Izpušni Sistemi nakup rabljenega (8.331)

Stanje: novo, Leto izdelave: 2025, The radial turbine is located in the vacuum cabin on the clean air side in special sound-absorbing enclosures. The new generation reinforced turbine and large filtration area deliver more efficient and effective performance, while also contributing to energy savings. Advantages: - The DCV 7500 extraction system represents another milestone in the production of efficient chip and dust extractors, designed to maintain consistent extraction parameters throughout the entire work cycle. - Durable, heavy-duty construction ensures quiet and vibration-free operation of the extractor. - Proven reliability, as confirmed by manufacturing facilities handling high-volume orders daily. - Compact footprint, yet capable of extracting large amounts of dust and shavings. - Large-diameter 280 mm metal suction nozzle ensures excellent air flow. - Powerful and quiet fan guarantees high vacuum extraction capacity! - Special blade design enhances efficiency and effectiveness while saving energy. - Very high airtightness of the entire suction system guarantees optimal indoor air quality, and during the heating season prevents heat loss. - Large filter surface area. - Possibility of building an overhead system to connect several machines simultaneously to DCV 7500E extractors. - Quick change of waste collection bags, designed to maintain 99.99% system tightness. - Low noise and high performance thanks to a balanced metal impeller. - Ensures a clean and perfect work station, directly improving the quality of your products. - Excellent compatibility with machines such as grinders, edge banders, panel saws, etc. - We guarantee high-quality air purification! - Polyester filter traps particles up to 5 microns; for smaller particles, a HEPA filter should be used. - This extractor must not be used in explosive atmospheres. - The extractor is intended for use in the woodworking industry with sawdust, chips, and dust (not suitable for wet materials, e.g., wet sawdust). Technical data: MOTOR POWER (CONTINUOUS DUTY S1): 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 7500 m³/h SUCTION NOZZLE DIAMETER: 280 mm SUCTION VELOCITY: 28–32 m/s FILTER SURFACE AREA: 18 m² Gjdpfx Aovzqtxofqsil FILTER MATERIAL: Polyester, 5 micron NUMBER OF FILTERS: 35 DIMENSIONS: 1040 x 625 x 2150 mm WEIGHT: 306 kg Manufacturer: Cormak

Stanje: novo, Fiber Laser Cutting System FLV-3015-CH 3kW / VF1530-3000W Technical Specifications - Maximum sheet size: 3000 x 1500 mm - X and Y-axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y-axis positioning accuracy: ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7 G - Maximum load capacity: 1200 kg - Laser power: 3.0 kW - Power consumption: 24.0 kW Gedpex A U Irsfx Afqoil - Source brand: Choice of Raycus or MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting Thickness - Carbon steel: recommended 20.0 mm, maximum 22.0 mm - Stainless steel: recommended 8.0 mm, maximum 10.0 mm - Aluminium: recommended 6.0 mm, maximum 8.0 mm - Brass: recommended 5.0 mm, maximum 6.0 mm Design The machine is extremely stable thanks to its welded construction. Japanese Fuji servo drives enable high speed with high precision. Automatic lubrication system for axis guides. Ease of Use Loading heavy sheets is simplified by built-in transport balls that ensure sliding during loading. Collecting small finished parts is also easier thanks to trays under the machine that can be pulled out using practical handles. RayTools cutting head with autofocus Option - Otinus Protect This product offers individual protection for your laser source. With this service you ensure the continuity of your business. We safeguard your operations to help you meet deadlines. Option - Voltage Stabilizer Control Panel The computer runs Windows and CypCut software, offering functions such as design, file import/export, and workflow optimization. Installed software comes with a lifetime license. The machine is equipped with a wireless controller. Professional Support We maintain close contact with our clients. That’s why we include a service package of Otinus Specialist Assist hours with every machine purchased. Otinus Academy Learning Software When you purchase this device, you receive a one-year online course access to train new operators or refresh existing knowledge! Free Drawing Package Each Otinus laser cutting system comes with a package of ready-to-use CAD drawings. Machine Price Includes: 2-day commissioning and operator training - Day 1 (up to 8 hours) – Commissioning and controller explanation. - Day 2 (up to 8 hours) – Independent machine operation under supervision of our technician – includes possibility to program customer-specific parts. Professional Consulting - By phone: 7:30 to 21:00 (Mon-Sat) – 8-hour package valid for 12 months. - Online: 7:30 to 14:30 (Mon-Fri) – 8-hour package valid for 12 months. Access to online training courses - LibreCAD – 12-month access Additionally Included - CAD drawing package

