Hladno nakup rabljenega (251)

Stanje: zelo dobro (rabljeno), CTS Model: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for carrying out thermal shock tests and is typically used in industry, research, and quality assurance. Areas of application: - Material testing - Aging tests - Electronics and component testing - Thermal shock and alternating temperature tests Technical specifications: Model: TSS-70/130 Test volume: 130 liters Temperature range: Hot zone: +50°C to +200°C Cold zone: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock test applications Without radiant heat Transfer time between chambers: ≤ 15 min in the range of -65°C to +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Building-side protection: 32 A slow-blow fuse Power plug: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for user side test object control - Fault alarm on volt-free contact Load: up to 30 V DC, 2 A - EMC-tested Technical configuration: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / basket made of stainless steel, material grade 1.4301 - Insert basket made of stainless steel wire - Piping port NW 50 with closure plug - Compressed air connection 1/4" male thread - Non-pressurised condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation plan: External dimensions approx.: 2335 x 940 x 1820 mm Insertion dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm Width approx. 480 mm Depth approx. 660 mm Window: 300 x 300 mm Itodpfjy Hkd Hjx Abxeh Additional data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average test cycle consumption: approx. 8 kWh Important buyer safety information! The following procedures are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant where required 3. Leak tightness test with certificate 4. After a successful check, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error!) We are happy to answer further questions by phone.

Stanje: rabljeno, Leto izdelave: 2012, GEA Milk Separator MSE 100-06-177 Year of manufacture: 2012 Max. permitted rated drum speed: 7200 rpm Max. permissible feed product density: 1.0 kg / dm³ Heavy phase (liquid): 1.0 kg/dm³ Itedpfx Aswayr Tebxeh Solids: 1.1 kg/dm³ Min. / max. feed product temperature: 5 / 100 °C Max. throughput: 30 m³/h

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Zasnovan za profesionalnu upotrebu i proizvodnju najkvalitetnijih napitaka od cold brew kave. Brza i učinkovita proizvodnja cold brew kave uz ugrađeni sustav dvostruke distribucije nitro cold brew napitaka. Kapacitet od 250 litara dnevno = 1000 porcija koje možete posluživati dok istovremeno nastavite s proizvodnjom putem HardTank-a. Patentirana tehnologija omogućuje ekstrakciju iznad 22% u roku od 45 minuta. Kratka ekstrakcija u zatvorenoj komori eliminira rizik od oksidacije i povećava rok trajanja napitka. Iedpfowm Enyox Abxoth Modularni dizajn i najkvalitetniji materijali prehrambene klase rezultiraju strojem koji bez kvarova može raditi desetljećima. U slučaju bilo kakvog kvara, zamjena svakog pojedinačnog elementa je izuzetno jednostavna. Automatski program čišćenja i specijalizirani proizvodi za čišćenje jamče stabilnost i sigurnost tijekom cijelog procesa proizvodnje, uz istovremeno smanjenje troškova rada i potrošnje vode. Zadatak djelatnika je samljeti kavu i staviti ju u filtar košaru. Nakon pokretanja, uređaj samostalno puni vodu, započinje i završava ekstrakciju, provodi filtraciju, ulijeva cold brew u bačvu i pokreće program čišćenja. Komplet All-In-One uključuje: - veliku košaru - 18 l bačvu x2 - protočni hladnjak - stout slavinu x2 - dvostruki regulator dušika - spojne kablove Tehnički podaci: – Dnevni kapacitet – 250 l – Kapacitet ekstrakcijske komore – 20 l – Kapacitet filtar košare – 1,2 kg – Dimenzije – 902 × 830 × 610 mm – Težina – 80/120 kg – Odvod – odvodna pumpa

Leto izdelave: 2025, stanje: novo, Dimensions (L x W x H): 3480 x 1500 x 2000 mm Weight: 5,500 kg Total power requirement: 2 kW Cold Press SOLID 3013-110 DELUXE - Pressing area: 3000 x 1350 mm - Robust hard aluminium heating plates Ijdpsv A Hk Njfx Abxsth - Total pressing pressure: 110 t - With fully utilized pressing area = 2.5 kg/cm² - With half utilized pressing area = 5.0 kg/cm² - Max. opening width: 400 mm - 8 hydraulic cylinders, Ø 70 mm - Hydraulic pump: 1.5 kW - Pressure gauge with setpoint and actual value indicator - Precision rack guide for parallel movement of pressure table - Emergency stop safety cord, CE compliant - Dimensions: 3480 x 1500 x 2000 mm - Weight: 5,500 kg

Leto izdelave: 2025, stanje: novo, Dimensions (L x W x H): 4500 x 1500 x 2000 mm Weight: 6500 kg Total power requirement: 2 kW Cold Press SOLID 4013-110 DELUXE - Pressing surface: 4000 x 1350 mm - Robust hard aluminum heating plates - Total pressing force: 130 t - With fully utilized pressing surface = 2.5 kg/cm2 - With half utilized pressing surface = 5.0 kg/cm2 - Max. opening height: 400 mm - 10 hydraulic cylinders, Ø 70 mm - Hydraulic pump: 1.5 kW - Pressure gauge with setpoint and actual value indicators - Precision rack-and-pinion guidance for synchronous movement of the pressure table - Safety pull cord, CE compliant - Dimensions: 4500 x 1500 x 2000 mm Itjdpfxsv A Hmdj Abxoh - Weight: 6500 kg

Leto izdelave: 2025, stanje: novo, Dimensions (L/W/H): 3750 x 1650 x 1970 mm Weight: 5000 kg Total power requirement: 6 kW Cold Press SOLID 3013-100 - Pressing area: 3000 x 1300 mm - Heavy-duty steel plates, 42 mm - Total pressing force: 100 t (3.1 kg/cm²) - Max. opening width: 500 mm - 6 hydraulic cylinders, Ø 100 mm - Hydraulic pump: 5.5 kW - Total power output: 5.5 kW - Precision rack-and-pinion guide for synchronous table movement - Safety pull cord Itedpfx Abov A Hkpoxjh - Dimensions: 3750 x 1650 x 1970 mm - Weight: 5000 kg

Stanje: rabljeno, Leto izdelave: 2000, Overview This cold glue labelling machine was manufactured by Krones in 2000. The machine is designed for applying cold glue labels to bottles. It is equipped with three labelling stations (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The system features an integrated Krones Checkmat inspection system for quality control and is configured for 11 bottle formats (0.5 – 1.0 l). Maintenance has been carried out as needed. Technical Data Capacity: up to approx. 15,000 bottles per hour Formats: 0.5 l – 1.0 l, 11 formats Application: cold glue labelling of bottles Configuration: 20-head rotary table, 3 labelling stations Label positions: front, back, neck/seal label Equipment: standard Krones control system Including: 3 glue pumps for the cold glue system, inspection system (Krones Checkmat), format parts, documentation Iodpfxoy Azv Ss Abxoth

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Das Ausgeben von heißen Lebensmitteln ist in der Regel mit einer Vielzahl von Gesundheits- und Sicherheitsrisiken verbunden. Diese Risiken werden durch ein vollautomatisches Abgabesystem minimiert. Die Steuerung stellt sicher, dass der Bediener keinen direkten Kontakt mit dem 90 °C heißen Produkt hat. Die automatische Beutelpresse verschließt die Beutel nach dem Befüllen. Zudem entfällt das manuelle Transportieren von Produkten über größere Entfernungen, da die verpackten Gerichte mittels eines kleinen Förderbands vom Füllbereich zum Bediener befördert werden. Dadurch werden ergonomisch ungünstige Arbeitspositionen vermieden. Ijdpeh A Hbxefx Abxeth HOT-FILL DOS 3 sorgt für gleichmäßige Portionen. Die Portionsmenge wird über das Touchscreen-Display gesteuert. Zudem lässt sich über das Display auch die Abgabegeschwindigkeit flexibel einstellen und so optimal an den Arbeitsablauf anpassen. Das vollautomatische System HOT-FILL DOS 3 saugt das Produkt direkt aus dem Kessel an und ist mit einem Temperaturalarm ausgestattet, der stets die korrekte Produkttemperatur gewährleistet.

Stanje: rabljeno, Leto izdelave: 1972, 1 used, well-maintained hydro-pneumatic semi-automatic cold circular saw for cutting aluminium, non-ferrous metals, wood and plastic Technical data: Max. saw blade diameter: 370 mm Cutting diameter: 120 mm Cutting capacity at 90°: flat 260 x 60 mm Cutting capacity at 90°: square 105 mm Cutting capacity at 45°: flat 200 x 45 mm Cutting capacity at 45°: square 90 mm 0° straight cut – longitudinal cut: yes 2 blade speed settings: 1,500 / 3,000 m/min Drive power: 1.7 / 2.6 kW Machine dimensions (L x W x H): 1,000 x 1,000 x 1,700 mm Machine weight: 700 kg Accessories / Special features: • Semi-automatic operation: After starting, the workpiece is automatically clamped by the upper clamping cylinder. Once the preset feed travel is reached, the saw blade automatically returns to the home position and the vice is released. • Infinitely variable feed • Pole-changing motor • 1 saw blade included Itsdpfx Asbwl Emobxjh • Double-sided mitre cutting • Longitudinal cut 0° • Spray mist lubrication system Special accessories: - 1 right-hand roller conveyor with heavy-duty stop, 3,500 mm and scale - 1 left-hand roller conveyor, approx. 3,500 mm Special accessories price: €1,500.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: rabljeno, Leto izdelave: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by the German company GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly for the wine industry. It is equipped with two cold glue labelling stations for applying body, neck, and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise labelling operations. Technical Data Capacity: approx. 5,000 bottles/hour Output range: approx. 1,000 – 5,500 bottles/hour Formats: - 0.75 l Bordeaux (H=309 mm, Ø74 mm) - 0.75 l Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) - 1.0 l Schlegel (H=309 mm, Ø89 mm) - 0.75 l Burgundy (H=297 mm, Ø82 mm) Application: Labelling of glass bottles (wine) Configuration: Rotary machine with 2 cold glue labelling stations Label positions: Body (front), neck ring, back Connection data: 400 V / 50 Hz / 3-phase / N / PE Isdpfxeyzcycj Abxjth Scope of Supply Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 stations Adhesive system | Krones | Glue pump Control panel | GERNEP | Touch panel

Stanje: rabljeno, Leto izdelave: 2011, Overview This rotary labelling machine (cold glue + self-adhesive labels) was manufactured in 2011 by the German company GERNEP. The machine is designed for high-speed labelling of glass bottles, especially for the spirits industry. It combines cold glue and self-adhesive labelling technologies, enabling flexible use of different types of labels, including body, back, neck ring, and auxiliary labels. The machine is equipped with 2 cold glue units and 2 self-adhesive labelling units (HERMA). Technical Data Itodpoyy Ad Ssfx Abxsh • Capacity: approx. 12,000 bottles/hour • Speed range: approx. 3,000 – 18,000 bottles/hour • Formats: 700 ml / 750 ml / 1,000 ml glass bottles • Application: Labelling of glass bottles (spirits) • Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) • Label positions: Bottle body (front), back, neck ring, additional labels • Connection data: 400 V Scope of delivery • Labelling machine | GERNEP | Labetta 6/4/22 1056 2A 2SK SD | 2011 | Rotary labelling machine with cold glue and self-adhesive units • Self-adhesive units | HERMA | 2 units, up to 70 m/min • Control system | B&R | Touchscreen control

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, CARLO SALVI 476 SV completely overhauled 4.76 x 45 mm. 450 pcs/min - New electrical system, CE compliant, with inverter and PLC - New lubrication system Iodpeh N Di Dsfx Abxjth - New motor with disc, pulley, and brake - New drawing die roller pump - New belts - Grinding/machining of all main components (slide, guides/gibs, and caps) - Replacement of pins, bushes, and nuts - New bearings - Shims for gears VISIBLE IN CALOLZIOCORTE (LC) at HBR srl, which will carry out the complete overhaul

Stanje: rabljeno, Leto izdelave: 2018, Roll laminator - GBC Ultima 65, year 2018 – Serial No. PGG0734 Maximum format width: 650 mm Hot and cold lamination Specifications: - Operation mode: Roll film laminator - Heating system: 2 heated rollers - Laminating speed (variable): up to 3,000 mm/min - Max. film thickness: up to 2 x 250 micron rolls - Photo-friendly Itsdjmk Nc Depfx Abxsh - Warm-up time: 10 minutes - Power supply: 220/240 V AC - Maximum laminating thickness: 6.0 mm - Maximum laminating width: 685 mm - Anti-jam technology - Manual reverse function - Approximate lamination time (A4): 6 seconds (with 75 micron film) - Dimensions (W x H x D): 889 x 355 x 533 mm - Weight: 62.4 kg Online video inspection via Skype available. We would be pleased to welcome you for an on-site visit – more machines in stock. Available immediately – inspection possible Located in Emskirchen / Nuremberg – testing possible

Stanje: rabljeno, Leto izdelave: 2018, Roll Laminator Cold/Hot GBC CATENA 35 Year: 2019 - Serial No.: PCG0226 Maximum Format Width: 650 mm Hot and Cold Lamination Itedpfomk Nc Iex Abxeh Specifications: • Operation Mode: Roll film laminator • Heating System: 2 heated rollers • Laminating Speed (variable): up to 3000 mm/min • Maximum Pouch Thickness: up to 2 x 250 micron rolls • Suitable for photos • Warm-up Time: 10 min • Power Supply: 220/240 V AC • Maximum Laminating Thickness: 6.0 mm • Maximum Laminating Width: 330 mm • Anti-Jam Technology • Manual Reverse • Approximate Lamination Time (A4, 75 microns): 6 seconds • Dimensions (W x H x D): 685 x 330 x 457 mm • Weight: 37.8 kg Online video inspection via Skype video is available. We would be pleased to arrange a visit – more machines available from stock. Immediately available – ready for inspection. Located in Emskirchen / Nuremberg – test runs possible.

Stanje: rabljeno, Rotacijski etiketirni stroj za etiketiranje steklenic s pomočjo dveh postaj za hladno lepilo. Proizvajalec: KRONES Model: PRONTOMATIC Leto izdelave: 1991 Zmogljivost: 10.000 steklenic/uro Iedeywckgjpfx Abxsth Vrtiljak: 12 postaj Konfiguracija: 2 x glavi za etikete na hladno lepilo Originalna električna dokumentacija. Tehnično stanje: rabljeni stroj, stanje kot na slikah.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling Itedpjuz If Nefx Abxjh - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer: PEE-WEE Type: P 24 Q Serial No. LC2403099 Year of manufacture: 2004 Rolling force: max. 24 tons Tool diameter: max. 200 mm Rolling spindle diameter: 69.85 mm Itsdpfxsh A S Htj Abxeh Tool bore diameter: 70 mm (nominal diameter) Holder length, tool length: max. 180 mm Workpiece diameter: max. 50 mm Rolling spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic motor power: approx. 3 kW Roll drive motor power: 5.5 kW Power supply: 400 Volts, 50 Hz - Swiveling rolling spindle for through-feed thread rolling - Rolling spindle speed adjustable in 4 stages via gear shift - Hydraulic system integrated in machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge rolling: Thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece to its nominal diameter. The maximum thread length is equal to the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools consist of three sections: lead-in, calibrating area, and run-out. Groove rolls have no pitch and are swiveled by the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle equals the pitch angle in the workpiece.

Stanje: rabljeno, Leto izdelave: 1996, Overview This labeling machine from Anker-Roland was manufactured in 1996 and is designed for applying cold glue labels to glass bottles. The machine is equipped with two labeling stations and four bottle plates, making it suitable for typical multiple-label applications in beverage and spirits bottling lines. The configuration allows the application of neck, front (body), and back labels. With a production capacity of approximately 3,000 bottles per hour at 0.7 l, the system is well-suited for small to medium-sized production lines. The machine includes eight format sets, covering bottle diameters from 60.5 mm to 86.5 mm, enabling flexible processing of various round bottle formats between 0.35 l and 1.0 l. Technical Data Manufacturer: Anker-Roland Machine type: Rotary cold glue labeling machine Year of manufacture: 1996 Serial number: 1058/96/065L Labeling stations: 2 Bottle plates: 4 Labeling positions: neck label, front label (body label), back label Output: approx. 3,000 bottles per hour (at 0.7 l with neck, front, and back label) Labeling technology: cold glue Bottle formats: 0.35 l; 0.5 l; 0.7 l (3 format sets); 1.0 l (3 format sets) Number of format sets: 8 Bottle diameter range: approx. 60.5 – 86.5 mm Bottle shape: round bottles Condition: used Availability: on request Itjdpfx Asyuui Uebxoh

Stanje: rabljeno, Leto izdelave: 1987, Maximum rolling pressure NA t Workpiece diameter: 38 mm Workpiece length: 500 mm Total power requirement: 24 kW Machine weight: approx. 10 t Space requirement: approx. [dimensions not specified] Max. stroke of the upper/lower tool slides: 760 mm Max. rack length: approx. 610 mm Workpiece length between centers: approx. 500 mm Max. gear/profile width: 92 mm Max. workpiece Ø: 38 mm Tailstock stroke on support (hydraulic): approx. 500 mm Module range: 0.3 to 1.3 module Total drive: approx. 24 kW - 380 V - 50 Hz Total weight: approx. 10,000 kg Accessories / Special features: - KBH workpiece feeder, positioned parallel to the machine, currently set up for loading and unloading shaft-shaped workpieces (approx. 16 mm Ø x 200 mm long) with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the clamping area, including a workpiece position monitoring unit. - Originally used for rolling external gears (Zz = 25) on so-called planetary carriers (automotive): Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. - Various accessories, separate control cabinet, separate hydraulic unit 900 L, integrated coolant system, control panel with plain-text fault display, etc. ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more cost-effective than gear hobbing. Workpieces are clamped between centers and formed using synchronized, counter-moving rack tools. Material is displaced and formed by the increasing profile height in the rack tool. In the tool's calibration zone, profile and surface finish are optimized. No profile overrun is required as with milling or shaping. The machine features an exceptionally robust design. Tool life can reach 25,000 to 100,000 pieces, even with helical gears. Ijdpfx Abjt Hw D Doxsth Condition: very good – set up in our warehouse and ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further cold rolling machines and other gear manufacturing machines always in stock.

Stanje: novo, Saw blade diameter: 300 mm Cutting capacity at 90 degrees: round 102 mm Iodpfxjfg Rlas Abxeth Cutting capacity at 90 degrees: square 90 mm Cutting capacity at 90 degrees: flat 120x80 mm Cutting capacity at 45 degrees: round 90/80 mm Cutting capacity at 45 degrees: square 80/70 mm Cutting capacity at 60 degrees: flat 90x70/85x70 mm Total power requirement: 1.5/2.0 kW Machine weight: approx. 0.135 t Space requirement: approx. 0.5 x 1.05 x 1.0 m The versatile professional metal circular saw. Outstanding in both performance and price. · For mitre cuts to the left up to 45° · Suitable for cutting steel, stainless steel, and to a limited extent, aluminium profiles · Spindle vise with double clamping arm for burr-minimized cuts · Taper safety clutch to protect saw blades · Two speeds: 33 + 66 rpm · Automatic cooling system, direct to the saw blade · Double-bearing saw head · 24 V safety switch in the handle with restart protection · Length stop, assembly tools included · Fully enclosed, robust cast construction · Mitre adjustment on operator's side · Machine base (optional) ATTENTION: Price does NOT include a saw blade!!! (Saw blade price: €93 / €123)

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90° (round): 120 mm Cutting capacity at 90° (square): 100 mm Cutting capacity at 90° (rectangular): 180 x 100 mm Working height: 925 mm Saw blade speeds: 15+30 or 30+60 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.44 t Space requirement: approx. 0.8 x 1.1 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, hydropneumatic semi-automatic (20185/20188) · Mitre cuts: left 60° / right 45° · Vise with double clamping arm · Robust prism guide for saw head, dovetail guide adjustable · Chip brush · Automatic cooling · Metal tension wheel for high power transmission · Heavy-duty, robust cast iron table Semi-automatic operation: 1. Clamp material 2. Start saw Isdpod Iin Iofx Abxjth 3. Fast lowering to material start or cut directly in series mode 4. Saw band off 5. Raise frame slightly above material 6. Open vise MPS control: · Storage of cut start/end · Display of power consumption, piece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator PLEASE NOTE: Price does not include saw blade! (Saw blade price: €204)

Stanje: novo, Saw blade diameter: 275 mm Cutting capacity at 90 degrees (round): 90 mm Cutting capacity at 90 degrees (square): 80 mm Cutting capacity at 90 degrees (flat): 100 x 70 mm Cutting capacity at 45 degrees (round): 75 mm Cutting capacity at 45 degrees (square): 70 mm Itsded Iipaspfx Abxoh Cutting capacity at 60 degrees (flat): 80 x 60 mm Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.12 t Space requirement: approx. 0.5 x 0.85 x 0.95 m The versatile professional metal circular saw. Impressive in both performance and price. • For mitre cuts to the left up to 45° • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Spindle vice with double clamping arm for burr-free cuts • Tapered safety coupling made of hardened steel to protect the saw blades • 2 speeds: 33 + 66 rpm • Automatic cooling directly onto the saw blade • Saw head mounted on double bearings • 24 V safety switch in the handle with restart protection • Length stop, assembly tools included • Enclosed cast body, robust cast components • Mitre adjustment on the operator side • Machine base (optional) ATTENTION: Price does not include saw blade!!! (Saw blade price: €70)

Stanje: novo, Saw blade diameter: 315 mm Cutting capacity at 90 degrees (round): 108 mm Cutting capacity at 90 degrees (square): 93 mm Cutting capacity at 90 degrees (rectangle): 150 x 90 mm Working height: 920 mm Saw blade speeds: 17+33 or 33+66 rpm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.36 t Space requirement: approx. 0.8 x 0.9 x 1.95 m SPECIAL PRICE!!! High-performance vertical circular saw VKS 315 HA (20154/20155) • Mitre adjustment left 60° / right 45° • Vise with double clamping arm (4-point fixation) for burr-free cuts and lateral quick adjustment • Saw table with large rotary plate and especially robust vise for optimal material clamping • Sturdy prism guide of the saw head (adjustable dovetail guide) • Automatic cooling system • Machine base with chip drawer Iodpod Iin Rsfx Abxeth • Metal handle for high clamping force • Spring pack Semi-automatic operation: 1. Start saw 2. Clamp material 3. Rapid lowering to material surface or automatic cutting for serial cuts 4. Switch off saw blade 5. Raise frame to just above the material 6. Open vise NOTE: Price is without saw blade!!! (Saw blade price: EUR 109)

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 100 mm Cutting capacity at 90 degrees: rectangular 180 x 100 mm Working height: 925 mm Saw blade speeds: 17 - 70 rpm Total power requirement: 3.0 kW Space required: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20195) · Mitre cuts: left 60° and right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large gear ratio, integrated in a robust cast housing to achieve optimal cutting results · Vice with double clamping arm for burr-free cuts, additionally with lateral quick adjustment for mitre changes · Precision prismatic guide for the gear head, laterally adjustable · Particularly sturdy base frame with integrated automatic cooling system · Large chip drawer · Chip removal brush integrated in the saw blade guard CNC Control: Itodpfx Aed Iin Esbxeh · With keypad for over 90 different sawing programs, with 99 subprograms for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Preselection of 3 different material feed rates · Visualization of the entire work process with simple data entry NOTE: Price does not include saw blade! (Saw blade price: 204,- EUR)

Stanje: novo, Premer žaginega lista 250 mm Območje reza pri 90 stopinjah: okroglo 80 mm Območje reza pri 90 stopinjah: kvadratno 70 mm Območje reza pri 90 stopinjah: ploščato 95x60 mm Območje reza pri 45 stopinjah: okroglo 70 mm Območje reza pri 45 stopinjah: kvadratno 60 mm Območje reza pri 60 stopinjah: ploščato 65x60 mm Skupna potrebna moč 1,0 kW Teža stroja pribl. 0,075 t Prostorska zahteva pribl. 0,3 x0,8 x0,75 m AKCIJSKA CENA!!! Idealna krožna žaga za kovino za delavnico in montažo • Za poševne reze levo do 45° • Za rezanje jeklenih, inox in omejeno aluminijastih profilov Itsdpfxsd Iipbj Abxeh • Vpenjalna glava z dvojnim vpenjalnim krakom za reze z malo ostružkov • Po izbiri z motorjem 230 V ali 400 V • Samodejno hlajenje neposredno na žagini list • Dvojno ležajen žagini glavi • Varnostno stikalo 24 V v ročaju z zaščito pred ponovnim zagonom • Meilnik dolžine, montažno orodje • Podnožje (opcija) dodatno 172,-EUR POZOR: Cena je brez žaginega lista!!! (Cena žaginega lista 62,-EUR)