Okuma Multus B400 nakup rabljenega (185)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, Here are the details of the Okuma Multus B400 featuring main and sub spindle, HSK 63 tool magazine with 80 positions, 1500 mm turning length, main spindle bore 100 mm. CNC turning and milling center with OKUMA OSP P200L CNC control. - Upgraded main spindle Ø110 mm, Ø150/110 mm, spindle nose size 11, speed range 38–2800 rpm - Sub spindle as W-axis incl. hollow clamping device with Ø70 mm bore in the draw tube - Screw thread interpolation, also for thread milling - Tool height compensation in Y-axis for turning tools - Extension kit “M” OSP P200L (Kit One-Touch IGF-M-D) - Multi-function tool software for special tool use - 80-position tool changer instead of 20 positions - Software for C-axis synchronization to simultaneously control both C-axes - Increased speed 10,000 rpm for driven tools, 20/14 kW, max. 85 Nm Blodpfx Ajtdg Evsfqjr - Interlit ISF 540/6670 hinged belt chip conveyor with integrated coolant tank - Interlit SPB4 gravity band filter with 900 L clean tank - TH 90/690 FSI frequency-controlled supply pump for SPB 4 gravity band filter - Hand rinsing pistol for attachment to additional coolant tank SPB4 - SMW VNK 250/110 power chuck cylinder for hollow spindle with Ø110.5 mm bore, Rota THW Plus 315-104 A11 chuck, SMW VNK 250/110 cylinder - 2-stage clamping pressure for the power clamping device, selectable via program - Door automation for Multus B400: open/close via M-code, two doors, both open simultaneously - Rota THW Plus 315-104 A8 chuck, SMW VNK 225/95 cylinder mounted Year of manufacture: 2011 Commissioned: June 2011 Warranty: No warranty is provided for the used machine. HAF Präzisionstechnik, however, assures that no defects, including hidden defects, are known. Unknown defects cannot be excluded. The machine is powered up and in very good condition. Inspection possible by appointment. We are also happy to process your acceptance parts in advance.

Stanje: dober (rabljeno), Leto izdelave: 2008, Maximum swing diameter over bed: 700 mm Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: size 11 Total power requirement: 59.5 kVA Machine weight approx.: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 – 152 mm - Full-stroke cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X / Z / C axis - Programmable CNC tailstock on W axis - Drilling/milling spindle and C axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with travel +115 / -115 = 230 mm Bjdpfxsxmirge Afqolr - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for the use of multifunction tools, e.g. special tool with radially arranged indexable inserts, that can be positioned in the drilling/milling spindle at 60°, 90°, 120°, and 180° - Hobbing software for straight and helical gears with speed synchronization of main and milling spindle - Electrostatic extraction system - Chip conveyor - Documentation - CE marking

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: Okuma Model: Multus B300-W CNC: OSP-P200L Leto izdelave: 2010 X-os: 580 mm Z-os: 935 mm Y-os: 160 mm C-os: 360° (0,0001°) B-os: revolver H1 ATC, HSK 63, 6000 vrt/min, PREX 11/7,5 kW Hitrost vretena: 38-5000 vrt/min 40-ATC Bjdexmg Sqepfx Afqjlr Teža stroja: 9982 kg Dimenzije stroja: D=4368,8 x Š=2032 x V=2590,8 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 1.771 h, Krmilna enota Znamka: OKUMA Model: OSP-P300SA Glavni pogon Območje vrtljajev vretena: 38-3800 Vpenjalni stožec orodja: HSK 63 Število osi: 4 Pomiki Pomik Y-osi: 160 mm Pomik B-osi: 0,001° Orodja Število mest v zalogi orodij: 40 Mediji Odvajač ostružkov: Da Dodatna oprema Visokohitrostno krmiljenje HI-Cut Pro Ta 4-osni stružno-rezkalni center Okuma Multus B300 II je bil proizveden leta 2022. Opremljen je s krmilno enoto OKUMA OSP-P300SA, glavnim vretenom s trivrščeno vpenjalno glavo premera 304 mm ter nasprotnim vretenom z osjo C. Rezkalno vreteno doseže do 6000 vrt/min s 65,7 Nm navora. Če iščete stroj za visokokakovostno struženje in rezkanje, preučite ponudbo Okuma Multus B300 II. Za več informacij nas kontaktirajte. Vrste uporabe Bjdpexy Tiisfx Afqolr Rezkanje