Stanje: pripravljen za uporabo (rabljen), Cutting Systems Müller Martini Central Cutting Device Gsdjibil Uopfx Afqeil

Stanje: zelo dobro (rabljeno), O04018) No. 1 FILTER (extraction substation) - Total air flow: 18,000 m³/h (estimated) _____ O04019) No. 1 FILTER (extraction substations) - Total air flow: 50,000 m³/h (estimated) - Power: approx. 90 kW _____ O04020) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: approx. 30 kW _____ O04021) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ O04022) No. 1 FILTER (extraction substations) - Total air flow: 36,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ O04023) No. 1 FILTER (extraction substations) - Total air flow: ????? m³/h (estimated) Gsdpfxjwrdw Re Afqoil - Power: 30 kW - No. 180 filter bags (each with a diameter of 123 mm x 3000 mm length) _____

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 733 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving both efficiency and ergonomics. The height adjustment is provided as standard via manual hydraulics, within a range of 650 – 1050 mm (greater or lower adjustments available upon request). Like the SST fixed series, the worktop also features a 100 x 100 mm grid pattern with Ø 28 mm holes. When used in combination with machining equipment, inspection or rework fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced on site immediately after removal from the machine and then transferred to maintenance for repairs. The fully bolted construction of the clamping plate allows the working surface to be replaced cost-effectively if it becomes worn. Giodpfxjfk Aifo Afqjl Price must be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Leto izdelave: 2025, The CORMAK DCV5200E+ dust extractor is a high-performance unit for removing dust and wood chips, ideal for the woodworking industry. It features a 3 kW motor, 5200 m³/h extraction capacity, and 18 polyester filters retaining particles down to 5 microns. Its compact design, metal impeller, and capability to connect to multiple machines ensure efficient operation and workplace cleanliness. The extractor is equipped with an automatic filter cleaning system! Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3 kW / 400 V, 50 Hz SPEED 3000 rpm EXTRACTION CAPACITY 5200 m³/h SUCTION INLET DIAMETER 200 mm SUCTION VELOCITY 30 m/s FILTER SURFACE AREA 10 m² FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 2441 x 940 x 2270 mm WEIGHT 260 kg Giedpfx Ajwlr Azefqsl Manufacturer: Cormak

