Holzkraft Hbs 351 Test nakup rabljenega (227)

Stanje: novo, Leto izdelave: 2025, Enclosed and secure sawing area for increased safety thanks to a legally required saw blade guard Anti-rotation protection for the timber via stamped barbs in the rocking table Robust, torsion-resistant steel frame Transport device for easy mobility Impact, scratch, and weather resistant due to high-quality powder coating Phase inverter Dimensions and Weights Bwsdpfxshkz Hij Abxew Working height: 700 mm Rocking table support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Drive Type: Electric motor with direct drive Electrical Data Rated power: 5 kW Supply voltage: 400 V Mains frequency: 50 Hz Saw Blade Diameter: 700 mm Cutting Capacity Round wood in rocking table: 250 mm Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Holzkraft Extraction System RLA 210 For wood dust and chips, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of suction connection (inlet): 200 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Bodpfehk Dfrsx Abxeww Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Max. sound pressure level: 72 dB(A) Air Volume Nominal air flow: 2262 m³/h Dust tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirement Maximum performance in this class Very quiet All models equipped with collision protector Applications Designed for commercial use Suitable for all woodworking machines with corresponding suction connection diameters High-Quality, Thoughtful Construction -Robust and compact housing made of galvanized steel sheet -Suction connection can be easily converted from left to right for flexible use -Large access openings for maintenance -Large, mobile chip containers with clamping bracket and chip collection bag -Dust extractor comes fully assembled for immediate operation -All models are mobile -RLA 210 model: Optimal chip distribution in the containers thanks to a large filter area Filter Description -Ultra-compact with maximum filter area -Filter material made of polyester fleece, aluminum-coated, washable and therefore highly durable -Filter standard antistatic, certified and approved according to category M-BIA -Filter resistance monitoring via differential pressure switch, adjustable with warning lamp on control panel -Fan mounted downstream of filter Equipment Details With innovative locking device for secure container positioning Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Article Number: 5502266 Brand: Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Bwjdpohp Rc Ijfx Abxew Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Surfacing Total table length 2,250 mm Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Minimum working height 3 mm Maximum working height 240 mm Bwsdpoih Dxdefx Abxjw Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Robust cast steel/grey cast iron construction Large-dimension milling unit made of grey cast iron, tiltable up to -45° to the rear Milling speeds displayed via LEDs Fast, effortless speed change via eccentric clamping Forward and reverse rotation Height and tilt display accurate to 1/10 mm Professional-grade heavy-duty fence: with fine adjustment via rack and pinion, numerical display, aluminum fence jaws, 3-way positioning for quick repeat settings TECHNICAL DATA Dust extraction connection Extraction port diameter: 2 x 120mm Work table Table length: 2500mm Table width: 655mm Electrical data Connection voltage: 400V Mains frequency: 50Hz Motor power: 5.0kW Spindle Spindle tilting: 0 – -45° Usable spindle length: 125mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle shaft diameter: 30mm Maximum cutter diameter Max. tool diameter: 240mm Max. retractable tool diameter: 230mm Max. profile milling tool diameter: 210 – 240mm Max. tenoning cutter diameter: 320mm SCOPE OF DELIVERY Aluminum milling fence jaws Curved workpiece safety guard Motorized height-adjustable and tilting spindle Bedoiidnfspfx Abxeww Digital display of set values Speed display at the front of the machine via LED Extension table left and right Location: In stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Woodworking machinesSliding Table Spindle Moulder Minimax twf55 es Item number: 5502261 Robust steel and cast iron construction Anodised aluminium format sliding table Large-scale spindle unit made of cast iron, tiltable backwards up to -45° Four spindle speeds from 3500 to 10000 rpm Clockwise and counterclockwise rotation standard Height and tilt display precise to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress-relieved and annealed for permanent precision Powerful 5.0 kW industrial motor Curved section hood included Made in Italy Dimensions and Weights Length (Product) approx. 