Illig Sb 74 nakup rabljenega (37)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, obratovalne ure: 41.685 h, Technical data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Kwsdpjq A Um Rjfx Abbet Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. draw depth (negative), mm: 100 Cycles/min (min.-max.): 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Discharged thermal energy: With top heating approx.: 10,260 KJ/h With top and bottom heating approx.: 17,715 KJ/h Special equipment: Hollow floor device available Control cabinet: included

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 589-0263, Proizvajalec: Illig Kjdpfeuzi I Esx Abbswt Model: VHW 60/2 Leto: 2001 Stanje: Dobro Število grelnih valjev: 2 Največja širina materiala: 610 mm Največja debelina materiala: 1,8 mm Najvišja temperatura grelnih valjev: 140 °C Ovitje materiala: 563° Skupna priključna moč: 36,0 kW Dimenzije: 2300 x 1400 x 2400 mm (D x Š x V), teža: 300 kg Vse informacije so informativne in se lahko spremenijo. Vsa oprema je na voljo do prodaje oziroma predhodne prodaje.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 29.750 h, Postaje: Oblikovanje, rezanje in zlaganje Največje območje oblikovanja: 500 x 350 mm Najmanjše območje oblikovanja: 300 x 160 mm Širina folije: 540 mm Višina oblikovanja nad/pod nivojem materiala: 100 / 40 mm Največja zapiralna sila orodja: 55 kN Tlačni tlak: 2 bara Ciklov/min: 40 Skupna moč motorja: 32 kW Skupna grelna moč: 44,9 kW Nazivni tok: 115 A Kwodpfx Absw Rp Eisbot Dimenzije (D x Š x V): 8,3 x 2,3 x 2,5 m

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1506, širina folije: 1.000 mm, vrsta vhodnega toka: trifazni, pritisk: 6 letvica, skupna širina: 700 mm, skupna dolžina: 1.000 mm, skupna višina: 350 mm, vhodna napetost: 400 V, najv. debelina pločevine: 10 mm, ogrevalna zmogljivost: 30 kW (40,79 KM), skupna masa: 1.500 kg, višina orodja: 490 mm, Tip stroja: ILLIG UA 100 G Številka stroja: 1506 Leto izdelave: 1988 Skupna teža: pribl. 1,5 t Napajanje: 3x400V Skupna poraba energije: 35 kWh Kwodowfdd Djpfx Abbet Skupna moč ogrevanja (zgoraj in spodaj): 30 kWh Tip grelne plošče: keramična Največja velikost plošče: 1000x700 mm Najmanjša velikost plošče: 310x210 mm Največja debelina plošče (ročno nalaganje): 12 mm Največja površina oblikovanja: 960x660 mm Najmanjša površina oblikovanja: 270x170 mm Višina pozitivno oblikovanega izdelka: 350 mm Višina negativno oblikovanega izdelka: 350 mm Največja višina orodja: 490 mm Stroj je bil približno leta 2020 obnovljen. Vgrajen je bil nov krmilni sistem Omron, ki je zamenjal originalni Schleicher, prav tako pa smo obnovili ožičenje in električno omarico.

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 45.350 h, številka stroja/vozila: 1537, Hybrid machine capable of thermoforming sheets or rolls. Machine equipped with a BE-type sheet loader without preheating. Equipped with a PR-type roll unwinder. Fitted with both upper and lower tables. Controlled by a Schleicher PDPF controller. Quick clamping system for reduction frames and tooling. Maximum width: 700 mm. Maximum sheet size: 1000 x 700 mm. Maximum sheet thickness: 10 mm. Kwsdpfx Abetv Ivzobet We will handle disassembly and loading onto your truck, which you must make available for collection.

Stanje: dober (rabljeno), Leto izdelave: 1990, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1531, širina folije: 700 mm, vrsta vhodnega toka: Klimatska naprava, skupna širina: 700 mm, skupna dolžina: 3.500 mm, skupna višina: 3.500 mm, vhodna napetost: 400 V, moč vakuumske črpalke: 3.000 W, priključek za stisnjen zrak: 6 letvica, delovna širina: 700 mm, zmogljivost črpalke: 100 l/min, minimalna višina orodja: 300 mm, širina krmilne omare: 1.000 mm, obratovalna temperatura: 650 °C, UA 100 1 g thermoforming machine, year 1990, in good working condition. Maximum sheet dimensions: 1000x700x10 mm Upper heating: 3 pilot emitters, lower heating: 1 pilot emitter Counter-mould height with motorized adjustment Quick clamping system for upper and lower frames Kwodpfet Iracex Abbet Quick clamping of tooling on the lower table Quick clamping of tooling on the upper table Film sag control (lower film) Bubble forming with photoelectric cell Adjustable and memorisable bubble intensity and demoulding (cascaded pneumatic valves) BUSCH vacuum pump 100 m³/h Machine has been stopped and stored after being replaced by a new ILLIG UA 4 g automatic machine Price is for the machine disassembled and loaded onto your truck It can be restarted for demonstration if you wish to inspect it

Stanje: skoraj kot novo (rabljeno), Machine type: 70K Brand: Ill Kwedpfoh Ey D Nex Abbet Model: Moulds PP 21 CAV DM75 Cup diameter: 75 mm

Stanje: skoraj kot novo (rabljeno), Machine type: 70K Brand: Ill Model: Moulds PP 21 CAV DM70 Kwjdpfxoh Ey Euj Abbst Cup diameter: 70 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, obratovalne ure: 45.353 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1537, višina izdelka (maks.): 10 mm, dolžina plošče: 1.000 mm, širina plošče: 700 mm, Hybrid machine for thermoforming sheets or coils TECHNICAL DETAILS Maximum width: 700 mm Maximum plate size: 1,000 x 700 mm Maximum sheet thickness: 10 mm Heating capacity: 31.1 kW Motor power: 5.59 kW EQUIPMENT - Plate loader type BE without preheating Kodpfx Aowr Abzobbewt - Coil unwind unit type PR - Upper and lower table - Schleicher PDPF control director - Quick clamping of reduction frames and tools

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1531, obratovalna temperatura: 650 °C, dolžina plošče: 1.000 mm, širina plošče: 700 mm, TECHNICAL DETAILS Film width: 700 mm Input current type: Alternating current (AC) Input voltage: 400 V Sheet thickness: 10 mm Sheet dimensions: 1,000 x 700 mm Operating temperature: 650 °C Pump capacity: 100 l/min Vacuum pump power: 3,000 W Compressed air connection: 6 bar Forming height (min.): 300 mm MACHINE DETAILS Total width: 700 mm Total length: 3,500 mm Total height: 3,500 mm Control cabinet width: 1,000 mm Kjdpfxjwr Ab Ue Abbswt EQUIPMENT - Top heater with 3 pilot burners, bottom heater with 1 pilot burner - Counter mold height adjustable by motor - Quick clamping of upper and lower frames - Quick clamping of tools on the lower table - Quick clamping of tools on the upper table - Control of sagging of the bottom film - Bubble formation via electric photo cell - Programmable bubble and demolding intensity, pneumatic valves in cascade - BUSCH vacuum pump 100 m³/h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1594, TECHNICAL DETAILS Machine number: 1594 Year of manufacture: 1993 Voltage: 3~220 V, 50 Hz Motor power: 3.52 kW Heating capacity: 216.0 kW Rated operating current: 86.5 A Permissible air pressure: 10 bar Kodpfxsww Igyo Abbswt

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 191, vrsta vhodnega toka: trifazni, pritisk: 10 letvica, skupna širina: 3.050 mm, skupna dolžina: 2.400 mm, skupna višina: 3.480 mm, širina krmilne omare: 850 mm, višina krmilne omare: 1.800 mm, dolžina elektro omare: 600 mm, This machine was overhauled, installed at a customer site, and commissioned in 2020, but has seen little to no use. The machine is in excellent condition. It has been professionally disconnected and transported. Kwodpfxowpfrkj Abbot

Stanje: rabljeno, Funkcionalnost: nepreverjeno, For sale here is an Illig SB 74 D, suitable for skin packaging, blister packaging is not possible. Kjdpowpvbpjfx Abbjwt Technical data available upon request.

Stanje: delavnici obnovljeno (rabljeno), Skin packaging machine and blister machine with longitudinal and cross cutters, Euro hole punching. Kjdpfxsfua S Se Abbjwt Completely overhauled and newly painted SB 74c-10 with strip steel punching tool and residual material rewinder. New conveyor belt. Format: 770 x 505 mm. Available on request also as c-9 or with upper die.

Stanje: delavnici obnovljeno (rabljeno), Completely overhauled and newly painted. Ksdpfxefua H Ao Abbewt

Stanje: delavnici obnovljeno (rabljeno), Top heating with pilot burner control Individual radiators of the top heating 2 cooling fans D05 Pre-blow and demoulding automation Documentation and plans in German Max. forming area 1210 x 500 Longitudinal and cross cutting device with 6 quick-change crush knives Ksdpfjfua Husx Abbowt Euro hole punching unit (retrofit available at extra cost) Completely overhauled

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Znamka Illig Model RV 74 Leto 1999 Ure Približno TBC Dobava Takoj Postaje Oblikovanje, rezanje in zlaganje Največje območje oblikovanja 700 x 500 mm Najmanjše območje oblikovanja 400 x 250 mm Globina vleka zgoraj/spodaj 120 / 40 mm Največja debelina materiala 2,0 mm Največja delovna hitrost 20 / min Skupna teža 6.600 kg Kedpfsxp H Nujx Abbowt Vsi podatki so predmet sprememb in/ali napak. Vsa oprema je na voljo do razprodaje.

Stanje: rabljeno, Leto izdelave: 1990, Oznaka stroja: Rabljeni stroj za pakiranje (termoformirna linija) Proizvajalec: Adolf Illig Tip: SB 53C - DIN Leto izdelave: 1990 Pogon motorja: 1,24 kW Kodoxm Sa Hjpfx Abbswt Dimenzije: D 1.600 x Š 1.135 x V 2.710 mm Lastna teža: 500 kg Tehnična dokumentacija: Da Opomba: Ogrevalna moč: 4,5 kW (15 keramičnih ploščatih grelcev) Vakuumska enota: največja stopnja vakuuma 0,95 kp/cm² Formati: Oblikovalna površina: 405×500 mm Velikost kartona: 400×495 mm Širina folije: 445 mm Pozitivna globina vleka: 150 mm Negativna globina vleka: 150 mm Višina pakiranja: 150 mm Premer folijskega valja (blister): 400 mm Premer folijskega valja (skin): 350 mm Notranji premer valja: 70 mm Stanje: Rabljeno Cena: Na zahtevo

Leto izdelave: 2006, Stanje: dober (rabljeno), Illig SK 74-C from a sheltered workshop Kwsdpfx Asr Nv E Nebbet Year of manufacture: 2006 Serial no.: 426-0172 Includes: 2 pallets with approx. 38 rolls of film Dimensions (approx. in mm): 2200 x 1600 x 1600

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever Kodpfx Aswf Dvaebbswt - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Stanje: delavnici obnovljeno (rabljeno), Sheet size: 1000 x 1500 mm Kwsdpfxewf D R Rs Abbet Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like more details or a quote, please feel free to contact us.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Kedowf Ebwspfx Abbowt Draw depth: 600 mm If you would like more details or a quotation, please feel free to contact us.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, širina folije: 1.500 mm, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum draw depth: 700 mm - Maximum material thickness: 12 mm Features: Forming station - Siemens S7 control system - Fully automatic setup function - Top heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Bottom heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Contactless emitter control (solid state relay) - Synchronous upper platen system (hydraulic adjustment) - Clamping frame (hydraulic adjustment) - Tooling table (hydraulic adjustment) - Central cooling via fresh air supply - Triple film sag detection with automatic air support function - Triple tool monitoring - Automatic air box evacuation Kwedpjft S Eaofx Abbet - Quick-change system for mold, clamping frame, and pre-stretch plug, with fully and semi-automatic sequence - Mold tool extendable on front flap - Forming vacuum monitoring - Pre-blow automation via pre-blow time - Automatic basic setting with self-optimization of emitter temperatures - Heating, cooling, and cycle times - Cycle time calculation for all expansion stages - Position measuring system for table location - Clamping frame, upper platen, and tool temperature control - Storage of programs and heating settings - Lower clamping frame for frame installation from below, central clamping via electric motor - Cascade for vacuum, pre-blow, demolding, tooling table, upper platen - Adjustable speeds for tooling table, upper platen, and clamping frame - Pneumatically lockable front door - Main switch cabinet climate control Automatic sheet and roll feeding - Film unwind stand including loading aid and pneumatic brake - Automatic sheet magazine centering (motorized adjustment) - Top heating usable as preheating or final heating (motorized travel) - Bottom heating usable as preheating or final heating (motorized travel) - Motorized sheet lifter - Vacuum pump for textured material - Material transport via transport chain and roller rail for improved handling, even with thin materials Options available on request.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Tehnični podatki: • 4-postajna rotacijska miza • Največja zvarilna površina: 350 x 250 mm • Največja globina blistra: 70–100 mm glede na vrsto izdelka • Sila varjenja: 12.800 N • Moč grelca za varjenje: 1,75 kW • Podajalec kartonske embalaže • Izmetalec embalaže Kedpsfua Dcofx Abbjwt • Enota za oblikovanje kartona • Kabel s CEE 16A vtikačem • Teža cca 750 kg Stroj je na voljo v vseh izvedbah: b, b-2, b-3, b-4.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ILLIG univerzalni termoformirni stroj tip UA 155 4g solo Tehnični podatki - Siemens upravljanje - Največja velikost materiala: 1500 x 1250 mm - Največja površina oblikovanja: 1450 x 1200 mm - Največja višina orodja: 700 mm - Največja debelina materiala: 12 mm - Ogrevalna moč: 96 kW - Skupna moč: 105 kW - Električni varovalni tok: 160 A - Zmogljivost vakuumske črpalke: 250 m³/h - Potreba po stisnjenem zraku: 6 bar Oprema - Gornje gretje s 5-conskim HTS krmiljenjem (700ºC) - Spodnje gretje s 5-conskim HTS krmiljenjem (500ºC) - Hladilni ventilator D06 - Miza kaskada - Vakuumska kaskada Kedsxlzqfjpfx Abbewt - Zgornji bat - Vključno z ILLIG hladilno enoto in ILLIG temperirno enoto