Stanje: novo, Many of our machines are available from stock. Call us to learn more! The offer applies to the machine’s basic version. All optional equipment and their prices can be found on our website. Fiber Laser Cutting System FLV-6025-CH 3kW Technical Specifications - Maximum sheet size: 6000 x 2500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable X and Y axis positioning accuracy: ±0.03 mm - Maximum speed: 60,000 mm/min - Maximum acceleration: 0.7G - Maximum load capacity: 1,200 kg - Power output: 3 kW - Power requirement: 24.0 kW - Source brand: MAX Photonics - Supply: ~3x400 V, 50 Hz - Protection class: IP54 Construction - Construction type: welded frame - Number of support legs: 8 - Servo drives: Schneider - Gears and racks: helical - Linear guides: HIWIN - Gearboxes: Motovario - Racks: YYC - Ball bearings: NSK - Pressure valves: SMC - Cooling: water chiller Automatic lubrication system for axis guides. User Comfort Loading heavy sheets is made easier thanks to integrated transport balls in the table surface, which ensure smooth sliding during loading. Picking up small finished parts is also much easier thanks to pull-out trays with practical handles located underneath the machine. RayTools cutting head with autofocus Gsdpfx Asx A U I Sjfqjil Otinus Protect (optional*) This product provides customized protection for your laser source. With this service, you can ensure uninterrupted operation in your company. We secure your business so you can complete your orders on time. Control Panel The computer operates on Windows 10 and uses CypCut software for processing, which includes features such as design, file import/export, and workflow optimization. All installed programs come with lifetime licenses. The machine is equipped with a wireless controller. Professional Support We ensure we are always in close contact with our customers. That’s why, with the purchase of a machine, we provide a professional support hours package from Otinus technicians. Otinus Academy Learning Software With the purchase of this machine, you receive one-year access to online courses, making it easy to onboard new employees or refresh training knowledge! Machine Delivery Includes: - 2-day training and machine installation: - Day 1 up to 8 hours – commissioning and control system training - Day 2 up to 8 hours – independent work on the machine under supervision of our technician, including custom programming options - Consultation with our specialists: - By phone: 7:30 am to 9:00 pm (Mon–Sat) – 8-hour support package to be used within 12 months - Online: 7:30 am to 2:30 pm (Mon–Fri) – 8-hour support package to be used within 12 months - Access to Otinus Academy online courses: - LibreCad – 12 months' access Additionally, you receive: - CAD drawing package

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Approx. weight: 850 kg Special worktable systems from the SST, SFT, and SWT fixed series serve as 3D clamping workstations for efficient assembly, welding, and bonding of constructions such as fixtures, railings, frames, etc. With the help of the extensive range of clamping accessories (see catalog section 'Welding Table Accessories'), these table systems can also be used as flexible, reconfigurable fixtures, enabling high-quality production of small to medium batch sizes. The special worktables feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop with a Ø28 mm hole grid. Additionally, the tabletop offers a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The table perforation supports the use of various clamping and positioning elements. For special applications, the tabletop surface can, upon request and deviating from the standard, be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be cost-effectively replaced in case of wear, making the table system particularly sustainable and durable. Gjdpfx Afsfk Aigeqeil Price must be requested from the manufacturer prior to order! For accessories and further information, please follow this link:

Stanje: novo, Leto izdelave: 2025, Reliability confirmed by our clients, who tackle large orders on a daily basis. Contaminants from the filter fall directly into a sealed bag, allowing for quick unloading. Intended primarily for the filtration of chips and fine dust particles in the woodworking and furniture manufacturing industry. Advantages We guarantee filtration quality! Space-saving design that still enables the extraction of large quantities of dust and chips Reliability proven by production facilities working daily with major contracts Heavy-duty, vibration-free hardened construction ensures maintenance-free machine operation Dynamically balanced metal impeller for reduced noise levels 200 mm diameter metal suction nozzle allows for significantly higher airflow Possibility to build an overhead system and connect several machines operating simultaneously with DCV E extraction units Large filter surface area Special blade design increases efficiency and contributes to energy savings Highly airtight suction system guarantees the best air quality inside the plant and heat retention during the heating season Quick-change design of plastic collection bags maintains 99.99% system hermeticity The DCV 4500E represents the next step in the production of efficient dust extractors, aiming to maintain consistent extraction parameters throughout the full duty cycle This type of extractor will ensure perfect cleanliness at the workstation, directly contributing to the quality of your products Perfectly compatible with machines such as sanders, panel saws, edgebanders, circular saws, and panel saws The use of this extractor is prohibited in explosive atmospheres Designed for use in the woodworking industry for dry sawdust, chips, and dust (not suitable for wet materials, e.g., wet sawdust) The polyester filter stops dust particles as small as 5 microns; to filter smaller particles, use a HEPA filter or similar Technical parameters Gsdpfx Ajuc Uchofqoil CONTINUOUS OPERATION MOTOR POWER S1 3.0 kW / 400 V, 50 Hz RPM 2900 rpm EXTRACTION CAPACITY 4500 m³/h SUCTION NOZZLE DIAMETER 200 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 170 x 1035 mm FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 12 DIMENSIONS 1530 x 665 x 2200 mm WEIGHT 120 kg

