Hq 500 nakup rabljenega (38.304)

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), A complete Heat and Control line for frying extruded snacks is available. Components include: product feeding system, vibrating system for product feeding and removal of particles, fryer, filter for removal of burnt particles, oil heating system with burner, oil tank, oil return system, chimney, and control cabinet. Frying capacity: 500 kg/h, total line length: approx. 10,000 mm, total line height: approx. 3,500 mm. Spare parts are included. Documentation is available. On-site inspection possible. Expected to be available from August 2025. Prsdpowdwy Nefx Aafoc

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining centre for milling, drilling, cutting, and edgebanding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edgebanding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - 1200 mm LED setup assistance for vacuum cup (sleeve) positioning (Y-axis) 1 vacuum pump (capacity 140 m³/h) Safety enclosure for working head, safety foot mats Chip conveyor No. 2 vertical main spindles (milling units), HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (disc changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Podpfx Aajfbmqtjforc Edgebanding unit – gluing module (hot melt glue) VT 50 Edge magazine for rolls (6 compartments) OPTIONAL: 1 adapter unit for saw, fixed 90 degrees, max diameter 200 mm 1 adapter unit for flush milling and profile pull blade 1 adapter unit horizontal drilling & milling head (cross head) with 4 horizontal spindles

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, SIEMENS 828D control with Shopturn, 17-inch touch screen Swing diameter over bed: 550 mm Maximum machining length: 428 mm Maximum machining diameter: 300 mm Spindle bore: 62 mm Bar machining capacity: 51 mm Spindle nose: A2-6 Spindle speed range: 35 - 5,000 rpm (motor spindle) X-axis travel: 210 mm Z-axis travel: 561 mm Tool changer for driven tools: 12 positions Tool changer locking: hydraulic Tool changer drive: servo Tool change time: 0.2 seconds Tool holder: 25 x 25 mm Driven tool max. speed: 5,000 rpm Driven tool max. power: 5 kW Max. milling capacity (shank cutter): 16 mm Max. milling capacity (face mill): 50 mm Max. drilling capacity: 16 mm Max. thread cutting capacity: M16x2 Rapid traverse Z-axis: 30 m/min Rapid traverse X-axis: 30 m/min Positioning accuracy: 0.008 mm Repeatability: 0.003 mm Tailstock: optionally programmable tailstock Quill taper: Morse taper 4 Tailstock travel incl. quill stroke: 565 mm Hydraulic unit tank capacity: 20 liters Prjdpfx Aswbu T Usafsc Hydraulic unit pump capacity: 1.5 kW Hydraulic unit nominal pressure: 3.5 - 6 MPa Central lubrication tank capacity: 2 liters Central lubrication output: 25 W Coolant tank capacity: 130 liters Coolant pump output: 25 W Continuous motor power: 11 kW, 400 V, 50 Hz Short-term motor power (30 min): 15 kW, 400 V, 50 Hz Weight: 4,000 kg Dimensions: 2,600 x 1,685 x 1,768 mm Accessories, Equipment Coolant system, tool changer for 12 driven tools, 200 mm hydraulic power chuck, linear guides and ball screw from THK/Japan, Siemens 828D control, spindle cooling, chip conveyor, workpiece measurement, automatic tool length correction, bar feeder, air blow function for tool changer and lathe chuck, spindle, high-pressure cooling, oil skimmer, part catcher.

