Okuma Lb 3000 nakup rabljenega (222)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 215 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 120 mm, pomik po osi Z: 1.010 mm, moč vretenovega motorja: 22.000 W, število osi: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine is equipped with a motor-driven turret with 12 positions and a Y-axis travel of 120 mm. If you are looking for a high-quality lathe, consider the Okuma LB 3000 EXII horizontal lathe we have for sale. Contact us for further details. - Control: OSP-P300LA - Spindle speed: 5,000 rpm - Spindle power: 22 kW - Spindle nose: ASA 6" (80 mm bore, no drawbar) - Bar capacity: 52 mm (Kitagawa SR1453 cylinder) - Spindle orientation: Electric - Y-axis travel: 120 mm - C-axis rotation: 360° (0.001° increments) - Turret: 12-position radial, driven - Turret motor speed: 6,000 rpm - Turret motor power: 7.1 kW - Tailstock: MT5 (500 kgf thrust, rotating center) - Toolholders: Eppinger live/static toolholders - High-pressure coolant pump: 0.8 kW, 6 bar, 20 l/min - Tool presetting: Manual - Programming: Conversational IGF - Chip conveyor: Enomoto hinge belt chip conveyor with external control panel - Voltage: 400 V - Number of phases: 3 P - Frequency: 50 Hz - Maximum power consumption: 33.1 kVA - Total current consumption: 47.8 A - Max. motor current: 154 A - Switch cabinet short-circuit withstand capacity: 2.5 kA Lhedpfoza E H Uex Ahueh - Machine is a demonstration model Technical Specification: - Counter spindle: Yes - Driven tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2007, stružna dolžina: 1.065 mm, premer struženja: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x Radial driven tool holders 2 x Axial driven tool holders Spindle bore: 80 mm BMT tooling system Tool measuring probe Spindle hours: 6,960 / Operating hours: 6,270 Lhsdpjwq Rpwsfx Ahueh Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1,065 mm Spindle bore: 80 mm Spindle speed: 4,200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6,000 rpm Driven tool power: 7.1 kW Length: 3,310 mm Width: 1,900 mm Height: 1,970 mm Weight: 6,100 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, stružna dolžina: 995 mm, izvrtina vretena: 80 mm, Maksimalni premer struženja: 530 mm Os X: 260 mm Os Z: 995 mm Vretenina odprtina: 80 mm Hitrost vretena: 5000 vrt./min Moč vretena: 22 kW Hitrost protivretena: 6000 vrt./min Premer prehoda protivretena: 62 mm Moč protivretena: 11 kW Menjalnik orodij: 12 pozicij Hitrost pogonskih orodij: 6000 vrt./min Tool Eye: da Delovne ure: 2800 h Lhjdpfex I Nbtex Ahuoh Dolžina: 3000 mm Širina: 1800 mm Višina: 1900 mm Teža: 6350 kg Opozorilo: Podatki na tej strani so bili po najboljšem vedenju zbrani z naše strani in, kjer je bilo mogoče, od proizvajalca. Podatki so predstavljeni v dobri veri, vendar natančnost ni zagotovljena. Podatki ne predstavljajo pravne podlage ali zavezujočih pogojev. Priporočamo, da vse pomembne podatke pred nakupom preverite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 5.000 obr/min, pomik osi Y: 120 mm, moč vretenovega motorja: 22.000 W, število osi: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine is equipped with a motorized turret with 12 positions and a Y-axis travel of 120 mm. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 EXII horizontal turning machine we have available for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (80 mm bore, without draw bar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm; C-axis rotation 360° (0.001° increments) Lsdpeyq Ngmefx Ahuehh • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: MT5; thrust force 500 kgf; live centre • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual • Programming: Plain text dialog IGF