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2480 x 1230 x 800 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 650 kg Gjdefk Aihjpfx Afqoil Special work table systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalogue section welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality manufacturing of small and medium production runs. The special work tables feature a worktop with either a 16 mm thickness (dual Standard) or 25 mm (triple 24+1) thickness, equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The hole pattern allows the use of various clamping elements and fixing aids. For special applications, the tabletop surface can, on request, be fitted with stainless steel 1.4301, aluminium, plastic, or high-strength materials such as ST70, as an alternative to the standard version. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This makes the table system particularly sustainable in the long term. Price must be requested from the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Stanje: novo, Leto izdelave: 2025,

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Gjdpjfk Aivofx Afqeil Price must be confirmed with the manufacturer before ordering!!

Stanje: novo, Leto izdelave: 2025, The manufacturer guarantees cleaning quality. A certified control cabinet enables continuous monitoring of correct operation. The 11 kW / 11,300 m³/h vacuum fan operates on the turbine principle, and the fan’s sound-insulated housing significantly reduces operational noise emissions. Exceptional tightness of the entire suction system ensures optimal air quality inside the facility and eliminates heat loss during the heating season. Advantages of DCV dust extraction systems: - Robust, heavy-duty construction ensures quiet and vibration-free operation of the dust extractor - The new TC extraction series features a fully enclosed upper housing that absorbs noise and vibrations generated during operation and allows for warm air recirculation - Exceptional airtightness of the entire suction system guarantees the best air quality inside the facility and no heat loss during the heating season - Powerful and quiet radial fan provides high negative pressure performance - Possibility of creating an overhead system to connect multiple machines operating simultaneously with DCV extraction - Reliable automatic-filter cleaning system with automatic cycle capability - Mobile chassis simplifies effortless relocation of extraction units throughout the facility - Waste containers designed to ensure 99.99% system airtightness, equipped with a mobile running gear - Control panel for switching the device on and off - Polyester filter captures dust particles down to 5 microns; for finer particle filtration, a HEPA or similar filter must be used Giedpfx Afeudalwsqsl - The use of this extractor in explosive atmospheres is prohibited - The unit is not designed for operation with wet materials (e.g., wet sawdust) - Before operating the extractor, the lower beam must be removed to allow free access to the chip bins - Warm air return/reduction system available as an optional extra Technical specifications: Supply voltage: 400 V Power: 11 kW Motor speed: 3,000 rpm Filter type: Polyester Filter dimensions: Φ160 x 960 mm Number of filters: 64 pcs Inlet diameter: 350 mm Outlet diameter: 500 mm Capacity: 11,300 m³/h Dimensions (W x L x H): 1,190 x 3,160 x 2,320 mm (without upper bend/elbow) Net weight: 710 kg

