Hss nakup rabljenega (306)

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Knjdpofk Aivofx Ah Djc Table length: 1950 mm Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!!

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 31.663 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.640 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 90 m³, prva registracija: 12/2017, Leto izdelave: 2017, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Schmitz SpeedCurtain na obeh straneh * DEKRA certificirano po VDI 2700 ff in DIN EN 12642 Code XL * 2 vrsti pritrjevanja tovora * Škatla za palete * Schmitz SaftyRoof * Drsna streha * Dvojna zadnja krilna vrata * Kolutne zavore Ksdpfx Ahow Sbufo Djnc * Zračno vzmetenje Na voljo 2 kosa

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 32.340 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, naslednji pregled (TÜV): 07/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point load Fifth Wheel Coupling * 2-inch kingpin Rear Underrun Protection * Bolted version, compliant with EU standards Side Underrun Protection * Compliant with EU standards Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right in direction of travel Axles * 3 x 9 t air suspension axle assemblies * Disc brakes * Manufacturer: Gigant Brake System * Two-line compressed air brake system according to EU standards with EBS and RSS * Automatic load-dependent control Knedpfx Ahewbb Ufs Doc * Spring brake cylinders as parking brake * Non-interchangeable coupling heads mounted solidly on front cross member, without connection line to the truck * Manufacturer: Wabco Tyres * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 steel rims Mudguards * In accordance with EU standards * PVC mudguards before and after axle assembly Spare Wheel Carrier * 1 unit twin basket with mounting kit for one spare wheel with ET 120 Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.5 t * On the outer frame, drill holes for lashing straps every approx. 500 mm Front Wall * Reinforced steel construction, fixed * Inside lined with approx. 9 mm phenolic resin plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting System * In accordance with EU standards, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline marker lights at rear * Number plate lights * 1 x 15-pin and 2 x 7-pin plug sockets on the front cross member Paintwork * Chassis and front wall blasted, primed, and painted in single color * Chassis: RAL 3002 Carmine Red * SSV: aluminium anodized * Rear underrun protection: white (RAL 9010) * Add-on parts: galvanized/KTL black * Rims: silver Optional Equipment * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets transverse to the cargo area * 20 stakes made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stakes inside front wall * 5 x 25 side walls and rear wall made of anodized aluminium hollow profiles, approx. 600 mm high, foldable and removable * Removable Kinnegrip stakes * Insertion rails for side walls and stakes under the chassis left and right * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system Knodpfxetwlwzj Ah Dec >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: dober (rabljeno), Leto izdelave: 2002, obratovalne ure: 15.000 h, Funkcionalnost: popolnoma funkcionalen, For sale: 1 used punching press including gripper feed unit Manufacturer: Mabu Pressen AG Model: 32HSS Kjdpfxotttcdj Ah Dsnc Gripper feed unit: RC11 Year of manufacture: 2002 Operating hours: approx. 15,000 Press force: 320 kN Strokes per minute: 100 - 1000 Stroke adjustment: 5 - 40 Weight: 6,200 kg Further technical data can be found on the nameplate and in the photo documentation. Including complete documentation. Additional photos and video available upon request. The press can be inspected at our warehouse in 09599 Freiberg.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 4.504 h, BHS Impact Mill PM 0806 in good condition including many spare and wear parts Throughput capacity up to 40 t/h Maximum feed size: 250 mm Feed opening: 650 x 600 mm Drive power / Motor: 55 kW Knsdpfowcatiox Ah Dec Application area: for soft to medium-hard rocks, oversized gravel, fireclay, refractory material, bricks, concrete Additional photos available. Inspection possible at any time.

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 288 kg Special workbench systems from the SST, SFT and SWT series (fixed series) serve as 3D clamping workstations for the efficient production of assemblies, welded structures, and bonded constructions, e.g. jigs, railings, frames, etc. With the help of the extensive range of clamping accessories (see welding table accessories catalog section), these table systems can also be used as flexibly configurable fixtures, thus enabling the high-quality production of small and medium series. Ksdpfx Ahogrvwfs Djnc The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. In addition, the table top is marked with a 100 x 100 mm grid for easy alignment of workpieces or fixtures. The table perforation allows for the use of various clamping elements and positioning aids. For special applications, the table top surface can, as an option to the standard, also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures long-term sustainability of the table system. Price must be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 31.663 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.640 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 90 m³, prva registracija: 12/2017, Leto izdelave: 2017, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, * Schmitz SpeedCurtain na obeh straneh * Dekra certifikat po VDI 2700 ff in DIN EN 12642 Code XL * 2 vrsti varovanja tovora Knodpfx Ahjw Sburs Doc * Škatla za palete * Schmitz SaftyRoof * Drsna streha * Dvojna zadnja krilna vrata * Kolutne zavore * Zračno vzmetenje Na voljo 2 kosa