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 4.200 obr/min, moč vretenovega motorja: 22.000 W, skupna masa: 6.200 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP P200-L, število osi: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a 22 kW main spindle motor. The machine is equipped with a hydraulic and programmable tailstock, a 250 mm chuck, and a bar capacity of 75 mm. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 MY we offer for sale. Contact us for more information. Additional Equipment • Includes oil cooler for the spindle • Side-mounted chip conveyor (hinged belt type) • Dual foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and wiring diagrams Machine Advantages Technical Machine Advantages • Torque: 620 Nm • Spindle nose: A2-8 • Bar capacity: 75 mm • Chuck: 250 mm SMW Autoblok with quick jaw change • Swing diameter: 520 mm • Maximum turning diameter: 380 mm • Maximum turning length: 1050 mm Ljdpfsyaiq Dex Ahuehh • 12-position turret, all driven tools • Turret indexing time: 0.2 seconds • Equipped with static and driven tool holders Additional Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tools speed: up to 4,000 rpm Currently in operation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP - P300L, število osi: 4, Táto 4-osá Okuma LB 3000 EX MYT bola vyrobená v roku 2008 a ponúka pokročilé funkcie pre horizontálne sústruženie. Tento stroj je ideálny na zložité obrábacie úlohy a zaručuje presnosť a efektivitu. Zvážte možnosť zakúpenia tohto horizontálneho sústruhu Okuma LB 3000 EX MYT. Pre viac informácií nás kontaktujte. Dodatočné vybavenie Ledpfx Ahsyalp Ajuohh • Podávač tyčí: Iemca Master mod. 880 33 P/R • Automatické prednastavenie: Áno • Softvér a nástroje na obrábanie ozubených kolies: Áno • Príslušenstvo: Odťah triesok Výhody stroja Technické výhody stroja • Max. obrábateľný priemer: Ø 400 mm • Max. využiteľná dĺžka: 500 mm • Typ: CNC sústruh • Stav: použitý • Stav: optimálny Dodatočné informácie Stroj je stále pod prúdom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, potovalna razdalja osi X: 260 mm, pomik osi Y: 115 mm, skupna masa: 6.850 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P300LA, število osi: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022 and features robust horizontal turning capabilities. It is equipped with an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and spindle speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 EX II that we offer for sale. Please contact us for further information. • Distance between spindle noses: 1085 mm Lodpfjx D Rvnjx Ahushh • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub-spindle bore: 63 mm • Bar capacity through sub-spindle draw tube: 52 mm • Driven tool rotation speed: 45-6000 rpm Additional equipment • Iemca KID 80/16 Plus bar feeder (2022) – includes KID 80 • 250 mm SMW chuck on main spindle • 170 mm Kitagawa chuck on sub-spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double rotary tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with approx. 30 ER collets

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, * Okuma LB 3000 MY. * Vrednost vključenih dodatkov: 18.000–20.000 evrov. * 4-osni stroj. * Popolnoma neodvisen konjiček, programabilen za premikanje po osi Z in vpenjanje preko M-kod. * Revolverska glava z 12 postajami, vse postaje motorizirane. * C-os. * Y-os. * Integriran glavni vretenasti motor: 18,5 / 22 kW. * Motor za motorizirana orodja: 5,5 kW. * Začetni navor motorja: 620 N·m. * Integriran motor brez jermenov ali menjalnika. * Velikost glavnega vretena: A2-8. * Konjiček: konus Morse MT5. Lhsdpszd Nt Eofx Ahueh * Premer obdelovalne palice: 75 mm. * Vpenjalna glava vretena Kitagawa B-210. * Prizmatična vodila na vseh oseh. * Hitrost vrtenja vretena: 4.200 obr/min. * Hitrost motoriziranih orodij: 4.000 obr/min. * Premer struženja: 520 mm. * Maksimalni obdelovalni premer: 380 mm. * Maksimalna obdelovalna dolžina: 1.050 mm. * Hladilnik olja za vreteno. * Komunikacijski vmesniki: USB, PCMCIA kartica in RS-232. * Samodejni nadzor navora in napetosti orodij. * Samodejni pogovorni programerski sistem IGF OSP P200-L. * Samodejni nadzor sile in obrabe orodij. * Parametrično nastavljiv samodejni sistem proti trčenju orodij. * Upravljanje in spremljanje življenjske dobe orodij. * Hitro pomikanje: 20 in 25 m/min na oseh X in Z. * Čas indeksiranja revolverske glave: 0,2 sekunde. * Renishaw roka za samodejno merjenje orodij. * Komunikacijski vmesniki: USB, PCMCIA kartica in RS-232. * Dvojno nožno stikalo za odpiranje in zapiranje glavnega vpenjala ter konjička. * Stransko nameščen pregiben transporter za odrezke. * Komplet statičnih nosilcev orodij za zunanjo in notranjo obdelavo. * Komplet aksialnih in radialnih motoriziranih nosilcev orodij. * Električni transformator. * Dokumentacija: seznam delov, električne sheme, programski in obratovalni priročnik. * Teža: 6.200 kg. * Stroj je trenutno v obratovanju. * Takojšnja dobava, če ni takoj prodan.

