Vertikalni tračni žagalni stroj

BAUER 500 VS

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Hedet Akt Repfx Adkjfk Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: novo, Leto izdelave: 2026, premer spodnjega valja: 220 mm, premer zgornjega valja: 220 mm, premer stranskega valja: 180 mm, premer valja: 220 mm, dolžina valja: 2.070 mm, najv. debelina jeklene pločevine: 10 mm, lastna masa: 4.500 kg, - 4 valjka - Kapacitet 2070 x 10 - Kapacitet savijanja 2070 x 8 - Očvrsnuti valjci - Prečnik gornjeg valjka 220 mm - Prečnik donjeg valjka 220 mm - Prečnik bočnog valjka 180 mm - Hidraulični pogon - Digitalni prikaz za levi pomeraj valjka - Digitalni prikaz za pomeranje srednjeg donjeg valjka - Digitalni prikaz za pomeranje desnog valjka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Hidraulički pokazivač za jednostavno pozicioniranje valjaka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Gornji valjak je hidraulično otvarajući - Čelična konstrukcija ST-52 Hfedpfx Adsr H Df Iokek - Hidraulični drop-end za lako pozicioniranje valjka - Hidraulični sistem podizanja i spuštanja sa centralnim i bočnim valjcima - Hidraulički balans sistem - Zaštita od prenapona - Dokumentacija - 400V

Stanje: novo, Leto izdelave: 2025, Laserska moč: 6000W / 12000W / 20000W Primeren material: kovina Stanje: novo Tip laserja: vlakenski laser (fiber laser) Delovna površina: 3000 x 1500 mm Hitrost rezanja: 200 m/min Podprti grafični formati: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Način hlajenja: vodno hlajenje Hodpfx Aog Du Aqjdkofk Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: IPG/MAX Teža: 11.000 kg Garancija: 3 leta Napajanje: 110V / 220V / 380V 50Hz/60Hz 1. Flagship serija Izjemno dinamičen odziv, enostavno obvladuje kompleksne vzorce na pločevini. 2. Samodejno iskanje robov Funkcija prepoznavanja nepravilnih pločevin, čas iskanja robov je skrajšan na 3 sekunde. 3. Samodejni menjalnik šob Stroj zamenja šobo v le 35 sekundah, kar pomeni do 50 % prihranek časa.

Leto izdelave: 1980, stanje: dober (rabljeno), številka stroja/vozila: 3253-80, Offer 22045 Technical Specifications (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm Hfsdpfx Ajktg Dhjdkok - Through-hole in table: 165 x 125 mm - Max. installation height: 220 mm - Ram area: 240 x 150 mm - Ram bore diameter: 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 – 60 mm - Stroke rate: 130 strokes/min - Hydraulically operated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW - Space requirement approx.: W 1000 x H 1800 x D 1100 mm - Weight approx.: 1300 kg

Stanje: novo, Vertical band saw Brand: METALLKRAFT Model: VMBS 1610 Item no.: 3951610 Hfedpfshy Tcqsx Adkjk Condition: New machine Cutting speed: 20 - 1000 m/min Accessories: - Band welding unit with shears and grinding motor - Machine lamp - 2-speed gearbox, continuously adjustable - Chip blower device - Parallel fence - Operating manual

Stanje: novo, In stock Reach: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Auxiliary table size: 220 x 500 mm Bandsaw blade length: 3970 mm Cutting speed, stepless: 20 - 85 / 120 - 500 m/min Bandsaw blade width: 3 - 16 mm Table tiltable, 4 directions: 15° Hfjdpfjilk Nysx Adksk Main motor power: 1.5 kW Bandsaw welding unit connection: 2.4 kVA Weight, approx.: 700 kg Features: - Stepless cutting speed - Bandsaw blade welding device - Bandsaw blade in adjustable precision guides - Work table tiltable on all sides (not available with machines featuring table feed, due to design) - Bandsaw shear - Grinding unit - Chip brush - Lifting eye for relocating the machine - Machine lamp - LED speed display - Air blower - CE certified

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1984, Connected load 380V 9A Motor power 4 kW Cutting height 460 mm Hsdpfxsvt Ttlj Adksfk Cutting width 770 mm Extraction port 120 mm Machine height approx. 2500 mm Panhans band saw guide (top and bottom) Saw band length 5700 mm

Stanje: dober (rabljeno), Bandsäge Samur Mod S 650 Modellnr. 440,16-103 9-336 m/min. EN: Samur Band Saw Model S 650 Model No. 440,16-103 Cutting speed: 9-336 m/min. FR: Scie à ruban Samur Modèle S 650 N° de modèle 440,16-103 Hjdpedmykgsfx Adkjfk Vitesse de coupe : 9-336 m/min. ES: Sierra de cinta Samur Mod. S 650 N.º de modelo 440,16-103 Velocidad de corte: 9-336 m/min. IT: Sega a nastro Samur Modello S 650 N. modello 440,16-103 Velocità di taglio: 9-336 m/min.

Stanje: rabljeno, Leto izdelave: 1971, Roller diameter / mm Throat depth / mm Workpiece height / mm Table size 800x750 mm Technical data: Table size approx. 800 x 750 mm Hfedowgi R Sjpfx Adkok Bandsaw blade length: 3920 - 4050 mm

Stanje: novo, Leto izdelave: 2025, Technical specifications: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Working table height: 750 mm • Feed range: from 5 to 2300 mm per stroke • Cutting area at 90°: flat materials 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat materials 320 x 335 mm • Round cutting at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: infinitely adjustable from 15 to 150 m/min • Maximum material load: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE using light curtain barriers. • Robust double-column linear band saw frame by MEBA with automatic material feed system (range 5–2300 mm per stroke). • CNC control enabling easy program entry and visualization. • Automatic mitre cutting at any angle within 30°–135°, with length and quantity settings. • Capability for creation and management of up to 255 cutting programs. • Intuitive data entry to minimize operator error. MEBA High-Performance Package: • Saw feed with servomotor and ball screw drive, featuring automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting various types of material, including thin-walled profiles. • Precise and fast material positioning using AC rack drive (stroke length up to 2300 mm) and integrated roller conveyor (length up to 3000 mm). • Clamping jaw system that can open from both sides, equipped with bars for transporting heavier material. Design and functionality: • Solid saw frame made of vibration-resistant welded steel. • Saw blade tilted at a 3° angle relative to the table for enhanced performance and blade life when cutting steel profiles. • Combined blade guides with high-precision bearings to minimize blade deviation. • Carbide slide guides for maximum precision. • Zero point (mitre rotation) located at the intersection point of the blade and the movable clamping jaw, eliminating the need to adjust cutting length when changing the angle. Hodpfx Aswf Hm Iedkefk • Automatic angle programming via the control panel. Vise system: • Patented double mitre vise system with automatic position adjustment to the cutting angle—ensuring secure and precise clamping near the cutting line. • Clamping executed by full-stroke cylinders. Other features: • Automatic lowering of the saw frame in front of the material at the start of the cut, minimizing cycle times. • Optimal conditions for both individual and series cuts. • Steplessly adjustable bandsaw drive controlled by inverter (15–150 m/min). • Precisely pre-machined parts to eliminate play.