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 32.610 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website. Excerpt from the equipment list. Full specifications available on request. Knodpfx Aswyhy Esh Djc Chassis: * Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads Coupling System: * 2-inch kingpin Underrun Protection: * Bolted design, compliant with EC regulations Side Guard: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right Axles: * 3 x 9 t air suspension axle units * Disc brakes * Make: Gigant Brake System: * Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution * Spring brake cylinders as parking brake * Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit * Make: Wabco Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Holder: * 1 double basket with mounting kit for a spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t * Outer frame drilled approx. every 500 mm for lashing straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Lighting System: * EC compliant, 24 volt, with multi-chamber tail lights * LED side marker lights * LED front position lights (white) * LED rear outline lights * Number plate lights * 1x 15-pin and 2x 7-pin sockets on front beam Painting: * Chassis and front wall cleaned by sandblasting, primed, and painted in solid color * Chassis: RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm * Interior of the front wall with magazine for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locks for 1 x 20' container centered * Work lamp on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, Table height: 650 - 1050 mm; Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm; Table width: 1230 mm; Table length: 2480 mm; Approx. weight: 555 kg. This allows the user to flexibly adjust the working surface height to meet specific requirements, improving both efficiency and ergonomics. The height adjustment is performed as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. When used in conjunction with machining equipment, inspection or reworking fixtures (such as deburring, marking, or testing) can be adapted precisely to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems have proven ideal for the maintenance of injection moulding and die casting tools, thanks to their various mounting and securing options. Once removed from the machine, tools can be safely serviced on-site and transferred to maintenance for repairs as needed. The fully bolted construction of the clamping plate allows for cost-effective replacement of the working surface in case of wear. Price must be confirmed with the manufacturer before ordering! Knedjfk Aicspfx Ah Doc

Stanje: novo, skupna masa: 50.960 kg, največja dovoljena obremenitev: 41.120 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from equipment features. Full specifications available upon request. Chassis * Welded construction made from high-quality steel profiles with through cross-members, designed for high floor or point loads * Cranked design with heavy-duty outer frame * UNP rail at the rear as support for loading ramps Coupling Device * 2-inch kingpin, replaceable from below Underrun Protection * Fixed installation compliant with EC regulations Landing Legs * 2 x 12 t aluminum fall supports * 2 pcs. fall supports at the rear Axles * 4 x 9 t Gigant axles (technically possible), with approx. 300 x 200 mm drum brakes, AGS, ABS * Centered wheel connection for twin tires * Total air suspension travel approx. 200 mm, with 140 mm lift and 60 mm lowering * Air suspension lifting and lowering control via air suspension valve with locking function Lift Axle * 1st axle can be lifted, control on chassis frame Steering * 3rd and 4th axles self-steering * Automatic reversing lock via reverse light, also speed dependent and switchable Brake System * Two-line Wabco brake system, EC-compliant, with EBS and automatic load-dependent control * Spring-loaded parking brakes acting on 2 axles * Reverse-polarity-protected coupling heads fixed to the front cross-member, without connecting line to tow vehicle Tires * 16 units, 205/65R17.5, on 6.00x17.5 rims Mudguards * EC-compliant, 1/4 PVC mudguards in front of and behind the wheels Spare Wheel Holder * 1 piece for trailer tires, without spare wheel Lighting System * EC-compliant, 24 Volts * Multi-chamber taillights * License plate light * Side marker lights * White front position light and tracking lights at the rear * Socket 1x15- and 2x7-pin on the front wall Load Securing High Bed * 5 pairs of foldable lashing rings on the outer frame, evenly distributed, tractive force approx. 8 t Load Securing Low Bed * 9 pairs of foldable lashing rings on the outer frame, evenly distributed, tractive force approx. 8 t * 1 pair foldable, recessed lashing rings in front of the crank bulkhead, tractive force approx. 8 t * 1 pair foldable, recessed lashing rings in front of the rear head frame, tractive force approx. 8 t Centre Stakes * Each side with 3 sliding stakes with four positions each * Centre posts longitudinally movable over full length incl. telescopic extension Insert Pockets for Battens * 1 collective pocket below, approx. 450 mm high, above that 4 (upper deck) or 3 (lower deck) single insert pockets evenly distributed Insert Battens * 3 rows aluminum V-insert battens (upper deck) * 4 rows aluminum V-insert battens (lower deck) Floor * Hardwood floor set flush in the outer frame Front Wall * Fixed corner stakes with approx. 25 mm aluminum hollow profiles, roof-high * Interior lined with approx. 9 mm phenolic resin board (approx. 1,250 mm high) Knodpfx Ajwfvvxjh Dsc Rear Wall * As 2-wing portal door, sandwich construction with 4 internal lock rods * 2 door retainers * Swiveling portal carrier * Steel collision guard below lock rods Portal Widening * Rear portal hydraulically extendable to a width of approx. 4,550 mm (approx. 1,000 mm each side) via hand pump, individually left/right (for loading/unloading only) Sliding Roof * Sliding roof opens from rear to front as well as from front to rear (without end-run carriage, front tarpaulin fixed with socket lug and oval eyelet) * Throughg