Stanje: rabljeno, Leto izdelave: 2017, Tehnični podatki: Premer struženja: 340 mm Dolžina struženja: 1000 mm Krmiljenje: OSP 300 LA Premer nihanja nad prečnim suportom: 470 mm Največji krožni premer nad posteljo: 580 mm Pomik - x: 260 mm Pomik - z: 1065 mm Hitri pomik - vzdolžno/čelno: 30 / 25 m/min Premer palice: 52 mm Premer vretena: 80 mm Hitrost vretena: 5000 1/min Motor vretena: 22 / 15 kW Revolver postaje / od tega gnane: 12/12 VDI 40 Pogonska moč gnane orodja: 7 kW Hitrost gnane orodja: 6000 1/min Pomik konjička: 1015 mm Konjiček – pritrditev pinole MK: 5 Skupna priključna moč: 38.7 kVA Teža stroja cca.: 6500 kg Potrebni prostor cca.: 4 x 2,5 x 2 m Lodpfx Ahezb Rh Hjuohh Oprema: Odvajač ostružkov Signalna lučka 2-kratna Ročna ročna merilna ročica orodja Visoko zmogljiv natančni stružni center z gnanimi orodji in C-osjo. Sistem vpenjalne gredi Steifelmayer za votle gredi je mogoče nadomestiti z običajnim Kitagawa vpenjalnim tulecem premera 250 mm. - Stroj je mogoče prikazati pod napetostjo.

Stanje: rabljeno, Leto izdelave: 2015, Technical details: Swing diameter: 340 mm Turning length: 1000 mm Control: OSP 300 LA Swing diameter over cross slide: 470 mm Maximum turning diameter over bed cover: 580 mm Travel path - X: 260 mm Travel path - Z: 1065 mm Rapid traverse - longitudinal/face: 30 / 25 m/min Bar capacity: 52 mm Spindle bore: 80 mm Spindle speed: 5000 rpm Spindle motor: 22 / 15 kW Turret stations / driven: 12/12 VDI 40 Power for driven tools: 7 kW Speed of driven tools: 6000 rpm Tailstock travel: 1015 mm Tailstock quill taper: MT 5 Total connected load: 38.7 kVA Approx. machine weight: 6500 kg Required floor space approx.: 4 x 2.5 x 2 m Accessories: Chip conveyor 2-stage signal lamp Manual tool measuring arm High-performance precision turning center with driven tools and C-axis; Four machines with robotic loading and one without loading are available. The Steifelmayer collet system for hollow shafts can be replaced with a standard Kitagawa 250 mm chuck. Ljdpfxozbzv Io Ahuohh The automated machines are equipped with a Knoll high-pressure coolant system. - Machine can be demonstrated under power.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 5.379 h, največja hitrost vretena: 4.200 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 120 mm, pomik po osi Z: 1.010 mm, moč vretenovega motorja: 30.000 W, skupna masa: 6.600 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P300LA, število mest v zalogovniku orodij: 12, kot vrtenja osi C (maks.): 360 °, število osi: 4, This 4-axis Okuma LB3000II-MYC 950 was manufactured in 2020. It offers a maximum turning diameter of 340 mm and a maximum turning length of 950 mm. The machine is equipped with a robust main spindle power of 30 kW and a maximum spindle speed of 4,200 rpm. If you are looking for a high-quality lathe, you should consider the Okuma LB3000II-MYC 950 horizontal lathe we are offering for sale. Contact us for further details. • Max. turning diameter: 340 mm • Max. turning length: 950 mm • Swing over cross slide: 470 mm • Main spindle torque: 700 Nm • Spindle speed range: 42 – 4,200 rpm • Spindle bore: 91 mm • Spindle nose: A2-8 (KK size 8) • Front bearing diameter: 140 mm • Turret stations: 12 • Driven tool power: 7.1 kW • Torque driven tool: 23.7 Nm • Driven tool speed: 4,500 rpm • Driven tool speed range: 45 – 4,500 rpm • Rapid traverse X-axis: 25 m/min • Rapid traverse Z-axis: 30 m/min • Rapid traverse Y-axis: 12.5 m/min • Rapid traverse C-axis: 200 rpm • Tailstock: NC tailstock • Tailstock force: 5 kN • Tailstock taper: MT5 • Chuck: SMW KNCS-N 275-86 A8 • Chuck diameter: 275 mm • Chuck through bore: 86 mm • Draw tube bore: 82 