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: 247078, Max. turning diameter: 630 mm Max. machinable diameter: 630 mm Max. distance between centers: 900 mm Travel paths: X-axis: 580 mm (+480 / –20 mm) Z-axis: 935 mm Y-axis: 160 mm (+80 / –80 mm) C-axis: 360° (in 0.001° increments) B-axis: 225° (–30° / +195°; in 0.001° increments) Spindle speed: 50 – 5,000 rpm Tailstock type: NC-controlled, MT5 Spindle nose: A2-8 Spindle bore: Ø 80 mm Spindle bearing diameter: Ø 120 mm Turret type: H1-ATC Tool holder: HSK-A63 Number of stations: 1 Tool magazine capacity: 40 tools Tool size: 25 × 25 mm Shank diameter: Ø 32 mm Max. tool diameter: Ø 90 mm Max. tool length: 300 mm Bedpfxjxtn Ero Afqolr Max. tool weight: 8 kg Driven tool power (5 min / continuous): VAC 11 / 7.5 kW Milling spindle speed: 50 – 6,000 rpm Milling spindle torque (5 min / continuous): 65.7 / 44.8 Nm Feed rate: 0.001 – 1,000 mm/rev Rapid traverse speed: X-axis: 40 m/min Z-axis: 40 m/min Y-axis: 26 m/min C-axis: 200 rpm B-axis: 30 rpm Spindle motor power (30 min / continuous): OKUMA PREX 15 / 11 kW Spindle motor torque (10 / 20 min / continuous): 412 / 281 Nm Feed motor power: Z-axis: OKUMA BL 2.8 kW X-axis: OKUMA BL 3.5 kW Y-axis: OKUMA BL 2.9 kW W-axis (tailstock): OKUMA BL 2.9 kW Coolant pressure through milling spindle: 20 bar Coolant pump output: 0.8 kW Machine dimensions (L × W × H): 4,035 × 2,257 × 2,587 mm Machine weight: 10,000 kg Control: OKUMA OSP-P300SA Display: 15" touchscreen (OSP Suite)

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 450 h, CNC Turning and Milling Center, used Well-maintained, lightly used machine. On 15.9.2025, OKUMA Germany carried out a geometry inspection and confirmed the machine's "overall very good condition." Manufacturer: OKUMA Model: MULTUS B250II – C - 750 Year of manufacture: 2022 Control: OSP-P300SA incl. OSP Suite Operating hours (as of 15.9.2025): Spindle hours total: 485 h Total power-on hours: 3,340 h Bjdpfx Afjwydv Aoqjlr Work area: Turning length: 750 mm Z-axis travel: 800 mm X-axis travel: 500 mm Y-axis travel: 200 mm (+/- 100 mm) C-axis: 360,000° B-axis: 225° W-axis (tailstock): 810 mm Tool spindle = 360,000° Main spindle: Max. speed: 5,000 rpm Power: 22 kW Milling spindle: Max. speed: 12,000 rpm Power: 12 kW Interface: HSK-A63 Equipment: - 40-position tool changer - 3-jaw chuck Kitagawa - ICS coolant system - Electronic handwheel - Right-side chip conveyor - Screw thread interpolation / thread milling + eccentric milling - Control extension for conversational programming + helical (circular) thread cutting INCLUDING approx. 40 x HSK-A63 tool holders (without tools) This is a well-maintained, serviced machine from a reputable company. The machine has already been dismantled by a specialist company (22.9.2025) and is therefore offered free-loaded.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Machine type: CNC Turning-Milling Center Manufacturer: Okuma Model: Multus U4000 2SC 1500 Commissioning: As stock machine 2017 Control: OSP P300S Spindle hours: approx. 3,000 Included: various tools and chuck jaws Bjdpfxexw Thme Afqolr Condition: very good Delivery time: short notice – by agreement Equipment and Technical Details: ▪ Enlarged main spindle KK Size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor output 32kW Torque 955Nm ▪ Hollow clamping cylinder Ø 127mm SMW VNK 320-127 with bore Ø 127mm ▪ Pressure reducing valve Adjustment range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-position tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinge belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum pocket filter TMF300 with clean tank 980l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on lower turret (not possible in combination with driven tools for the lower turret) ▪ Door automation ▪ Robot Interface Type E for connecting additional loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system ▪ Main drive (Okuma motor spindle): 22kW / 700 Nm / 50–4,200 rpm Spindle nose KK Size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 stages Range switching at full speed ▪ Lower turret: 12 stations ZB-axis with cylindrical roller guide XB-axis with slideway ▪ CAS real-time collision avoidance system ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as a touch screen/panel with vertical screen and tiltable keyboard (angle adjustable) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis travel +150 / -150 = 300 mm ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22kW / 120Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling of tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (when using standard chuck) for safe setup ▪ Machine management MacMan with integrated data collection (BDE) ▪ Parts program memory 2 GB ▪ Max. length of individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic spindle speed oscillation via periodic speed variation ▪ Tool height correction on Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation + / - 0.1° Optional ▪ Transport organization and execution ▪ Machine installation and setup ▪ Machine commissioning

Stanje: rabljeno, Description: Main Spindle: Technology: Motor spindle Speed: 4,200 rpm Power: 22 kW Torque: 427 Nm Spindle bore: 91 mm Through-hole cylinder: 86 mm C-axis: High-precision package Chuck: SMW KNCS-N 275-86 K8 Sub Spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 22 kW Torque: 420 Nm Spindle bore: 80 mm Through-hole cylinder: 77 mm C-axis: High-precision package Chuck: SMW BHD-FC 210-52-3 Tool Carrier X/Y/Z/B: Technology: Milling spindle Speed: 12,000 rpm Power: 22 kW Torque: 120 Nm Tool interface: HSK 63 Y-axis: 250 mm (+/-125 mm) B-axis: 240° Tool Magazine: Number of stations: 80 Equipment / Accessories: Position measurement: Direct in X/Y/Z-axes (glass scales) Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 70 bar Coolant temperature control: Deltatherm E4 Chip flushing: Machining area, hand gun Precision package: C-axes high-precision Software package: 5-axis auto-tuning Software option: Multi-function tool Gear machining software: Hobbing, Power skiving CNC extension: Conversational programming Workpiece measuring: Renishaw probe Tool measurement: Tool setter Tool breakage monitoring: Renishaw TRS2 B-axis: NC function and turning function Bar feeder: LNS Quickload Servo III+ Automation preparation: Robot interface Work area door: Automatic Setup operation: Electronic handwheel Blodpfx Ajwu I Irsfqer

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 127728, Okuma MULTUS B300 5-osni CNC stružno-rezkalni center (2006) Krmiljenje Okuma OSP-P200L Merilna sonda Renishaw Polž za odvajanje ostružkov V vzdrževanju / manjkajoči deli Bljdpfx Aex Ap A Defqjr Sublokacija – Stavba 3

