Hidravličnim Zemlja Vaje nakup rabljenega (311)

Stanje: novo, Shaft diameter: 180 mm Upper roll diameter: 60 mm Ijdpfxjd Ab H Nj Aa Uoar Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical Data: - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made from high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working positions - Hardened standard rolls - Mobile control panel - Angle side guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit, 7" screen, EURO 9,000 HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.9 1/2”x2.7 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength

Stanje: rabljeno, Tondeuse autoportée, ETESIA type Hydro 124 D Année de fabrication : 2003 Puissance : 15,5 kW Largeur de coupe : 1240 mm Bac de ramassage : 600 litres = plus de 100 kg d’herbe Rayon de braquage : 1250 mm Vitesse de déplacement et de travail : max. 16 km/h Moteur diesel 3 cylindres Lombardini FOCS 903 Cylindrée : 916 cm³ Puissance : 22 ch à 3600 tr/min - Refroidissement par eau - Deux lames contrarotatives de 65 cm de long avec un recouvrement de 6 cm - L’herbe est redressée avant la coupe grâce à une forte aspiration - Éjection centrale arrière - Vidange en hauteur hydraulique commandée depuis le siège conducteur via un interrupteur à bascule - Réglage électromotorisé de la hauteur de coupe de 44 à 140 mm - Traction hydrostatique avec entraînement des roues arrière par moteurs hydrauliques Iedpfx Asy Ai Ntoa Usar - Blocage hydraulique du différentiel - Direction assistée hydraulique - Double raccord hydraulique pour équipements frontaux - Colonne de direction réglable - Compteur horaire : 1539 heures de fonctionnement Largeur totale : 1280 mm Longueur : 2800 mm Poids : 716 kg Bon état

Stanje: novo, Shaft diameter: 580 mm Working speed: 3-6 m/min Motor power: 30 kW Length: 2760 mm Width: 2310 mm Height: 2680 mm Approx. weight: 14,400 kg Technical specifications: - Welded frame made of steel construction - 3 rollers driven - Hardened and ground shafts made from high-strength special steel - Rollers are hardened and ground - Horizontal and vertical working position - Standard hardened rollers - Mobile control panel - Angular side guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: Isdsh Alh Hjpfx Aa Usar - STANDARD digital display - NC unit 10Screen EURO 11,500,--

Stanje: rabljeno, skupna masa: 398 kg, skupna dolžina: 500 mm, skupna širina: 500 mm, skupna višina: 820 mm, Hohenstein / WVL Vpenjalna kocka z Roemheld hidravličnim vijačnim vpenjalnim modulom Montažne luknje: 4 Luknje za razmik: 320 mm Razmik modula Roemheld: 170 mm Od zgoraj do prvega modula: 120 mm Dolžina: 500 mm Širina: 500 mm Višina: 820 mm Teža: 398 kg Za vprašanja o stroju smo vam na voljo po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled naše zaloge. Ijdpfsywzamex Aa Uoar

Stanje: rabljeno, Hydraulic Scissor Lift Table WEIDMANN Type E5/13-1 Serial No. 30403339 Year of manufacture 1982 / 2007 Iaedpfx Aajhlnzno Ujr Load capacity: 500 kg Platform size: 2000 x 1200 mm Lift: max. 1280 mm Closed height (table down): 290 mm Extended height (table up): max. 1570 mm Table height with safety support: 1430 mm Lifting speed: 1280 mm in 25 sec. Lowering speed: 1280 mm in approx. 0 to 15 sec. Hydraulic working pressure: approx. 130 bar Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Rotary switch on the hydraulic power pack for up and down - Steplessly adjustable lowering speed via throttle valve - 1 lift cylinder - Hydraulic power pack (year 2007) with separate tank - Safety guard frame with limit switches Net weight: 660 kg Good condition

Stanje: rabljeno, Technical Details: Isdpfx Aasvgbgae Ujar Sheet width: 1000 mm Sheet thickness: 3.0 mm Minimum sheet thickness: 0.5 mm Frame opening: 920 mm Number of straightening rollers: 4 pcs. top / 4 pcs. bottom Roller diameter: approx. 75 mm Number of rollers: 2 pcs. top and 2 pcs. bottom Machine weight approx.: 6.5 t Dimensions (L x W x H): 3.8 x 2.2 x 2.1 m This is a plate straightening machine with hydraulic feed. Further features: 4 top straightening rollers Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 bottom straightening rollers Ø 75 x 830 mm, fixed, hydraulic 4 extraction rollers Ø 110 x 480 mm, 2 adjustable at the top (approx. 20 mm) and 2 at the bottom, hydraulic Roller mounts Infeed height 1400 mm Equipped with hydraulic unit External operation Recommendation: Complete as a strip processing line (decoiler + loading device + straightening machine with hydraulic feed) available for sale, optionally together with stock no. 0100572.