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1980 x 1480 x 800 mm Table width: 1480 mm Table length: 1980 mm Weight approx.: 481 kg Special workbench systems of the SST, SFT and SWT fixed series are 3D clamping workstations designed for efficient manufacturing of assembly, welding, and bonding structures, such as fixtures, railings, frames, etc. With the help of a comprehensive range of clamping accessories (see catalog section Welding Table Accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the table top includes a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows the use of a wide variety of clamping elements and positioning aids. For specific applications, the table surface can be optionally supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, instead of the standard. Thanks to the fully bolted design of the clamping plate, the work surface can be economically replaced in case of wear. This ensures the table system remains particularly sustainable in long-term use. Price must be requested from the manufacturer prior to ordering! For accessories and more information, please follow this link: Kjdpsfk Aimjfx Ah Donc

Stanje: novo, skupna masa: 48.000 kg, največja dovoljena obremenitev: 40.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from equipment. Complete equipment list upon request. Chassis: * Welded construction made from high-grade steel profiles in lightweight design with punched-through cross members * Rear taper approx. 630 mm long and front frame lowered by approx. 100 mm * At the rear of the chassis: excavator arm recess, approx. L 3,750 x W 640 x H 290 mm, located between the longitudinal beams with a steel tread-plate floor Wheel recesses: * In the lowered bed, approx. 1,700 mm ahead of the 1st axle, a pair of wheel recesses (support/surface under the ramps), approx. H 190 x L 1,550 x W 800 mm, incl. flat aluminium (climbing aid) * Additional pair of wheel recesses between the 1st and 2nd axle, approx. H 190 x L 1,080 x W 800 mm, incl. flat aluminium (climbing aid) * All wheel recesses with aluminium covers and steel tread-plate floors Coupling system: * 2-inch king pin Landing legs: * 2 x 12 t drop-type landing legs with aluminium compensating foot Rear supports: * Two adjustable drop supports Axles: * 3 x 10 t air-sprung axle units, brand SAF, with drum brakes approx. 300 x 200 mm * Automatic slack adjusters * ABS * Centrally mounted wheel connection for twin tyres * Total air suspension lift approx. 200 mm, raise approx. 140 mm, lower approx. 60 mm, control for raising/lowering via air spring valve with locking function Lift axle: * 1st axle liftable, controlled from chassis frame Steering: * 3rd axle self-steering with manual and automatic reverse lock Brake system: * Two-line compressed-air brake system per EC, with EBS and RSS * Spring-loaded cylinders acting as parking brake on two axles * Coupling heads fixed to the front cross member, reversal-proof, designed per EC, without connection lines to tractor unit Tyres: * 12x 235/75 R17.5 - brand of our choice, mounted on 6.75x17.5 rims with offset Mudguards: * Per EC, 1/4 PVC mudguard Floor: * Wooden floor recessed into outer frame. Over the wheels with steel tread-plate cover Load securing upper deck: * 4 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Knodjvl N N Hspfx Ah Dsc Load securing low deck: * 8 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * 4 pairs of folding lashing rings recessed into the longitudinal beams of the chassis, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Stake pockets upper deck: * 4 pairs of stake pockets in the outer frame, evenly distributed Stake pockets low deck: * 6 pairs of stake pockets in the outer frame, evenly distributed Insertable stakes: * 20 stakes made of galvanized tubing approx. 80/50 mm, total length approx. 1,000 mm Front wall: * Bolted, fixed steel corner stakes filled with approx. 25 mm aluminium hollow profiles Drop-in sideboard for upper deck: * Each side at the front with a drop-in sideboard made from approx. 400 x 25 mm aluminium hollow profiles, length approx. 2,400 mm, removable, insertion pocket at the front on the front wall stake, rear in extra stake pockets approx. 80/50 mm * Additional drop-in sideboard approx. 400 x 25 mm between the rear extra stake pockets for rear load securing Ramps: * 2 spring-assisted aluminium ramps, loadable up to approx. 32 t when supported * Ramps secured with over-center latch Lighting: * Per

