Index Er 25 nakup rabljenega (163)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, največja hitrost vretena: 7.000 obr/min, Premer palice (maks.): 42 mm, potovalna razdalja osi X: 70 mm, pomik osi Y: 70 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-B, število osi: 10, This 10-axis Index C100 horizontal lathe was manufactured in 2018. It features impressive axis travels of 70 mm in the X and Y directions, and 400 mm in the Z direction. The machine is equipped with three turrets with driven tools capable of reaching 8,000 rpm, and a counter spindle diameter of 42 mm. If you are looking for a high-quality turning machine, you should consider the Index C100, which we are offering for sale. Contact us for more details. • Production hours: approx. 15,000 h • Spindles: Main and counter spindles with D42; counter spindle Ø42 mm, 7,000 rpm • Turrets: 3x VDI25 with Index W-gearing; driven tools on all three turrets, up to 30 powered tool positions, 8,000 rpm • Coolant system: Emulsion; flushing next to main and counter spindle; through the counter spindle; 8 bar pump; 18 bar booster pump (no Eco Fluid 80 bar); mechanical coolant filter (no paper filter); coolant tower for the cooling of main/counter spindles and control cabinet • Software/Functions: Milling cycles Transmit / Tracyl Ksdpfxoyuwyvo Adkslp • Monitoring: Index Motorforce tool monitoring for Fanuc • Interfaces/Preparation: Ünimag4 interface for bar feeder; preparation for oil mist extraction system (mechanical flange D200 mm; electrical Harting connector 3x240 V) • Clamping: SK45 in the main spindle (without collets); E173 in the counter spindle (without collets) • Storage/Condition: The machine is stored under power in a heated warehouse Additional equipment • Bürener chip conveyor, 840 mm height, hinged chain type • Handling unit with 2-finger gripper for finished parts and remnants • Conveyor belt for finished parts with flap for remnants • Bar feeder: LNS, 1,500 mm Technical Specification Counter spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 81 mm, pomik po osi Z: 80 mm, število osi: 2, Horizontal lathe from the year 2000. This Index ABC features a maximum spindle speed of 5,000 rpm and a bar capacity of 60 mm. It is equipped with an 8-position turret with driven tools that reach up to 6,000 rpm. If you are looking for a high-quality lathe, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle torque (100/40% duty cycle): 95/140 Nm • Bar capacity: max. 60 mm • Turret 1: 8 positions (7 for VDI 25 tools, 1 for synchronised spindle) • Turret 1 driven tools: max. speed 6,000 rpm, power 3.3 kW • Turret 2: 6 positions, X-axis travel 81 mm, Z-axis travel 80 mm • Synchronous spindle: max. speed 4,500 rpm, torque 10 Nm • Coolant tank capacity: 220 liters • Power supply: 400 V, 50 Hz • Housing dimensions: 1,300 mm width x 2,000 mm height • Display: 24 cm color flat-screen • Control version: C200-4 Additional equipment • Bar feeder: INDEX MBL 65/3700 • MBL bar length capacity: 3,000 mm (Ø 5-10) / 3,600 mm (Ø 10-65) • Chip conveyor: Knoll chip conveyor with an ejection height of 840 mm Technical Specification Counter Spindle: Yes Ksdpoyuu N Ijfx Adkolp Driven Tools: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 28.742 h, Funkcionalnost: popolnoma funkcionalen, prehod palice: 65 mm, FANUC Serija 31i-Model A 3 revolverji Transportni trak za dele Magazin Dodatne informacije na zahtevo Kjdpfx Adoydmbuokolp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krmiljenje Siemens SINUMERIK 840D, C200-4D Hitrost vrtenja 6000 1/min Kljdpfx Aoyp Icwedksp Pomiki X/Y/Z 280/280/145 mm Število revolverjev: 1 s 6 mesti Število orodnih mest: 2x4 Transporter za odrezke Transporter za palete Palete

