ROMER® provides heating solutions for the aerospace and automotive industries, supplying some of the world’s largest companies. We offer warranty and post-warranty service for the equipment we sell, along with a full range of spare parts. Lodpfx Aljfzq Ryo Rert

Leto izdelave: 2020, stanje: novo, ROMER® je največji proizvajalec praškastih barv na Poljskem in eden največjih v Evropi. ROMER® je več kot 10.000 proizvedenih naprav, ki delujejo v več kot 45 državah po vsem svetu. ROMER® proizvaja posamezno tehnološko opremo za lakirnice in popolne popolnoma avtomatske lakirnice. Lsdpfxsfz U Tij Al Rsrt ROMER® ponuja rešitve za ogrevanje za letalsko in avtomobilsko industrijo za največja vprašanja na svetu. Zagotavljamo garancijski in po garancijski servis naprav, ki jih prodajamo, s celotno paleto rezervnih delov.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning Lodpjfzktzsfx Al Rert The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. Ljdpfxjfz A Ile Al Rert We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. Lrsdpfxefz A Iwj Al Ret We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Lodpsfz I Ehefx Al Rjrt Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: novo, Leto izdelave: 2020, 🏭 BARVNA KOMORA ZA PRAŠNO BARVANJE KPO-3 Samodejno čiščenje filtrov z nastavljivim pulznim časom ter ročnim načinom. 🧼⏱️🖲️ 100 % poliester filtri – pralni, vodoodporni in dolgotrajni. 🧵💧♻️ ROMER JET™ čiščenje filtrov – patentiran hitri zračni pulz za močno čiščenje. 💥💨🏅 Nizkohrupni aluminijasti ventilatorji (74–79 dB) – varno, isker zmanjšano delovanje z nizko porabo energije. 🔇⚡🛡️ Nastavljiva zračna zapora – antistatična plošča ščiti filtre in izboljšuje odsesavanje. 🌬️🛡️📈 Tesna namestitev filtrov – tesnilo in objemka za močno tesnjenje ter enostavno vzdrževanje. 🔩🧷✅ Upravljanje na dotik – samodejno (čas), samodejno (senzor zamašitve), ročni način + opozorila za menjavo filtrov. 📲🔁⚠️ Opcijska posoda za prah – zbiranje odpadkov ali fluidizirana posoda s direktnim dovodom za aplikator. 🧺💨🎯 Nadglavna prečnica – premika nosilce skozi kabino, zmanjšuje ročno delo. 🏗️➡️💪 Integrirana sita enota (z zabojnikom) – čiščenje vrnjenega prahu za ponovno uporabo, EX-cona vibrator. 🧪♻️⚙️ Ljdjflk Akepfx Al Rort Eksplozijsko varna zasnova – skrbno izbrani deli preprečujejo eksplozivne zmesi. 🛡️💥✅

Stanje: rabljeno, Leto izdelave: 2025, Goods width: 4200 mm Roll width: 4400 mm Number of rollers: 2 x S-roller units S-roller diameter: 350 mm Roller covering: soft rubber, 75 Shore hardness Line pressure: 50 N/mm Total pressure: 22 tons Bath volume: approx. 130 liters Goods guiding for woven fabric, shaped width holder before nip Lsdpowva E Sjfx Al Rsrt Drive shaft: non-driven Dye padding mangle with 2 "floating rollers" arranged horizontally, with liquor trough featuring a guide roller and displacement roller Machine will be completely rebuilt, delivered with warranty (the photo shows a similar machine in delivery condition) New drive will be designed according to application requirements Price approx. €22,000. Warranty: 7 months

