Ikz I nakup rabljenega (6.908)

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Tjdpfjihb Amex Abgof Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: rabljeno, številka stroja/vozila: 006619, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 2: Dvo-kotni profilirni stroj – samostojni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Tedpfx Asqy Em Nsbgjf Pozicija 4: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 5: Transfer IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 6: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 7: Obratnik plošč IMA + MEINERT-COMBIMA/I/R75/2050 Pozicija 8: Razkladalec IMA + MEINERT-COMBIMA/I/R75/2050

Stanje: rabljeno, Leto izdelave: 1980, Premer čelne plošče: 2000 mm Stružni premer nad čelno ploščo: 2200 mm Pomik - x: 1700 mm Pomik - z: 400 (+550) mm Območje vrtljajev čelne plošče – brezstopenjsko: 0,28–160 min⁻¹ Višina konice nad ploščo: 1140 mm Premer glavne vretena: 285 mm Premer odprtine vretena: 100 mm Krmiljenje: S 840 D Največja teža obdelovanca: 5000 kg Navor na čelni plošči: 25000 Nm Skupna potrebna moč: 75 kW Teža stroja pribl.: 21 t Prostorske zahteve pribl.: 6 x 3,5 x 3 m Stroj je bil leta 2015 generalno obnovljen in predelan na Siemens 840 D CNC krmilje. Originalno leto izdelave je bilo 1980. Tedpfoxuknrox Abgsf

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm Veneer edging possible up to max. 1.0 mm (restricted) Panel thickness (min/max): 8 / 60 mm ICOS Open control unit Feed speed m/min (adjustable): 6 - 30 Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Tsdpfxoxp E R Ds Abgof Adjustable fence, CNC controlled – Panel infeed system 63.152 (500 x 500 mm) Jointing unit with CNC control 08.379 (4.0 kW x 2) – Edge pressure zone (CNC controlled) Gluing section (P.U.R. adhesive + pre-melter) VTG + 283.203 Edge magazine for rolls (No. 1 + 6 compartments) Pre-milling unit 08.055.0.1680 (1.85 kW x 1) End trimming unit 08.42/30/B (0.66 kW x 2) 20 + 30 m/min (0°-25°) Milling unit 08.0587 (1.0 kW x 2) multi-profile – (1 + 3 profiles) Sprayer units (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled – KFA 20 (0.18 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-2 (0.18 kW x 2) Standard milling unit for grooving/rebating 08.190 (4.5 kW x 1) 90°/180°/270° (CNC controlled)

Stanje: rabljeno, Technical details: Pressure: 250 t Stroke: Continuous idle 40 mm Ram stroke: adjustable 36 - 126 mm Ram adjustability: 110 mm Ram clamping area: 630 x 500 mm (L x W) Clamping surface: 1000 x 750 x 100 mm Distance table / ram: 400-526 mm Passage opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Control cabinet dimensions (L x W x H): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (L x W x H): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator stand Tedpfx Aju N Ddwjbgef Accessories: - Base plate 2200 x 1500 x 40 mm

Stanje: dober (rabljeno), Tehnični podatki za paletno regalno prečko: Regalni sistem: Dexion (Hovik) Tip: P 90 V obsegu dobave: 01x paletna prečka, rabljena Tedew R N Hyspfx Abgjf Barva materiala: bela I-profil: 100 x 50 mm Viseča kljuka: 5 HK Prosta širina: 1.800 mm 02x varnostni zatič, rabljen Izvedba: sendzimir pocinkano Za varovanje vzdolžnih nosilcev Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo le za osebni prevzem. Če želite prevoz ali pošiljanje tega izdelka, to pomeni dodatne stroške, ki jih je mogoče posebej preveriti pri nas glede na kraj dostave oziroma obseg dobave.

Stanje: pripravljen za uporabo (rabljen), The robot is used for precise or arbitrary dispensing of pastes or liquids. Todehx Nh Ropfx Abgef

Stanje: rabljeno, številka stroja/vozila: 007857, Pozicija 1: Horizontalno skladišče IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 2: Krožna žaga za plošče z avtomatskim skladiščem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 3: Enostranski robni lepilni stroj IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 4: Nakladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 5: Razkladalec IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 6: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 7: Obdelovalni center z robnim lepljenjem IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Pozicija 8: Stroji za rezanje kartona IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3 Tsdpfx Aewuuf Djbgof Pozicija 9: Stroji za povezovanje IMA + MEINERT-COMBIMA SYSTEM/I/R75/1170/F/R3

Leto izdelave: 1970, Stanje: pripravljen za uporabo (rabljen), Premer kolesa: 160 mm, največja širina kolesa: 355 mm, modulno območje: 0,5-4,5, največji premer rezkarja: 115 mm, največja dolžina rezkarja: 105 mm, območje zasuka rezkalne glave: 120°, hitrost: 400 vrt/min, razdalja med konicami: 410 mm. Dimenzije stroja X/Y/Z: pribl. 2000 mm/1500 mm/2000 mm, teža: pribl. 3500 kg. Ogled na lokaciji je možen. Tsdexph Skopfx Abgef

Stanje: rabljeno, Chiller Riedel -Tip: PC 1001.1ME5.I -Hladilna zmogljivost: pribl. 94 kW -Tip kompresorja: SZ160T4RC (x2) Tsdpfxoxcw U Io Abgof -Zunanje dimenzije: 2900 x 1150 x 2050 mm -Število ventilatorjev: 4 x 500 mm -Napajanje: 400 V, 50 Hz, 3 faze -Skladiščno stanje: 1 kos -Stanje: rabljeno, zelo dobro

Stanje: dober (rabljeno), DC motor, servo motor, gear motor, electric motor, DC gear motor, DC shunt gear motor - Manufacturer: Kählig, DC gear motor - Model: M63x22/I+SN31+IGMi12/2 - Voltage: 24 V - Torque: 108 N/cm - Speed: 340 rpm - Technical data: see type plate photo - Shaft: Ø 10 x 28 mm - Quantity: 4 units available - Price: per item - Dimensions: 170/100/H100 mm Tsdstr R A Eepfx Abgof - Weight: 2.0 kg/unit

Stanje: dober (rabljeno), Tehnične podatke o prečki za paletni regal: Regalni sistem: Dexion (Hovik) Tip: P 90 V obsegu dobave je: 01x Prečka za paletni regal, rabljena Barva materiala: bela I-profil: 100 x 50 mm Agrafa: 5 HK Svetla širina: 950 mm 02x Varnostni zatič, rabljen Izvedba: sendzimir pocinkan Za varovanje prečnih nosilcev Vaši kontaktni partnerji pri nas: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Todpfx Asw R Shasbgjf Ta izdelek je na voljo samo za osebni prevzem. Če želite prevoz ali pošiljanje tega izdelka, to povzroča dodatne stroške, ki jih lahko pri nas preverite glede na kraj dostave oziroma obseg dobave.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, General parameters: Machine type: Edge banding machine Model: Novimat Compact R3/L12 Year of manufacture: 2021 Manufacturer: IMA Schelling Group Total machine length: 7 m Purpose: Industrial edge processing with high precision Key features: - Automation of basic functions enables easy operation by a single person - Robust frame construction ensures high stability - Electronically adjustable upper pressure guide - Dual-belt pressure conveyor for secure feeding of short workpieces - IMA quick-change glue system - Programmable feed speed control Tsdpov D Rhujfx Abgjf - Multi-profile technology capability with automatic profile change - 21.5" industrial PC touch control Technical specifications: Workpiece thickness: 8–60 mm Minimum workpiece length: 150 mm Minimum workpiece width: 65 mm Maximum edge band height: 65 mm Edge types: Paper, plastic, veneer (with optional protective coating) Edge band thickness: 0.3–3 mm Working speed: 20 m/min Machine equipment: - Pre-milling unit with diamond tooling - End trimming unit with automatic tilt adjustment (15°) - Milling and copying units with automatic adjustment - Edgebanding system with PUR glue option - Top and bottom spray system for cleaning and maintenance of workpieces - Corner rounding and polishing units for final edge finishing - ICOS open control system with touch display

Stanje: rabljeno, številka stroja/vozila: 006089, Type of applied edging: thin edge, thick edge, solid wood Gluing system: EVA Jointing milling: yes Multifunctional unit: yes Max. feed speed: 30 m/min Maximum panel thickness: 60 mm Working units: 8 pcs Tedpfx Aboim S Hqogef

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Tjdpfx Abscr T N Degef Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Stanje: rabljeno, Leto izdelave: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine No.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application station: 04.0832 Bonding unit: 04.1570 PU pre-melter: 283.203 High-speed tool holder: For high-speed motors Cut-off unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping blade device: 08.516 Flat scraper: 08.517 Corner copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety features: Light barriers, temperature controller, control terminal Additional equipment: Upstream roller conveyor table Total machine length: approx. 11/16 m Extraction system: Included Accessories: Edge magazines: 2 sliding magazines for edge rolls, each holding 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Control cabinet Panel return system (Manufacturer: VENJAKOB): Tedpfx Ajrnkw Dobgef Components: 7 belt conveyor tables, belt width approx. 100 cm, varying table lengths Round belt conveyor table Control cabinet system 2 angle transfer tables Peripheral equipment for edge processing line: Consisting of: Interface system Barcode scanning system

Stanje: rabljeno, številka stroja/vozila: 005657, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: PUR Spojno rezkanje: da Multifunkcijska enota: da Zgornja rezkalna enota: da Maks. podajalna hitrost: 30 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 13 št. Tsdowcx Tuspfx Abgef

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control unit: ICOS Open Feed speed m/min (adjustable): 16 - 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled Jointing unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) VTG + 283.203 Edge magazine for rolls (number of compartments): 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2), 4 profiles Multifunctional unit (radius and contour milling) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kw 4.5 x 1) 90°/180°/270° CNC Toded Scydjpfx Abgsf

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Tedpjgbug Nefx Abgjf Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Tsdpfjidqphox Abgjf Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Veneer edges possible in a limited way up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control/software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorized timing belt Spraying device (for liquid anti-stick) Adjustable fence Jointing cutter unit - 08.378 (2 x 4.5 kW) Gluing unit (Hot Melt glue) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour trimming unit) 08.342 CNC controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Todpfx Aber Ttflogsf Universal milling unit for grooving/rebating and profiling 08.190 (1 x 4.5 kW)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Tsdpfx Abji Hn Srjgof Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Tsdpfxokt Uuae Abgjf Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Todpfoltmnlox Abgjf Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Tjdpfoifnzdox Abgsf Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)