Stanje: rabljeno, Leto izdelave: 1997, Premer struženja 420 mm Dolžina struženja 400 mm Hitrost vretena 5.000 min⁻¹ Pogonska moč 44 kW Premer palice 60 mm Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po dogovoru ogledati pod napetostjo. Kodpfxoylp Awo Adkolp Prikazana oprema, orodja in vpenjalna sredstva so priložena samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Stanje: rabljeno, Leto izdelave: 2023, Tehnične podrobnosti: Premer struženja: 770 mm Premer struženja nad suportom: 650 mm Dolžina struženja: 750 mm Prehod materiala: 82 mm y-os: +/- 60 mm Revolver (x-krat): 12 VDI 40 Hitrost vrtenja: 4.000 min⁻¹ Konjiček: da Kodpsxhd Ufofx Adkelp Skupna priključna moč: 47 kVA Teža stroja pribl.: 7,8 t Dimenzije (DxŠxV) pribl.: 3,3 x 1,9 x 2,3 m Oprema: Glavna moč vretena 16 / 24 kW CNC stružnica, NC konjiček, C-os s ​​zavornim sistemom, Pogonska orodja, moč pogona orodja 10,5 kW, hitrost 5.400 min⁻¹, 3-čeljustna vpenjalna glava SCHUNK ROTA THW 260-81, Transporter za ostružke, Pripravljeno za odsesavanje oljne megle, Izmet obdelovanca (desno), Hladilni sistem 300 l, 8/20 bar, Dodatki (8 pogonskih orodij...), pribl. 3.000 delovnih ur

Leto izdelave: 2005, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 200 mm, pomik po osi Z: 500 mm, model krmilnika: SIEMENS SINUMERIK, skupna masa: 8.000 kg, stružna dolžina: 800 mm, številka stroja/vozila: 500571, Oprema: transportni trak za ostružke, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Z oddajo ponudbe se zavezujete k pravočasnemu prevzemu, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNE PODROBNOSTI Pomik X-os: cca 200 mm Pomik Z-os: cca 500 mm Prehod vretena: cca 100 mm Dolžina struženja: cca 800 mm PODROBNOSTI O STROJU Krmiljenje: SIEMENS SINUMERIK Ksdeynhd Sspfx Adkslp Obratovalna napetost: 400 V Nazivni tok: 80 A Priključek: 47 kW Frekvenca: 50 Hz Dimenzije & teža Dimenzije (D x Š x V): 6.000 x 3.000 x 3.300 mm Teža: 8.000 kg OPREMA Dvojni revolver, vsak z 12-pozicijskim nosilcem orodij Konjiček Glavno vreteno Transporter za ostružke Dva priročnika Filtrirna odsesava znamke BÜCHEL Opomba: Stroj je mogoče prepeljati s standardnim tovornjakom. Zunanja referenca: Pieper - Lot 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 640 mm, pomik osi Y: 210 mm, pomik po osi Z: 2.000 mm, moč vretenovega motorja: 67.000 W, skupna višina: 2.591 mm, skupna širina: 2.199 mm, skupna masa: 21.000 kg, največja dolžina izdelka: 6.300 mm, teža orodja: 5.000 g, kot vrtenja osi B (max.): 360 °, kot vrtenja osi C (maks.): 360 °, število osi: 4, This 4-axis horizontal lathe, the Index G 400, was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight of up to 300 kg. Equipped with a high-speed milling spindle with 6,000 rpm and a main spindle speed of 3,000 rpm, it offers robust machining capabilities. Consider the potential of purchasing this horizontal lathe Index G 400. Contact us for further information. Main spindle 0102 with direct drive Maximum material throughput: 102 mm Maximum speed: 3,000 rpm Front bearing diameter: 170 mm Variable hollow shaft motor Power at main spindle D102: Power at 100/40% duty cycle: 53 kW/68 kW Torque: 675 Nm/900 Nm Work spindle orientation and gear shifting D102 2.5° indexing steps by means of index plate Hydraulically actuated through-hole chuck D102 with analog clamping path monitoring Kljdpfx Aox D D Ecsdkep Material clearance: 102 mm Stroke: 48 mm Maximum clamping force (tension/compression): 10,900 dN Multi-stage clamping pressure device Clamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. To switch to a lower clamping pressure, a chuck release movement is required. Turret 1 (standard equipment) Cross-slide X, Z, turning length 2000 mm, internal coolant supply with shut-off valve, ball screws D=40 mm on the X-axis, D=50 mm on the Z-axis. Axis drives protected by overload couplings, counterweight system for both X and Z axes Travel range (mm): 320 (X) / 2000 (Z) Rapid traverse speed (m/min): 20 (X) / 40 (Z) Feed force (N): 14,000 (X, Z) X-axis measuring system: Glass scale (absolute) Z-axis: ROQ encoder (absolute) X-Y-Z-B Housing (WT1) Turret with AC motor, positioned via spur gear, hydraulically locked Y-axis quill, hydrostatic bearing, lockable via spur gear Ball screw D=40 mm Overload coupling Travel: 220 mm Rapid traverse speed: 12 m/min Feed force: 24,000 N ROQ encoder (absolute) B-axis drive with AC motor Swivel angle: 360° Tool drive unit with two clutches: Maximum speed: 6,000 rpm Power (25% at n=6,000): 17 kW Maximum torque (25%): 37 Nm Disc turret with 12 stations on cross-slide 1 Tool holder system DIN 69880-40x63 Increased repeat accuracy when changing tools due to additional W-grooves Multifunction unit on cross-slide 1 Maximum speed: 6,000/1,500 rpm Gear ratio: i=4 Torques: 36/144 Nm Tools: SK50 Front bearing diameter: 75 mm Internal coolant supply, disc spring clamping Tool carrier 2, right – X, Z Turning length 2000 mm, preferably for sub-spindle machining with internal coolant supply and shut-off valve, turret controlled via AG motor, ball screws D=50 mm for Z-axis, D=40 mm for X-axis. Axis drives protected by overload couplings, counterweight system. Turret head oriented to the right towards sub-spindle.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 39.445 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840C, število osi: 12, This 12-spindle Index MS42C was manufactured in 1998. It offers a maximum bar diameter of 42 mm and operates with a fully automatic system, making it suitable for high-volume precision turned parts. The machine is equipped with a Siemens SINUMERIK 840C control unit and AC servo drives, ensuring efficient performance. Take advantage of this opportunity to purchase the Index MS42C automation system. Contact us for further details. • Maximum bar diameter: 42 mm • Number of spindles: 6 • Spindle pitch circle diameter: approx. 320 mm • Maximum spindle speed: approx. 5,000 rpm • Number of CNC axes: 12 linear axes (6 × X, 6 × Z) • Axis configuration: X/Z per spindle station • Control unit: Siemens SINUMERIK 840C (INDEX OEM integration) • Drive system: AC servo drives with SERCOS interface • Degree of automation: Fully automatic Klodpfeyhf N Esx Adkep • Operation mode: Continuous production (24/7 capable) • Cooling: Central coolant system • Lubrication: Central automatic lubrication • Power supply: 3-phase industrial power • Installed power: approx. 70-75 kW (depending on configuration) • Machine construction: Rigid cast-iron base • Typical materials: Steel, stainless steel, aluminium, brass • Typical applications: High-volume precision turned parts

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 92.000 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret with 12 stations and live tooling on both turret 1 and 2. If you are looking for high-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we are offering for sale. Please contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Coolant flushing of the sub-spindle (electrically actuated shut-off valve) • Foot switch • Turret (12 stations), top and bottom • Live tooling on turret 1 and 2 • "Synchronous tailstock" control function for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection for slides 1 and 2 with solenoid valve • Coolant spray gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Additional Equipment • Gantry unloading device with actuated gripper, NC controlled • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • KNOLL vacuum rotary filter (emulsion version) • High-pressure pump 80 bar Klodpfx Adoylw Dcokjp • Workpiece holding: • Collet chuck for draw tube, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large assortment of driven tool holders and spare parts inventory

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 24.971 h, največja hitrost vretena: 6.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840C, število osi: 12, Ta 12-vretenska večvretenska stružnica Index MS42C je bila izdelana leta 2002. Z največjim premerom palice 42 mm in hitrostjo vretena približno 5.000 min⁻¹ je primerna za visokokakovostna struženja. Razmislite o nakupu te Index MS42C večvretenske stružnice. Kontaktirajte nas za več podrobnosti. • Največji premer palice: 42 mm • Število vreten: 6 • Delitveni krog vretena: pribl. 320 mm • Število CNC osi: 12 linearnih osi (6 × X, 6 × Z) • Konfiguracija osi: X/Z za vsako vretensko postajo Kjdsyhpguepfx Adkolp • Krmiljenje: Siemens SINUMERIK 840C (INDEX OEM) • Pogonski sistem: AC servo pogoni s SERCOS vmesnikom • Stopnja avtomatizacije: popolnoma avtomatsko • Hlajenje: centralni hladilni sistem • Mazalni sistem: centralno avtomatsko mazanje • Nameščena moč: pribl. 70–75 kW • Tipične obdelovanci: jeklo, nerjavno jeklo, aluminij, medenina

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, moč vretenovega motorja: 22.000 W, skupna višina: 2.050 mm, skupna masa: 4.000 kg, proizvajalec krmilnikov: INDEX, model krmilnika: C200-4 / C200-8, This 5-axis turning-milling center Index G200 C was manufactured in 2000. Consider the opportunity to purchase this Index G200 C turning-milling center. Contact us for more information. Additional Equipment • Synchronous device for sub-spindle machining • Tool carrier 3 for synchronized spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning attachment • Non-gripper tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with C-axis • No driven tools Machine Advantages Klsdpfxjyailzj Adkjp Technical Advantages • Space requirement (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel ranges with multi-axis configuration • High precision with 0.001 mm resolution on the numerical control • Versatile expansion options and additional devices for extended functionality Additional Information Movement Cross Slide 1 (upper) - XYZB axes: X-axis: Travel 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Travel 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotary): 360° swivel range, angle steps 5° (with detent), resolution 0.001° (with clamping), indexing time for 180°: 1 s Cross Slide 2 (lower) - XZ axes: X-axis: Travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Travel 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Right Turret: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock center distance: 400 mm Max force: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Fill volume: 70 liters Coolant system: Pump output (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Fill volume: approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal taper / D140 external, optional short taper Sub-spindle: D140 external (only tensile force permitted with collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (with 30 mm bore) / 85 mm (42 mm) / 100 mm (60+65 mm) Max speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar capacity (workpiece diameter): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Max torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Max power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, proizvajalec krmilnikov: SIEMENS, število osi: 3, Ta 3-osni horizontalni stružni stroj Index MC 400 je bil izdelan leta 2008. Idealen je za precizno struženje ter ponuja robustno konstrukcijo in zanesljivo delovanje. Če iščete visokokakovostne funkcije struženja, razmislite o nakupu stroja Index MC 400, ki ga prodajamo. Za več informacij o stroju nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Maksimalni premer struženja: 350 mm • Maksimalna dolžina struženja: pribl. 300 mm • Premer izvrtine skozi vreteno: 66 mm • 14-pozicijski revolver • Pogonska orodja Kjdpfx Adsyar Ifokolp Dodatne informacije Stroj je še vedno priključen na električno omrežje.

Stanje: rabljeno, Description: General: Year of manufacture: 2009 Control: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. Power: 35.5 kW Max. Torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Clamping cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Max. Power: 35.5 kW Max. Torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Kedpfsvxmy Nox Adkjlp Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross-slide Speed: 18,000 rpm Tool holder: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool carrier II: Technology: Milling spindle on cross-slide Speed: 18,000 rpm Tool holder: HSK 40 Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Parts removal: Gantry parts picker Bar feeder interface: Electrically pre-equipped Tool monitoring: Drill breakage control

Stanje: rabljeno, Leto izdelave: 2000, INDEX MS42C Max. Stangendurchmesser: 42 mm Teilkreisdurchmesser der Spindel: 320 mm Hauptspindel: Kraftspanneinrichtung mit INDEX-Federkraft-Hohlspannzylinder und Spannzange Max. Spannhub: 4 mm Betätigungskraft: 26 kN Hauptspindelantrieb: Nennleistung: 5 kW Nenndrehzahl: 1.500 U/min Nenndrehmoment: 32 Nm Max. Drehzahl: 5.000 U/min Synchronspindel und angetriebene Werkzeughalter: Nennleistung: 5,3 kW Nenndrehzahl: 1.500 U/min Nenndrehmoment: 34 Nm Max. Drehzahl: 5.000 U/min Queraggregate: Max. Anzahl: 10 Verfahrweg (X): 70 mm Verfahrweg (Z): 140 mm Max. Vorschubkraft +X: 11,4 kN Max. Vorschubkraft −X: 7,9 kN Max. Vorschubkraft +Z: 11,4 kN Max. Vorschubkraft −Z: 7,9 kN Eilganggeschwindigkeit: 15 m/min Längsspindeln: Stückzahl: 6 Verfahrweg (Z): 240 mm Max. Vorschubkraft +Z: 15,1 kN Max. Vorschubkraft −Z: 11,6 kN Eilganggeschwindigkeit: 15 m/min Längseinheiten-Querschlitten: Max. Anzahl: 6 Verfahrweg (X): 70 mm Max. Vorschubkraft +X: 11,4 kN Max. Vorschubkraft −X: 7,9 kN Eilganggeschwindigkeit: 15 m/min Klsdpfx Ajymc S Uedkjp Synchronspindel: Spannsystem: Federkraftspannzylinder Max. Spann-Ø: 42 mm Futter-Ø außen: 112 mm Backenhub: 1 mm Max. Gesamtklemmkraft: 13 kN Gewicht: ca. 11.000 kg Lieferumfang: Hydraulikaggregat KNOLL KTS 32-48-T Stangenlademagazin CUCCHI PLURIMANDRINO, Baujahr 2000 Werkstattschrank mit Maschinenzubehör KNOLL VRF 500 Späneförderer KNOLL 400 S-1/250

Stanje: rabljeno, Leto izdelave: 2013, INDEX ABC 65 Abstand zwischen Haupt- und Gegenspindel: ca. 250 mm Kedpfoymbp Ssx Adkjlp Hauptspindel: Spindelbohrung: 65 mm Max. Drehzahl: 6.000 min⁻¹ Antriebsleistung: 25 / 35 kW bei 80 / 120 Nm Futterdurchmesser: 160 mm Lager ISO 702/1, Durchmesser: 140 mm C-Achse vorhanden Obere Werkzeugrevolver: 10 Stationen Max. Drehzahl: 12.000 min⁻¹ Antriebsleistung: 7,5 kW bei 11,25 Nm Verfahrwege X / Y / Z: 140 / ±50 / 300 mm Eilgang X / Y: 30 / 50 m/min Untere Werkzeugrevolver: 9 Stationen Max. Drehzahl: 12.000 min⁻¹ Antriebsleistung: 9 kW bei 10 Nm Verfahrwege X / Y / Z: 140 / ±50 / 300 mm Eilgang X / Y: 30 / 50 m/min Gegenspindel: Spindelbohrung: 52 mm Max. Drehzahl: 6.000 min⁻¹ Antriebsleistung: 5 / 9 kW bei 10,5 / 20 Nm Futterdurchmesser: 110 mm Verfahrwege X / Y: 140 / 300 mm Rückseitenbearbeitungseinheit: 8 Einheiten inkl. 5 angetriebener Stationen Max. Drehzahl: 12.000 min⁻¹ Antriebsleistung: 6,4 kW bei 7 Nm Werkstück- und Abschnitts-Handhabungseinheit mit Greifer: Verfahrweg X ca. 1.580 mm Geschwindigkeit ca. 68 m/min Schwenkwinkel ca. 33° Max. Durchmesser 65 mm Max. Gewicht 2 kg CNC-Steuerung: INDEX C 200-4D (basiert auf Siemens Sinumerik 840 D-sl) Abmessungen: ca. 4,1 x 2,1 m Platzbedarf inkl. Stangenlademagazin und Kühlmittel-/Filtereinheit: ca. L x B x H ca. 11 x 1,5 x 2 m Gewicht: ca. 7 t Spannung: 400 V / 50 Hz Betriebsstunden: 30.431 h Hydraulikstunden: 28.806 h Lieferumfang: Stangenlader INDEX MBL Kühlschmierstofffilteranlage KNOLL KF 150 Späneförderer KNOLL 320 S-1/160

Stanje: rabljeno, Leto izdelave: 2014, INDEX ABC 65 Abstand zwischen Haupt- und Gegenspindel: ca. 250 mm Hauptspindel: Spindelbohrung: 65 mm Max. Drehzahl: 6.000 min⁻¹ Antriebsleistung: 25 / 35 kW bei 80 / 120 Nm Futterdurchmesser: 160 mm Lager ISO 702/1, Durchmesser 140 mm C-Achse Obere Werkzeugrevolver: 10 Stationen Max. Drehzahl: 12.000 min⁻¹ Antriebsleistung: 7,5 kW bei 11,25 Nm Verfahrwege X / Y / Z: 140 / ±50 / 300 mm Eilgang X / Y: 30 / 50 m/min Kljdpfjymblajx Adkjp Untere Werkzeugrevolver: 9 Stationen Max. Drehzahl: 12.000 min⁻¹ Antriebsleistung: 9 kW bei 10 Nm Verfahrwege X / Y / Z: 140 / ±50 / 300 mm Eilgang X / Y: 30 / 50 m/min Gegenspindel: Spindelbohrung: 52 mm Max. Drehzahl: 6.000 min⁻¹ Antriebsleistung: 5 / 9 kW bei 10,5 / 20 Nm Futterdurchmesser: 110 mm Verfahrwege X / Y: 140 / 300 mm Rückseitenbearbeitungseinheiten: 8 Einheiten, davon 5 angetriebene Stationen Max. Drehzahl: 12.000 min⁻¹ Antriebsleistung: 6,4 kW bei 7 Nm Werkstück- und Reststück-Handlingeinheit mit Greifer: Verfahrweg X ca. 1.580 mm Geschwindigkeit ca. 68 m/min Schwenkwinkel ca. 33° Max. Werkstückdurchmesser: 65 mm Max. Werkstückgewicht: 2 kg CNC-Steuerung: INDEX C 200-4D (basierend auf Siemens Sinumerik 840 D-sl) Abmessungen: ca. 4,1 x 2,1 m Platzbedarf inkl. Stangenlader und Kühlmittel-/Filtereinheit: ca. L x B x H ca. 11 x 1,5 x 2 m Gewicht: ca. 7 t Spannung: 400 V / 50 Hz Betriebsstunden: 18.384 h Hydraulikstunden: 16.694 h Lieferumfang: Stangenlader INDEX MBL Kühlmittel-Filtereinheit KNOLL KF 150 Späneförderer KNOLL 320 S-1/160 Zusatzkühlgerät KLH SC 8.K2L.MT-00-IND

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 26.721 h, število vreten: 6, največja hitrost vretena: 10.000 obr/min, Premer palice (maks.): 22 mm, skupna širina: 1.800 mm, skupna dolžina: 3.200 mm, skupna višina: 2.850 mm, potovalna razdalja osi X: 62 mm, pomik osi Y: 12 mm, pomik po osi Z: 85 mm, skupna masa: 6.500 kg, Arbeitsspindeln: Anzahl: 6 Max. Stangendurchmesser: 22 mm Spindelteilungskreisdurchmesser: 230 mm Verfahrwege X / Z: 62 / 85 mm Eilgang: 15 m/min Synchrone Hohlspindelantriebe: Anzahl: 6 Max. Drehzahl: 10.000 min⁻¹ Nenndrehzahl: 8.300 min⁻¹ Leistung: 15 kW bei 18 Nm Futterdurchmesser: 110 mm Schwenkbare Synchronspindeln: Anzahl: 2 Verfahrweg Z: 120 mm Vorschubkraft: 2,5 kN Eilgang: 15 m/min Schwenkwinkel: 132° Gegenspindel: Max. Drehzahl: 10.000 min⁻¹ Nenndrehzahl: 8.000 min⁻¹ Kodpfx Adjymaw Iekslp Leistung: 9,2 / 12 / 14 kW bei 11 Nm Werkzeugträger: Max. Anzahl: 11 Verfahrwege X / Y / Z: 62 / ±12 / 85 mm CNC-Steuerung: C 200-4D (Siemens Sinumerik 840D) Abmessungen: ca. L x B x H ca. 3,2 x 1,8 x 2,85 m Gewicht: ca. 6,5 t Betriebsstunden: 61.997 h Arbeitsstunden: 42.235 h Lieferumfang: INDEX-Stangenlader Stangenlader IEMCA SIR MS22 P, Baujahr 2008 Kühlmitteleinheit mit Bandfilter Späneförderer KNOLL 400 S-1/290 Kühlmittelfiltereinheit KNOLL FKA/1780 RSF 100 Werkstattschrank mit Maschinenzubehör

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 26.721 h, število vreten: 6, največja hitrost vretena: 10.000 obr/min, Premer palice (maks.): 22 mm, skupna širina: 1.800 mm, skupna dolžina: 3.200 mm, skupna višina: 2.850 mm, potovalna razdalja osi X: 62 mm, pomik osi Y: 12 mm, pomik po osi Z: 85 mm, skupna masa: 6.500 kg, Število orodnih postaj v orodnem revolverju: 3: 11, INDEX MS 22C Delovna vretena: Količina: 6 Največji premer palice: 22 mm Premer delitvenega kroga vretena: 230 mm Hodi X / Z: 62 / 85 mm Klsdsyl U Npepfx Adksp Hitri pomik: 15 m/min Sinhroni votli vreteni pogoni: Količina: 6 Največje število vrtljajev: 10.000 min⁻¹ Nazivno število vrtljajev: 8.300 min⁻¹ Moč: 15 kW pri 18 Nm Premer vpenjalne glave: 110 mm Zasukljiva sinhrona vretena: Količina: 2 Hod Z: 120 mm Podajalna sila: 2,5 kN Hitri pomik: 15 m/min Zasukni kot: 132° Kontraveretno vreteno: Največje število vrtljajev: 10.000 min⁻¹ Nazivno število vrtljajev: 8.000 min⁻¹ Moč: 9,2 / 12 / 14 kW pri 11 Nm Nosilci orodij: Največja količina: 11 Hodi X / Y / Z: 62 / ±12 / 85 mm CNC krmiljenje: C 200-4D (Siemens Sinumerik 840D) Dimenzije: pribl. D x Š x V cca 3,2 x 1,8 x 2,85 m Teža: pribl. 6,5 t Obratovalne ure: 26.721 h Delovne ure: 20.859 h Obseg dobave: INDEX podajalnik palic Hladilna enota s tračnim filtrom

Stanje: rabljeno, Leto izdelave: 1996, Tip: Večvreten stružnica Klsdpfx Adeyn Hmxjksp Proizvajalec: Index Model: G200 Leto izdelave: 1996 Stanje: Rabljeno Količina: 1

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 8208124, poteza s peresom: 100 mm, model krmilnika: INDEX S3T B, premer vretena: 103 mm, premer puše konjička: 100 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 08.04.26 in 16.04.26! TEHNIČNI PODATKI Kedsyk E Sxspfx Adkjlp Premer delovne vretene: 103 mm Premer pinole konjička: 100 mm Hod pinole: 100 mm Število mest v revolverski glavi: 16 Revolverska glava: EFG 250 PODROBNOSTI O STROJU Krmiljenje: INDEX S3T B Obratovalna napetost: 380 V Frekvenca: 50 Hz Napetost krmiljenja: 220 V Nazivni tok: 100 A Dimenzije & masa D x Š x V: 3500 x 2400 x 2600 mm Masa stroja: 3 t

Stanje: rabljeno, Leto izdelave: 2008, Iz proizvodnje ventilov Klodpeynkgvjfx Adksp

Stanje: rabljeno, Leto izdelave: 1969, Revolverski avtomatski stroj Proizvajalec: INDEX Tip: B60 Letnik izdelave: 1969 Kjdpfx Adjylht Ujkelp z: 8-luknjastim revolverjem Naprava za zaustavitev vretena Naprava za rezanje navojev Naprava za izmet obdelovanca Dovod materiala

Stanje: rabljeno, Leto izdelave: 2001, Maximum swing diameter: 450 mm Chuck diameter: 400 mm Control: Siemens 840D (Index) Max. spindle speed: 4,200 rpm Drive power - main spindle: (35.5 / 56) kW Max. torque: (340 / 550) Nm C-axis: 0.001° Number of tool stations: 2x 12 positions Driven tool stations: 2x 12 positions Kedeyq Sk Iopfx Adkjlp Tool system: VDI 30 Max. speed of driven tools: 6,000 rpm Drive power - driven tools: 9.5 kW Max. torque 40%: 19 Nm Y-axis travel: +/- 90 mm B-axis: +270° / -90° X-axis travel: 730 mm Z-axis travel: 340 mm Y-axis travel: +/- 90 mm B-axis: +270° / -90° Rapid traverse X: 40 m/min / Z: 30 m/min Number of pallets: 24 positions Pallet size: 410 x 300 mm Max. workpiece diameter: 300 mm Max. workpiece weight incl. pallet: 25 kg Chain width: 75 mm Belt speed: 7.5 m/min Total power requirement: 56 kW Machine weight: approx. 9.0 t Space requirement: approx. 8.5 x 6.0 x 2.7 m CNC vertical lathe INDEX - V 300 Y/B - incl. 24-position pallet circulation system by Schnaithmann - incl. ball screw spindle as spare part - incl. 39x driven tools - incl. 39x tool holders

Stanje: rabljeno, Leto izdelave: 2003, Tehnične podrobnosti: Premer struženja: 270 mm Dolžina struženja: 710 mm Teža stroja pribl.: 6,5 t Maks. premer obratovanja: 590 mm Klodjx Dlhlopfx Adkop Z avtomatskim sistemom za nalaganje in razlaganje, transporter za ostružke. G300 z "prehodom skozi vreteno/čeljustnim vpenjalom 90 mm" v izvedbi s konjičkom. Stroj nima gnanih orodij. Podatek v vezalni shemi se nanaša na pogon za indeksiranje revolverja, ne na gnana orodja.