1200 mm Width/Depth (Product) approx. 2000 mm Weight (Net) approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Table length: 1200 mm Table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Setup Information Required Space Length: 2800 mm Required Space Width/Depth: 2910 mm Space Requirement Note: Dimensions account for maximum travel paths or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Working area note: Please add the specified dimensions to the required space to determine the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Motor output: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speeds: 3500/6000/8000/10000 rpm Spindle speed display: LED at machine front Spindle shaft diameter: 30 mm Max. Tool Diameter Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tool diameter for profile milling: 240 mm Max. tool diameter for tenoning: 320 mm EQUIPMENT Features Bedoi Dphtjpfx Abxeww Aluminium sliding table: ✔ Spindle fence: Heavy-duty professional design with hold-down, safety cover and aluminium spindle fence jaws Telescopic mitre fence: with two flip stops Extension table: ✔ Curved section safety hood: ✔ Eccentric clamp: ✔ Handle on sliding table: ✔ Manual spindle height adjustment Manual spindle tilt adjustment Control: Manual height and tilt adjustment of the spindle unit Control elements location: On machine body Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, ST 3 classic F 23 – Combined Saw and Spindle Moulder Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and cast iron construction Large support surface and precise cast iron table High-precision sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45° Saw rip fence with fine adjustment Bedpfxjcnwydo Abxeww Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 manually adjustable spindle speeds from 3,500 – 10,000 rpm Spindle moulder with forward/reverse rotation Standard arc-shaped spindle guard Two 5.0 kW motors with high performance reserves Cast Iron Spindle Moulder Unit secured at the top on both sides precision ball bearings at the top close to the pivot point four optimally graduated spindle speeds allow for sharpening of workpieces Powerful Motors Industrial motor, 100% duty cycle for continuous operation at full load Scope of Delivery: Arc-shaped spindle guard Anodized aluminium sliding table Aluminium fence jaws Folding stops Technical Data Cast iron table dimensions: 1112 x 430 mm Edging length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscut length: 2660 mm Saw blade tilt: 90° - 45° Cutting width: 900 mm Speed: 4000 rpm Table router: - Spindle tilt: 90° - 45° Useable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. tool diameter, retractable: 180 mm Speeds: 3,500/7,000/10,000 rpm General: - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction ports diameter: 2 x 120 mm Saw blade guard extraction port diameter: 60 mm Location: From stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds for sawing, milling, surface & thickness planing, and optional slot mortising Torsion-resistant steel and cast-iron frame Machine table made of cast iron, hardened and ground Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear Large crosscut table with extendable aluminum telescopic fence and flip stops Combination saw mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for uniform timber feed during thickness planing Four manually adjustable spindle speeds Standard reversible spindle rotation (clockwise and counterclockwise) Three independent motors for each operating unit Scope of delivery: Combination planing/parallel fence Curved guard hood for spindle moulder Tersa cutter block Anodized aluminium sliding table Aluminum fence jaws Flip stops Eccentric hold-down arm Bedpjcnxa Njfx Abxeww Model: LAB 300 PLUS F 16 Tersa Article No.: 5500314 Technical Data ---Circular Saw--- Cutting length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Rip capacity at fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° ---Surface Planer--- Working width: 300 mm Planer table length: 1260 mm Cutter block diameter / Number of knives: 72 mm / 3 pcs. ---Thickness Planer--- Table dimensions: 300 x 450 mm Min./max. working height: 3 mm / 220 mm Max. depth of cut: 4 mm Feed speed: 7 m/min ---Spindle Moulder--- Usable spindle length: 100 mm Max. tool diameter, retractable: 