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 355 kg Special workbench systems of the SST, SFT, and SWT fixed series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be flexibly configured as fixtures, enabling high-quality manufacturing of small and medium batch sizes. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern of the table allows for the use of a wide variety of clamping elements and positioning aids. For special requirements, the tabletop surface can also be supplied, upon request, in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, instead of the standard option. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of wear, which ensures the table system remains sustainably reusable. Price needs to be requested from the manufacturer prior to ordering! Gjdpfxjfk Ai Ds Afqjil For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 288 kg Gisdpfx Asgrvwfjfqol Special workbench systems from the SST, SFT and SWT series (fixed series) serve as 3D clamping workstations for the efficient production of assemblies, welded structures, and bonded constructions, e.g. jigs, railings, frames, etc. With the help of the extensive range of clamping accessories (see welding table accessories catalog section), these table systems can also be used as flexibly configurable fixtures, thus enabling the high-quality production of small and medium series. The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. In addition, the table top is marked with a 100 x 100 mm grid for easy alignment of workpieces or fixtures. The table perforation allows for the use of various clamping elements and positioning aids. For special applications, the table top surface can, as an option to the standard, also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures long-term sustainability of the table system. Price must be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Leto izdelave: 2024, Hole diameter: 20 mm Dimensions (LxWxH): 2480 x 1200 x 930-1003 mm Table width: 1200 mm Table length: 2250 mm Working height: 930 - 1003 mm Plate thickness: 12 mm Product Specifications – Welding Tables - Plate size: 2480 mm x 1200 mm - All-round reinforcement rim, 140 mm high, fitted with a double-row hole grid. - The hole grid is spaced 100 mm x 100 mm (center to center). - Equipped with the necessary reinforcing ribs across width and length. - Table material: S355, pickled and oiled. - The legs are fitted with ball joints and are height-adjustable. - The welding table is oiled and pickled, creating a smoother work surface and making the table less susceptible to weld spatter. Additional Options: Engraved guide lines: €85 Hole diameter 16 mm: €80 Hole diameter 28 mm: €80 Diagonal hole pattern 50x50 mm: €250 4 adjustable castors: €360 Giedpfx Afjukkrveqsl The welding tables with feet and rollers are height-adjustable. Working height from 92 to 93 cm. The legs can be adjusted up to 10 cm higher. A welding table with adjustable rollers has a minimum working height of 87 cm. The rollers can be set to a maximum working height of 100 cm.

Stanje: novo, Leto izdelave: 2024, Diameter of holes: 20 mm Dimensions (LxWxH): 1000 x 1000 Working height: 93-103 cm Product Specifications Welding Tables - Tabletop size: 1000 mm x 1000 mm - Surrounding reinforcement edge, 140 mm high, fitted with a double row hole grid. - Hole grid spacing is 100 mm x 100 mm center-to-center. - Equipped with necessary reinforcement ribs along both width and length. - Table material: S355, pickled and oiled. - Feet are fitted with ball joints and are height-adjustable. - The welding table is oiled and pickled, providing a smoother working surface and increased resistance to welding spatter. - Plate thickness: 12 mm Additional options: Giedpoukkr Asfx Afqol • Engraved lines: 80¤ • 16 mm hole diameter: 100¤ • 28 mm hole diameter: 100¤ • Diagonal hole grid 50x50: 100¤ • 4 adjustable castors: 360¤

Stanje: novo, Leto izdelave: 2024, Diameter of holes: 20 mm Dimensions (LxWxH): 2250 x 1000 x 1000 mm Table width: 1000 mm Table length: 2250 mm Working height: 93–103 mm Tabletop thickness: 12 mm Medium-duty welding table Product Specifications – Welding Tables - Plate size: 2250 mm x 1000 mm - All-round reinforcement edge, 140 mm high, fitted with a double-row hole grid - Hole grid: 100 mm x 100 mm center-to-center - Equipped with required reinforcement ribs along width and length - Table material: S355, pickled and oiled - Legs equipped with height-adjustable ball joints - The welding table is oiled and pickled for a smoother working surface and reduced susceptibility to weld spatter Additional options: Engraved grid lines: €75 Hole diameter 16 mm: €80 Hole diameter 28 mm: €80 Gijdjukkr Nopfx Afqjl Diagonal hole pattern 50x50: €150 4 adjustable castors: €360