mm • Max. chuck speed: 4,700 rpm • Collet chuck: Hainbuch Spanntop mini Axzug 65 K8 • Collet capacity: 4 – 65 mm • Collet chuck diameter: 204 mm • Collet chuck length: 155 mm • Max. collet chuck speed: 6,000 rpm • Coolant system: Knoll KF 110/700 • Through-spindle coolant (TSC): Yes • High-pressure coolant: 70 bar • Coolant tank capacity: 700 l • Filter capacity: 110 l/min • Power supply: 400 V • Phases: 3 • Frequency: 50 Hz • Max. connection power: 38 kVA • Total current consumption: 54.9 A • Max. motor current: 219 A • CE marked: Yes • Driven tools: Yes • Counter spindle: No • Chip conveyor optional, not included: Interlit ISF • Chip discharge: Right side • Chip conveyor discharge height: 1,200 mm Lodpfx Ahjzcf Ansuohh • Spindle hours: 5,379 h • Total power-on hours: 20,878 h Special equipment or accessories are not included Technical Specification • Through-spindle Coolant: Yes • Counter Spindle: No • Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 4.200 obr/min, potovalna razdalja osi X: 200 mm, pomik po osi Z: 1.000 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.100 kg, največja dolžina izdelka: 3.900 mm, število mest v zalogovniku orodij: 24, število osi: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin-spindle configuration and an OSP-P200 control system. If you are looking for a high-quality lathe, you should consider the Okuma LB3000EX MYW horizontal lathe we have for sale. Contact us for further details. • OKUMA OSP P200L control system • OSP-P200 control • 12-station radial tool turret • Turret with 12 stations • Number of turrets: 2 • Toolholder: BMT 60 • Number of tools: 24 • Power of driven tool stations: 7.1 kW • Torque of driven tool: 40.4 Nm • Driven tool speed range: 45-6000 rpm • C-axis included • Y-axis travel: mm (unspecified) • X-axis travel: 200 mm • Z-axis travel: 1000 mm • Hydraulic Y-axis clamping • Sub-spindle with W-axis • Twin-spindle configuration • Main spindle bore: 110 mm • Spindle bore approx. 80 mm • Spindle nose: A2-11 • Spindle speed range: 28-2800 rpm • Spindle speed: 4200 rpm • Main spindle drive: VAC 22/15 kW • Power at 40% duty cycle: 22 kW • Maximum turning diameter: 360 mm • Programmable chuck pressure (2 stages) • Thread milling interpolation X/Y and Z/Y axes • Programmable workpiece ejector • Chip conveyor with integrated coolant tank • Heavy-duty paper band filter system • Coolant tank capacity: 480 l • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction nozzle diameter: 200 mm • Hollow clamping cylinder bore: 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Clamping range: 42-100 mm • Manual collet change device • Sub-spindle stroke: 150 mm • Bar capacity diameter: 5-100 mm • Spindle reduction tube diameter: 90 mm, length: 1500 mm • Chip removal conveyor: PVC with PU coating • Hydraulic clamping cylinder: 52 mm bore • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight: approx. 6100 kg • Maintenance contract: yes • Utilization: 60% Additional Equipment Lhedjy Ddtvjpfx Ahueh • Bar feeder • Optionally, for an additional charge: approx. 200 tools available, collets, power tools Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 565 mm, moč vretenovega motorja: 22.000 W, skupna višina: 2.300 mm, skupna širina: 2.100 mm, skupna masa: 6.000 kg, največja dolžina izdelka: 3.900 mm, število osi: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a center distance of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45-5000 rpm. If you are looking for a high-quality lathe, you should consider the Okuma LB3000 EX horizontal lathe that we are offering for sale. Contact us for further details. • OSP-P200 control system • 12-station radial tool turret • Turret with 12 driven tools • Number of turrets: 1 • BMT 60 toolholders • Number of tools: 12 • Number of available tools: approx. 