Stanje: novo, Sheet length: 2100 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 5500 kg Dimensions (LxWxH): 3110 x 2195 x 1770 mm Our strong brand KK Kletzer CNC GUILLOTINE SHEAR swing beam execution Model SWT has everything you need for cutting. With our swing beam design, we have also raised the standard and supply our guillotine shears with automatic blade gap adjustment via the ELGO P40T touchscreen control at no additional cost. NC guided guillotine shear KKI Technological advantages - Fast and precise cuts - Robust, long-lasting frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standard - Use of components from well-known manufacturers - Low unit costs Technical data: Sheet thickness: 6 mm Cutting length: 2,100 mm Cutting angle: 1.5° Iaodpfefhlbdjx Aa Uor Number of hold-downs: 15 Backgauge: 1,000 mm (CNC-driven) Motor power: 11 kW Strokes per minute: 18 Throat depth: 50 mm Oil tank: 200 liters Length: 3,110 mm Width: 2,195 mm Height: 1,770 mm Weight: 5,500 kg • Robust swing beam construction • Blade gap adjustment via control system - Backgauge - Blade gap - Cutting length • Ballscrew spindles for backgauge • Balls in the table • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm folding finger guard Option: Pneumatic sheet support, EURO 3,900 We have many references!

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Weight: 8,500 kg Equipment: Swing cut system NC preset control ELGO P 40 T Touch Iaedsd Ab Hhepfx Aa Usr with backgauge and cutting gap adjustment from the front via the control system Motorized backgauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade with four cutting edges, reversible Upper blade with two cutting edges, reversible Qualified customer service Operating instructions in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Back gauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Features and Equipment: Swing cut design NC pre-selection control ELGO P 40 T Touch with back gauge and cutting gap adjustment operated from the control panel motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swivel arm hydraulic hold-downs arranged close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball rollers foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot easy blade changing and regrinding adjustable cutting length for efficient processing Ijdpfx Aaod Ab His Ujar bottom blade usable 4 times (quadruple rotating) top blade usable 2 times (reversible) qualified customer service Operating manual in ENGLISH Machine and equipment comply with CE regulations

Stanje: novo, Shaft diameter: 60 mm Upper roll diameter: 215 mm Lower roll diameter: 215 mm High-performance hydraulics: 16 l/min Working speed: 4 m/min Motor power: 1.5 kW Length: 1000 mm Width: 1400 mm Height: 1650 mm Approx. weight: 950 kg Technical Data: - Welded steel frame - 3 rolls are driven by motor - Hardened shafts made of special steel - Upper roll hydraulically adjustable - Horizontal and vertical operating positions - Standard rolls - Guide rolls - Equipped with a brake motor for precision bending - Portable control panel Options: - Digital readout EURO 700 - NC unit EURO 7,000 - Lateral angle guide rolls EURO 1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls Iasdpfx Aed Ab H Roa Ujr 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with the special beam bending attachment • Capacities are based on a plate yield strength of 260 N/mm²

Stanje: novo, Sheet length: 4100 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Weight approx.: 15,500 kg Dimensions (LxWxH): 4120 x 2240 x 2235 mm Iajdpfjd Tm Rcox Aa Usr Our robust KKKletzer CNC GUILLOTINE SHEAR, swing beam design Model SWT offers everything needed for cutting applications. We have also raised the bar with our swing beam models, supplying our guillotine shears with automatic cutting gap adjustment via the ELGO P40T touchscreen control, at no additional cost. NC link-guided guillotine shear KK Kletzer Technological Advantages - Fast and precise cuts - Rigid, long-lasting frame structure - Automatic cutting gap adjustment - Easy operation - Low maintenance costs - High safety standards - Use of components by renowned manufacturers - Low unit costs Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,100 mm Cutting angle: 2.3° Number of hold-downs: 19 Backgauge: 1,000 mm via CNC Motor power: 30 kW Strokes per min: 8 Throat depth: 50 mm Length: 5120 mm Width: 2240 mm Height: 2235 mm Weight: 15,500 kg • Robust swing beam design • Cutting gap adjustment via control system - Backgauge - Cutting gap - Cutting length • Ball screw spindles for the backgauge • Balls integrated into the table • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Flip-up finger guard (1,000 mm high) Option: Pneumatic sheet support, EURO 4,900 We have many references!