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 358 kg Knedpsfk Ai Aefx Ah Doc This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is achieved as standard via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available on request). The worktop, as with the SST Fix series, also features a 100 x 100 mm Ø 28 perforated grid. When used in combination with processing machines, inspection or reworking fixtures (deburring, marking, checking) can be adapted to match the clamping table height of the machine. The table systems are easily relocated using a pallet jack. These mobile systems, with various fastening and securing options, have proven to be ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, skupna masa: 39.000 kg, največja dovoljena obremenitev: 32.340 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and soon available vehicles on our website. Excerpt from the equipment. Full specification on request. Chassis: * Welded construction made from high-quality steel profiles with punched profile cross-members, designed for high point loads Towing device: * 2-inch king pin Landing legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right in driving direction Axles: * 3 x 9 t air suspension axle units * Disc brakes * Manufacturer: SAF, with disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel studs, 10-hole with ET 120 * Total air suspension travel approx. 200 mm, of which raise approx. 140 mm and lower approx. 60 mm, controlled by rotary slide valve with detent function Brake system: * Two-line compressed air brake system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads securely mounted to the front cross-member, without connecting line to the tractor unit Tyres: * 6-x 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, manufacturer of our choice Mudguards: * According to EU regulations, ? PVC mudguards in front of and behind the axle units Spare wheel carrier: * 1 piece double basket with mounting material for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, traction approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, traction approx. 2.5 t * In the outer frame approx. every 500 mm a hole for tie-down straps Front wall: * Reinforced steel structure, fixed * Interior lined with approx. 9 mm phenolic-coated plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting system: * According to EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED contour lights rear * Licence plate lights * 1x 15- and 2x 7-pin sockets at the front cross-member Equipment: Kjdpewx Db Ajfx Ah Djnc * ECE 70 warning plate * Bracket for rotating beacon (without beacon) Painting: * Chassis and front wall sandblasted, primed, and painted in one colour * Chassis: RAL 3002 carmine red * Dropsides: anodised * Dropside stanchions: RAL 3002 carmine red * SSV: Aluminium anodised * Hubs: Cataphoretic dip primed (KTL) * Rear underrun guard: white (RAL 9010) * Mounted parts: galvanised/KTL black * Rims: silver Accessories: * First axle liftable, with fully-automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly spaced * 4 rows of stanchion pockets across the loading platform * 20 stanchions made of galvanised tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside front wall * Dropsides: 5 x 250 mm aluminium hollow profile dropsides and rear wall, anodised, foldable and removable, detachable Kinnegrip stanchions * Dropside and stanchion magazine: left and right under chassis slide-in rails for dropsides and stanchions * Container locks for 1 x 40? and 2 x 20? containers rear flush, container locks for 1 x 20? container in the middle * Worklight at lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 630 kg Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for the efficient production of assembly, welding, and adhesive constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalog section: welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small to medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick working surface equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, in deviation from the standard. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of wear. This design makes the table system especially durable and sustainable in use. Price must be reconfirmed with manufacturer before ordering!! Knsdpefk Ailefx Ah Dec

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website. Extract from the specification. Full equipment list available on request. Chassis: * Welded construction using high-quality steel profiles with through cross members, designed for high point loads * Underrun nose width approx. 700 mm * Outer frame as UNP profile * Scuff plate approx. 8mm * Neck height at the front approx. 130 mm Towing Equipment * 2-inch kingpin Underrun Protection * Bolted version, compliant with EC regulations Side Impact Protection * According to EC, made from anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation on front right Axles * 3 x 9 t air suspension axle units * 22.5" disc brakes * Total stroke approx. 180 mm * Lifting and lowering device operated by rotary slide valve Braking System * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake Kedpfjugqvfjx Ah Denc * Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120 * Brand of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards * According to EC Spare Wheel Carrier * Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t * Holes for lashing straps in the outer frame at approx. 400-600 mm intervals Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm Floor * Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles Lighting System * According to EC, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline marker lights, rear * License plate lights * Lane marker lights, LED * 1x15- and 2x7-pin socket connectors on the front crossmember Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Holder for rotating beacon including rotating beacon * 2 rubber buffer stops at rear * Foldable and extendable access ladder at the rear right (without platform) * 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles Paintwork * Front wall: single RAL color of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + single RAL color of your choice * Side protection: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Wheel rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets transversely to loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stanchions on inside of front wall * Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear * Container locks for 1 x 20’ container centered * Work light at lamp bracket (activated in reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 285 kg Special workbench systems of the SST, SFT, and SWT Fix series serve as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, e.g., jigs, railings, frames, etc. With the help of an extensive range of clamping accessories (see catalog section Welding Table Accessories), these table systems can also be used as flexibly reconfigurable jigs and thus enable high-quality production of small and medium series. Kedjfk Aiwopfx Ah Djnc The special workbenches are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. Additionally, the table top features a 100 x 100 mm grid marking for easy alignment of workpieces or jigs. The hole matrix allows the use of various types of clamping elements and positioning aids. For special applications, the worktop surface, deviating from standard, can also be optionally fitted in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Due to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of wear at a later stage. This makes the table system particularly sustainable and long-lasting. Price must be reconfirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: rabljeno, skupna masa: 42.000 kg, največja dovoljena obremenitev: 34.070 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 92 m³, prva registracija: 01/2024, naslednji pregled (TÜV): 02/2026, skupna širina: 2.550 mm, Oprema: ABS, Our full vehicle inventory, including vehicles available for immediate or short-term delivery, can be found on our website. Extract from the equipment list. Full specification available on request. Vehicle * The trailer is built on a self-supporting chassis made of high-quality S700 steel * The frame runs from the landing legs to the rear * 2-inch kingpin, mounted on an approx. 10 mm thick saddle plate St 52-3 * Saddle plates for max. fifth wheel load 15,000 kg Axles * 3 x 9 t Knapen HD axles, rigid, with approx. 430 mm disc brakes, 10 studs ET 120 * Standard control panel with pressure gauges and suspension controls, positioned left in front of the axles * First axle is a lift axle, fully automatic via EBS, incl. start aid (3x brakes) * Remote control Tyres and Rims * 6 x steel rims * 6 x tyres 385/65 R22.5 Mounted parts * Steel landing legs with tiltable base, max. static load: 50 t, max. lifting load: 24 t * 6 x semi-circular mudguards * Anti-spray mats mounted behind the 3rd axle * Standard lighting board + cover flap * Rear end carrier * Fixed splash guard underneath the bumper * Bumper according to R58-03. Height approx. 375 mm, ground clearance approx. 450 mm * Plastic toolbox with lower hinge, dimensions approx. 1,000 x 500 x 500 mm, positioned left rear of axles * Aluminium side underrun protection, open design, foldable according to EEC regulations * One long ladder, mounted behind the side underrun protection or under the trailer * One extendable ladder with platform for easy entry, mounted on the rear of the trailer * 2 wheel chocks, position: 2x left * Broom and shovel holder, mounted right in front of the axles Floor * CARGOFLOOR CF 500 SL-C system * The CARGOFLOOR system is equipped with E-Control * Smooth aluminium floor boards, approx. 10 mm, 21 boards * The floor boards are equipped with aluminium end caps * Stainless steel plate mounted at the rear underside for additional wear protection Front wall * The largest platform on the market is mounted on the front wall * 2 ladders on the front wall, positioned left and right * A door is mounted in the front wall for easy access to the front of the trailer, position: left – opens outwards Moving partition wall * For complete emptying, the trailer is equipped with an aluminium moving partition wall, with a brush to prevent contamination of the guide rails * Ground clearance approx. 100 mm Side walls * Extra-strong top rail profile with tracks for the moving partition wall * Top rail profile with notch for the keder rope of the sliding tarpaulin * The side walls consist of approx. 3 mm inner side and approx. 2 mm outer side * The side walls are continuously welded over the full height (inside) for maximum strength and minimal contamination * Welding is performed via a high-quality, fully automated welding process * Incl. side protective tarpaulin left side Rear * The rear doors are fully welded from wall and frame profiles for extra strength * Doors are equipped with a pneumatic safety lock for safe unloading * Through-loading height with closed top rail at rear approx. 2,665 mm * Single heavy-duty stainless steel locking bar per rear door Top rail * Steel top rail with wedge Roof bows * 4 pieces Kjdswqlg Ropfx Ah Dsnc

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1980 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1980 mm Approximate weight: 491 kg Kodofk E Dzjpfx Ah Dsnc This allows the user to flexibly adjust the working surface height to the respective requirement in order to improve efficiency and ergonomics. Height adjustment is standardly accomplished via a manual hydraulic system within a range of 650 to 1050 mm (other ranges available upon request). Like the SST fix series, the worktop features a 100 x 100 mm Ø 28 mm hole grid. Used in combination with processing machines, inspection or finishing fixtures (deburring, marking, testing) can be adjusted to the height of the machine’s clamping table. The table systems can be easily relocated on site using pallet trucks. These mobile systems have proven ideal, with various clamping and securing options, for the maintenance of injection molding and die-casting tools. Tools can be safely maintained immediately after removal from the machine and then transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively if wear occurs later on. Table 2 below provides an overview of the available standard models. Prices must be confirmed with the manufacturer prior to ordering!!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1480 x 1480 x 800 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 332 kg Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient assembly, welding, and adhesive structure production, e.g., for fixtures, railings, frames, etc. With the comprehensive range of clamping accessories (see catalog section Welding Table Accessories), these table systems can also be used as flexibly adjustable fixtures, allowing high-quality production of small and medium-sized batches. Knsdpfx Ajgrz Tpjh Dsc The special workbenches feature a worktop with either a 16 mm (dual standard) or 25 mm (triple 24+1) thickness, equipped with a Ø28 mm hole grid. Additionally, the tabletop has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The perforations in the table allow the use of various clamping elements and positioning aids. For special applications, the tabletop surface can optionally be supplied made of stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, instead of the standard finish. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced affordably in case of wear, ensuring the table system remains sustainable and long-lasting. The price must be confirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Knjdpogrz Tlsfx Ah Djc Dimensions (LxWxH): 1480 x 1480 x 650 to 1050 mm Table width: 1480 mm Table length: 1480 mm Weight approx.: 464 kg This system allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic mechanism in the range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on-site using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for maintenance of injection molding and die-casting tools. Immediately after removal from the machine, the tools can be safely serviced on site and transported for repairs to maintenance. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1400 x 900 x 800 mm Table width: 900 mm Table length: 1400 mm Knedpfxefk Aitj Ah Doc Weight approx.: 235 kg Special workbench systems of the SST, SFT, and SWT fixed series as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, e.g. fixtures, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly configurable fixtures, thus enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The grid of holes allows the use of a wide variety of clamping and fixing elements. For specific applications, the tabletop surface can, as an option and deviating from the standard, also be equipped in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Thanks to the fully bolted design of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures that the table system remains particularly sustainable and long-lasting. Price must be reconfirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Knodpfx Aegrvv Tjh Dsc Table width: 950 mm Table length: 1450 mm Approx. weight: 308 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is standardly effected via a manual hydraulic system, with a range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on site using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die casting tools. After removal from the machine, tools can be safely serviced on site and then transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1400 x 900 x 650 to 1050 mm Table width: 900 mm Kjdjgrvwbopfx Ah Dsnc Table length: 1400 mm Approx. weight: 305 kg This allows the user to flexibly adjust the working surface height according to specific requirements to improve efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other heights available upon request). The table systems can easily be relocated onsite using a pallet truck. These mobile systems have proven ideal due to their various fastening and securing options for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced onsite and then transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be requested from the manufacturer prior to ordering!