200 • Power at driven tool stations: 7.1 kW • Driven tool torque: 40.4 Nm • Driven tool speed range: 45-6000 rpm • C-axis included • Sub spindle with W-axis • Main spindle bore: 110 mm • Spindle bore: 80 mm • Spindle nose: A2-11 • Spindle speed range: 28-2800 rpm • Spindle speed: 45-5000 rpm • Main spindle drive: 22/15 kW Lhedpjy Aaxrefx Ahujh • Power at 40% duty cycle: 22 kW • Maximum turning diameter: 340 mm • Center distance: 1020 mm • Programmable chuck pressure (2-stage) • Thread milling interpolation X/Y and Z/Y axes • Programmable parts catcher • Chip conveyor with integrated coolant tank • Heavy-duty paper band filter unit • Coolant tank capacity: 480 l • Coolant pump: 40 l/min at approx. 20 bar • Coolant pump type: Brinkmann TH 90/690-FSI • Extraction port diameter: 200 mm • Hollow clamping cylinder bore: 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore: 101 mm • Draw tube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range: 42-100 mm • Manual collet change device • Sub spindle stroke: 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter: 5-100 mm • Spindle reduction tube diameter: 90 mm, length: 1500 mm • Chip removal conveyor PVC with PU coating • Hydraulic clamping cylinder bore: 52 mm • Machine dimensions: 3.9 m x 2.1 m x 2.3 m • Machine weight: 4000-6000 kg • Maintenance contract: yes • Utilization: high OPTIONAL at extra cost: Approx. 200 tools available The electrical maintenance was carried out 1.5 years ago. During this, some electrical components were replaced or cleaned. Technical Specification: Counter Spindle: No Driven Tools: Yes

Leto izdelave: 2018, obratovalne ure: 1.256 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2189, OKUMA LB3000EX-II – Particularly well-suited for universal turned parts and the complete machining of complex workpieces thanks to generous flat-bed guideways, while high-torque drives ensure outstanding precision and long-term accuracy. TECHNICAL DETAILS Swing over bed: 580 mm Maximum turning diameter: 340 mm Workpiece length: 950 mm Travel distance X / Z / Y: 230 / 510 / 120 (+70/-50) mm C-axis: 360 / 0.001° Control: OKUMA OSP-P300LA Rapid traverse X / Z / Y: 25 / 30 / 12.5 m/min Stroke: 1015 mm Spindle speed: 4200 rpm Ledpfont T Auox Ahushh Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm Toolholder: M-V12 with 12 stations Tool size: 25 x 25 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 - 6000 rpm Operating hours: 1,256 h Control on: 1,660 h MACHINE DETAILS Dimensions (L x W x H): 3,420 x 2,041 x 2,444 mm Weight: 6,600 kg Connection voltage: 400 V, 3 phase, 50 Hz Power consumption: 38.9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hob milling toolholder (see document in attachment) is not included in the scope of delivery.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 410 mm, stružna dolžina: 515 mm, premer struženja: 520 mm, izvrtina vretena: 66 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 250 mm, pomik po osi Z: 565 mm, skupna masa: 4.400 kg, Funkcija dialognega programiranja One-Touch IGF (vprašanje-odgovor) Model 2024 CNC stružnica OKUMA LB3000EXII Krmilnik OSP-P300LA Lhodoywhfiopfx Ahush Dodali smo katalog za vpogled. 2 osi Premer struženja: 520 mm Premer obdelave: 410 mm Dolžina obdelave: 515 mm Premer vretena: 66 mm Koničnik konjička: MT-5 Programabilen konjiček 5000 vrt/min Teža: 4400 kg Reference lahko damo v Nemčiji in Franciji.