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Krmilna enota Znamka: OKUMA Model: OSP-P300S-H Pomiki Pomik po Y-osi: 160 mm Dodatna oprema Komplet za obdelavo po Y-osi: Helikalna interpolacija / funkcija struženja po Y-osi z zamaknjenimi stružnimi nosilci orodij / pretvorba koordinat / sistem dvojnega tlačnega vpenjanja glavnega vpenjala z aktivacijo preko M-kod (nepovratno) / sistem dvojnega tlačnega vpenjanja podvpenjala preko M-kod (nepovratno) Menjalnik orodij za 60 orodij ATC / Priprava za visokotlačno hlajenje: 70 bar / zunanji hladilni agregat: 0,8 kW, 6 bar, 20 l/min / električna orientacija vretena / izpihovanje s stisnjenim zrakom za čiščenje vpenjala Bedpfexg Umpsx Afqelr Sistem za preprečevanje trkov (CAS) / pripravljenost za transportni trak odrezkov / veliko vreteno, odprtina ASA 6": 22/15 kW, 3800 obr/min / visokonatančno pozicioniranje C-osi / neprekinljiva B-os / zaloga orodij s 60 mesti / programska oprema z ločljivostjo 0,1 mikrona / API knjižnica 2 za OSP-P300S / standardni transportni trak za odrezke na desni strani / hladilna črpalka 15 bar, 20 l/min / filtrirna enota s 4 tekstilnimi filtri (25 mikronov), črpalka 15 bar, 20 l/min Vpenjalo SCHUNK ROTA THW+260-81R A8 s cilindrom KITAGAWA SS1770 za glavno vreteno Big Bore Vpenjalo SCHUNK ROTA THW+215-66 A6 s cilindrom KITAGAWA SS1452 za podvreteno Komplet za 5-osno obdelavo: Super NURBS na 5 oseh / vektorska regulacija / DNC-DT vmesnik / nadzor položaja orodja / 3D transformacija koordinat / helikalna interpolacija (vključuje programsko opremo za profil nagnjenih ravnin) Ta 5-osni OKUMA MULTUS B300 II W je bil izdelan leta 2016. Opremljen je z vretenom ASA 8, ki omogoča do 5000 obr/min in prehod palice 65 mm, največji stružni premer znaša 630 mm. Vključuje pripravo na visokotlačno hlajenje do 70 barov, neprekinljivo B-os z vpenjalom HSK63 ter zalogo orodij s 60 mesti, kar omogoča optimalno struženje in rezkanje. Če iščete vrhunske zmogljivosti za stružno-rezkalne operacije, je ta OKUMA prava izbira. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 213 h, Funkcionalnost: popolnoma funkcionalen, Control system OSP-P300SA with LCD screen Max. turning diameter: 630 mm Max. turning length: 900 mm Travel X: 580 mm (+480/-20 mm) Travel Y: 160 mm (+80/-80 mm) Travel Z: 935 mm Spindle nose: A2-8 Spindle bore: D80 mm Main spindle speed: 50 - 5,000 rpm C axis: 360° (0.001° increments) B axis: 225° (-30°/+195°; 0.001° increments) Driven tool power (5 min/cont.): VAC 11/7.5 kW Milling spindle speed: 50 - 6,000 rpm Milling spindle torque (5 min/cont.): 65.7 / 44.8 Nm Tool holder: HAS-A63 Number of tools: 40 positions Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X): 40 m/min Rapid traverse (Z): 40 m/min Rapid traverse (Y): 26 m/min Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Bodewrr Nhjpfx Afqslr Dimensions (L x W x H): 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Equipment, Accessories - Through-spindle coolant, 20 bar - KITAGAWA B-212A8 12” power chuck - NC tailstock - B axis indexing by 0.001° - Coolant supply through milling spindle - Double foot pedal - Y axis travel 160 mm (+80/-80 mm) - Hydraulic unit - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS – Collision Avoidance System - * Workpiece coordinate system 10 pcs (1 set) - Control software: * Coordinate transformation (1 set) * Profile generation (1 set) * Coordinate calculation (1 set) * Coordinate shifting, rotation, copying (1 set) * Realistic 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitoring (main spindle, carriage) (1 set) * Program run monitoring (1 set) * 2-color signal lamp (1 set) Chip conveyor Coolant system Machine feet Documentation The machine is being sold due to company closure. Mint condition. Program runtime only approx. 213 hours.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Reference: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2015 Keyboard/Software Language: International / Spanish Country of origin: Japan Technical Specifications: Capacity: Bsdpfx Aeu U E Avjfqelr Swing over bed: Ø 650 mm Distance between centers: 1,500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1,500 mm Bar capacity (Main spindle): Ø 70 mm Bar capacity (Counter spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle bore: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 – 4,200 rpm Motor: 22/15 kW (30 min/cont) Counter spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle bore: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 – 4,200 rpm Motor: 22/15 kW (30 min/cont) X axis: Travel: 645 mm Rapid traverse: 50,000 mm/min Z axis: Travel: 1,600 mm Rapid traverse: 50,000 mm/min Y axis: Travel: 250 [± 125] mm Rapid traverse: 40,000 mm/min W axis: Travel: 1,594 mm Rapid traverse: 30,000 mm/min B axis: Controlled angle: -30° to +210° (0.001° increments) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increments) Rapid traverse: 200 rev/min Turret: Type: H1 Number of tools: 1 (Tool L or M) Tool dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Milling head: Rotational speed: 50 – 12,000 rpm Speed ranges: 2 ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Tool holder taper: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Max. diameter of non-adjacent tools: ø 130 mm Max. tool length: 400 mm Max. tool weight: 10 Kgf Dimensions and weight: Machine height: 2,905 mm Floor space required: 4,480 x 2,995 mm Machine weight: 16,200 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, stružna dolžina: 3.000 mm, premer struženja: 1.050 mm, največja hitrost vretena: 1.500 obr/min, zunanji premer vpenjalne glave: 375 mm, マルチタスキングマシン OKUMA MULTUS B750 C3000 年式：2017年 OSP-P300SA 15インチチャック 最大加工径：1050mm 最大加工長：3000mm Blodpfx Afjwi Ezrjqsr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Krmilna enota Znamka: OKUMA Model: OSP-P200L Glavni pogon Območje vrtljajev vretena: 38–5000 Premer izvrtine vretena: 100 mm Število osi: 5 Pomik Pomik osi X: 580 mm Pomik osi Y: ±80 mm Pomik osi Z: 935 mm Pomik osi W: 1000 mm Bsdpfx Afsxl Hz Neqjlr Obdelovanec Premer obdelovanca nad posteljo: 630 mm Ta 5-osni Okuma Multus B300-W je bil proizveden leta 2006. Gre za robusten centrirni in rezkalni stroj z zamahom nad posteljo 630 mm in največjim premerom struženja 450 mm. Opremljen je s podajalnikom palic, merilno napravo za orodje in orodnim magazinom s kapaciteto 40 orodij, kar omogoča učinkovito delovanje. Krmilni sistem je napreden Okuma OSP-P200L. Če iščete visokokakovostne zmogljivosti struženja, razmislite o stroju Okuma Multus B300-W, ki ga imamo na voljo. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 5500 kg Višina stroja: 1885 mm Globina stroja: 1900 mm Dimenzije Dolžina stroja: 2700 mm Premiki Blsdoxx Dyiopfx Afqjr Premik osi X: 300 mm Premik osi Z: 675 mm Ta triosni horizontalni stružni stroj Okuma LB 400 CM je bil izdelan leta 2001. Ima maksimalni premer struženja 420 mm, območje hitrosti vretena od 28 do 2.800 vrt/min in motorizirane orodne postaje s hitrostmi do 3.000 vrt/min. Idealen je za natančno struženje in vključuje revolversko glavo VDI 40 z 12 pozicijami. Če si želite kakovostnega struženja, razmislite o stroju Okuma LB 400 CM, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 625 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, nazivna (navidezna) moč: 30 kVA, vrtilni moment: 163 Nm, obremenitev mize: 400 kg, premer vrtljive mize: 400 mm, največja hitrost vrtenja: 15.000 obr/min, dovod hladilne tekočine: 20 letvica, število vreten: 48, dolžina orodja: 300 mm, premer orodja: 70 mm, teža orodja: 10 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Technical specifications: CNC OSP P 200 Bsdpfouw Sq Ujx Afqelr Chip conveyor 48 tools Full-contour rotary table, 360,000 positions 15,000 RPM, BT 40 Coolant through spindle, 20 bar Table-mounted tool presetting Work area shower-type rinsing system Note: The machine has always operated with full oil (neat oil), processing Teflon material.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Transport, installation, commissioning – we deliver your machine ready for operation (optional) Type of machine: CNC lathe Manufacturer: Okuma Model: LB400M-1SC Year of manufacture: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14,502 hrs Country of origin: Japan Delivery time: by arrangement Machine features: - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touch setter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock present - Coolant supply, including through-tool - Conversational programming IGF - Chip conveyor (scraper type) Technical details: - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm Blsdpfx Afjxrtm Soqer - Z-axis travel: 675 mm - C-axis travel: 360° - Chuck passage: 72 mm - Spindle bore: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: 12 stations - Spindle speed: 2,800 rpm - Main spindle power: 22/30 kW - M-spindle – live tool stations: 12 - M-spindle: 5.5 kW - M-speed: 3,000 rpm Optional: - Organization and execution of transport - Machine import and installation - Commissioning of the machine

Leto izdelave: 2008, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, The machine will be provided loaded free onto truck. TECHNICAL DETAILS Turning length over bed / saddle: 670 / 480 mm Turning length: max. 750 mm Turning diameter: max. 430 mm Bar diameter: max. 102 mm Spindle speed: 42 – 4200 rpm Travel X / Z: 300 / 840 mm Rapid traverse: 30 / 25 m/min Spindle power cont. / 30 min: 30 / 22 kW Spindle nose: ASA 11 Tool turret: 12 stations Tool size: 25 x 25 mm / 40 mm Tool rotation speed: 45 / 6000 rpm MACHINE DETAILS Weight: 6700 kg Blsdpfspgrzcsx Afqor Dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Chip conveyor Tool presetting Automatic door opening High-pressure pump, 6 bar Driven tools and various static tools (see photo)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Reference: LT-2501 Manufacturer: Okuma Model: LB4000EX-MC x 750 Control: Okuma OSP-P200L Year of manufacture: 2007 Keyboard/Software Language: International / Spanish Country of origin: Japan Technical Specifications: Capacity: Swing over bed: Ø 670 mm Swing over carriage: Ø 480 mm Distance between centers: 770 mm Maximum turning diameter: Ø 430 mm Maximum turning length: 750 mm Maximum bar capacity: 90 mm (Modification required) Main Spindle: Spindle diameter: Ø 160 mm Spindle nose (type): JIS A2-11 Spindle bore: Ø 112 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 30 – 3,000 rpm Motor: 37 / 30 kW (30 min / continuous) Motor type: PREX Motor Tailstock: Rotating center: MT 5 Quill stroke (W-axis): 780 mm Rapid traverse: 12,000 mm/min Maximum thrust: 7,500 N Z-axis: Travel: 840 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 30,000 mm/min X-axis: Travel: 300 mm Cutting feed: 0.001 – 1,000.00 mm/rev Rapid traverse: 25,000 mm/min C-axis: Controlled angle: 360° (0.001° increment) Turret: Type: M-V12 NC Number of tools: 12 x BMT40 (L or M) Indexing time: 0.2 sec/position Bjdpfow Dvb Sox Afqslr Tool dimensions: External turning: 25 x 25 mm Internal turning: Ø 40 mm Live Tooling: Speed: 45 – 6,000 rpm Speed ranges: 1 range, infinitely variable Motor: 7.5 / 4.3 kW (25 min / continuous) Motor type: PREX Motor Dimensions and Weights: Machine height: 1,955 mm Floor space required: 3,050 x 1,900 mm Machine weight: 6,300 kg Included Options: Quick-change chuck (3 jaws, Ø 315 mm) SCHUNK ROTA THW plus 315-104 CROMAR chip conveyor Assisted programming (ONE Touch IGF Advanced) Rigid tapping DNC-T1

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 8600 kg Višina stroja: 2522 mm Glavni pogon Hitrost vretena: 3000 vrt/min Moč motorja vretena: 30 kW Število osi: 3 Dimenzije Dolžina stroja: 4175 mm Pomiki Bljdoxxndxspfx Afqsr Pomik osi X: 300 mm Pomik osi Z: 1590 mm Pomik osi Y: 140 mm Ta 3-osni horizontalni stružni stroj Okuma LB4000EX II je bil izdelan leta 1997. Ima največji premer struženja 430 mm, razdaljo med konicama 1.520 mm in območje hitrosti vretena do 3.000 vrt/min. Stroj vključuje 3-čeljustno vpenjalno glavo Kitagawa in revolversko glavo Okuma M-V12 z 12 postajami. Če iščete visokokakovostne možnosti struženja, razmislite o stroju Okuma LB4000EX II, ki ga ponujamo v prodaji. Za več informacij o tem stroju nas kontaktirajte. Vrsta uporabe Struženje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 13.812 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 108877, potovalna razdalja osi X: 900 mm, pomik osi Y: 780 mm, pomik po osi Z: 850 mm, obremenitev mize: 800 kg, največja hitrost vretena: 20.000 obr/min, TECHNICAL DETAILS Travel distances Bsdpfx Afjxyiq Neqolr X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance spindle center to pallet surface: 50 – 950 mm Distance spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Rapid traverse & feed Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool shank: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (with adjacent pockets empty): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating hours Spindle hours: 13,812 h Machine hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table APC Splash guard Coolant supply system Chip-blowing air (nozzle system) Internal chip conveyor (in-floor system) Spindle head cooling system Work lamp (fluorescent) Signal tower (3-stage) Foundation pads Hold-down bolts

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), - RABLJEN 2-OSNI CNC STRUŽNIC Bsdpfeiidpysx Afqolr NAJVEČJI PREMER VRTENJA: 530 mm NAJVEČJA DOLŽINA STRUŽENJA: 500 mm NAJVEČJI PREMER STRUŽENJA: 340 mm PREMER DROGA: 62 mm VRETENO: 3800 vrt/min; 11-15 kW; ASA A2-6" POMIK X-OSI: 260 mm POMIK Z-OSI: 520 mm HITRI POMIKI X-Z: 15 - 20 m/min REVOLVERSKA GLAVA: 12 POZICIJ KRMILNA ENOTA: OKUMA SKUPNE DIMENZIJE: 2815 x 2815 x 1745 mm DODATKI: TRANSPORTER OSTRUŽKOV; MERILNIK ORODIJ

Stanje: rabljeno, Leto izdelave: 1998, proizvajalec krmilnikov: Okuma, model krmilnika: OSP7000L, Opis: Glavna vretena: Tehnologija: Motorska vretena Hitrost vrtenja: 4.500 min⁻¹ Moč (maks.): 22 kW Prehod palice: 65 mm Vpenjanje obdelovanca: Tričeljustna vpenjalna glava, Kitagawa B-210 Nosilec orodja I (X/Z): Bjdpfxexxftwe Afqslr Tehnologija: Revolver z 12 postajami Vpenjanje orodja: VDI40 Hod v X/Z: 260/640 mm Hitri pomik v X/Z: 15/20 m/min Nosilec orodja II (X/Z): Tehnologija: Revolver z 8 postajami Vpenjanje orodja: VDI40 Hod v X/Z: 140/615 mm Hitri pomik v X/Z: 15/20 m/min Oprema/Dodatki: Upravljanje odrezkov: Transporter odrezkov Upravljanje hladilne tekočine: Črpalka KSS Merjenje orodja: Avtomatska merilna roka Ostala oprema: Transformator

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 20.249 h, Krmilna enota Znamka: OKUMA Model: OSP-P300 Ta Okuma Genos M560-V-e je bila izdelana leta 2018. Opremljena je z naprednim krmilnim sistemom Okuma OSP-P300 ter pnevmatskim vpenjalnim sistemom SMW Autoblok, ki zagotavlja konstantno vpenjalno silo. Idealna je za avtomatizirano serijsko proizvodnjo s pomočjo avtomatizacijskega sistema Robojob Mill-Assist iz leta 2022. Za več informacij nas kontaktirajte. Bsdex Alkkopfx Afqslr Vrste uporabe Rezkanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 26.858 h, Krmilna enota Znamka: OKUMA Model: OSP P20 Bodpox Alkdsfx Afqjlr Ta štiriosni stroj Okuma Genos 560-V je bil izdelan leta 2011. Opremljen je z naknadno vgrajeno, popolnoma integrirano četrto osjo, primežem Allmatic ter ploščo za vpenjanje z ničelno točko na vrtljivi mizi. Dokumentacija je na voljo v nemščini in angleščini. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Okuma Genos 560-V. Kontaktirajte nas za več informacij. Vrste uporabe Rezkanje