180 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 140 mm Spindle speeds: 3500/6000/8000 rpm Spindle diameter: 30 mm Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40% Weight: 430 kg Extraction port diameter: 4 x 120 mm Saw blade guard extraction port diameter: 60 mm Sliding Table with Ball Contact System Equipped with a proven ball contact system used millions of times Permanently smooth operation through hardened and ground guideways Not sensitive to dust and dirt due to minimal contact points between ball and rail 10-year Holzkraft warranty against wear on carbide guideways Extraction Hose Connection The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine. Planer Units Helical steel feed rollers for continuous and uniform timber feed Heavy-duty anti-kickback fingers prevent material kickback 3-knife cutter block ensures optimum planed finish

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Bwodpfx Ajff Hdpsbxsw Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Vertical design for splitting short and meter-length wood Low ground plate for easy, fatigue-free loading of large logs Mechanical log lifting device positions heavy logs ergonomically Equipped with log holding bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter included on all 400 V models Two-hand safety operation Convenient transport using hand tow bar with standard undercarriage, solid rubber wheels, and additional support wheel Shock and scratch resistant thanks to high-quality powder coating Space-saving storage thanks to easily lowerable cylinder Dimensions and Weights: Length approx.: 1440 mm Width/Depth approx.: 1350 mm Height approx.: 2280 mm Weight approx.: 185 kg Drive: Type: Electric motor Rated power: 3.5 kW Electrical Data: Connection voltage: 400 V Mains frequency: 50 Hz Machine Data: Max. splitting force: 14 t Min. splitting length: 560 mm Max. splitting length: 1040 mm Min. log diameter: 100 mm Max. log diameter: 300 mm Hydraulic System: Hydraulic oil tank capacity: 7.5 l Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale Bwodpfx Abohkz Hmsxow

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 2803 Mobile, with 180° rotatable extraction unit For chips from milling, planing, and sawing (not suitable for dust) 180° rotatable extraction unit allows for extraction guidance from below or above Robust metal impeller Supplied as standard with high-quality undercarriage for improved stability and easy maneuvering Quick-release fasteners for filter and chip bags Fine filter bag, double-layered Dimensions and Weights Chip collection volume: 2 x 120 l Outer diameter of inlet extraction nozzle: 203 mm Outer diameter of outlet extraction nozzle: 1 x 100, 2 x 120 mm Length approx.: 1500 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 53 kg Electrical Data No-load speed: 2950 RPM Input power: 2.2 kW Connection voltage: 400 V Network frequency: 50 Hz Filter Filter surface: 2 x 1.92 m² Bjdpfx Abohk S Sdoxoww Noise Emission Maximum sound pressure level: 87.5 dB(A) Airflow Nominal airflow: 2800 m³/h Maximum negative pressure: 1900 Pa Scope of delivery: Two filter bags, two chip bags Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Unit ASA 1903 Mobile, with 180° rotatable extraction unit For milling, planing and saw chips (not suitable for dust) 180° rotatable extraction unit allows for suction from below or above Robust fan impeller made of metal Supplied with a high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip bag Fine filter bag, double-woven Dimensions and Weights Chip collection volume: 110 l Outer diameter extraction nozzle inlet: 203 mm Outer diameter extraction nozzle outlet: 1 x 100, 1 x 120 mm Length approx.: 1000 mm Width/Depth approx.: 500 mm Height approx.: 2100 mm Weight approx.: 39 kg Bwodehk S Shopfx Abxjw Electrical Data No-load speed: 2950 min¯¹ Power consumption: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 1.92 m² Noise Emission Max. sound pressure level: 85.7 dB(A) Airflow Nominal airflow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of delivery: Filter bag, chip bag Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Chip Extraction Device ASA 4303 Mobile unit with 180° rotatable extraction assembly Designed for milling, planing, and saw chips (not suitable for dust) 180° rotatable extraction unit enables chip removal from below or above Robust metal impeller Standard equipped with a high-quality chassis for increased stability and easy maneuverability Quick-release fasteners for filter and chip collection bags Fine filter bag, double woven Dimensions and Weights Chip collection volume: 2 x 215 l Extraction inlet diameter (outer): 260 mm Extraction outlet diameter (outer): 2 x 100, 2 x 120 mm Length approx.: 1700 mm Width/depth approx.: 600 mm Height approx.: 2400 mm Weight approx.: 69 kg Electrical Data No-load speed: 2950 rpm Motor power: 3.8 kW Bedpfx Abehk S Sloxjww Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Rated airflow: 4300 m³/h Max. vacuum: 2000 Pa Scope of Delivery: Two filter bags, two chip collection bags Location: Ex-stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2022, Drilling depth: 170 mm Drilling width: 250 mm Speed: 2800 rpm HOLZKRAFT Mortising Machine LLB 30 Entry-level mortising machine with single-hand lever, eccentric clamp, dowel drilling device, and drill head height adjustment with handwheel and digital display for fast and precise operation. Worktable (LxW): 580 x 300 mm Drilling width: 250 mm Drilling depth (at 90°): 170 mm Drill head height adjustment: 200 mm Worktable swivel range: not swiveling Tool holder: WESCOTT chuck Clamping range: Ø 0 - 20 mm Spindle speed: 2,800 min-1 Motor power: 2.2 kW | 400 V - 50 Hz Extraction port: Ø 70 mm Dimensions (LxWxH): 1500 x 920 x 1400 mm Weight (net): approx. 160 kg Includes dowel drilling device, eccentric clamp, digital height adjustment display, Wescott chuck 0-20 mm Bwodpfx Aboih H A Rexow HOLZKRAFT LLB 30 Mortising Machine – Entry-level machine for professional mortising – Made in EU Easy operation with single-hand lever for fast and precise results Drill head with hardened prism guides and bearing with ball contact system Drill head height adjustment with handwheel and digital readout Manual eccentric clamp Sturdy steel and cast iron construction Powerful three-phase motor Dowel device with notching positions: 16 | 22 | 27 | 32 mm Clamping stops allow easy and quick setting of the drill head travel Scope of delivery: HOLZKRAFT LLB 30 Mortising Machine Drill head height adjustment with handwheel and digital display Dowel drilling device with indexing Eccentric clamp Wescott chuck 0 – 20 mm Operating manual with exploded diagrams, spare parts list, and EC Declaration of Conformity Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Small panel saw with tilting saw blade and high-quality anodised aluminium sliding table Cutting level of the small panel saw is directly at the rolling table Precision-guided format sliding table made from aluminium, anodised as standard Large support table on telescopic arm, longitudinally adjustable Standard table extension and table widening enable easy handling of larger workpieces The large saw unit, made from cast iron, is double-mounted to the cast table, ensuring stability, precision, smooth running, and a long service life Large working table made of ground cast iron, extremely robust and insensitive to wear Smooth operation and precise cuts Aluminium sliding table Proven ball-contact system, in use millions of times Dust and dirt resistant due to minimal contact area between ball and trapezoidal rail 10-year HOLZKRAFT warranty against wear on the hardened guideways Telescopic fence Extendable aluminium telescopic fence Adjustable angle With two professional folding stops Parallel fence Standard with fine adjustment and quick clamping system Scope of delivery: - Table extension - Table widening - Anodised aluminium format sliding table Bodpfxocnxamj Abxjww - Parallel fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data Table dimensions 1020 x 325 mm Table height 900 mm Crosscut length 1660 mm Max. cutting height 90° with scorer 100 mm Max. cutting height 45° with scorer 79 mm Max. rip width left of saw blade 1270 mm Cutting width with parallel fence 900 mm Saw blade tilt 90° - 45° Max. saw blade diameter with scorer 315 mm Max. saw blade diameter without scorer 315 mm Scoring saw blade diameter (option) 80 mm Main saw blade speed 4000 rpm Scoring saw blade speed 7600 rpm Electrical connection 400 V / 50 Hz Motor power 4.0 kW Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Weight 295 kg Location: Available immediately ex stock 54634 Bitburg - immediately available -

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Workbenches in professional design Precise and meticulous craftsmanship Bsdpjc Uydaefx Abxeww Entirely made from steamed, solid beechwood All important edges are rounded Surfaces are eco-friendly oil-finished Supplied as standard with tool drawer The two cylindrical rods of the vises are precisely and stably guided within a cast component Equipped with a smooth-operating trapezoidal thread spindle With French-style front vise and German-style tail vise with linear guide, two short round bench dogs, two long round bench dogs, drawer and tool tray Finger-jointed tail vise and tool tray back Length of work surface without vises: 1915 mm Width/depth of work surface without vises: 615 mm Working height: 870 mm Front vise length: 520 mm Tail vise length: 450 mm Front vise width: 70 mm Tail vise width: 140 mm Front vise clamping range: 190 mm Tail vise clamping range: 180 mm Front vise clamping range to center of round dog: 225 mm Tail vise clamping range to center of round dog: 265 mm Top thickness: 50 mm Product length: 2120 mm Product width/depth: 790 mm Product height: 870 mm Weight (net): 91 kg Location: Available from stock, 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Work table height adjustment 210 mm Cross table height min. 730 mm Bjdpfx Aboff Ed Tsxeww Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short notice

Stanje: novo, Leto izdelave: 2025, Robust construction allows machining of longer workpieces. Grinding unit is tiltable, making the machine also usable as an edge sanding machine. 225 mm large, precision-balanced belt drive rollers ensure low-vibration operation. Easy belt alignment adjustment. High belt speed of 17 m/s. Right/left belt run. Top sanding shoe with graphite coating. Sanding shoe with 4-way spring suspension. Equipped with a movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy loads from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table with flip-up function for specialized edge sanding. Drawer sanding device. Integrated work table lighting. Features and Equipment 225 mm large, precision-balanced belt drive rollers ensure optimal, low-vibration power transmission. Belt speed: 17 m/s. Professional tiltable sanding shoe for bevelled surfaces (4-way spring suspension). Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with integrated drawer sanding device. Split table with flip-up functionality for specialized edge sanding applications. Dimensions and Weights Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Work Table(s) Table height adjustment: 550 mm Table transverse travel: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Grinding Unit Abrasive belt length: 7000 mm Abrasive belt width: 150 mm Belt speed(s): 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm Bsdsff Hdfjpfx Abxjww

Stanje: novo, Leto izdelave: 2025, Designed for professional structuring and sanding tasks Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable rubberized conveyor belt Infinitely variable feed rate Constant infeed height STR L models with infinitely variable, inverter-controlled brush speed: this allows precise adjustment of the speed to the material, making it particularly suitable for sensitive materials. Unit for saw-cut effect available as an option Motorized height adjustment of the units Units can be switched on individually Infinitely adjustable feed rate Dimensions and Weights Length approx. 1300 mm Width/depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Connection for dust extraction Extraction connection diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Speed 1500 min⁻¹ Electrical Data Drive motor power 2 x 3.0 kW Feed motor power 0.22 kW Total power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise Emission Sound power level Lw (idle without extraction) 65 dB(A) Sanding Unit Max. sanding width 300 mm Feed Unit Bwsdoff Hdgspfx Abxsw Feed speed 1 – 13 m/min Workpiece Max. height 300 mm Max. weight 100 kg

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Bwsdpfx Absff Hdmsxsw Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Raw Air Extraction Unit ASA 203 With standard chassis Dimensions and Weights Chip collection volume: 175 l Inlet extraction port (external diameter): 200 mm Length approx.: 1061 mm Width/depth approx.: 577 mm Height approx.: 2300 mm Weight approx.: 60 kg Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Filter Filter surface area: 2.2 m² Bwodpfxohk S Szs Abxsw Noise Emission Max. sound pressure level: 84 dB(A) Volume Flow Rate Rated air flow: 2500 m³/h Suitable for milling, planing, and sawing chips (not dust) Significantly reduced dust content thanks to BIA-tested filter material with high separation efficiency Housing components and impellers made from high-strength special plastic Quick-release fasteners for easy maintenance of filter and chip bags Robust, high-quality construction Easy maneuverability thanks to swivel castors Low power consumption Extraction system complies with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit Chip bag / extraction unit Without extraction hose

Stanje: novo, Leto izdelave: 2025, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Bwedohp Rdlepfx Abxsw Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Planer-thicknesser minimax fs 41es TERSA Maximum configuration for professional use. Article number Bwedpfxjlht Hto Abxsw 5503431 Brand Holzkraft / SCM Helical-toothed steel infeed roller for constant and uniform material feed, enabling chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for efficient planing of precious hardwoods Models equipped with TERSA cutterblock for rapid, tool-free knife changes and especially quiet operation Material feed with two selectable speeds Extra-long surfacing tables provide easy and precise workpiece alignment Work tables made of grey cast iron, annealed and stress-relieved, making them resistant to deformation and permanently flat Simultaneously rear-opening surfacing tables for minimal setup times Thicknessing table adjustment via handwheel with numeric thickness display High machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/grey cast iron construction Quality – Made in Italy TECHNICAL DATA Dimensions & Weights Length (product) approx. 2200mm Net weight approx. 450kg Width/depth (product) approx. 1160mm Surfacing Total table length 2200mm Fence length 1200mm Working height 905mm Fence height 150mm Max. stock removal, surfacing 5mm Chip extraction connection Suction port diameter, thicknessing: 1 x 120mm Thicknessing Thickness table length 775mm Max. working height thickness 240mm Table width 410mm Max. stock removal, thicknessing 5mm Min. working height thickness 3mm Electrical Data Main drive motor power 5kW Mains frequency 50Hz Connection voltage 400V Cutterblock Cutterblock type: TERSA Cutterblock speed 5000rpm Cutterblock diameter 95mm Max. planing width 410mm Number of knives 4 Feed Feed speed 6 / 12m/min SCOPE OF DELIVERY Planing jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Woodkraft Vertical Panel Saw VPS 2241 VR ED Fully equipped, precision panel saw Item number: 5600242 DESCRIPTION Smooth and ergonomic operation Scoring unit for splinter-free cutting quality Automatically retracting slatted frame Continuous central workpiece support Two measuring stops Panels rest on movable rollers and can be positioned without lifting Modular welded machine frame, torsion-free and self-supporting Saw unit with chain guide and two operating levers Large opening for saw blade replacement TECHNICAL DATA General Information Max. cutting height: 2200 mm Cutting length: 4100 mm Cutting depth: 60 mm Bwodpfx Asw Aqaasbxsw Saw blade diameter: 250 mm Saw blade speed: 4800 rpm Scoring blade diameter: 80 mm Scoring blade speed: 8500 rpm Stops: 2 pieces Sound pressure level: 89.2 dB(A) Dimensions and Weight Max. product height: 3100 mm Product length approx.: 5300 mm Product width/depth approx.: 1800 mm Product height approx.: 3000 mm Net weight approx.: 600 kg Extraction Connection Extraction nozzle diameter: 100 mm Min. extraction air volume: 1000 m³/h Min. air velocity: 20 m/s Electrical Data Drive motor power: 3 kW Connection voltage: 400 V Mains frequency: 50 Hz SCOPE OF DELIVERY Saw blade Ø 250 x 30 x 3.2 mm Z80 trapezoidal Scoring blade Ø 80 x 2.8-3.6 mm Z20 FEATURES Lower material support: metal rollers Retracting slatted frame: automatic Vertical measurement display: digital Horizontal measurement display: digital Panel positioning: without lifting on movable rollers Location: ex works - Available at short notice - Subject to prior sale

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterhead and planer blades – quick-change system The Tersa planer blade system allows for blade changes within seconds and provides especially quiet operation. Helically geared steel feed roller ensures consistent and even wood feed Extra-long planing tables Large planing fence can remain in place when opening the planing tables. Planing tables open towards the rear Heavy machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutterhead diameter/number of knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Bodebuldyepfx Abxeww Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutterhead, anodized planing fence Available from stock in Bitburg - immediately available -