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 500 mm, premer struženja: 300 mm, izvrtina vretena: 75 mm, največja hitrost vretena: 3.800 obr/min, model krmilnika: OSP 5000L-G CNC-System, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stružnica z integriranim Okuma robotom! TEHNIČNI PODATKI Stružni premer nad podporo: 450 mm Stružna dolžina: 500 mm Stružni premer: 300 mm Vrtina glavnega vretena: 75 mm Hitrost vrtenja vretena: 70–3.800 vrt./min Moč glavnega vretena: 11 kW (30 min) / 7,5 kW stalni pogon Pomik X-osi: 400 mm Pomik Z-osi: 500 mm Hitri pomik X-osi: 12 m/min Hitri pomik Z-osi: 12 m/min Podajalna hitrost XZ: 12.000 mm/min Prenos podatkov: RS232 Revolver za orodje: 12 pozicij PODROBNOSTI O STROJU Krmiljenje: CNC sistem OSP 5000L-G Prenos podatkov: RS232 Revolver za orodje: 12 pozicij Napajanje: 3 × 400 V Nazivna moč stroja: 21 kVA Maksimalni tok obremenitve: 36 A Ledpfjzc E Dfex Ahuohh Dimenzije in teža Dimenzije (D (z odrezkom transporterjem) x Š x V): 3.900 x 1.800 x 1.800 mm Teža stroja: pribl. 4.500 kg OPREMA Integriran Okuma robot Avtomatsko podajanje obdelovancev Idealno za serijske in avtomatske stružene dele Stabilna in trajna konstrukcija

Stanje: rabljeno, Leto izdelave: 2012, CNC OSP U100L C Axis Capacity Max. turning diameter: 340 mm Max. turning length: 480 mm Distance between centers: 500 mm Axes X-axis travel: 280 mm Z-axis travel: 500 mm C-axis: 360° (0.001° increments) Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min C-axis: 200 rpm Incremental movement X/Z axes: 0.001 to 1.000 mm Spindle Spindle nose: ASA 6 Speed range: 45–3,800 rpm Power: 22 kW Bar capacity: 65 mm Electronic speed ranges: 2 Live Tooling Speed: 45–4,500 rpm Power: 3.3 kW Turret Type: V 12 NCM Stations: 12 Square tool section: 25 mm Boring bar section: 40 mm Tailstock Quill diameter: 90 mm Quill stroke: 120 mm Quill taper: MT5 Chip Conveyor Complete with: - VDI 40 turret - Kitagawa B208 power chuck - Chip conveyor - Air blast - Robot interface - High-pressure coolant pump - Automatic door - Various turning toolholder kit (external and internal) - 4 radial live tools - 4 axial live tools Machine supplied with CE certification and manuals Lsdpfx Aey Uvwzshushh All technical data provided are indicative and may be subject to change without prior notice and therefore should not be considered binding.

Leto izdelave: 1988, stanje: pripravljen za uporabo (rabljen), Vmesnik: RS232C, priključna moč: 21kVA, krmiljenje: Okuma OSP 5000 L-G, dolžina: 2900mm, širina: 1800mm, višina: 1720mm, teža: 4,5t, ležajna vretena X-osi ima 0,2mm zračnosti, redno vzdrževano, s transporterjem za ostružke. Možen je ogled na lokaciji. Lhsdpoy U Nq Usfx Ahueh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 280 mm, pomik po osi Z: 500 mm, moč vretenovega motorja: 22.000 W, število osi: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It offers a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust 12-station turret. If you are looking for a high-quality lathe, consider the Okuma LB 300M X 500 horizontal turning center we have for sale. Please contact us for further details. • CNC: OSP U100L Lhjdsy N Sabspfx Ahueh • Maximum turning diameter: 340 mm • Maximum turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increments) • Rapid traverse: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Driven tools: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: Quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional Equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blower • Driven tool holder • 4 radial driven tools • 4 axial driven tools Technical Specification: Taper size: VDI 40 Counter spindle: No Driven tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2001, CNC lathe Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Year of manufacture: 2001 2-axis CNC lathe with robotic loading Description: 2-axis (X-Z) lathe for short workpieces, equipped with a robotic workpiece magazine X-axis travel: 180 mm Ljdpfx Ahsk Hz Iwouehh Z-axis travel: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Stanje: dober (rabljeno), Deli, prikazani z roko, niso vključeni. Ledsyb R Erspfx Ahuehh