Stanje: rabljeno, Goods width: 4600 mm Roller width: 4800 mm Number of rollers: 2 x S-shape rollers S-roller diameter: 350 mm Roller covering: 75 Shore soft rubber Line pressure: 50 N/mm Total pressure: 24 t Liquor tank capacity: approx. 130 liters Ledpfx Alowva Hcj Rjrt Fabric guidance for woven fabrics with curved width holder before nip Drive journal: without drive Dyeing padder with 2 "floating rollers" arranged horizontally, with liquor trough including guide roller and displacer Machine will be completely overhauled before delivery, we deliver with "warranty" (Photo shows a similar machine after overhaul) New drive will be designed according to application requirements Cost approx. 10,000–12,000 EUR Warranty: 6 months

Stanje: novo, Leto izdelave: 2025, dolžina transportnega traku: 3.000 mm, Paint System. Powder Coating Oven 1500 x 3000 x 1800 mm Powder Coating Booth 2800 x 2200 mm Wagner Painting System Oven/Dryer Technical Data: Working dimensions: 1500 x 3000 x 1800 mm with NIKO 24,000 overhead conveyor system • Power consumption: 43 kW • Maximum operating temperature: 220°C Equipment: • NIKO 24,000 overhead conveyor • Convection (uniform temperature distribution across the entire oven) • 2 x fans for air circulation • Safety locks for opening and closing. Powder booth: • Working dimensions: 2800 x 2200 mm • Fan power: 2.2 kW • Airflow: 10,500 m³/h • Very quiet operation • Automatic filter cleaning • LED lighting Wagner Sprint 2 Electrostatic Applicator CHOOSE BUMEX SP. Z O.O. High-quality machinery on the market. Professional consulting and service. Warranty. Warranty and post-warranty support. Comprehensive technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are EC-certified. We offer our own transport – prices are calculated individually based on the offer. Lredpoguku Usfx Al Ret We issue invoices with VAT shown separately. Short delivery times! Machines available in various customer-specific configurations and sizes! Contact us today.

Stanje: novo, Leto izdelave: 2025, skupna dolžina: 1.600 mm, skupna širina: 2.200 mm, skupna višina: 2.350 mm, skupna masa: 250 kg, vrsta vhodnega toka: trifazni, delovna širina: 1.400 mm, Paint booth, paint wall, extraction unit TQN1414 With right- or left-handed exhaust outlet. Working dimensions (mm): 1400 (W) x 1400 (H) x 800 (D) Overall dimensions (mm): 1600 (W) x 2350 (H) x 1250 (D) SPECIFICATION: • Fan power: 1.5 kW • Airflow capacity: 6,500 m³/h • 2 x 100% polyester filters • Filtration efficiency: 99.9% • IP66 control panel • Automatic filter cleaning • Hermetically sealed lighting, IP65 • Paint tank Cabin available immediately (in stock) WHY CHOOSE BUMEX SP. Z O.O.? High-quality machines among the best on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Lrjdpfxod S N I No Al Rot Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are EC certified. We offer our own transport – prices are determined individually for each offer. We provide VAT invoices. Short delivery times! Possibility to order machines in various custom configurations and dimensions! Please contact us.

Stanje: novo, Leto izdelave: 2025, An ideal coating set for car rims, motorcycle frames, and other smaller items, featuring a rail system and trolleys. Powder Coating Oven 1500 x 1500 x 1800 mm Powder Coating Booth 2000 x 1800 mm Oven/Dryer Lrodpfx Alod S N R Uo Rst Technical data: Working dimensions: 1500 x 1500 x 1800 mm • Power consumption: 20 kW • Maximum operating temperature: 230°C Equipment: • Internal trolley • External cart • Convection heating (uniform temperature distribution throughout the oven) • Safe opening and closing locks Powder Coating Booth: Working dimensions: 2000 x 1800 mm Fan power: 2.2 kW Airflow: 10,500 m³/h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. High-quality machines among those available on the market. Professional consulting and service. Warranty. Warranty and post-warranty service. Comprehensive technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products are CE-certified. We offer our own transport – prices are quoted individually for each offer. We issue invoices with shown VAT. Short delivery times! Machines can be ordered in various custom configurations and dimensions! Please contact us.