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 16.0 mm Frame gap: 3,100 mm Total power requirement: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,200 x 2,050 x 2,100 mm Technical Data: Sheet thickness: 16 mm Cutting length: 3,200 mm Cutting angle: 2° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,150 mm Iaodpfxjd Ab Hls Aa Usr Height: 2,200 mm Weight: 12,900 kg Equipment: Swing beam shear design NC preselection control ELGO P40 Touch with backgauge and blade gap adjustment via controller (front access) Motorized backgauge up to 1,000 mm Clear control panel mounted on swing arm Hydraulic hold-downs mounted close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for economical processing Lower blade, 4-fold usable Upper blade, 2-fold usable Qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Stanje: novo, Shaft diameter: 315 mm Working speed: 7 m/min Motor power: 7.5 kW Length: 2000 mm Width: 1450 mm Height: 1700 mm Weight approx.: 3650 kg Technical specifications: - Welded frame made of steel construction - 3 rolls are driven - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel Iodpfx Aaeh Alico Uear - Angle side guide rollers - Equipped with brake motor for precision bending - Digital readouts (2 pcs) Options: - STANDARD digital readout - NC unit 7 Screen EURO 9,000,--

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 10 mm Total power requirement: 11 kW Weight approx.: 8,100 kg Dimensions (LxWxH): 4,000 x 1,950 x 1,900 mm Iedpsd Ab Hnofx Aa Uoar Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 11 kW Length: 4,000 mm Width: 1,950 mm Height: 1,900 mm Weight: 8,100 kg Equipment: Swing beam design NC preset control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the controller at the front Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swing arm Hydraulic hold-downs arranged close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball inserts Foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for economical processing Bottom blade with 4 usable cutting edges Top blade with 2 usable cutting edges Qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Stanje: novo, Angle iron/leg length: 60 x 60 x 6 Double-T beam across x-axis: UPN 80, UNP 30 U-channel across x-axis: UPN 65, UPN 30 Ieded Acazepfx Aa Uear Total power requirement: 3 kW Weight approx.: 1.4 t Dimensions (LxWxH): 1200 x 1100 x 800 mm - 4 rollers, 2 driven rollers - 3 hydraulic adjustments - Universal rollers - Lateral guide rollers - Control panel

Stanje: novo, Sheet length: 4100 mm Sheet thickness: 6.0 mm Total power requirement: 15 kW Approximate weight: 10,200 kg Dimensions (LxWxH): 4120 x 2195 x 1770 mm Our powerful brand KK Kletzer CNC GUILLOTINE SHEAR Swingshear Design Model SWT has everything you need for cutting. We have also raised the standard in the swingshear design and now deliver our guillotine shears, even in the swingshear version, with automatic blade gap adjustment via the ELGO P40T touchscreen control at no extra cost. NC Linkage-Guided Guillotine Shear KKI Technological advantages: • Fast and precise cuts • Stable, durable frame construction • Automatic blade gap adjustment • Easy operation • Low maintenance costs • High safety standards • Use of components from renowned manufacturers • Low cost per part Technical Data: Sheet thickness: 6 mm Cutting length: 4,100 mm Cutting angle: 1.5° Number of hold-downs: 19 Backgauge: 1,000 mm via CNC Motor power: 15 kW Strokes per min: 12 Throat depth: 50 mm Length: 5,120 mm Width: 2,195 mm Height: 1,770 mm Weight: 10,200 kg • Robust swingshear design • Blade gap adjustment via control - Backgauge - Blade gap - Cutting length • Ball screw spindles for backgauge • Balls on the table • Side gauge 1,500 mm • 2 support arms, 1,000 mm each Iaedpfsd Tm Rbjx Aa Uor • Cutting line illumination • 1,000 mm fold-up finger guard Option: Pneumatic sheet support, EURO 4,900,-- We have numerous references!

Stanje: novo, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Approx. weight: 500 kg Technical Data: - Welded steel frame - 3 rolls are motor-driven - Hardened shafts made of special steel - Upper roll hydraulically adjustable Iaedpfod Ab H Sox Aa Uer - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display €700 - NC unit €7,000 - Angular side guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN80 UPN30 800 400 Optional Rolls * 15 UPN80 UPN30 1200 600 Standard Rolls * * Special washer (spacer) may be required / Only with special Beam Bending Attachment • Capacities are based on 260 N/mm² yield strength of plate

Stanje: novo, Shaft diameter: 480 mm Working speed: 3-6 m/min Motor power: 22 kW Length: 2500 mm Width: 2200 mm Height: 2300 mm Weight approx.: 9300 kg Technical data: - Welded frame made of steel construction - 3 driven rolls - Hardened and ground shafts made of high-strength special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - Lateral angle guide rolls - Equipped with brake motor for precision bending - Digital readouts (2 units) Options: - STANDARD digital readout - NC unit 10 Screen EURO 11,500,-- Iodpfx Aoh Alh Rsa Ujar

Stanje: novo, Shaft diameter: 580 mm Working speed: 2-5 m/min Motor power: 30 kW Length: 3000 mm Width: 2310 mm Height: 3100 mm Weight approx.: 16,500 kg Technical specifications: - Welded steel frame construction - 3 driven rollers - Hardened and ground shafts made of high-strength special steel - Rollers are hardened and ground - Horizontal working position - Standard hardened rollers Isdpfx Aeh Alh Usa Uear - Mobile control panel - Lateral angle guide rollers - Brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit 10” screen EURO 11,500,-- -

Stanje: novo, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total installed power: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm Technical data: - Sheet thickness: 13 mm - Cutting length: 3,200 mm - Cutting angle: 2.0° - Backgauge: motorized, 1,000 mm - Motor power: 18.5 kW - Length: 4,200 mm - Width: 2,050 mm - Height: 2,100 mm - Weight: 11,700 kg Features: - Swing cut design - NC preselection control ELGO P 40 T Touch - With backgauge and adjustable blade gap from the front using the EURO P 40 Touch control - Motorized backgauge up to 1,000 mm - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting line - Foot switch - Blade gap adjustment - Cutting line illumination - Wide support table with ball transfers - Folding finger guard, 1,000 mm - 1 side stop with T-slot - 2 sheet support arms with T-slot - Easy replacement and regrinding of the blades - Adjustable cutting length for efficient processing - Lower blade can be turned 4 times - Upper blade can be turned 2 times Iajdjd Ab Hmepfx Aa Uor - Qualified customer service - Operating manual in ENGLISH - Machine and equipment in accordance with CE regulations

Stanje: novo, Angle iron/leg length: 80 x 80 x 8 Double-T beam across x-axis: IPN 120, IPN 80 U-beam across x-axis: UPN 140 Total power requirement: 4 kW Approx. weight: 1,700 kg Dimensions (LxWxH): 1,450 x 1,000 x 1,400 mm Technical data Shaft diameter: 80 mm Roll diameter: 245 mm Driven rolls: 3 Motor power: 4 kW Speed: 6 m/min. Bending performance (cross-section/min. diameter): Flat bar upright: 100x20 mm / 2,000 mm; 80x20 mm / 800 mm; 30x10 / 300 mm Flat bar flat: 125x25 mm / 600 mm; 60x5 mm / 300 mm Square bar: 45x45 mm / 500 mm; 15x15 mm / 380 mm Iasdpfx Ajd Ab H Tea Usr Round bar: Ø 50 mm / 500 mm; Ø 15 mm / 380 mm Tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1 mm / 380 mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Rectangular tube upright: 80x25x3 mm / 800 mm; 25x15x2 mm / 350 mm Square tube: 70x70x3 mm / 1,300 mm; 25x25x2 mm / 350 mm Angle iron leg outwards: 80x80x8 mm / 800 mm; 30x30x3 mm / 400 mm Angle iron leg inwards: 70x70x7 mm / 700 mm; 30x30x3 mm / 450 mm UPN leg outwards: UPN 140 / 1,600 mm; UPN 120 / 900 mm; UPN 100 / 800 mm UPN leg inwards: UPN 140 / 1,600 mm; UPN 120 / 1,000 mm; UPN 100 / 800 mm IPN flat: IPN 120 / 600 mm; IPN 80 / 400 mm Equipment - 3 motor-driven rolls - Rigid welded steel construction - Hydraulic adjustment of the two bottom rolls - Digital display of the bottom roll positions on a separate control panel - Side guide rolls adjustable over 3 axes - Usable in horizontal and vertical positions - Forward and reverse drive - Machine and equipment comply with CE regulations Options: - NC Unit 7 Screen EUR 9,000 We have more than 190 references!

Stanje: rabljeno, Details on request. Iasdpfx Ajb E Evboa Uer

Stanje: delavnici obnovljeno (rabljeno), Technical data Feeder bunker with hydraulic moving floor and bag opener for recyclables from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Iodpfx Asyizxrsa Usar Condition of the machine: The feeder bunker with bag opener was in operation at a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the bunker using wheel loaders, bags were opened via the bag opener, and materials were discharged dosed either to a sorting plant or for further processing. The system functioned flawlessly until disassembly and was replaced by a larger machine with higher throughput. The machine was dismantled in our workshop into individual components, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and/or the following spare parts were renewed: – Disassembly of the feeder bunker and bag opener into individual parts. Cleaning, partial sandblasting, priming, and painting of steel components. – Various wear and cover plates were newly manufactured and installed. – Cutting off worn ends (approx. 40 cbm) of the moving floor tubes. Welding new tubes and smoothing the moving floor tubes. – Replacement of all sliding plastic plates for the hydraulic moving floor. – Removal of the hydraulic unit from the moving floor, complete drainage of the hydraulic oil tank, replacement of oil filters, refilling with new hydraulic oil. – Replacement of all three hydraulic manifolds, all valves, oil sight glass, and all hydraulic hoses on the hydraulic power unit. – All three hydraulic cylinders of the moving floor: seals and hydraulic hoses replaced. – All six end switches (proximity sensors) of the moving floor were replaced. – Conveyor chains left and right of the scraper conveyor replaced. – Seven scraper bars of the scraper conveyor replaced. – Drive motor for the bag opener rotors replaced. – All nine pneumatic cylinders for the pressure pipes replaced. All pneumatic lines and fittings renewed. – All sliding plastic plates for the hydraulic adjustment of the bag opener renewed. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without the bag opener if required. – Side impact protection plates on both sides renewed. – Various wear parts of the bag opener replaced. – The entire system was completely rewired and reconnected electrically. – The system control in the control cabinet was reverted by BRT Hartner to standalone single unit operation and the standard program was reloaded. – The system was commissioned and tested by BRT Hartner; see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. We accept no liability for the technical specifications or possible errors.

Stanje: rabljeno, Combination filter (diatomaceous earth and sterilizing filter) for beer filtration with hydraulic compression, 100 x 100 cm filter plates, and external riser pipes. Machine (additional info): Combination filter Capacity: 120 hl/h Plate size: 100 cm edge length Length: 7000 mm Width: 1500 mm Height: 1500 mm Iasdpfx Asvcqlwja Uor Orientation/position: horizontal Base construction: mounted on a steel frame, standing on feet Equipment: 31 diatomaceous earth layers (32 frames), 50 sterilizing filter layers, 4 pressure gauges (10 bar), 6 lanterns, riser pipes, diatomaceous earth discharge screw (Allweiler), original gravity measurement, flow measurement, 3 x turbidity measurement (inlet, outlet KG filter, outlet EK filter) Spare parts: 295 sealing rings for filter plates, 3 diatomaceous earth filter support plates.

Stanje: dober (rabljeno), Mower lift, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, lift pulley, deflection pulley, rope pulley, steel rope pulley, cable deflection pulley, rope pulley bracket, hydraulic lift pulley Iaedpjv Iyciefx Aa Uer - Mower lift: lift pulley with hydraulic cylinder - Hydraulic cylinder: Bosch, stroke 190 mm - Quantity: 2 mower lifts available - Price: per unit - Shipping dimensions: 480/130/H67 mm - Total weight: 6.1 kg/unit