Stanje: novo, Leto izdelave: 2025, Semi-automatic case making machine KROMES type TO - 800/500 Semi-automatic machine for the production of hard covers, operable by a single person. The operator inserts the precut cover material, cut to the required size, onto rollers applying either cold or hot glue. If needed, the cover material is positioned against stops which facilitate precise placement of the board; after this operation, the case is passed between rollers, where it is drawn in and returns to the table with two sides turned in. Next, the cover is rotated 90 degrees and fed again between the rollers; the cover can then return to the table or be ejected onto a tray located on the opposite side of the machine. Operating parameters: - Maximum format: 800x500 mm - Minimum format: 140x140 mm - Output: 100-150 pcs/h - Cover material weight: 80 - 170 g Pjdpfshgw H Usx Aaferc - Board thickness: 1.2 mm - 4 mm Suitable cover materials: - Laminated paper - Bookbinding fabrics - Bookbinding paper covers Technical specifications: - Power supply: 3 phase, 400V 50Hz - Installed power: 3.7 kW - Power consumption: approx. 1 kW/h - Weight: 250 kg - Machine width: 1400 mm - Folded length: 1000 mm - Total height: 1000 mm - Adjustable glue roller speed - Assembly table with vacuum - Separate tanks for cold and hot glue - 2 separators, 10 mm thick - CD with control software + USB cable Made in Europe. Technical condition: brand new machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 7.562 h, stružna dolžina: 515 mm, premer struženja: 366 mm, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, največja hitrost vrtenja: 6.000 obr/min, skupna višina: 2.120 mm, skupna dolžina: 2.705 mm, skupna širina: 2.000 mm, skupna masa: 5.500 kg, CNC Control: Mitsubishi M-720BM (MAPPS 2) Capabilities Travel X-axis mm: 260 Travel Z-axis mm: 590 Travel B-axis mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross slide mm: 755 Bar working capacity mm: 52 Upper Turret Number of tool stations: 16 Max. speed, driven tools rpm: 6,000 Driven tool power kW: 5.5/5.5/3.7 (3min/5min/cont) Driven tool indexing sec.: 0.25 Main Spindle Max. spindle speed rpm: 6,000 Prodpfsu T H Dxex Aafoc Spindle drive power kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Sub-Spindle Max. spindle speed rpm: 6,000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow chuck (6") Manufacturer: KITAGAWA Coolant System Tank capacity liters: 235 Equipment Chip conveyor Signal beacon High-pressure pump Foot switch (double) for main and sub-spindle Interface for bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Machine Operating Time: Nominal power rating kVA: 27.4 Base Machine: Dimensions/Weight Length mm: 2,705 Width mm: 2,000 Height mm: 2,120 Weight kg: 5,500

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Aurelia 500 Psdpfx Aaowb Uq Hjfjrc 4 colors, alcohol damping (computer-controlled)

Leto izdelave: 2023, Stanje: pripravljen za uporabo (rabljen), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500 mm, constant zone: 160 mm, recommended tube diameter/length: 70 mm/750 mm, power: 3 kW, dimensions (X/Y/Z): 650 mm/500 mm/510 mm. Documentation available. Pedpfstxb Apox Aafjrc

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, skupna masa: 1.500 kg, Professional scissor lift grinding table with integrated fume and dust extraction. Used for grinding, polishing, soldering, welding, and manual tool cleaning processes. Features a built-in metal pre-filter that separates larger dust particles and metal shavings, also acting as a spark trap to prevent sparks from reaching the filter. The table can be raised electrically. Equipped with rollers and pneumatic connections for tool integration. The extraction system is fitted with new filter cartridges. Built-in table lighting. The device is in very good condition. Prsdpfxjv Tbaao Aafec Specifications: Extraction capacity: 3,000 m³/h Vacuum: 2,400 Pa Year of manufacture: 2011 Worktable dimensions: Width: 1.90 m Depth: 0.80 m Overall dimensions: Worktable: Length: 2.10 m Depth: 1.40 m Height: 2.30 m Extraction unit: Length: 1.20 m Width: 1.00 m Height: 2.35 m Total weight: 1,500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Splošni podatki Mere širina: 2050 mm Mere globina: 2695 mm Mere višina: 2120 mm Teža stroja: 5800 kg Podpfx Aaswvmz Tjferc Glavni pogon Moč motorja vretena: 15/15/11 kW Dodatna oprema Število orodnih pozicij: 12 (10) Višina držala za štirioglatno orodje: 25 mm Premer držala za vrtalno palico: Glavno vreteno: Max 50 mm / Podvreteno: Max 32 mm Čas preklopa revolverja: 0,25 s Največja hitrost pogonjenih orodij: 6000 min⁻¹ Pogonjena orodja in Y-os (model SY): Omogoča rezkanje in vrtanje; omogoča ekscentrično rezkanje Vlečna naprava za palice in gantry nakladalnik: s 20-pozicijskim magazinom / Sistem za odsesavanje prahu: LTA sistem / Dodatni rezervoar: 500 litrov / Knoll črpalka: 80 barov tlaka Ta 4-osni stružno-rezkalni center MORI SEIKI NL 2000 SY /500 je bil proizveden leta 2008. Idealen za precizno obdelavo, se ponaša z robustno zasnovo in naprednim krmilnim sistemom. Izkoristite priložnost za nakup stružno-rezkalnega centra MORI SEIKI NL 2000 SY /500. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Control: SIEMENS Predpfelawaksx Aafec Swing diameter over bed: 350 mm Turning diameter: 180 mm Distance between centers: 500 mm Spindle speed: 4000 rpm Tailstock Multifix quick-change tool post Accessories

Stanje: delavnici obnovljeno (rabljeno), Completely overhauled cylindrical grinder for external and internal grinding LŽT Kikinda, model AFB 300/500 and UFB 300/500 Pjdjv Tav Tspfx Aaforc Machine specifications: - Center height: 135 mm - Distance between centers: 300/500 mm - Through workpiece diameter: 270 mm - Grinding length: 300/500 mm - Maximum workpiece weight: 10 kg - Maximum workpiece grinding diameter: 100 mm - Machine accuracy over 300/500 mm length: within 5 microns - Cross slide repeatability: up to 5 microns - Electrical components by ABB, Schneider - Final painting in color according to customer preference Warranty on performed works: 6 months Delivery time: to be agreed For more information, please call.

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Cambio 500 debarking system consisting of: Infeed centering device. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. Feed speed 80 m/min. Hydraulic rotor and feed rollers. Predpfx Aaewxdimefsc Outfeed control unit. Tilting bin for long timber. Spare parts.

Stanje: novo, Aircraft AIRPROFI 1003/500/10 H Silent Piston Compressor For professional and industrial use where a quiet working environment is required. DESCRIPTION - Extremely quiet operation thanks to sound-insulated housing and additional silencer at the intake filter - Suitable for installation in noise-sensitive areas and directly at the workplace - Two-cylinder high-performance cast iron unit with low speed ensures exceptionally smooth and low-vibration operation: less wear and longer service life - Large cooling fan on the compressor and temperature-controlled radial fan on the housing provide optimal cooling of the entire interior - Intercooler and aftercooler, as well as an additional air duct between the motor and compressor, reduce condensate formation - High-quality Condor pressure switch - Equipped with glycerine pressure gauge, operating hours counter and fault indicator via LED lights - High-quality electric motor with motor protection switch and start-up relief - Integrated phase monitoring - Provision for easy belt tensioning - Service-friendly design - Ready for connection with all fittings and safety devices - Models with air receiver: hot-dip galvanized inside and outside, 15-year warranty against rust-through General Information Air outlet ¾" Dimensions & Weights Length (product) approx. 2020 mm Width/depth (product) approx. 980 mm Height (product) approx. 1840 mm Weight (net) approx. 410 kg Pjdpfx Aajt H N Nljfjrc Electrical Data Mains voltage 400 V Mains frequency 50 Hz Output power 7.5 kW Input power 8.71 kW Noise Emission Sound pressure level Lp 64 dB(A) Sound pressure measured at 1 m distance according to DIN 45635 T 13 Compressor Compressor system: HOS Intake capacity: approx. 1080 l/min FAD (Free Air Delivery): approx. 770 l/min (at 6 bar working pressure) Number of cylinders: 2 Number of compression stages: 2 Compressor speed: 1100 min¯¹ Air Receiver Maximum pressure: 10 bar Tank capacity: 500 l EQUIPMENT Drive transmission: V-belt Compressed air piping material: Flexible armored hose with heat insulation Compressed air extraction: Ball valve Air receiver: Hot-dip galvanized inside and out with fifteen-year anti-corrosion warranty AD 2000 compliant: Yes Tank base: Vibration dampers Star-delta starter: ✔

Leto izdelave: 2005, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, – Polish made – DTR manual included – Used machine, in very good condition Prodewu U Ifspfx Aafoc TECHNICAL SPECIFICATIONS: – Max. log diameter: 320 mm – Min. log length: 1600 mm – Number of spindles: 2 units – Spindle diameter: 70 mm – Spindle working length: 230 mm – Saw blade diameter: 450 mm – Main motor power: 75 kW – Feed motor power: 2 x 2.2 kW – Top feed roller motor power: 1.1 kW – Side outfeed roller motor power: 2 x 1.1 kW – 2 toothed feed rollers – Infeed table length: 2100 mm – Outfeed table length: 2600 mm – Machine dimensions (L/W/H): 600 x 200 x 185 cm – Weight: approx. 3800 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Splošni podatki Mere širina 2050 mm Mere globina 2695 mm Mere višina 2120 mm Teža stroja 5800 kg Glavni pogon Prodpfewvmzyex Aafec Območje vrtljajev vretena 5000 / Podvreteno: 6000 min⁻¹ Moč motorja vretena 15/15/11 kW Podvreteno: 11/7,5 kW Premer izvrtine vretena 73 mm / Podvreteno: 43 mm Število osi 4 Pomik Premik X-osi 260 mm Hitri pomik X-osi 30000 mm/min Premik Y-osi 100 (±50 mm) Hitri pomik Y-osi 10000 mm/min Premik Z-osi 590 mm Hitri pomik Z-osi 30000 mm/min Premik B-osi 564 mm Hitri pomik B-osi 400 min⁻¹ Obdelovanec Premer obdelovanca nad posteljo 923,8 mm (579,8 mm s sprednjo zaščito) Premer obdelovanca nad podporo 755 mm Premer obdelovanca 356 mm Dodatna oprema Mostno nakladalo za avtomatsko nakladanje in razkladanje Ta 4-osni stružno-rezkalni center MORI SEIKI NL 2000 SY /500 je bil izdelan leta 2007. Idealna rešitev za precizno obdelavo, stroj se ponaša z robustno zasnovo in naprednim krmilnim sistemom. Če iščete kakovostno struženje in rezkanje, razmislite o stroju MORI SEIKI NL 2000 SY /500, ki je na voljo pri nas. Za dodatne informacije nas kontaktirajte. Nameni uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 1968, Funkcionalnost: nepreverjeno, premer struženja: 1.500 mm, For sale: 1 used facing lathe/planing lathe Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik Model: 505ev/500 Year of manufacture: 1968 Psdper Nzm Tefx Aafjrc Faceplate diameter: 1,500 mm Including documentation The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Stanje: rabljeno, Cutter: Z4 Prjdpfx Ajlf I Rvsafoc - 125 x 130 x 35 mm - Strip planer knife.

Stanje: rabljeno, Leto izdelave: 2011, Travel path - X axis: 570 / 500 (1,070) mm Travel path - Y axis: 650 mm Travel path - Z axis: 530 mm Control: HEIDENHAIN iTNC 530 Prjdjwlvraspfx Aafoc Spindle speed: 12,000 rpm Tool holder: SK40 5-axis machining centre | HEDELIUS RS605 K IC equipped with tool changer, internal coolant supply (50 bar), zero-point clamping system, and chip conveyor. The machine has only 7,863 spindle hours. A comprehensive tool package is included in the scope of delivery. The machine is in well-maintained condition. For further equipment details, please refer to the original order confirmation attached to the offer. #Tags: RS605 K IC 40 | RS-605 | RS 605

Stanje: dober (rabljeno), Hand wash basin with slop sink, washbasin - Stainless steel washbasin - Upper basin dimensions: 390 x 285 x 120 mm Predeb Uhm Rspfx Aafjc - Lower basin dimensions: 400 x 400 x 200 mm - Quantity: 6 basins available - Price: per unit - Dimensions: 700/500/H445 mm - Weight: 9.1 kg

Stanje: novo, Main features of the machine: The TOP CUT 500 band saw offers high-quality features and extensive capabilities, particularly suited for companies involved in wood processing at various scales. The machine ensures unmatched stability and robustness. - Touchscreen panel with electronic cutting height display - Control panel located at the front of the machine for easy and convenient operation - Cutting thickness electronically controlled and programmable - Cutting unit raised by two motor-driven cylinders - Infeed and outfeed conveyors driven by hydraulic variator - Hydraulic blade tensioning system - Pneumatic blade lubrication system Pjdpfx Aoiim Tqjafjrc - Pneumatic pressure roller system ensures precise blade guidance - Stable, steel machine frame guarantees precise operation - Cutting accuracy and repeatability up to 0.01 cm Technical specifications: Maximum workpiece dimensions: 520 x 300 mm Conveyor belt width: 495 mm Conveyor belt length: 5535 mm Max cutting height: 300 mm Min workpiece height: 5 mm Saw blade wheel diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m/min Blade size: 5200 x 35–55 x 1.6 mm Voltage: 380 V Main motor power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800 x 2400 x 2000 mm

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina: 6500 mm Predpfx Aov Utpceafsc Mere dolžina: 18500 mm Mere višina: 2000 mm Teža stroja: 10.500 kg Dodatna oprema Stiskalnica (čelna stiskalnica): pritisk stiskanja 6–12 t, poraba moči 52 kW Poraba stisnjenega zraka: 350 NL/min za rezkalni stroj, 500 NL/min za stiskalnico Sesalni volumen: 10.600 m³/h Stroj omogoča hitre transportne cikle z natančnim poravnavanjem Vključuje hidravlični stiskalni sistem za neprekinjeno spajanje Opremljen z integriranimi sistemi za odsesavanje prahu in sesanje Stroj Grecon Dimter FDL-F 205/600/500 je bil izdelan leta 1997. Namenjen je obdelavi lesa – ponuja zanesljivo delovanje in robustno zmogljivost. Idealen je za učinkovito opravljanje različnih lesnoobdelovalnih nalog. Za dodatne informacije o tem stroju nas kontaktirajte. Vrste uporabe Drugi lesnoobdelovalni stroji

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Model: SB2/500/80 Water-cooled Cooling & heating range: -75°C to +180°C Climate range: +10°C to +95°C Humidity range: 10% to 98% relative humidity Temperature stability, temporal: ± 0.2K Humidity stability: ±1% r.h. Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height: 1980 mm, Width: 1265 mm, Depth: 1365 mm Feed-throughs: Left side: ∅ 100 mm Right side: ∅ 50 mm Connection voltage: 400V / 3Ph+N+PE / 50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerants: R404a / R23 For your security as a buyer, please note the following: The following steps are carried out in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a test run, monitored with calibrated equipment. Pjdpfem Tvzcjx Aafsrc Type: SB2/500/80 Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: rabljeno, Knife: Z2(4) - 100 x 130 x 35 mm, Predpfx Aslf I Rrsafoc - Strip planer knife.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, MULTI-BLADE CIRCULAR SAW PAUL K 34G/1500 USED TECHNICAL SPECIFICATIONS: - FEED SYSTEM WITH RUBBER-COATED ROLLERS. - USEFUL FEED WIDTH: 1,500 MM - MAIN MOTOR POWER: 37 KW (50 HP) - ELECTRONICALLY CONTROLLED FEED MOTOR WITH GEAR REDUCER: 3 HP, 2-48 M/MIN - MAXIMUM SAW BLADE DIAMETER: 300 MM - MAXIMUM CUTTING HEIGHT: 100 MM Podpfeuryrnex Aaferc

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), The subject of this auction is a BRODPOL sawmill line. Predpfxjl H Hy Hj Aafjc The line consists of: preliminary log feeder with cascade, infeed conveyor, BRODPOL TT5/500/320/G circular sawmill with centering device and outfeed unit, as well as a sorting table. - Processed log diameter: 100 - 320 mm - Processed log length: 1,250 mm - 6,000 mm - Saw blade diameter (only): 500 mm - Maximum number of blades on the spindle: 5 pcs. - Feed speed: 10 - 28 m/min - Main motor power: 55 kW + 75 kW - Required pneumatic supply: 6 bar - Capacity: up to 20 m³ per hour of operation