Stanje: novo, Leto izdelave: 2026, trajanje garancije: 12 meseci, skupna širina: 2.300 mm, skupna dolžina: 1.300 mm, skupna višina: 2.450 mm, vrsta vhodnega toka: trifazni, Powder booth, painting wall, extraction unit TQN2020 Working dimensions (mm): 2000 (W) x 2000 (H) x 400 (D) Overall dimensions (mm): 2300 (W) x 2450 (H) x 1300 (D) SPECIFICATION: • Fan output 2.2 kW • Capacity 10,500 m³/h • 3 x 100% polyester filters • Filtration efficiency of 99.9% • Control panel IP 66 • Automatic filter cleaning • Hermetically sealed lighting IP 65 • Powder reservoir Cabin available immediately (in stock) CHOOSE BUMEX SP. Z O.O. Very high-quality machines compared to products available on the market. Professional advice and service. Warranty. In-warranty and post-warranty service. Complete technical documentation. Lodod S N Szepfx Al Rert 100% customer satisfaction. All BUMEX SP. Z O.O. brand products are EC-certified. We provide our own transport – prices are set individually for each offer. We issue invoices with VAT stated separately. Short delivery times! Option to order machines in various, custom configurations and dimensions! Please contact us.

Stanje: novo, Leto izdelave: 2025, vrsta vhodnega toka: trifazni, skupna masa: 450 kg, skupna višina: 2.500 mm, skupna širina: 4.200 mm, Oprema: osvetlitev, The company BUMEX SP. Z O.O. presents a powder coating booth. Working dimensions: 4,000 x 2,200 mm 5 filters Automatic filter cleaning with adjustable interval from 10 to 1,200 seconds Fan: 2 x 2.2 kW, 9,500 m³/h each = 19,000 m³/h total 2 x LED lamp Delivery time: 14–21 days Our booths stand out due to their very high build quality, operational safety, and the customization of booth parameters to fit your requirements. We provide expert consultation on the selection of paint booths, dust extraction systems, extraction units, and industrial heat recovery systems. CHOOSE BUMEX SP. Z O.O. - Very high quality of machines offered on the market - Professional advice and support - Warranty - Warranty and post-warranty service - Complete technical documentation - 100% customer satisfaction - All BUMEX SP. Z O.O. products have the WE certificate Lodpfx Alshfwy He Rort We offer our own transport—prices are arranged individually per offer. We issue invoices with VAT separately listed. Short lead times! Possibility to order machines in various, customized configurations and dimensions! Please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, rezalna sila: 630 t, moč: 110 kW (149,56 KM), skupna širina: 2.400 mm, skupna dolžina: 9.400 mm, skupna višina: 3.800 mm, skupna masa: 50.000 kg, dolžina rezanja (maks.): 1.600 mm, vrsta vhodnega toka: trifazni, Scrap Shear MS-6300mex (Mobile Scrap Shear with Electric Motor) A 250kW diesel generator can be offered separately. Model: MS-6300mex Cutting force: 630 t Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 8–15 t/h Machine weight: 50 t (+ diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-efficient - No foundation required Ledpfxer Ihzis Al Rort The scrap shear is capable of cutting almost all types of scrap material. Note: The machine is not recommended for cutting high-carbon steel, such as: axles, wire ropes, pig iron, spring steel plates, rails, alloy steel, hubs, etc. (These hard materials will damage the cutting blades) Function: Scrap is loaded into the feed area with an excavator. Due to the horizontal feed area and the scrap’s own weight, it falls down into the loading chamber and cutting area. The scrap is compressed against the front wall and is cut by the horizontally moving tool carrier over the blades mounted at the front wall. As the tool carrier moves horizontally, the processed material is extruded over the blades at the front of the container. When returning to the rear position, the loaded scrap moves into the shear under its own weight. Scrap shears are available in various configurations according to customer requirements, and the output size can be selected (for new orders). Inspection and trial operation are possible.