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1450 x 950 x 800 mm Table width: 950 mm Table length: 1450 mm Approx. weight: 288 kg Gisdpfjfkzcvex Afqsl Special worktable systems from the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see the welding table accessories section in the catalogue), these table systems can also be used as flexible, reconfigurable fixtures. This enables high-quality manufacturing of small and medium-size production runs. The special worktables feature a 16 mm (dual Standard) or 25 mm (tripple 24+1) thick worktop, equipped with a Ø28 mm hole matrix. In addition, the table surface has a 100 x 100 mm grid marking for easy alignment of workpieces or jigs. The table hole pattern allows the use of a wide variety of clamping and positioning elements. For special applications, the table surface can, if required, be supplied in stainless steel 1.4301, aluminium, plastic, or high-strength materials ST70, differing from the standard version. Due to the fully screwed construction of the clamping plate, the work surface can later be replaced cost-effectively in case of wear. This makes the table system particularly sustainable and long-lasting in use. Price must be requested from the manufacturer prior to placing an order! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm; Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm; Table width: 1230 mm; Table length: 2480 mm; Approx. weight: 555 kg. Godpfx Afefk Aicsqoil This allows the user to flexibly adjust the working surface height to meet specific requirements, improving both efficiency and ergonomics. The height adjustment is performed as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. When used in conjunction with machining equipment, inspection or reworking fixtures (such as deburring, marking, or testing) can be adapted precisely to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools, thanks to their various mounting and securing options. Once removed from the machine, tools can be safely serviced on-site and transferred to maintenance for repairs as needed. The fully bolted construction of the clamping plate allows for cost-effective replacement of the working surface in case of wear. Price must be confirmed with the manufacturer before ordering!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 481 kg Special workbench systems of the SST, SFT and SWT fixed series are 3D clamping workstations designed for efficient manufacturing of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. With the help of a comprehensive range of clamping accessories (see catalog section Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the table top includes a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows the use of a wide variety of clamping elements and positioning aids. For specific applications, the table surface can be optionally supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, instead of the standard. Thanks to the fully bolted design of the clamping plate, the work surface can be economically replaced in case of wear. This ensures the table system remains particularly sustainable in long-term use. Price must be requested from the manufacturer prior to ordering! Gisdpofk Aimofx Afqel For accessories and more information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 945 kg This enables the user to flexibly adjust the working surface height to meet specific requirements, thereby improving efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within the range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 hole grid. Used in combination with machining equipment, the table allows test or finishing fixtures (deburring, marking, or inspection) to be adapted to the height of the machine's clamping table. The table systems can be relocated easily using a pallet jack. These mobile systems, with their various fastening and safety features, have proven ideal for the maintenance of injection molding and die-casting tools. After removal from the machine, tools can be serviced safely on-site and transported to maintenance for repairs. The fully bolted construction of the clamping plate allows for the cost-effective replacement of the work surface in case of wear. Gedpfefk Ainjx Afqoil Price must be obtained from the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Gjdpfefk Aipox Afqeil Weight approx.: 630 kg This enables the user to adjust the working surface height flexibly to the respective requirements, improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic system within a range of 800 mm (on request, other heights available). Like the SST fix series, the worktop is equipped with a 100 x 100 mm Ø 28 mm hole grid. When used in combination with machining equipment, inspection or post-processing fixtures (deburring, marking, checking) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated using a pallet jack. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced on site and then transferred to maintenance for repairs. Due to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Gisdjfk Ai Aspfx Afqol Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 358 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). The worktop, as with the SST Fix series, also features a 100 x 100 mm Ø 28 perforated grid. When used in combination with processing machines, inspection or reworking fixtures (deburring, marking, checking) can be adapted to match the clamping table height of the machine. The table systems are easily relocated using a pallet jack. These mobile systems, with various fastening and securing options, have proven to be ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Table height: 800 mm Godpefk Ai Eefx Afqsil Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 375 kg Special workbench systems of the SST, SFT, and SWT fixed series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, e.g., fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium batches. The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop featuring a Ø28 mm hole grid. Additionally, the tabletop comes with a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows for the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be supplied, deviating from the standard, in stainless steel 1.4301, aluminum, plastic, or even in high-strength ST70 materials. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively when worn, ensuring the table system remains especially sustainable in use. Price must still be requested from the manufacturer before ordering! For accessories and further information, please follow this link: