Jedro Vrtalni Stroj nakup rabljenega (75.642)

Stanje: rabljeno, 300281 Elektro-pnevmatični stroj za vrtanje čašastih spon Portas BEV za vrtanje čašastih spon ali okovja. Odlagalna miza: pribl. 300 x 37 cm Teža: 180 kg Fsdpevlw Uqofx Afljft

Stanje: zelo dobro (rabljeno), Portal machine Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Ffjdodg Itnopfx Aflot Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PRJ061185, globina grla: 190 mm, največja hitrost vretena: 4.300 obr/min, hitrost vretena (min.): 225 obr/min, premer stebra: 65 mm, zmogljivost vrtanja: 18 mm, vrsta vhodnega toka: trifazni, nosilec vretena: MK 2, vhodna napetost: 400 V, pomik vretena: 80 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine d’exposition, année 2020 – avec légères traces d’utilisation. La machine a uniquement servi aux démonstrations dans notre salle d’exposition. Inclut lampe machine – sans mandrin de perçage. Équipement standard : - Bouton-poussoir d’arrêt d’urgence à tête champignon (verrouillable) - Inverseur de rotation avec position 0, commande manuelle pour rotation droite/gauche - Interrupteur principal avec disjoncteur moteur verrouillable - Réglage progressif de la vitesse - Degré de protection IP 54 - Carter de broche avec verrouillage électrique - Peinture : laque structurée DD signal blanc RAL9003, PANTONE 7545c, noir ----- Données techniques : Capacité de perçage dans l’acier E335 (St 60) : 18 mm Taraudage dans l’acier E335 (St 60) : M12 Taraudage en fonte EN-GJL-200 (GG 20) : M14 Porte-outil, broche courte : CM2 Fedpfx Afjx Nn Sgsloft Distance colonne-broche : 190 mm Course de la broche : 80 mm Diamètre de la colonne : 65 mm Avance : manuelle Entraînement : progressif Moteur d’entraînement : 750/1 500 tr/min, 0,37/0,55 kW Vitesses de broche : 225–4 300 tr/min Tension de service : 400V/50Hz

Stanje: novo, Leto izdelave: 2026, Vrtalni in vijačni stroj za hkratno vrtanje, lepljenje in vbijanje moznika v sistemu 32 mm z večvretensko vrtalno glavo in nastavljivimi postajami za moznike. Kratek opis: • Univerzalni vrtalni in vijačni stroj za moznike • Zelo enostavno upravljanje • Zaprt sistem za lepilo • Primeren za obdelavo plošč in masivnega lesa • Opcijska dodatna vertikalna vrtalna enota • Razbremeni CNC obdelovalne centre Fjdodx Aw Nopfx Afljft • Optimalna dopolnitev za nesting stroje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.800 mm, premer vretena: 130 mm, skupna masa: 32.450 kg, leto zadnje generalne obnove: 2014, Stroj je v zelo dobrem tehničnem stanju, CNC krmilni sistem Heidenhain iTNC 530. Parametri: Premer delovnega vretena: 130 mm Pomik osi X: 3000 mm Pomik osi Y: 1800 mm Stožčasta odprtina v vretenu: ISO 50 Izvlek delovnega vretena: 1120 mm Ffedsx Hfk Ispfx Aflst Vodoravni izvlek vretenaste glave: 450 mm Priključna moč vseh motorjev: 50 KVA Dimenzije (d x š x v): 10100x4380x5250 mm Teža: 32 450 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, 1 x namizni vrtalni stroj Flott TB 10 Eco Letnik izdelave: 2018 V stanju kot nov. Ffjdpfox Nbmdjx Afljt (Dodatne fotografije in opis sledijo)

Stanje: rabljeno, Leto izdelave: 1998, potovalna razdalja osi X: 8.300 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.000 mm, obremenitev mize: 30.000 kg, premer vretena: 220 mm, BRAND: COLGAR MODEL: FRAL 70 C16 CATEGORY: CNC BORING MACHINE YEAR: 1998 CNC CONTROL: ECS CNC2600 MACHINE DIMENSIONS Length: 14,000 mm Width: 9,000 mm Height: 6,500 mm Fjdpfx Afjx E U R Ijlsft SPINDLE HEAD Quill diameter (boring): 160 mm Spindle nose type: ISO-50 Milling spindle diameter: 220 mm Spindle speed range: 2 – 1,665 rpm Spindle motor power: 55 kW Bi-rotary automatic head (overhauled) A axis – minimum angle: 2.5° C axis – minimum angle: 1° Automatic head change system Through-spindle coolant with high-pressure pump WORKING CAPACITY X axis: 8,300 mm Y axis: 3,000 mm Z axis: 1,000 mm V axis: 2,000 mm W axis: 800 mm B axis rotation: 360° A axis (bi-rotary head): 360° (minimum angle 2.5°) C axis (bi-rotary head): 360° (minimum angle 1°) RAM dimensions: 645 x 500 mm ROTARY TABLE Table dimensions: 2,500 x 2,500 mm Max load capacity: 30,000 kg No. 2 Stolle plates: 4,000 x 2,000 mm each FEEDS Rapid traverse (X, Y, Z, V, W axes): 8,000 mm/min Working feed (X, Y, Z, V, W axes): 6,000 mm/min TOOL MAGAZINE Capacity: 60 tools Tool shank: DIN 69871-B50 ACCESSORIES Machine complete with accessories, Stolle plates and rotary table

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Ffededz Uk Tjpfx Aflst Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: zelo dobro (rabljeno), Vrtalni stroj, vrtalni stroj za stružene elemente Triade Fjdpfx Ajx Dra Usfloft Število vrtalnih agregatov: 3

Stanje: novo, Leto izdelave: 2026, Natančen in precizen moznični vrtalni stroj za vrtanje v korpusu, vrtanje za okovje in vrstne izvrtine ter za vrtanje v okvirni konstrukciji v SISTEMU 32 mm. DB je moznični avtomat z 21, 27 ali 35 preciznimi vrtalnimi vreteni. Kratek opis: • Univerzalni vrtalni stroj za plošče in masiven les • Vrtalni stroj s sistemom za kompenzacijo kotnih napak Fodpfx Afedxz Nkjloft • Vrtanje v SISTEMU 32 mm • Masiven precizen menjalnik za vrtanje znamke GANNOMAT • Najenostavnejše nastavitve prek mehanskih digitalnih števec za stranske in čelne prislone ter za višino vrtanja • Hitro menjavni sistem brez uporabe orodja za prislonilo • Moznične izvrtine, vrstne izvrtine, vse vrste pohištvenih spojnikov, izvrtine za ročaje in prehode, izvrtine za lončaste tečaje, skupine 3, 5 in 7 izvrtin, izvrtine za vodila predalov, izvrtine za okvirje vhodnih vrat in mizne noge itd.

Stanje: dober (rabljeno), Column drilling machine MK3 by ERD* – MK3. Drill press, pedestal drill, column drill, pillar drill - Handover: in as-is condition as inspected - Motor: HEW 0.8 kW - Table size: Ø 355 mm - Spindle taper: MK3 - Travel: 500 mm - Throat depth: 300 mm - Column: Ø 110 mm - Spindle stroke: 150 mm - Transmission: via V-belt - Dimensions: 850/500/H1850 mm - Weight: 294 kg Condition: used Ffjdpfx Aotvfhvoflot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 480 mm, pomik osi Y: 175 mm, pomik po osi Z: 280 mm, največja hitrost vretena: 3.000 obr/min, poteza s peresom: 50 mm, nosilec vretena: MK 2, skupna masa: 100 kg, dolžina mize: 700 mm, širina mize: 180 mm, Stroj je pregledan in v dobrem stanju. Na voljo takoj. Ffodpfx Aox Ndkfjflet

Leto izdelave: 2025, obratovalne ure: 12 h, Stanje: novo, Čelni avtomatski vrtalni stroj za vrtanje nogic, pod različnimi koti, z nihajno mizo. Trojno vrtanje z odvodom ostružkov, stroj lahko deluje v različnih nastavitvah in konfiguracijah. Namenjen je za prebojno vrtanje. Fedoxb Elxepfx Afloft

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles Ffsdpfjgwbbqsx Afljt No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: dober (rabljeno), Leto izdelave: 1977, dobro delujoče stanje Ffodpfox N T Dhsx Afljt

Stanje: novo, Leto izdelave: 2026, Dvojna vrstična in okovja vrtalni stroj v SISTEMU 32. Vrtilni stroj z dvema vrtalnima tramovoma, vsak z 25 preciznimi vrtalnimi vreteni. Fsdpfedxz Ntjx Afleft Kratek opis: • Vrtanje vrstic lukenj v SISTEMU 32 mm • 50 (2 x 25) vrtin na en delovni takt • Izravnava globine vrtanja za različne globine vrtin • Masivni precizni vrtalni menjalnik GANNOMAT • Vrstično pohištveno spojno in skodelično pant vrtanje (opcijsko) • Opcijska 3. vrtalna enota

Stanje: rabljeno, Row drilling and fitting bore machine LAUTENSCHLÄGER Meplamat 300 Ffsdpfx Aevtm Ayoflst pneumatic hold-down device, press-in unit, stop rulers

Stanje: novo, Leto izdelave: 2025, Mere (dolžina/širina/višina) 1300x1200x1200 mm Ffodpjv A Hydefx Aflot Teža 700 kg Skupna potrebna moč 1,9 kW Dolgorezna vrtalna naprava YOM-120 - maks. širina reže 120 mm - maks. globina utora 50 mm - Oscilacija 6,6-400 gibov/min. - Hitrost vrtenja 9500 obr./min. - Motor 2 KM - Motor z oscilacijo 0,5 KM - Priključek za stisnjen zrak 6 bar - Neto teža 700 kg - Dimenzije 1300 x 1200 x 1200 mm - Komplet z 2 pnevmatskima vpenjaloma

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Fjdpegk T Ttefx Afljft Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: rabljeno, Row drilling machine GANNOMAT Compact 30 - used - pneumatic hold-down clamps, foot pedal operation, 2 drilling beams each with 15 spindles ----- Technical Data ----- Number of spindles: 30 pcs, spindle spacing: 32 mm, motor power: 2 x 0.75 kW, voltage: 400 Volt, compressed air connection: 6 bar, Ffjdpfjwmmt Rex Aflst dimensions without stop ruler: 850 x 1,100 mm, weight: 240 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (length/width/height) 720x900x1160 mm Weight 120 kg Total power requirement 2.2 kW Slot mortising machine LBM-500 - Drill table size 500 x 210 mm - Drill table height 760 - 900 mm - Max. drilling depth at 90° 150 mm Fodpfsvz Hk Tsx Afljft - Drilling width 300 mm - Height adjustment 140 mm - Speed 2800 rpm - Westcott chuck 0 - 16 mm - Extraction port diameter 100 mm - Motor power S1 100% 2.2 kW - Voltage 400 V - Dimensions W= 720 mm D= 900 mm H= 1160 mm - Weight 120 kg Complete with: - Precise and very smooth table movement due to multiple bearings - Simple table height adjustment via dovetail guide - Table height position adjustable via handwheel - High-quality 2-jaw chuck - Storage compartment for tools in the machine stand - Dowel boring device with 4 different indexing levels Scope of delivery: - 2-jaw chuck (16mm) - Eccentric clamp

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports Fsdpfx Aofz Naneflsft CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW WORKPIECES, min. width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC Ffjdpfx Aou Tp Sloflot - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 6 upper vertical workpiece clamps + No. 2 continuous-feed screws for chip extraction CNC control - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 HP each and 11 drilling spindles per head); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 HP each, with various head configurations); - No. 3 upper drilling supports (each with 2.3 HP drilling heads, with various head configurations); - No. 6 upper vertical workpiece clamps - No. 2 continuous-feed screws for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control NC 500 (Software Tooling System + Woodmaster) Fedpfx Ast Ig A Soflsft W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE “BIESSE” Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each 1.8 kW and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each 1.8 kW and various drilling heads); - No. 3 upper drilling units (each with drilling heads, each 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal The second drilling machine is connected to the CNC of the first machine.

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) Fodpfx Afjvnq Txjlsft - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction