Asahi Okuma nakup rabljenega (230)

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M08L/8356, Ponudbena številka: M08L/8356 Vrsta stroja: 4-matrična - 4-udarna stiskalnica Informacije: zaprt nož Proizvajalec: ASAHI OKUMA Tip: AF1513-4 Leto izdelave: 1988 Razpon premerov: 7-15 mm Število matric: 4 Lsdpfx Alowi S A As Nehf Število stopenj: 5 Dolžina obdelovanca: 10-160 mm Dolžina stebla pod glavo: 15-130 mm Zmogljivost - kos/min: 130 Tlačna sila: 150 t Lokacija: Na zalogi pri nas

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M08L/8328, Številka ponudbe: M08L/8328 Vrsta stroja: stiskalnica z 2 matricama – 3 udarci Podatki: zaprto rezilo Ljdpjwi S Aijfx Al Njhf Proizvajalec: ASAHI OKUMA Tip: RH60 Leto izdelave: 1988 Območje premera: 8,5 mm Število matric: 2 Število stopenj: 4 Dolžina odseka: 55 mm Dolžina stebla pod glavo: 55 mm Zmogljivost – kosi/min: 200 Tlačna sila: 30 t Lokacija: Na naši zalogi

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M08L/8001, PONUDBENA ŠT.: M08L/8001 Lhodpfxswi S Rao Al Nef Tip stroja: 2-matrična – 3-udarna stiskalnica Info: zaprt nož Proizvajalec: ASAHI OKUMA Tip: ORH120 Leto izdelave: 1988 Območje premera: 14 mm Število matric: 2 Število stopenj: 4 Dolžina razreza: 100 mm Dolžina stebla pod glavo: 90 mm Zmogljivost - kos/min: 100 Tlačna sila: 120 t Lokacija: Na naši zalogi

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M08L/8327, Številka ponudbe: M08L/8327 Vrsta stroja: 2 matriki - 3 udarna stiskalnica Podatek: zaprt nož Proizvajalec: ASAHI OKUMA Lhodpfowi S Apex Al Nsf Tip: RH60 Leto izdelave: 1989 Področje premera: 3-8,5 mm Število matrik: 2 Število stopenj: 4 Dolžina obdelovanca: 55 mm Dolžina stebla pod glavo: 55 mm Zmogljivost - kosov/min: 200 Tlačna sila: 30 t Lokacija: Na zalogi pri nas

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 817, Kompletna linia do kucia na zimno (obejmuje 3 maszyny) Nagłownica jednostemplowa, dwuwarowa (One Die Two Blow Header) Maks. średnica cięcia drutu: 25 mm Długość cięcia: 300 mm Długość trzpienia pod głową: 260 mm Maszyna do ekstruzji Lodstqu U Tspfx Al Nshf Maszyna do gratowania

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 630 mm, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 935 mm, največja hitrost vrtenja: 10.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Technical Data Okuma Multus B300-W with Y-axis and Bar Loader Year of Manufacture: 2010 Machine Configuration: - Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) - Tool Spindle: 10,000 rpm with HSK-A63 - Air blast through spindle center - Tool Magazine: 60 positions - Workpiece catcher - Renishaw 3D probe RMP60 incl. preparation for in-process measurement - Chip conveyor: Hinged belt, Interlit - High-pressure pump: Brinkmann TM26/180 - Prepared for oil mist extraction - Short bar loader: SAMSYS Multi-3000LR 1240/65 Main Spindle: - BigBore with spindle nose A8 – Speed: 38–3,800 rpm - Extension kit A8 for through-hole clamping; max. bar diameter 65 mm - SMW collet chuck, axial pull – Hainbuch Spanntop system Sub-Spindle: - Max. speed: 5,000 rpm with spindle nose A6 - Extension kit A6 for through-hole clamping - Workpiece ejector for sub-spindle, diameter 52 mm Lhjdpoyiayxsfx Al Nof Working Area: - Swing diameter up to max. 630 mm - Swing diameter over cross slide/bed: 630 mm - X-axis travel: 580 mm – rapid traverse 40 m/min - Z-axis travel: 935 mm – rapid traverse 40 m/min - Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min - W-axis travel: 1,000 mm – rapid traverse 20 m/min - B-axis is incremental at 0.001 degrees Weight: Approx. 10,300 kg

Stanje: rabljeno, Leto izdelave: 2022, številka stroja/vozila: L2E0253, CNC stružnica Lhsdpfxey Axr Rj Al Nsf

Stanje: rabljeno, Leto izdelave: 2019, številka stroja/vozila: 0711-101349, Oprema: transportni trak za ostružke, Vertikalni obdelovalni center CNC Lhsdpfx Aey Axf Del Nsf

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Opis: Lhsdpfx Aley Ehaie Nof Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru je možen preizkus. Krmilni sistem: OKUMA OSP-P200MA. Priključna moč: 58 kVA. Pomik v osi X: 1000 mm. Pomik v osi Y: 900 mm. Pomik v osi Z: 1000 mm. Opis: 4 osi. Teža: 26 t. Zasedena površina: 3,3 x 6,5 m. Kapaciteta zalogovnika orodij: 100. Sistem vpenjanja orodij: BT50. Parametri stroja: Pomiki v oseh X, Y, Z: 1000 x 900 x 1000 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, This Okuma MCR-A5C30x65 portal milling machine was manufactured in 2013. It features a robust 100 mm spindle with a speed of up to 4000 rpm and can accommodate a maximum workpiece size of 2540 mm x 5540 mm. On its large 2500 × 6300 mm table, the machine supports an impressive 30,000 kg. Ideal for heavy-duty milling operations with rapid traverse speeds of up to 20,000 mm/min. Contact us for further information about this machine. Machine Advantages Technical Machine Advantages • Machine dimensions (L×W×H): 2500 mm x 6600 mm x 6350 mm // Weight: 59,000 kg • Maximum workpiece width: 2540 mm // Maximum workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm // Max. table load: 30,000 kg // Table height from floor: 850 mm // Effective width between columns: 3050 mm // T-slot (width × number): 24H7 × 13 Ljdsx D S Ekopfx Al Nohf • Cutting feed rate: 1 to 10,000 mm/min // Rapid traverse: 20,000 mm/min // Table movement X-axis: 6500 mm // X-axis travel: 6500 mm // Y-axis travel: 3500 mm // Z-axis travel: 650 mm • Tool holder: Type BT50 + MAS // Tool magazine capacity: 50 tools // Max. tool length: 300 mm • Power supply: 400V, 3-phase, 50Hz // Rated power: 513 kVA // Full load current: 741 A // Peak current: 117/138 A // Short circuit current: 18 kA • Spindle diameter: 100 mm // Spindle speed: 30 to 4000 rpm • Large table, suitable for heavy loads / Large tool magazine capacity / High rapid traverse for efficient operations.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, CNC lathe with driven tools, part ejection blade, tool alignment eye for automatic tool setting, chip conveyor, and material feeder. Control system: OSP-P300L CNC with 15” color touchscreen Machine hours Power-on time: 65,458 h (as of 18.03.2026) NC operation time: 36,054 h Spindle rotation time: 19,533 h Cutting time: 16,582 h Power consumption: 33.1 kVA Maximum swing diameter: 480 mm Maximum machining diameter: 340 mm Maximum turning length: 785 mm Clamping: Collet + 10” hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103), 1x hard jaws (Schunk SHB-J 100), hydraulic through cylinder SS 1770, draw tube Main spindle: Spindle nose JIS A2-6, bore dia. 80 mm, integrated motor Speed range: 45 - 5,000 rpm Power/continuous duty: 22 kW / 15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 rpm Power/continuous duty: 11 kW / 7.5 kW Spindle nose dia. 140 mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6” hydraulic chuck B206-01, 3x set soft jaws (Schunk KM-WBL 62) Hydraulic through cylinder SS1243, draw tube Sub spindle traverse (NC axis W, stroke for W450): 595 mm Spring-loaded part ejector on sub spindle W axis overload monitoring (drive torque) Tailstock clamping (tailstock) in sub spindle Turret Number of tool stations: 12, static and live tools BMT60 (not VDI) Tool holder in: 25 x 25 mm Tool holder out: dia. 40 mm Driven tools Drive output: 7.1/4.1 kW Speed range: 45 – 6,000 rpm Rapid traverse Rapid traverse X and Z axes: 25/30 m/min C axis rapid traverse: 200 rpm Travel X axis: 260 mm Z axis: 510 mm Y axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3,330 mm (without feeder and conveyor) Depth: 1,800 mm Height: 2,250 mm Machine weight: 5,250 kg Accessories: - OSP-P300L Advanced One Touch CF-M-E set including: * Coordinate transformation function * Profile generation function * Advanced One Touch IGF * 3D machining process simulation * Overcut time control * Load monitoring (spindle, feed axes) * NC operation monitoring (incl. part counting) * Cycle time reduction function * Hi-Cut Pro function * Spindle speed control function - High-pressure cooling, max. 20 bar, max. 50 l/min - Material feeder ILS type MUK 7012, with bar magazine 6–70 mm/1,250 mm, year 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn - Filtermist FX4002 extractor Ledpfx Aley A N Hxe Nohf Machine equipment: - Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on main spindle) Collets for dia. (mm): 6–7–8–9–10–11–12–13–14–15–16–17–18–19–20–21–22–23–24–25–26–27–28 –29–30 31–32–34–35–36–38–39–40–41–42–44–45–46–48–50–51–53–55–57–60–64–6 5 Collets with keyway dia. (mm): 55–60–65 - Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on sub spindle) Collets for dia. (mm): 6–7–8–9–10–11–12–13–14–15–16–17–18–19–20–21–22–23–24–25–26–27–28 –30 31–32–34–35–36–39–38–40–41 - Holders: Axial holder - 5x; Toolholder - 5x; Parting blade holder - 2x; Double-face driven tool holder - 3x; Cross driven tool holder - 3x - Reducing bushing (made from bar stock) - Reducer – nylon dia. (mm): 12–14–15.5–17–20–22–24–26–28–30–31–34–36–38–40–42–44–47–50–52 06/2019 spindle repair due to defective bearings. 06/2025 U4 control unit replaced. 10/2025 M control unit replaced. Repairs performed by manufacturer (supplier) technicians, original parts used after overhaul.

Stanje: dober (rabljeno), Leto izdelave: 2002, Ref. št.: 10434 Proizvajalec: OKUMA Tip: LC 40 Leto izdelave: 2002 Vrsta krmiljenja: CNC Krmiljenje: FANUC 18-i TB Lokacija skladišča: Halberstadt Država izvora: Nemčija Število vrtljajev: 10 - 2.800 vrt/min Prehod palice: 91 mm Premer vpenjalne glave: 450 mm Lhsdpfxoy Ed Ays Al Njf Premer konjička: 120 mm Premer struženja: 550 mm Dolžina struženja: 800 mm Obodni premer: 800 mm Prehod vretena: 90 mm Vpenjalna glava vretena: A2-8 Pomik pinole konjička: 150 mm Skupna potrebna moč: 44 kW Približna teža stroja: 8 t Število orodnih postaj: 12 kos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 4.200 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 1.000 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.100 kg, največja dolžina izdelka: 3.900 mm, število mest v zalogovniku orodij: 24, število osi: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin-spindle configuration and an OSP-P200 control system. If you are looking for a high-quality lathe, you should consider the Okuma LB3000EX MYW horizontal turning machine we are offering for sale. Please contact us for further details. • Maintenance contract: Yes • Utilisation: 60% • Shifts: 2 • Number of turrets/magazines: 2 • Priority: 3 • Maximum turning diameter: 360 mm • Spindle configuration: Twin spindle • Control system: OSP-P200 • Tool holder: BMT 60 • Turret: 12 stations • Spindle bore: approx. 80 mm • Electrical maintenance was performed 1.5 years ago. Some electrical components were replaced or cleaned at that time. Additional equipment • Bar feeder • OPTIONAL for an extra charge: Approx. 200 tools available, collets, powered tools Technical Specification Counter Spindle: No Ljdpjy Ddtvsfx Al Nshf Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, moč vretenovega motorja: 22.000 W, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 1.670 mm, pomik osi Y: 505 mm, pomik po osi Z: 190 mm, skupna višina: 2.950 mm, skupna širina: 2.960 mm, skupna masa: 13.700 kg, največja dolžina izdelka: 5.110 mm, število osi: 9, This 9-axis Okuma MAC TURN 350-W was manufactured in 2011. It features a maximum turning diameter of 550 mm and a center distance of 1500 mm. The machine is equipped with a powerful main and sub spindle, both reaching a spindle speed of 3,800 rpm and a milling spindle speed of 12,000 rpm. If you are looking for top-quality turning and milling capabilities, consider the Okuma MAC TURN 350-W turn-mill center that we are offering for sale. Please contact us for further details. • Control unit: OKUMA OSP P200L-H • Included control options: Collision Avoidance System (CAS), One Touch IGF, helical interpolation • Distance between centers: 1500 mm • Maximum swing diameter over covers: 550 mm • Maximum turning diameter: 550 mm • Bar capacity: 75 mm • Main spindle: • Attachment: ASA 8" large bore • Sub spindle: • Attachment: ASA 8 Super Big Bore • Speed: 3,800 rpm • Power: 22/15 kW • Milling spindle: • Taper: HSK A63 • Speed: 12,000 rpm • Power: 11 kW • Tooling: • Tool magazine: 44 positions • Lower turret: 12 positions with live tooling • Axes: • Axis travels: 1670 mm / 1655 mm; 505 mm / 210 mm; 190 mm • B-axis: Continuous 210° • C-axis: 360,000 increments • Coolant/pump pressure: 15 bar • Operating hours (as indicated): • 30870: 8:15 • 13909:49:34 • 6594: 8:59 • 9497:37:03 Additional equipment • Chip conveyor Ledpfx Aloy Ddiwe Nohf Technical Specification Counter Spindle No Driven Tools No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 925 mm, pomik osi Y: 1.050 mm, pomik po osi Z: 600 mm, obremenitev mize: 600 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 26.000 W, število osi: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features an impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking for high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining center we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max. workpiece dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Distance between table and spindle: 60 - 660 mm • Rapid traverse (X/Y/Z): 50 m/min • Maximum feed rate: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X-Y-Z optical scales • Operating hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-Axis Super-NURBS Kit, Centering Tool Programming, Tool Length Compensation, DNC-DT Interface, Tool Orientation Command Additional Equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration set • Coolant shower Ljdpfx Aoy Dc Niel Nohf • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper size BT 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 165 mm, pomik po osi Z: 400 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.569 mm, skupna masa: 3.800 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP P200 L, število osi: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking for a high-quality lathe, you should consider the Okuma GENOS L200E-M horizontal turning center we offer for sale. Contact us for further details. • Max. swing over covers: 450 mm • Max. turning diameter: 200 mm • Max. turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Driven tool speed: 6,000 rpm • Driven tool power: 4.0 / 1.8 kW • Overall dimensions: 2.081 x 1.550 m • Total power-on hours: 23,498 hours • Operating hours: 6,490 hours • Cutting hours: 5,278 hours Additional Equipment Ledpfxoy A I Ste Al Nshf • Static tool holders included Technical Specification Counter spindle: No Driven tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.200 obr/min, potovalna razdalja osi X: 350 mm, pomik po osi Z: 920 mm, moč vretenovega motorja: 40.000 W, skupna višina: 2.600 mm, skupna širina: 2.600 mm, skupna masa: 13.500 kg, največja dolžina izdelka: 5.200 mm, število mest v zalogovniku orodij: 100, število osi: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel distance of 920 mm. The machine is equipped with two turrets, offering a total of 22 tool stations, and operates at a spindle speed of 3,200 rpm. If you are looking for a high-quality lathe, you should consider the Okuma LU35-M horizontal lathe, which we are offering for sale. Contact us for further details. • Maintenance contract: Yes • Utilization: 85% • Shifts: 2 • Number of tools: 12 • Number of turrets/magazines: 2 • Maximum turning diameter: 550 mm • Control system: OSP-P200L • Turret A: 12 stations • Turret B: 10 stations Lodpfx Aljy A Ibho Nshf • Spindle bore: 90 mm • Supply voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated power: 53.1 kVA • Full load current: 76.7 A • Maximum motor current: 134 A • Interrupting capacity: 10 kA • X-axis travel (A turret): 350 mm (equivalent to max. Ø700 mm) • X-axis travel (B turret): 240 mm (equivalent to max. Ø480 mm) OPTIONAL at extra cost: approx. 100 tools, clamping elements, set of chuck jaws, 2-jaw chucks, zero-point clamping system. Electrical maintenance was performed 1.5 years ago, during which several electrical components were replaced or cleaned. Technical Specification Counter Spindle: No Driven Tools: No Taper Size: VDI 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 32.760 h, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 660 mm, pomik po osi Z: 660 mm, skupna višina: 3.300 mm, skupna širina: 5.800 mm, obremenitev mize: 1.500 kg, skupna masa: 11.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 22.000 W, število mest v zalogovniku orodij: 48, teža orodja: 8.000 g, največja dolžina izdelka: 3.000 mm, število osi: 3, This 3-axis Okuma MB66-VA was manufactured in 2010. It features travel distances of 1500 mm on the X-axis, 660 mm on the Y-axis, and 660 mm on the Z-axis. The machine comes with a table size of 1530 x 660 mm and a maximum table load of 1,500 kg. If you are seeking high-quality machining capabilities, you should consider the Okuma MB66-VA vertical machining centre we have available for sale. Contact us for further details. • Maintenance contract: Yes • Condition: An electrical maintenance was performed approximately 1.5 years ago; some electrical components were replaced or cleaned (guides, linear axes, geometry) • Utilization: 70% • Shifts: 2 • Operating hours: 32,760 h • Control system: OSP-P200M Lodsy Ama Nspfx Al Nshf • Table size: 1530 x 660 mm • 4th axis: possible (separately controlled) • Spindle speeds: 8,000 / 12,000 / 15,000 rpm • Magazine capacity: 20 standard (optionally 32 or 48) • Number of turrets/magazines: 1 • Maximum tool length: 300 mm • Maximum tool diameter: 125 mm • Rated voltage: 400 V • Number of phases: 3 • Frequency: 50 Hz • Maximum power consumption: 42.6 kVA • Total current draw: 61.5 A • Maximum motor current: 112 A • Short-circuit withstand capacity: 15 kA • Voltage: 200 VAC, 50 Hz, 3~ • Control voltage: 24 VDC • Power: 9 kW • Weight: 50 kg Additional equipment • Optional: Zero-point clamping plate for table 1530 x 660 mm available at extra cost • Optional: Approx. 530 tools available at extra cost Technical Specification Taper size: SK 40

Stanje: rabljeno, Horizontal machining center, 6 pallets, OKUMA MA40 HAT 6P, OSP U100M CNC, 6 pallets, 400 mm x 400 mm, max. 400 kg, max. workpiece dimensions 600 x 710 mm. Spindle: BT40 / through-spindle coolant. 4th axis: 1° indexing. Tool changer: 100 positions. Lhjdpfx Alot Ek Slj Nof 200 tool holders available. Travels: X = 560 mm, Y = 610 mm, Z = 560 mm. Rapid traverse: 40 m/min. Installed and powered on at Mimu Machine Tools (Italy). X travel: 560 mm Number of pallets: 6 Pallet size: 400 x 400 mm

Stanje: rabljeno, Leto izdelave: 2008, CNC stružnica Okuma LB3000 EX letnik 2008 z gnanimi orodji in krmilnikom Okuma OSP-P200L Maks. premer struženja: ø340 mm. Maks. dolžina struženja: 1.000 mm. Premer nad posteljo: 580 mm. Premer nad suportom: 470 mm. Premer vretena: ø80 mm. Kapaciteta vretena: ø120 mm. Hitrost vretena: 45–5.000 vrt/min. Os Z: 1.065 mm. Os Y: 260 mm. Revolver: 12 postaj (vse gnana orodja). Hitrost gnanih orodij: 45–6.000 vrt/min. Os C: 360° indeksiranje. Konica: MT5. Moč vretena: 22 kW. Serijska št.: 141960 (2008) Teža stroja: 6.150 kg. Skupne mere (D x Š x V): 3.500 x 1.900 x 2.000 mm. Vključen transporter za odrezke: pribl. 4.700 x 600 x 1.500 mm Ljdpjy Dr I Isfx Al Nehf

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Year of manufacture: 2001 2-axis CNC lathe with robotic loading Lodpfsk Hz Iwjx Al Nshf Description: 2-axis (X-Z) lathe for short workpieces, equipped with a robotic workpiece magazine X-axis travel: 180 mm Z-axis travel: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Stanje: rabljeno, Leto izdelave: 2000, Maksimalni premer struženja: 800 mm Maksimalna dužina struženja: 800 mm Stezna glava: bez Dokumentacija: uključena Upravljački sistem: Okuma OSP Opseg obrtaja: 10-2800 o/min Prečnik šipke: približno 91 mm Nosač vretena: A2-8 Snaga: 44 kW Prečnik stezne glave: oko 450 mm Revolver: 12 pozicija Konjić: oko 150 mm Težina mašine: oko 8 t +++++ Molimo da obratite pažnju da je mašina u demontiranom i spremnom za utovar stanju. Zbog toga demonstracija pod naponom ili izrada video snimka nisu mogući. Naš oglas sadrži najreprezentativnije fotografije najvišeg mogućeg kvaliteta. Slanje dodatnih slika, nažalost, nije moguće. +++++ Lhodpsh D Anajfx Al Nsf

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 22 kW - Spindle speed: 12,000 rpm LINEAR AXES Lhsdpoy Er Hyjfx Al Nef - Travel X/Y/Z axes: 1,250 / 660 / 540 mm - Rapid traverse (X/Y/Z): 40 / 40 / 32 m/min - Feed rate (X/Y/Z): 32 m/min SWIVEL AXIS A - Travel: [degrees] SWIVEL AXIS C - Speed: 1,000 rpm - Travel: 360 degrees TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 48 TABLE - Max. workpiece diameter: 730 x 500 mm - Max. table load: 500 kg - Distance from table to spindle nose: 127 - 660 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Floor space required: 2,940 x 3,367 mm - Machine height: 3,541 mm - Machine weight: 13,000 kg MACHINE HOURS - Power-on hours: 57,114 h - Operating hours: 23,087 h EQUIPMENT - Control: OSP-P200M - Turning option - Coolant tank * with paper filter - Through-spindle coolant supply (IKZ) - Chip conveyor - Oil mist extraction: LOSMA - Spindle cooling - Workpiece probe: RENISHAW TS27R - Tool probe: RENISHAW OMP60

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 565 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.000 kg, največja dolžina izdelka: 3.900 mm, število osi: 3, Ta 3-osni stružnica Okuma LB3000 EX je bila izdelana leta 2008. Ima maksimalni premer struženja 340 mm in konjično razdaljo 1020 mm. Stroj je opremljen z zmogljivim krmiljem OSP-P200 in ponuja območje vrtljajev vretena od 45 do 5000 min⁻¹. Če iščete visokokakovostno stružnico, razmislite o horizontalni stružnici Okuma LB3000 EX, ki jo imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Lhsdpfey Aaxrjx Al Nef OPTIONALNO za doplačilo: Na voljo približno 200 orodij. Pred 1,5 leti je bilo izvedeno električno vzdrževanje, pri katerem so bili nekateri električni deli zamenjani ali očiščeni. Tehnične specifikacije Kontra vreteno: Ne Pogonska orodja: Da

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Krmilnik OKUMA OSP-P300M Velikost mize: 1300 x 560 mm Maksimalna obremenitev mize: 900 kg Pomik v osi X: 1050 mm Pomik v osi Y: 560 mm Pomik v osi Z: 460 mm Hitrost vretena: 12.000 min⁻¹ Vpenjalni stožec: SK50 Magazin: 32 mest Potreba po električni moči: 22,2 kVA / 400V Skupna teža: 7700 kg Dimenzije (D x Š x V): 2900 x 2450 x 2900 mm Dodatna oprema, oprema - Transporter za odrezke - Hladilni sistem - Transformator - Nekaj vpenjalnih prijemal s privijačnimi vijaki - Hladilnik vretena - Dvižne kljuke - Priročniki Ledpfx Asyvr N Nol Nehf Stroj se prodaja zaradi zaprtja podjetja.