Stanje: rabljeno, OKUMA LB 200 M je CNC stružnica za visoko natančno, precizno in zanesljivo proizvodnjo. Kapacitete: Ø nad prečnim suportom 420 mm; nad posteljo 530 mm; vretenska odprtina 53 mm; max Ø 300 mm; pomiki Z 335 mm, X 180 mm. Podatki: hitra pomika X 25 m/min, Z 30 m/min; vrtljaji vretena 50–6000 min⁻¹; priklop 3x400 V 50 Hz; 16 kVA; teža 3300 kg; dimenzije 2035×1720×1700 mm. Oprema: 12-položni revolver; konjiček Morse 4, pomik pinole 80 mm, Ø 55 mm. Omogoča ozke tolerance; primerno za avtomobilsko, letalsko, medicinsko in strojno industrijo. Lhedpfx Ajyxnxxehujh

Stanje: rabljeno, OKUMA LB 2000 EX je CNC stružnica, zasnovana za visoko natančnost, točnost in zanesljivost. Zmogljivosti: vreteninska odprtina 62 mm; maks. dolžina struženja 300 mm; maks. premer struženja 430 mm; pomiki Z 350 mm, X 260 mm. Tehnični podatki: hitri pomik Z 30 m/min, X 25 m/min; brezstopenjsko območje vrtljajev vretena 50–6000 min⁻¹; priključek 50 Hz 3x 400 V; masa ≈3250 kg; dimenzije D1900׊1750×V1850 mm. Oprema: revolverska glava z 12 pozicijami. Omogoča obdelavo v ozkih tolerancah; tipične industrije: avtomobilska, letalska, medicinska tehnika, urarstvo, strojništvo. Ledpfx Asyxnxfshuohh

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina 2620 mm Mere dolžina 4865 mm Teža stroja 11700 kg Krmilna enota Znamka OKUMA Model n/a Glavni pogon Območje hitrosti vretena 3500 Vpenjalna konusnica ASA 8 Število osi 2 Pomiki Pomik po osi X 230 mm Lodex D R Rfopfx Ahuehh Pomik po osi Z 670 mm Revolver glava Vpenjalna konusnica VDI 40 Ta 3-osni stroj Okuma LB 25 II-M je bil izdelan leta 1998. Gre za robusten horizontalni stružni stroj z Okuma OSP 5020L krmiljem, ki omogoča hitrost vretena do 3.500 obr/min in revolversko glavo z 12 pozicijami za orodja. Omogoča obdelavo premera do Ø 420 mm in dolžine do 1.250 mm. Razmislite o nakupu tega horizontalnega stružnega stroja Okuma LB 25 II-M. Za več informacij nas kontaktirajte. Uporaba Struženje

Stanje: rabljeno, Description: Main Spindle: Technology: Motor spindle Speed: 4,200 rpm Power: 22 kW Torque: 427 Nm Spindle bore: 91 mm Through-hole cylinder: 86 mm C-axis: High-precision package Chuck: SMW KNCS-N 275-86 K8 Sub Spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 22 kW Torque: 420 Nm Spindle bore: 80 mm Through-hole cylinder: 77 mm C-axis: High-precision package Chuck: SMW BHD-FC 210-52-3 Tool Carrier X/Y/Z/B: Technology: Milling spindle Speed: 12,000 rpm Power: 22 kW Torque: 120 Nm Tool interface: HSK 63 Y-axis: 250 mm (+/-125 mm) B-axis: 240° Tool Magazine: Number of stations: 80 Equipment / Accessories: Position measurement: Direct in X/Y/Z-axes (glass scales) Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 70 bar Coolant temperature control: Deltatherm E4 Chip flushing: Machining area, hand gun Precision package: C-axes high-precision Software package: 5-axis auto-tuning Software option: Multi-function tool Gear machining software: Hobbing, Power skiving CNC extension: Conversational programming Workpiece measuring: Renishaw probe Tool measurement: Tool setter Tool breakage monitoring: Renishaw TRS2 B-axis: NC function and turning function Bar feeder: LNS Quickload Servo III+ Automation preparation: Robot interface Lhsdpowu I Irjfx Ahueh Work area door: Automatic Setup operation: Electronic handwheel